SEARCH · Engineering Papers

Results for “Closure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

All sources NASA NTRS DOE OSTI

NASA NTRS1984

Delamination growth analysis in quasi-isotropic laminates under loads simulating low-velocity impact

A geometrically nonlinear finite-element analysis has been developed to calculate the strain energy released by delaminating plates during impact loading. Only the first mode of deformation, which is equivalent to static deflection, was treated. Both the impact loading and delamination in the plate were assumed to be axisymmetric. The strain energy release rate in peeling, GI, and shear sliding, GII, modes were calculated using the fracture mechanics crack closure technique. Energy release rates for various delamination sizes and locations and for various plate configurations and materials were compared. The analysis indicated that shear sliding was the primary mode of delamination growth. The analysis also indicated that the midplane (maximum transverse shear stress plane) delamination was more critical and would grow first before any other delamination of the same size near the midplane region. The delamination growth rate was higher (neutrally stable) for a low toughness (brittle) matrix and slower (stable) for high toughness matrix. The energy release rate in the peeling mode, GI, for a near-surface delamination can be as high as 0.5GII, and can contribute significantly to the delamination growth.

Shivakumar, K. N.↗

NASA NTRS1982

Calculation of pressure statistics in turbulent free shear flows by direct numerical simulation

Accurate numerical simulations of turbulent free shear flows were performed in order to study the behavior of certain critical turbulence quantities which have been difficult to measure in the laboratory. The three-dimensional time-dependent nonlinear Navier-Stokes equations are solved by the direct numerical simulation technique without turbulence modeling or ad hoc closure assumptions. The pressure interaction terms were factored into diffusion and return-to-isotropy components according to two models. Simulations of the evolution of a turbulent wake with and without swirl present were performed at sufficiently high Reynolds numbers to insure that the flows were strongly nonlinear and turbulent, but low enough so that all scales of motion containing significant energy are adequately resolved. It is noted that the presence of swirl tends to enhance the amplitude of the rms pressure levels.

Metcalfe, R. W.↗

NASA NTRS1984

Integral boundary-layer models for turbulent separated flows

Two-dimensional, integral boundary-layer methods of the entrainment and dissipation type, with closure relationships which account for turbulent separated flows through the velocity and turbulence models, are developed. Kinematic shape factor relations used in the two methods are evaluated by comparison with recently obtained experimental data for separated flows. Prescribed-displacement-thickness computations are made with both methods and compared to experiment for a series of separated flows, including low speed and transonic shock-induced separation. Effects of upstream history on the turbulent shear stress development are shown to be important for the accurate prediction of the separated flows considered and the experimental trends are reasonably modeled by a rate equation derived from the turbulent kinetic energy equation.

Thomas, J. L.↗

NASA NTRS1984

Theoretical analysis of aircraft afterbody flow

The strongly interactive flow field about aircraft afterbodies is investigated using computational techniques by which the thin-shear-layer formulation of the compressible, Reynolds-averaged Navier-Stokes equations is solved. A time-dependent implicit numerical algorithm is used to obtain solutions for a variety of afterbody and nozzle geometries, within the class of bodies of revolution, for both subsonic and supersonic external flow, and for sonic and supersonic underexpanded jets. Only centered nozzles with either a sharp lip or a blunt base are considered. In all cases, computed results are compared with experimental data taken at flight Reynolds numbers for like-flow conditions. Turbulence closure is realized using algebraic eddy-viscosity concepts. A new and unique adaptive-grid technique is used to resolve flow regimes with large gradients and to improve the accuracy and efficiency of the computational scheme. Special singular point boundary conditions are used for similar purposes, and are especially effective for highly under-expanded jets. For all cases considered, except one with a very large base-to-nozzle-exit-diameter ratio, the agreement with experimental measurements is excellent. For geometries with large base regions, enhancements in the turbulence transport model are necessary to support improvements in the flow-field simulation.

Deiwert, G. S.↗

NASA NTRS1984

Rotationally-induced Birkeland current systems

Rotational effects which are negligible in earth's magnetosphere become dominant in the magnetospheres of the outer planets where they give rise to Birkeland current circuits coupling the ionospheric and magnetospheric motions. The centrifugal force of corotation produces an azimuthal ring current in the magnetosphere while the Coriolis force produces a current parallel to the plasma flow. The acceleration current also becomes significant when deviations from strict corotation are appreciable. In general, none of these currents are divergence-free, and closure is provided by ionospheric conduction currents via connecting Birkeland currents. Thus the ionospheric conductivity regulates magnetospheric motions much as it does in the terrestrial case. The effects of such currents have been clearly observed in the magnetospheres of Jupiter and Saturn. Birkeland current circuits also transmit planetary angular momentum to external sinks such as conducting satellites (e.g., Io), plasma production sites (e.g., the Io torus), and/or the surrounding solar wind (as proposed for Uranus).

Hill, T. W.↗

NASA NTRS1984

A combined direct/inverse three-dimensional transonic wing design method for vector computers

A three-dimensional transonic-wing design algorithm for vector computers is developed, and the results of sample computations are presented graphically. The method incorporates the direct/inverse scheme of Carlson (1975), a Cartesian grid system with boundary conditions applied at a mean plane, and a potential-flow solver based on the conservative form of the full potential equation and using the ZEBRA II vectorizable solution algorithm of South et al. (1980). The accuracy and consistency of the method with regard to direct and inverse analysis and trailing-edge closure are verified in the test computations.

Weed, R. A.↗

NASA NTRS1984

Thermal-mechanical fatigue crack growth in Inconel X-750

Thermal-mechanical fatigue crack growth (TMFCG) was studied in a gamma-gamma' nickel base superalloy Inconel X-750 under controlled load amplitude in the temperature range from 300 to 650 C. In-phase (T sub max at sigma sub max), out-of-phase (T sub min at sigma sub max), and isothermal tests at 650 C were performed on single-edge notch bars under fully reversed cyclic conditions. A dc electrical potential method was used to measure crack length. The electrical potential response obtained for each cycle of a given wave form and R value yields information on crack closure and crack extension per cycle. The macroscopic crack growth rates are reported as a function of delta k and the relative magnitude of the TMFCG are discussed in the light of the potential drop information and of the fractographic observations.

Marchand, N.↗

NASA NTRS1983

Control and modeling of a CELSS (Controlled Ecological Life Support System)

Research topics that arise from the conceptualization of control for closed life support systems which are life support systems in which all or most of the mass is recycled are discussed. Modeling and control of uncertain and poorly defined systems, resource allocation in closed life support systems, and control structures or systems with delay and closure are emphasized.

Auslander, D. M.↗

NASA NTRS1984

Galaxy formation

Implications of the isotropy of the cosmic microwave background on large and small angular scales for galaxy formation are reviewed. In primeval adiabatic fluctuations, a universe dominated by cold, weakly interacting nonbaryonic matter, e.g., the massive photino is postulated. A possible signature of photino annihilation in our galactic halo involves production of cosmic ray antiprotons. If the density is near its closure value, it is necessary to invoke a biasing mechanism for suppressing galaxy formation throughout most of the universe in order to reconcile the dark matter density with the lower astronomical determinations of the mean cosmological density. A mechanism utilizing the onset of primordial massive star formation to strip gaseous protogalaxies is described. Only the densest, early collapsing systems form luminous galaxies.

Silk, J.↗

NASA NTRS1984

On the use of marker loads and replicas for measuring growth rates for small cracks

The initiation and growth of small cracks (5-500 microns m) from edge notches in 2024-T3 aluminum alloy sheets were studied under constant amplitude loading. Two methods were used to measure crack shape and size. In the first method, striation marker bands were periodically formed along the crack front by interrupting the constant amplitude loading by either an elevated R-ratio load sequence, or by an overload sequence. In the second method, the surface crack length was monitored by taking surface replicas at regular intervals. The marker band techniques did not provide reliable crack length and crack shape information for cracks smaller than 2 mm. The replica technique provided accurate information for surface crack length at all crack lengths, and fracture tests on specimens with small cracks provided crack-shape information. Crack growth rates were plotted against the stress intensity factor ranges. The results exhibited the small crack effect, in that the small cracks grew faster than large cracks at the same stress-intensity factor range. A crack closure model was also used to analyze the growth of small cracks from small (inclusion) defects at the notch surface.

Swain, M. H.↗

NASA NTRS1985

Parabolic dish test site: History and operating experience

The parabolic dish test site (PDTS) was established for testing point-focusing solar concentrator systems operating at temperatures approaching 1650 C. Among tests run were evaluation and performance characterization of parabolic dish concentrators, receivers, power conversion units, and solar/fossil-fuel hybrid systems. The PDTS was fully operational until its closure in June, 1984. The evolution of the test program, a chronological listing of the experiments run, and data summaries for most of the tests conducted are presented.

Selcuk, M. K.↗

NASA NTRS1985

An evaluation of oxygen-hydrogen propulsion systems for the Space Station

Conceptual designs for O2/H2 chemical and resistojet propulsion systems for the space station was developed and evaluated. The evolution of propulsion requirements was considered as the space station configuration and its utilization as a space transportation node change over the first decade of operation. The characteristics of candidate O2/H2 auxiliary propulsion systems are determined, and opportunities for integration with the OTV tank farm and the space station life support, power and thermal control subsystems are investigated. OTV tank farm boiloff can provide a major portion of the growth station impulse requirements and CO2 from the life support system can be a significant propellant resource, provided it is not denied by closure of that subsystem. Waste heat from the thermal control system is sufficient for many propellant conditioning requirements. It is concluded that the optimum level of subsystem integration must be based on higher level space station studies.

Klemetson, R. W.↗

NASA NTRS1985

Space shuttle revitalization system

The Space Shuttle air revitalization system is discussed. The sequential steps in loop closure are examined and a schematic outline of the regenerative air revitalization system is presented. Carbon dioxide reduction subsystem concepts are compared. Schemes are drawn for: static feedwater electrolysis cell, solid polymer electrolyte water electrolysis cell, air revitalization system, nitrogen generation reactions, nitrogen subsystem staging, vapor compression distillation subsystem, thermoelectric integrated membrane evaporation subsystem, catalytic distillation water reclamation subsystem, and space shuttle solid waste management system.

Quattrone, P. D.↗

NASA NTRS1985

Convoluted nozzle design for the RL10 derivative 2B engine

The convoluted nozzle is a conventional refractory metal nozzle extension that is formed with a portion of the nozzle convoluted to show the extendible nozzle within the length of the rocket engine. The convoluted nozzle (CN) was deployed by a system of four gas driven actuators. For spacecraft applications the optimum CN may be self-deployed by internal pressure retained, during deployment, by a jettisonable exit closure. The convoluted nozzle is included in a study of extendible nozzles for the RL10 Engine Derivative 2B for use in an early orbit transfer vehicle (OTV). Four extendible nozzle configurations for the RL10-2B engine were evaluated. Three configurations of the two position nozzle were studied including a hydrogen dump cooled metal nozzle and radiation cooled nozzles of refractory metal and carbon/carbon composite construction respectively.

Source record↗

NASA NTRS1985

An implicit finite-difference code for a two-equation turbulence model for three-dimensional flows

An implicit finite difference code was developed which solves the transport equations for the turbulence kinetic energy and its dissipation rate in generalized coordinates in three dimensions. The finite difference equations are solved using the Beam-Warming algorithm. The kinetic energy-dissipation code, KEM, provides the closure; i.e., the turbulent viscosity for calculation of either compressible or incompressible flows. Turbulent internal flow over a backward-facing step has been calculated using the present code in conjunction with the Incompressible Navier-Stokes Code, INS3D. The results are in good agreement with experiments and two dimensional computations of other researchers.

Kaul, U. K.↗

NASA NTRS1985

Design of a dual fault tolerant space shuttle payload deployment actuator

As the Shuttle Transportation System (STS) becomes operational, the number and variety of payloads will increase. The need to deploy these cargo elements will require a variety of unique actuator designs, all of which will have to conform with STS safety policy. For those missions where payload operations extend beyond the payload bay door envelope, this policy deems the prevention of door closure as a catastrophic hazard. As such, it must be controlled by independent, primary and backup methods. The combination of these methods must be two fault tolerant. The design of such an actuator is described. The device consists of a single linear ballscrew with two ballnuts, each bellnut forming an independent actuator using the common ballscrew. The design requirements, concept development, hardware configuration, and fault tolerance rationale are highlighted.

Teske, D. R.↗

NASA NTRS1983

Gravitational lens effects of a cosmological density of compact objects

Amplification of quasar light by a cosmological density of compact objects causes significant effects on many quasars in magnitude-limited samples. For lens masses solar mass less than 100,000 solar mass the continuum would be amplified by a magnitude or more but the line emission would not. Examination of the UV selected sample of Marshall et al. (1983) gives limits to more than 90 percent statistical confidence of Omega(c) less than 0.1 for a mass between 200 and 100,000 solar mass, where Omega(c) is the mean density of objects of mass M relative to the closure density. Preliminary results from an X-ray selected sample may probe to more than 0.1 solar mass and give a value for Omega(c) of less than one. These limits indicate that the remnants of an early population of massive stars cannot make a cosmologically significant contribution to the mass density of the universe. On a separate topic, recent work on the enhanced surface density of quasars near galaxies due to lensing by stars in the galaxy halos is reviewed.

Canizares, C. R.↗

NASA NTRS1984

Association between energetic particle bursts and Birkeland currents in the geomagnetic tail

IMP 8 observations in the geomagnetic tail of energetic particles at hundreds of keV and of the magnetic field are examined for a substorm period from 1700 to 1800 UT on Mar. 3, 1976. For this interval, it is found that bursts of energetic protons detected at a downstream distance of about 37 earth radii in the midnight tail region are accompanied by east-west magnetic field perturbations indicative of Birkeland current sheets. The magnitude of the magnetic field perturbations range from about 1 to 12 nT, corresponding to current densities of 1 to 9 mA/m when integrated over the current sheet thickness. These values are comparable to previous observations of Birkeland currents in the near-earth tail (X greater than -20 earth radii) and with the auroral-arc-associated Birkeland current densities at low altitudes scaled out to the tail region. The favorable comparison suggests that the closure of small-scale Birkeland current systems, at least in these instances, lies tailward of about 40 earth radii. The observed Birkeland current system and the magnitude of current densities are found to be consistent with ion tearing instability in the tail. The inferred wavelength of the tearing mode along the tail axis is about 2 to 17 earth radii. In the context of the tearing model, the presence of Birkeland currents and the occasional isotropic distribution of energetic electrons (of more than 0.22 MeV) suggest that the energetic particle events in this study occur on closed magnetic field lines, even though strong tailward streaming dominates the particle anisotropy in these events.

Lui, A. T. Y.↗