Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Component sizing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Hypothesis tests on Rayleigh wave radiation pattern shapes: a theoretical assessment of idealized source screening

SUMMARY Shallow seismic sources excite Rayleigh wave ground motion with azimuthally dependent radiation patterns. We place binary hypothesis tests on theoretical models of such radiation patterns to screen cylindrically symmetric sources (like explosions) from non-symmetric sources (like non-vertical dip-slip or non-VDS faults). These models for data include sources with several unknown parameters, contaminated by Gaussian noise and embedded in a layered half-space. The generalized maximum likelihood ratio tests that we derive from these data models produce screening statistics and decision rules that depend on measured, noisy ground motion at discrete sensor locations. We explicitly quantify how the screening power of these statistics increase with the size of any dip-slip and strike-slip components of the source, relative to noise (faulting signal strength) and how they vary with network geometry. As applications of our theory, we apply these tests to (1) find optimal sensor locations that maximize the probability of screening non-circular radiation patterns and (2) invert for the largest non-VDS faulting signal that could be mistakenly attributed to an explosion with damage, at a particular attribution probability. Finally, we quantify how certain errors that are sourced by opening cracks increase screening rate errors. While such theoretical solutions are ideal and require future validation, they remain important in underground explosion monitoring scenarios because they provide fundamental physical limits on the discrimination power of tests that screen explosive from non-VDS faulting sources.

58 GEOSCIENCES↗

Electric-field enhancement caused by subwavelength-sized particles located on the surface of multilayer dielectric mirrors

A laser pulse impinging on the surface of an optical component can interact with particles, such as contamination debris, to produce a scattered electric field, which, either by itself or combined with the incident laser field, coherently can significantly increase the local field intensity. This effect can be of critical importance as it can reduce the laser-induced–damage threshold of the affected component. In this work, we use a field-propagation code to improve understanding regarding the factors that determine the magnitude and location of the electric-field enhancement for the case of subwavelength-sized particles located on the surface of multilayer dielectric mirrors.

47 OTHER INSTRUMENTATION↗

Substitution of stable isotopes in Chlorella

Replacement of biologically important isotopes in the alga Chlorella by corresponding heavier stable isotopes produces increasingly greater deviations from the normal cell size and changes the quality and distribution of certain cellular components. The usefulness of isotopically altered organisms increases interest in the study of such permuted organisms.

Flaumenhaft, E.↗

Design features and results from fatigue reliability research machines.

The design, fabrication, development, operation, calibration and results from reversed bending combined with steady torque fatigue research machines are presented. Fifteen-centimeter long, notched, SAE 4340 steel specimens are subjected to various combinations of these stresses and cycled to failure. Failure occurs when the crack in the notch passes through the specimen automatically shutting down the test machine. These cycles-to-failure data are statistically analyzed to develop a probabilistic S-N diagram. These diagrams have many uses; a rotating component design example given in the literature shows that minimum size and weight for a specified number of cycles and reliability can be calculated using these diagrams.

Lalli, V. R.↗

Interpretation of epsilon Aurigae. II - Infrared excess, secondary light variations, and plausible formation of a planetary system

Infrared excess based on the disk model proposed in a previous paper was computed. It was found that the disk alone will emit infrared radiation below the margin of detection. However, if individual condensations are present, the combined result of the disk proper and the condensations yields results of infrared excesses that are consistent with observations. The presence of condensations also makes the secondary light variation understandable. An elementary theory is developed that analyzes such light variations. The result of the analysis yields the size of the orbit of the condensation around the secondary component.

Huang, S.-S.↗

Digital video image system

Interactive recording and display device acts as very-high-speed data-input/output interface between analog (video) signals and standard digital-computer components. System can be used with various picture and memory sizes and can be controlled manually or by computer.

Neely, P. L.↗

Lunar regolith - Petrology of the less than 10 micron fraction

Petrographic data for the less than 10 micron fraction from four lunar surface soils are presented in an attempt to characterize the modal mineralogy of this fraction. Individual grains were studied with a scanning/transmission electron microscope with an attached energy dispersive spectrometer. Energy dispersive analytical data are presented, and comparative modal petrology of the soils is shown. Also presented are grain size histograms and diagrammatic representation of comparative modal data for the soils, as well as the feldspathic glass/mafic glass ratio, plagioclase/mafic mineral ratio, and SiO2 modal percent for different size fractions of the four types of soil. The modal results are consistent with chemical data regarding feldspathic and KREEP enrichment in the finest fraction. Grain-size distributions are inconsistent with a fine-grained exotic component derived from distant sources.

Devine, J. M.↗

Large space structures raise testing challenges

The testing approaches and techniques necessary for combined ground and space verification for large space structures (LSS) to be deployed and assembled in space are explored. The size of LSS precludes full ground tests, thereby requiring assemblies, components, and their interactions to be examined on orbit. Ground tests involving drop tests and zero-g aircraft flights can be performed with scale models, but need computational compensation to eliminate gravitational and torque effects that do not occur in space. Structural rigidity also varies from ground to space, and can partly be accounted for in ground tests by using cable supports, although numerical modelling must remove the effects of the cables' presence. Long-term funding is recommended for on-orbit tests of components in order to build a data base for later testing and actual construction of LSS.

Hanks, B. R.↗

Models of the hard X-ray spectrum of AM Herculis and implications for the accretion rate

Phenomenological fits to the hard X-ray spectrum of AM Herculis left unexplained the high equivalent width (0.8 + or - 0.1 keV) of Fe K alpha emission. A purely thermal origin implies a much steeper spectrum than was observed. With Monte Carlo calculations, scattering and fluorescent line production in a cold or partially ionized accretion column of hard X-rays emitted at the base were investigated. The strength of the iron emission and the flat spectral continuum can be explained by the effects of fluorescence and absorption within the accretion column and the surface of the white dwarf on a thermal X-ray spectrum. Thomson optical depths across the column in the range 0.2 to 0.7 are acceptable. The accretion rate and gravitational power can be deduced from the optical depth across the column, if the column size is known, and, together with the observed hard X-ray and polarized light luminosities, imply a lower limit for the luminosity in the UV to soft X-ray range, for which the observations give model-dependent values. Estimates of the column size differ by a factor of 40. Small spot sizes and low luminosities would be consistent with the soft component being the expected reprocessed bremsstrahlung and cyclotron radiation, although the constraint of matching the spectrum confines one to solutions with fluxes exceeding 20% the Eddington limits.

Swank, J. H.↗

Very Long Baseline Interferometry observations of 257 extragalactic radio sources in the ecliptic region

Very Long Baseline Interferometry observations of 257 extragalactic radio sources with 10 deg of the ecliptic have been conducted at a frequency of 2.29 GHz. Compact components with flux densities greater than 0.1 Jy and angular sizes smaller than the fringe spacings of 2.5 and 3.2 milliarsec were detected in 144 radio sources. This survey was conducted to find compact radio sources to form a high accuracy reference frame for planetary spacecraft navigation. This stable reference frame may also be useful for long-term studies of planetary dynamics.

Wehrle, A. E.↗

Regenerative fuel cell systems for space station

Regenerative fuel cell (RFC) systems are the leading energy storage candidates for Space Station. Key design features are the advanced state of technology readiness and high degree of system level design flexibility. Technology readiness was demonstrated through testing at the single cell, cell stack, mechanical ancillary component, subsystem, and breadboard levels. Design flexibility characteristics include independent sizing of power and energy storage portions of the system, integration of common reactants with other space station systems, and a wide range of various maintenance approaches. The design features led to selection of a RFC system as the sole electrochemical energy storage technology option for the space station advanced development program.

Hoberecht, M. A.↗

New dimension analyses with error analysis for quaking aspen and black spruce

Dimension analysis for black spruce in wetland stands and trembling aspen are reported, including new approaches in error analysis. Biomass estimates for sacrificed trees have standard errors of 1 to 3%; standard errors for leaf areas are 10 to 20%. Bole biomass estimation accounts for most of the error for biomass, while estimation of branch characteristics and area/weight ratios accounts for the leaf area error. Error analysis provides insight for cost effective design of future analyses. Predictive equations for biomass and leaf area, with empirically derived estimators of prediction error, are given. Systematic prediction errors for small aspen trees and for leaf area of spruce from different site-types suggest a need for different predictive models within species. Predictive equations are compared with published equations; significant differences may be due to species responses to regional or site differences. Proportional contributions of component biomass in aspen change in ways related to tree size and stand development. Spruce maintains comparatively constant proportions with size, but shows changes corresponding to site. This suggests greater morphological plasticity of aspen and significance for spruce of nutrient conditions.

Woods, K. D.↗

EZ Pegasi - The last pieces of the puzzle

Based on UBV differential photometric observations carried out at the Braeside Observatory between October 19, 1984 and January 11, 1985, it is shown that EZ Peg is in synchronous rotation with a photometric period of 11.6626 days. The orbital solution of Griffin (1985) is in good agreement with the present results, and it is employed to analyze the emission properties of the Ca II and H-alpha emission in the system. It is suggested that the emission of the system is almost entirely associated with the primary component, and the two stars appear to be similar in size and luminosity.

Howell, S. B.↗

An experimental study on the effects of tip clearance on flow field and losses in an axial flow compressor rotor

Detailed measurement of the flow field in the tip region of a compressor rotor was carried out using a Laser Doppler Velocimeter (LDV) and a Kiel probe at two different tip clearance heights. At both clearance sizes, the relative stagnation pressure and the axial and tangential components of relative velocities were measured upstream, inside the passage and downstream of the rotor, up to about 20 percent of the blade span from the annulus wall. The velocities, outlet angles, losses, momentum thickness, and force defect thickness are compared for the two clearances. A detailed interpretation of the effect of tip clearance on the flow field is given. There are substantial differences in flow field, on momentum thickness, and performance as the clearance is varied. The losses increase linearly within the passage and their values increase in direct proportion to tip clearance height. No discernable vortex (discrete) is observed downstream of the rotor.

Lakshminarayana, B.↗

Application of superconducting technology to earth-to-orbit electromagnetic launch systems

Benefits may occur by incorporating superconductors, both existing and those currently under development, in one or more parts of a large-scale electromagnetic launch (EML) system that is capable of delivering payloads from the surface of the Earth to space. The use of superconductors for many of the EML components results in lower system losses; consequently, reductions in the size and number of energy storage devices are possible. Applied high-temperature superconductivity may eventually enable novel design concepts for energy distribution and switching. All of these technical improvements have the potential to reduce system complexity and lower payload launch costs.

Hull, J. R.↗

Two-Thumbed Robot Hand

Robot hand includes thumblike members on left and right sides and fingerlike member at middle. Configuration of digits enables hand to adapt to variously shaped objects, grasp them robustly and reliably, and manipulate them. Reduces complexity of control mechanisms and provides kinesthetic perception of shapes of grasped objects. Mechanical hand with two thumbs and middle finger made from commercially available components. With specially designed dc motors and assemblies of gears, size of hand reduced considerably. Suited to handling objects in industrial tasks.

Lee, Sukhan↗

Optimal focal-plane restoration

Image restoration can be implemented efficiently by calculating the convolution of the digital image and a small kernel during image acquisition. Processing the image in the focal-plane in this way requires less computation than traditional Fourier-transform-based techniques such as the Wiener filter and constrained least-squares filter. Here, the values of the convolution kernel that yield the restoration with minimum expected mean-square error are determined using a frequency analysis of the end-to-end imaging system. This development accounts for constraints on the size and shape of the spatial kernel and all the components of the imaging system. Simulation results indicate the technique is effective and efficient.

Reichenbach, Stephen E.↗

A microwave scattering model for layered vegetation

A microwave scattering model was developed for layered vegetation based on an iterative solution of the radiative transfer equation up to the second order to account for multiple scattering within the canopy and between the ground and the canopy. The model is designed to operate over a wide frequency range for both deciduous and coniferous forest and to account for the branch size distribution, leaf orientation distribution, and branch orientation distribution for each size. The canopy is modeled as a two-layered medium above a rough interface. The upper layer is the crown containing leaves, stems, and branches. The lower layer is the trunk region modeled as randomly positioned cylinders with a preferred orientation distribution above an irregular soil surface. Comparisons of this model with measurements from deciduous and coniferous forests show good agreements at several frequencies for both like and cross polarizations. Major features of the model needed to realize the agreement include allowance for: (1) branch size distribution, (2) second-order effects, and (3) tree component models valid over a wide range of frequencies.

Karam, Mostafa A.↗