Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CHROMATICITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

One-step hydrothermal synthesis, characterization and magnetic properties of orthorhombic PrCrO{sub 3} cubic particles

Highlights: • Orthorhombic PrCrO{sub 3} cubic particles were prepared by a simple and facile one-step hydrothermal method. • The possible formation mechanism of PrCrO{sub 3} cubic particles was proposed. • The as-synthesized PrCrO{sub 3} exhibited behaviors of magnetic transition and negative magnetization. - Abstract: Orthorhombic PrCrO{sub 3} cubic particles were synthesized by a simple and facile one-step hydrothermal method of processing temperature 280 °C for 7 days. The products prepared in this paper have been characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR) and field-emission scanning electron microscopy (FESEM). The magnetic properties of the final sample are also studied. The XRD pattern shows the pure orthorhombic phase for PrCrO{sub 3} particles, the XPS and FTIR results further demonstrate the purity and composition of the product. FESEM images show cubic morphology for the PrCrO{sub 3} particles. The possible growth mechanism for PrCrO{sub 3} cubic particles is proposed. Through the investigation of magnetic properties, it can be seen that the orthorhombic PrCrO{sub 3} cubic particles exhibit behaviors of magnetic transition and negative magnetization. The Néel temperature is about 232 K and the magnetic hysteresis loop under 4 K shows that the coercivity (H{sub C}) and remanence (M{sub r}) is about 1728 Oe and 4.88 emu/g, respectively.

36 MATERIALS SCIENCE↗

Enhanced photodegradation activity of methyl orange over Ag{sub 2}CrO{sub 4}/SnS{sub 2} composites under visible light irradiation

Highlights: • Novel visible-light-driven Ag{sub 2}CrO{sub 4}/SnS{sub 2} composites are synthesized. • Ag{sub 2}CrO{sub 4}/SnS{sub 2} exhibits higher photocatalytic activity than pure Ag{sub 2}CrO{sub 4} and SnS{sub 2}. • Ag{sub 2}CrO{sub 4}/SnS{sub 2} exhibits excellent stability for the photodegradation of MO. • The possible photocatalytic mechanism was discussed in detail. - Abstract: Novel Ag{sub 2}CrO{sub 4}/SnS{sub 2} composites were prepared by a simple chemical precipitation method and characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, UV–vis diffuse reflectance spectroscopy and photoluminescence spectroscopy. The visible light photocatalytic tests showed that the Ag{sub 2}CrO{sub 4}/SnS{sub 2} composites enhanced photocatalytic activities for the photodegradation of methyl orange (MO) under visible light irradiation (λ > 420 nm), and the optimum rate constant of Ag{sub 2}CrO{sub 4}/SnS{sub 2} at a weight content of 1.0% Ag{sub 2}CrO{sub 4} for the degradation of MO was 2.2 and 1.5 times larger than that of pure Ag{sub 2}CrO{sub 4} and SnS{sub 2}, respectively. The improved activity could be attributed to high separation efficiency of photogenerated electrons-hole pairs on the interface of Ag{sub 2}CrO{sub 4} and SnS{sub 2}, which arised from the synergistic effect between Ag{sub 2}CrO{sub 4} and SnS{sub 2}. Moreover, the possible photocatalytic mechanism with superoxide radical anions and holes species as the main reactive species in photocatalysis process was proposed on the basis of experimental results.

36 MATERIALS SCIENCE↗

Enhanced photocatalytic degradation of methylene blue dye under UV-sunlight irradiation by cesium doped chromium oxide thin films

Highlights: • Cs doped thin films has been prepared by the low- cost spray pyrolysis technique. • Enhanced photocatalytic activity of Cr2O3 thin films for MB photogegradation(MB) dye was achieved through Cs doping. • 6 % Cs doped Cr{sub 2}O{sub 3} thin film photocatalyst with the merits of low band gap and more oxygen vacancies, exhibits the highest sun-light photocatalytic activity. • High photostability and recyclability was achieved under sun-light irradiation. - Abstract: The present contribution highlights the photocatalytic degradation of methylene blue dye over chromium oxide Cr{sub 2}O{sub 3} thin films based photocatalysts illuminated by ultraviolet and sunlight. Cr{sub 2}O{sub 3} photocatalyst was synthesized as thin film by the spray pyrolysis method on glass substrate at temperature of 350 °C. The physical properties of the thin films were studied by X-ray diffraction, scanning electron microscopy (SEM), infrared spectroscopy (IR), Raman spectroscopy, photoluminescence (PL) probing and UV–vis spectroscopy. XRD results showed that all samples were well crystallized with rhomoboedric curudum structure. Emissions of all films have been observed in visible region at 325 nm excitation. UV–vis-NIR spectrophotometry analysis showed that the band gap energy value of chromium oxide is shortened with cesium doping. Results indicate that both the cesium doping and the introduction of oxygen vacancies promote good photocatalytic activity of Cs doped Cr{sub 2}O{sub 3} thin films under sunlight for MB degradation.

36 MATERIALS SCIENCE↗

A preliminary evaluation of immune stimulation following exposure to metal particles and ions using the mouse popliteal lymph node assay

The objective of this preliminary study was to evaluate the threshold for immune stimulation in mice following local exposure to metal particles and ions representative of normal-functioning cobalt-chromium (CoCr) metal-on-metal (MoM) hip implants. The popliteal lymph node assay (PLNA) was used in this study to assess immune responses in BALB/c mice following treatment with chromium-oxide (Cr{sub 2}O{sub 3}) particles, metal salts (CoCl{sub 2}, CrCl{sub 3} and NiCl{sub 2}), or Cr{sub 2}O{sub 3} particles together with metal salts using single-dose exposures representing approximately 10 days (0.000114 mg), 19 years (0.0800 mg), and 40 years (0.171 mg) of normal implant wear. The immune response elicited following treatment with Cr{sub 2}O{sub 3} particles together with metal salts was also assessed at four additional doses equivalent to approximately 1.5 months (0.0005 mg), 0.6 years (0.0025 mg), 2.3 years (0.01 mg), and 9.3 years (0.04 mg) of normal implant wear. Mice were injected subcutaneously (50 μL) into the right hind foot with the test article, or with the relevant vehicle control. The proliferative response of the draining lymph node cells (LNC) was measured four days after treatment, and stimulation indices (SI) were derived relative to vehicle controls. The PLNA was negative (SI < 3) for all Cr{sub 2}O{sub 3} particle doses, and was also negative at the lowest dose of the metal salt mixture, and the lowest four doses of the Cr{sub 2}O{sub 3} particles with metal salt mixture. The PLNA was positive (SI > 3) at the highest two doses of the metal salt mixture and the highest three doses of the Cr{sub 2}O{sub 3} particles with the metal salt mixture. The provisional NOAEL and LOAEL values identified in this study for immune activation corresponds to Co and Cr concentrations in the synovial fluid approximately 500 and 2000 times higher than that reported for normal-functioning MoM hip implants, respectively. Overall, these results indicate that normal wear conditions are unlikely to result in immune stimulation in individuals not previously sensitized to metals. - Highlights: • Immune responses in mice were assessed following treatment with Cr2O3 particles with metal salts. • The PLNA was negative (SI < 3) for all Cr2O3 particle doses. • A LOAEL for immune activation was identified at 0.04 mg of metal particles with metal salts. • A NOAEL for immune activation was identified at 0.01 mg of metal particles with metal salts.

60 APPLIED LIFE SCIENCES↗

Visualization of Hierarchical Nanodomains in Polymer/Fullerene Bulk Heterojunction Solar Cells

Here, traditional electron microscopy techniques such as bright-field imaging provide poor contrast for organic films and identification of structures in amorphous material can be problematic, particularly in high-performance organic solar cells. By combining energy-filtered corrected transmission electron microscopy, together with electron energy loss and X-ray energy-dispersive hyperspectral imaging, we have imaged PTB7/ PC 61 BM blended polymer optical photovoltaic films, and were able to identify domains ranging in size from several hundred nanometers to several nanometers in extent. This work verifies that microstructural domains exist in bulk heterojunctions in PTB7/PC 61 BM polymeric solar cells at multiple length scales and expands our understanding of optimal device performance providing insight for the design of even higher performance cells.

14 SOLAR ENERGY↗

Interaction Studies Between Crofer-22APU Alloy And P{sub 2}O{sub 5} Containing Barium Calcium Alumino-borosilicate (BCABS) Sealant Glass-Ceramics

We present the effect of P{sub 2}O{sub 5} addition on barium calcium aluminum borosilicate BCABS glasses of composition (mol %)35BaO-15CaO-5Al{sub 2}O{sub 3}-(37-x)SiO{sub 2}-8B{sub 2}O{sub 3}-xP{sub 2}O{sub 5}(0{<=}x{<=}5). The incorporation of P{sub 2}O{sub 5} increased network polymerization and crystallization tendency. However, addition of P{sub 2}O{sub 5} leads to the formation of Cr{sub 2}O{sub 3} at the interface, saturating it in the ions of the metal. This improves glass-to-metal bonding.

36 MATERIALS SCIENCE↗

Electronic structure of CuCrO{sub 2} thin films grown on Al{sub 2}O{sub 3}(001) by oxygen plasma assisted molecular beam epitaxy

Thin films of CuCrO{sub 2} have been grown on Al{sub 2}O{sub 3}(001) substrates by oxygen plasma assisted molecular beam epitaxy. With a substrate temperature of 700 Degree-Sign C or 750 Degree-Sign C, the films showed an unanticipated (015) orientation but at a higher substrate temperature of 800 Degree-Sign C the expected basal (001) orientation predominates. The optical absorption spectrum of CuCrO{sub 2} shows a direct allowed absorption onset at 3.18 eV together with a weak peak at 2.0 eV which is suppressed by Sn doping. This suggests that the low energy peak should be attributed to 3d{yields}3d excitations associated with Cu{sup 2+} defect states rather than excitations localised on Cr{sup 3+}. Valence band X-ray photoemission spectra of (001) and (015) oriented CuCrO{sub 2} are compared with those obtained from polycrystalline samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and transport properties of NdCrO{sub 3} nanoceramics

Reitveld refinement of the room temperature powder X-ray diffraction profile of NdCrO{sub 3} (NCO) nanoceramics synthesized by sol-gel processing shows orthorhombic Pnma (D{sub 2h}{sup 16}) space group symmetry. The refined lattice parameters are a = 5.482(3) A, b = 7.689(4) A and c = 5.416(3) A. Transmission electron microscopy (TEM) of NCO shows that the average particle size is around 70 nm. The electrical transport property of NCO is investigated by both conductivity and electric modulus formalism. The electrical data is taken by a LCR meter in a temperature range from 303 K to 573 K and in a frequency range from 42 Hz to 1.1 MHz. The ac conductivity follows a power law. The Cole-Cole plot of impedance at 303 K shows grain effect.

36 MATERIALS SCIENCE↗

Optical emission from a small scale model electric arc furnace in 250-600 nm region

Optical emission spectroscopy has been for long proposed for monitoring and studying industrial steel making processes. Whereas the radiative decay of thermal excitations is always taking place in high temperatures needed in steel production, one of the most promising environment for such studies are electric arc furnaces, creating plasma in excited electronic states that relax with intense characteristic emission in the optical regime. Unfortunately, large industrial scale electric arc furnaces also present a challenging environment for optical emission studies and application of the method is not straightforward. To study the usability of optical emission spectroscopy in real electric arc furnaces, we have developed a laboratory scale DC electric arc furnace presented in this paper. With the setup, optical emission spectra of Fe, Cr, Cr{sub 2}O{sub 3}, Ni, SiO{sub 2}, Al{sub 2}O{sub 3}, CaO, and MgO were recorded in the wavelength range 250-600 nm and the results were analyzed with the help of reference data. The work demonstrates that using characteristic optical emission, obtaining in situ chemical information from oscillating plasma of electric arc furnaces is indeed possible. In spite of complications, the method could possibly be applied to industrial scale steel making process in order to improve its efficiency.

36 MATERIALS SCIENCE↗

Reentrant spin-glass state in a geometrical frustrated multiferroic system: Role of disorder

We investigated the effect of magnetic (Mn) and nonmagnetic (Ga) doping at the Cr site of the layered geometrically frustrated antiferromagnetic compound LiCrO{sub 2}. 10% Ga doping at the Cr site does not invoke any metastability typical of a glassy magnetic state. However, similar amount of Mn doping drives the system to a spin glass (SG) state which is particularly evident from the magnetic memory and heat capacity studies. The onset of glassy state in 10% Mn doped sample is of reentrant type developing out of higher temperature antiferromagnetic state. The SG state in the Mn-doped sample shows a true reentry with the complete disappearance of the antiferromagnetic phase below the SG transition. The lack of SG state on Ga doping indicates the importance of random ferromagnetic/antiferromagnetic bonds for the glassy ground state in LiCrO{sub 2}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Oxidation behaviour of ferritic stainless steel grade Crofer 22 APU at 700 °C in flowing Ar−75%CO{sub 2}−12%H{sub 2}O

The oxidation of Ferritic Stainless Steel (FSS) grade Crofer 22 APU has been investigated. FSS alloys were exposed to isothermal conditions in a horizontal tube furnace at a 700 °C in flowing Ar−75%CO{sub 2}−12%H{sub 2}O at a pressure of approximately 1 atm. The results showed that the growth of non protective Fe{sub 2}O{sub 3} and spinel was observed after 50 h exposure in the presence of 12% H{sub 2}O. The weight was increased significantly with time of exposure. The formation of different oxides is presented on the interface of the specimen such as MnCr{sub 2}O{sub 4}, Fe{sub 3}O{sub 4} and Fe{sub 2}O{sub 3} were revealed by X-ray diffraction and supported by EDAX analysis. FSS did not form a protective Cr{sub 2}O{sub 3} layer due to water vapour accelerates the kinetics oxidation. Data of microstructure observation is presented and discussed in this paper in term of water vapour effects.

36 MATERIALS SCIENCE↗

3d-4f spin interaction and field-induced metamagnetism in RCrO{sub 4} (R = Ho, Gd, Lu) compounds

We observe that the zircon-type RCrO{sub 4} (R = Ho, Gd, Lu) compounds exhibit complicated magnetic properties and large magnetic entropy change due to the strong competition between ferromagnetic and antiferromagnetic interactions. For a field change of 7 T, the maximum values of entropy change and refrigerant capacity reach 28 J kg{sup −1} K{sup −1} and 740 J kg{sup −1}, respectively, for GdCrO{sub 4} whereas the corresponding values for HoCrO{sub 4} are 29 J kg{sup −1} K{sup −1} and 550 J kg{sup −1}. For GdCrO{sub 4} compound, the magnetic entropy change is quite large even at low temperatures well below the ferromagnetic transition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multiferroicity and magnetoelectric coupling enhanced large magnetocaloric effect in DyFe{sub 0.5}Cr{sub 0.5}O{sub 3}

DyFe{sub 0.5}Cr{sub 0.5}O{sub 3} has been synthesized using a sol-gel method. It exhibits ferroelectricity at the antiferromagnetic ordering temperature T{sub N1}∼261 K. Large magnetocaloric effect (MCE) (11.3 J/kg K at 4.5 T) enhanced by magnetoelectric coupling due to magnetic field and temperature induced magnetic transition was observed. Temperature-dependent Raman study shows an anomalous behavior near T{sub N1} in the phonon modes related to the vibration of Dy atoms and stretching of CrO{sub 6}/FeO{sub 6} octahedra, suggesting the ferroelectricity in DyFe{sub 0.5}Cr{sub 0.5}O{sub 3} is associated with the spin-phonon coupling with respect to both Dy and Cr/Fe ions. These results suggest routes to obtain high-temperature multiferroicity and large MCE for practical applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and optical characterization of Cr{sub 2}O{sub 3} nanostructures: Evaluation of its dielectric properties

The structural, optical and dielectric properties of as-grown Cr{sub 2}O{sub 3} nanostructures are demonstrated in this paper. Powder X-ray diffractometry analysis confirmed the rhombohedral structure of the material with lattice parameter, a = b = 4.953 Å; c = 13.578 Å, and average crystallize size (62.40 ± 21.3) nm. FE-SEM image illustrated the mixture of different shapes (disk, particle and rod) of as-grown nanostructures whereas; EDS spectrum confirmed the elemental purity of the material. FTIR spectroscopy, revealed the characteristic peaks of Cr–O bond stretching vibrations. Energy band gap (3.2 eV) of the nanostructures has been determined using the results of UV-VIS-NIR spectrophotometer. The dielectric properties of the material were checked in the wide frequency region (100Hz-30 MHz). In the low frequency region, the matrix of the dielectric behaves like source as well as sink of electrical energy within the relaxation time. Low value of dielectric loss exhibits that the materials posses good optical quality with lesser defects. The ac conductivity of the material in the high frequency region was found according to frequency power law. The physical-mechanism and the theoretical-interpretation of dielectric-properties of Cr{sub 2}O{sub 3} nanostructures attest the potential candidature of the material as an efficient dielectric medium.

36 MATERIALS SCIENCE↗

High temperature oxidation behavior of austenitic stainless steel AISI 304 in steam of nanofluids contain nanoparticle ZrO2

The objective of this study is to evaluate high temperature oxidation behavior of austenitic stainless steel SS 304 in steam of nanofluids contain nanoparticle ZrO{sub 2}. The oxidation was performed at high temperatures ranging from 600 to 800°C. The oxidation time was 60 minutes. After oxidation the surface of the samples was analyzed by different methods including, optical microscope, scanning electron microscope (SEM) and X-ray diffraction (XRD). X-ray diffraction examination show that the oxide scale formed during oxidation of stainless steel AISI 304 alloys is dominated by iron oxide, Fe{sub 2}O{sub 3}. Minor element such as Cr{sub 2}O{sub 3} is also appeared in the diffraction pattern. Characterization by optical microscope showed that cross section microstructure of stainless steel changed after oxidized with the oxide scale on the surface stainless steels. SEM and x-ray diffraction examination show that the oxide of ZrO{sub 2} appeared on the surface of stainless steel. Kinetic rate of oxidation of austenite stainless steel AISI 304 showed that increasing oxidation temperature and time will increase oxidation rate.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Hydrothermal synthesis and magnetic properties of ErCrO{sub 4} nanoparticles

Homogeneous single phase ErCrO{sub 4} nanoparticles have been synthesized by a modified sol-gel followed by hydrothermal method. X-ray diffraction reveals that the compound crystallizes into tetragonal structure with space group I41/amd. The average crystallite size was estimated to be 21(1) nm. Morphological analysis of the sample confirms uniform particles of size 20 nm. DC magnetic measurements show that ErCrO{sub 4} undergoes a paramagnetic-antiferromagnetic transition at 16 K, due to the superexchange Er-O-Cr-O-Er antiferromagnetic interactions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗