Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COMBUSTION PHYSICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Investigation of spontaneous combustion of hydrogen-oxygen mixture using DSMC simulation

Combustion has been widely studied in the literature, but very little work was focused on the microscopic level. In this paper, the DSMC method is applied to simulate the microscopic behavior of the spontaneous combustion of hydrogen oxygen mixture. It is found that the ignition delay time of the mixture depends on many factors, such as the physical size, temperature, pressure, and dilution. Comparison between DSMC and CFD results shows that more atomic hydrogen is consumed through reaction HO{sub 2}+H→H{sub 2}+O{sub 2} at temperature close to the extended second explosion limit due to localized distribution of reactants, which may indicate the importance of microscopic behavior on low temperature combustion.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Autoignition response of n -butanol and its blend with primary reference fuel constituents of gasoline.

We study the influence of blending n-butanol on the ignition delay times of n -heptane and iso-octane, the primary reference fuels for gasoline. The ignition delay times are measured using a rapid compression machine, with an emphasis on the low-to-intermediate temperature conditions. The experiments are conducted at equivalence ratios of 0.4 and 1.0, for a compressed pressure of 20 bar, with the temperatures at the end of compression ranging from 613 K to 979 K. The effect of n -butanol addition on the development of the two-stage ignition characteristics for the two primary reference fuels is also examined. The experimental results are compared to predictions obtained using a detailed chemical kinetic mechanism, which has been obtained by a systematic merger of previously reported base models for the combustion of the individual fuel constituents. In conclusion, a sensitivity analysis on the base, and the merged models, is also performed to understand the dependence of autoignition delay times on the model parameters.

30 DIRECT ENERGY CONVERSION↗

Influence of Organically Modified Nanoclay on Thermal and Combustion Properties of Bagasse Reinforced HDPE Nanocomposites

The nanocomposites of high density polyethylene (HDPE)/bagasse flour (BF) with different contents of the organomodified montmorillonite (OMMT) were produced by melt blending process. The thermal stability and combustion behavior of nanocomposites were characterized by thermogravimetric analysis (TGA), differential scanning calorimetry, and cone calorimeter tests. The results of TGA data of the nanocomposites indicated that the OMMT greatly enhanced the thermal stability, and char residues of the HDPE/BF blends gradually increased with increasing the OMMT content. The activation energy was determined to describe the energy consumption of the initiation of the thermal degradation process. The composites produced with the 6 phc OMMT had the highest activation energy values among the evaluated composites (106 kJ/mol), whereas composites without nanoclay exhibited the lowest one. Furthermore, as the OMMT was incorporated into the nanocomposites, the melting temperature (T{sub m}), crystallization temperature (T{sub c}) melting enthalpy (∆H{sub m}) and crystallinity (X{sub c}) of HDPE/BF blends increased. The findings showed that the OMMT effectively boosted the flame retardancy of nanocomposites due to the formation of the carbonaceous silicate char shields delayed time to ignition and the combustion process was remarkably hindered.

36 MATERIALS SCIENCE↗

Wide-angle light scattering (WALS) for soot aggregate characterization

A novel set-up for the experimental determination of aggregate morphology in combustion processes based on elastic light scattering has been designed and realized. A key feature of this wide-angle light scattering (WALS) approach is an ellipsoidal mirror which is used to collect scattered light over a wide angular range of about 10-170 . The set-up employs a cw solid-state laser as light source and an intensified CCD-camera as detector. By means of the mirror the scattered light is imaged onto the detector allowing for a simultaneous acquisition of a full scattering diagram with a high angular resolution of about 0.6 . To demonstrate the performance of the approach, measurements for various sooting flames produced by premixed combustion in a flat flame burner were carried out, where the burner was operated with different equivalence ratios and fuels. It is shown that radii of gyration of soot particles may efficiently be obtained from an analysis of the scattering diagrams. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interaction of Plasma Discharges with a Flame: Experimental and Numerical Study

This paper presents experimental results and numerical simulations of methane/air non-premixed flame under plasma assistance. Without plasma assistance, the flame blows off at a 28-30 m{center_dot}s{sup -1} bulk velocity (power around 3 kW). When the discharge is on, the flame can be maintained up to a bulk velocity of 53 m{center_dot}s{sup -1}(power around 6 kW), corresponding to +90% gain in power with only a few watt of plasma power. The plasma discharges present short duration current pulses (between 100 ns and 200 ns) and occur non-monotonically (delay between two pulses from 6x10{sup -5} s to 0.1 s). The probability density function of this occurrence is significantly influenced by the mass flow rate or the absence of flame, revealing the strong coupling of the plasma with hydrodynamic and combustion. For the numerical section of this work, we simulated the flame using a Computational Fluid Dynamics code based on Direct Numerical Simulation (direct solving of Navier-Stokes equations), and investigated the thermal and/or chemical effects of discharges on the flame stability.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Large eddy simulation and laser diagnostic studies on a low swirl stratified premixed flame

This paper presents numerical simulations and laser diagnostic experiments of a swirling lean premixed methane/air flame with an aim to compare different Large Eddy Simulations (LES) models for reactive flows. An atmospheric-pressure laboratory swirl burner has been developed wherein lean premixed methane/air is injected in an unconfined low-speed flow of air. The flame is stabilized above the burner rim in a moderate swirl flow, triggering weak vortex breakdown in the downstream direction. Both stereoscopic (3-component) PIV and 2-component PIV are used to investigate the flow. Filtered Rayleigh scattering is used to examine the temperature field in the leading flame front. Acetone-Planar Laser Induced Fluorescence (PLIF) is applied to examine the fuel distribution. The experimental data are used to assess two different LES models; one based on level-set G-equation and flamelet chemistry, and the other based on finite rate chemistry with reduced kinetics. The two LES models treat the chemistry differently, which results in different predictions of the flame dynamic behavior and statistics. Yet, great similarity of flame structures was predicted by both models. The LES and experimental data reveal several intrinsic features of the low swirl flame such as the W-shape at the leading front, the highly wrinkled fronts in the shear layers, and the existence of extinction holes in the trailing edge of the flame. The effect of combustion models, the numerical solvers and boundary conditions on the flame and flow predictions was systematically examined. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of changes of physical properties on CO2 capture solvents on its absorption rate

Concern over greenhouse gas emissions, such as CO2 from fossil fuel combustion, is leading to new regulations on fossil-fuel fired power generation facilities. Using amine-based solutions for CO2 capture in power plants is the most common method utilized industrially and studied in the laboratory environment. However, a limited number of amines are available for carbon capture research after balancing the capital cost and energy penalty. In the carbon capture process, physical properties such as viscosity, surface tension, wettability, etc. are found to play important roles in solvent performance. In this context, we are exploring an approach to enhance the CO2 capture of amine solvents by tuning the physical properties of the amine solvents by the addition of additives. These additives in the amine solution utilize controlled bubble generation to increase liquid-gas contact surface area. This method can increase mass transfer in the absorber column, specifically at the bottom where the mass transfer is limited. These additives can enhance the CO2 capture efficiency by changing the physical property of the solvent which in turn can lower the capital cost associated with the system. This work can be applied to all common aqueous amine solvent and would be of great interest to those in the CCS community.

20 FOSSIL-FUELED POWER PLANTS↗

Simulations of droplet combustion under gas turbine conditions

In various applications with recirculation, liquid droplets can be immersed in gases that may have a wide range of possible compositions, from pure air to hot combustion products. In order to gain fundamental understanding of the behaviour of individual droplets in vitiated air, numerical simulations of kerosene single droplet evaporation, autoignition, and combustion in conditions relevant to gas turbines have been performed. The droplet autoignition behaviour has been analysed in both physical and mixture fraction space for a wide range of vitiated air compositions and initial droplet diameters. Results show that the autoignition time delay decreases with increasing level of dilution with hot combustion products and decreasing initial droplet diameter. Chemistry is confined up to a radius of almost 10 initial droplet diameters and the location of autoignition is influenced by both the initial droplet diameter and the level of dilution. The time evolution of species in the gaseous phase after autoignition shows similar trends for all the diameters and dilution levels investigated here with the peak of temperature and OH mass fraction moving towards the droplet surface as a consequence of the balance between fuel production and consumption. In mixture fraction space, the location of the peaks of temperature and OH mass fraction after autoignition do not change in time whereas other intermediate species such as CH 2 O and pyrolysis products still exhibit a quite variable behaviour. The long-time flame structure has been compared with gaseous laminar counterflow simulations and, although qualitatively similar, the flame structure in the two configurations has differences with implications for flamelet combustion models used in spray combustion. The droplet evaporation, autoignition, and combustion behaviour has been summarized through a regime diagram showing the evaporation and autoignition time delays as a function of both initial droplet diameter and vitiated air dilution. This allows the identification of different states in the droplet combustion scenario and the introduction of critical values of dilution and initial droplet diameter beyond which single droplet rather than cloud combustion can occur, which can be exploited in the design of lean burn gas turbine combustion systems. In conclusion, the approach presented here can be easily extended to other conditions and fuels allowing the generation of regime diagrams for various operating conditions.

42 ENGINEERING↗

Understanding the Impact of Surface Reconstruction of Perovskite Catalysts on CH 4 Activation and Combustion

Methane conversion has received renewed interest due to the rapid growth in production of shale gas. Methane combustion for power generation and transportation is one of the alternatives for methane utilization. However, complete conversion of methane is critical to minimize negative environmental effects from unburned methane, whose noxious effect is 25 times greater than that of CO 2 . Although perovskite catalysts have high thermal stability, their low activities for methane combustion prevent them from being utilized on a commercial basis. In this work, we show the impact from reconstruction of surface and subsurface monolayers of perovskite catalysts on methane combustion, using SrTiO 3 (STO) as a model perovskite. Several STO samples obtained through different synthetic methods and subjected to different postsynthetic treatments were tested for methane combustion. Through top surface characterization, kinetic experiments (including isotope labeling experiments) and density functional theory calculations, it is shown that both surface segregation of Sr and creation of step surfaces of STO can impact the rate of methane combustion over an order of magnitude. Here, this work highlights the role of surface reconstruction in tuning perovskite catalysts for methane activation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of the synthesis method on the porosity, microstructure and electrical properties of La{sub 0.7}Sr{sub 0.3}MnO{sub 3} cathode materials

Lanthanum strontium manganite (La{sub 1-x}Sr{sub x}MnO{sub 3}, LSM) has been studied as a promising material for application as a cathode in solid oxide fuel cells. In the present work La{sub 0.7}Sr{sub 0.3}MnO{sub 3} nanopowders were synthesized by three different methods (combustion, citrate and solid-state) and characterized by thermal analysis, X-ray diffraction, physical adsorption of N{sub 2} and scanning electron microscopy. All powders exhibited single LSM phase formation with crystallite sizes in the range of 12-20 nm. Nanopowders were sintered at 1100 deg. C to produce porous pellets. The porosity, particle size and microstructure of LSM sintered bodies are strongly dependent on the preparation methodology. The samples synthesized by combustion and citrate methods presented smaller particle sizes and higher porosity after sintering than that derived from solid-state synthesis. However, the electrical conductivity, measured by two-probe technique, was very similar for all three samples.

36 MATERIALS SCIENCE↗

Experimental Determination of Combustion Characteristics for Commercial Biodiesel and 0# Diesel

In this project, we have experimentally studied the combustion characteristics of commercial refined biodiesel and 0# diesel. Combustion of these two types of flammable liquids was carried out in a calorimeter to measure their heat release rate. The results showed that the heat release rate, which is one of the most significant properties in studying combustion, varies significantly depending on the samples and the dimensions of the circular burner. With the aim of evaluating the combustion characteristics, we also determined and analyzed other key properties of the fuels such as flash point, total heat release, and mass loss rate, which reflect the fire hazard. The results provide an experimental basis for developing fire protection measures during use, storage, and distribution of biodiesel. The flash point of biodiesel is higher than for 0# diesel, while the heat release rate, the experimental total heat release, the average combustion temperature and the radiation of biodiesel are lower than for 0# diesel.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Autoignition of n-decane at high pressure

The ignition of n-decane in air has been studied experimentally at temperatures between 800 and 1300 K and at pressures up to 80 atm. The experiments have been carried out in a preheated shock tube. Ignition delay times of stoichiometric and lean mixtures of n-decane and air have been measured behind reflected shock waves. The experimental data have been compared with four kinetic mechanisms. Differences between the experimental data and the modeling results are discussed. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Detonation cellular structure in NO{sub 2}/N{sub 2}O{sub 4}-fuel gaseous mixtures

Experimental and numerical studies of the detonation in NO{sub 2}-N{sub 2}O{sub 4}/fuel (H{sub 2}, CH{sub 4}, and C{sub 2}H{sub 6}) gaseous mixtures show that for equivalence ratio {phi}>0.8-1, (1) the detonation has a double cellular structure, the ratio between the cell size of each net being at least one order of magnitude; (2) inside the detonation reaction zone the chemical energy is released in two successive exothermic steps. Their chemical induction lengths, defined between the leading shock front and each local maximum heat release rate associated with each step, differ by at least one order of magnitude. The chemical reaction NO{sub 2} + H {yields} NO + OH is mainly responsible for the first exothermic step (fast kinetics), NO being the oxidizer on the second one (slow kinetics). Existence of correlations between calculated induction lengths and corresponding cell sizes strengthen the assumption that the cellular structure originates from local strong gradients of chemical heat release inside the detonation reaction zone. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Aerodynamic characteristics and thermal structure of nonpremixed reacting swirling wakes at low Reynolds numbers

The aerodynamic characteristics and thermal structure of uncontrolled and controlled swirling double-concentric jet flames at low Reynolds numbers are experimentally studied. The swirl and Reynolds numbers are lower than 0.6 and 2000, respectively. The flow characteristics are diagnosed by the laser-light-sheet-assisted Mie scattering flow visualization method and particle image velocimetry (PIV). The thermal structure is measured by a fine-wire thermocouple. The flame shapes, combined images of flame and flow, velocity vector maps, streamline patterns, velocity and turbulence distributions, flame lengths, and temperature distributions are discussed. The flow patterns of the no-control case exhibit an open-top, single-ring vortex sitting on the blockage disc with a jetlike swirling flow evolving from the central disc face toward the downstream area. The rotation direction and size of the near-disc vortex, as well as the flow properties, change in different ranges of annulus swirl number and therefore induce three characteristic flame modes: weak swirling flame, lifted flame, and turbulent reattached flame. Because the near-disc vortex is open-top, the radial dispersion of the fuel-jet fluids is not significantly enhanced by the annulus swirling flow. The flows of the reacting swirling double-concentric jets at such low swirl and Reynolds numbers therefore present characteristics of diffusion jet flames. In the controlled case, the axial momentum of the central fuel jet is deflected radially by a control disc placed above the blockage disc. This arrangement can induce a large near-disc recirculation bubble and high turbulence intensities. The enhanced mixing hence tremendously shortens the flame length and enlarges the flame width. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Transition from cool flame to thermal flame in compression ignition process

The mechanism that initiates thermal flames in compression ignition has been studied. Experimentally, a homogeneous charge compression ignition (HCCI) engine was used with DME, n-heptane, and n-decane. Arrhenius plots of the heat release rate in the HCCI experiments showed that rates of heat release with DME, n-heptane, and n-decane exhibited a certain activation energy that is identical to that of the H{sub 2}O{sub 2} decomposition reaction. The same feature was observed in diesel engine operation using ordinary diesel fuel with advanced ignition timing to make ignition occur after the end of fuel injection. These experimental results were reproduced in nondimensional simulations using kinetic mechanisms for DME, n-heptane, and n-decane, the last being developed by extending the n-heptane mechanism. Methanol addition, which suppresses low-temperature oxidation (LTO) and delays the ignition timing, had no effect on the activation energy obtained from the Arrhenius plot of heat release rate. Nevertheless, methanol addition lowered the heat release rates during the prethermal flame process. This is because H{sub 2}O{sub 2} formation during cool flame was reduced by adding methanol. The mechanism during the transition process from cool flame to thermal flame can be explained quantitatively using thermal explosion theory, in which the rate-determining reaction is H{sub 2}O{sub 2} decomposition, assuming that heat release in this period is caused by partial oxidation of DME and HCHO initiated with the reaction with OH produced though H{sub 2}O{sub 2} decomposition. (author)

33 ADVANCED PROPULSION SYSTEMS↗

Mechanisms of deflagration-to-detonation transition under initiation by high-voltage nanosecond discharges

An experimental study of detonation initiation in a stoichiometric propane-oxygen mixture by a high-voltage nanosecond gas discharge was performed in a detonation tube with a single-cell discharge chamber. The discharge study performed in this geometry showed that three modes of discharge development were realized under the experimental conditions: a spark mode with high-temperature channel formation, a streamer mode with nonuniform gas excitation, and a transient mode. Under spark and transient initiation, simultaneous ignition inside the discharge channel occurred, forming a shock wave and leading to a conventional deflagration-to-detonation transition (DDT) via an adiabatic explosion. The DDT length and time at 1 bar of initial pressure in the square smooth tube with a 20-mm transverse size amounted to 50 mm and 50{mu}s, respectively. The streamer mode of discharge development at an initial pressure of 1 bar resulted in nonuniform mixture excitation and a successful DDT via a gradient mechanism, which was confirmed by high-speed time resolved ICCD imaging. The gradient mechanism implied a longer DDT time of 150{mu}s, a DDT run-up distance of 50 mm, and an initiation energy of 1 J, which is two orders of magnitude less than the direct initiation energy for a planar detonation under these conditions. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental study of Markstein number effects on laminar flamelet velocity in turbulent premixed flames

Effects of turbulent flame stretch on mean local laminar burning velocity of flamelets, u{sub n}, were investigated experimentally in an explosion vessel at normal temperature and pressure. In this context, the wrinkling, A{sub t}/A{sub l}, and the burning velocity, u{sub t}, of turbulent flames were measured simultaneously. With the flamelet assumption the mean local laminar burning velocity of flamelets, u{sub n}=u{sub t} x (A{sub t}/A{sub l}){sup -1}, was calculated for different turbulence intensities. The results were compared to the influence of stretch on spherically expanding laminar flames. For spherically expanding laminar flames the stretched laminar burning velocity, u{sub n}, varied linearly with the Karlovitz stretch factor, yielding Markstein numbers that depend on the mixture composition. Six different mixtures with positive and negative Markstein numbers were investigated. The measurements of the mean local laminar burning velocity of turbulent flamelets were used to derive an efficiency parameter, I, which reflects the impact of the Markstein number and turbulent flame stretch - expressed by the turbulent Karlovitz stretch factor - on the local laminar burning velocity of flamelets. The results showed that the efficiency is reduced with increasing turbulence intensity and the reduction can be correlated to unsteady effects. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Visualization of the unburned gas flow field ahead of an accelerating flame in an obstructed square channel

The effect of blockage ratio on the early phase of the flame acceleration process was investigated in an obstructed square cross-section channel. Flame acceleration was promoted by an array of top-and bottom-surface mounted obstacles that were distributed along the entire channel length at an equal spacing corresponding to one channel height. It was determined that flame acceleration is more pronounced for higher blockage obstacles during the initial stage of flame acceleration up to a flame velocity below the speed of sound of the reactants. The progression of the flame shape and flame area was determined by constructing a series of three-dimensional flame surface models using synchronized orthogonal schlieren images. A novel schlieren based photographic technique was used to visualize the unburned gas flow field ahead of the flame front. A small amount of helium gas is injected into the channel before ignition, and the evolution of the helium diluted unburned gas pocket is tracked simultaneously with the flame front. Using this technique the formation of a vortex downstream of each obstacle was observed. The size of the vortex increases with time until it reaches the channel wall and completely spans the distance between adjacent obstacles. A shear layer develops separating the core flow from the recirculation zone between the obstacles. The evolution of oscillations in centerline flame velocity is discussed in the context of the development of these flow structures in the unburned gas. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗