Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BASIC INTERACTIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Electroproduction of {rho}{sup 0} mesons on protons in quasielastic kinematics at intermediate energies and spin-flip mechanism of direct meson knockout

It is shown that the amplitude for the direct knockout of {rho}{sup 0} mesons plays an important role at energies W above the resonance region, W {>=} 2 GeV, and rather high values of Q{sup 2} {>=} 1.5-2 GeV{sup 2}/c{sup 2} and that it corresponds to the t pole in the channel of the virtual decay p {sup {yields}}p + {pi}{sup 0} accompanied by quark-spin flip upon momentum transfer to the meson, {pi}{sup 0} + {gamma}*{sub T} {sup {yields} {rho}0}. The contributions of several scalar mesons (p {sup {yields}}p + f{sub 0} channel), the contribution of the tensor meson f{sub 2}, and effects of the interference between different contributions were taken into account in addition to the contribution of the {pi}{sup 0} meson. The vectorand tensor-meson-dominance models were used to estimate the respective vertex constants. Within the proposed mechanism, the differential cross sections d{sigma}{sub L}/dt and d{sigma}{sub T}/dt were calculated for several W and Q{sup 2} values at which the respective total cross sections were measured by the CLAS Collaboration. Agreement with data on the transverse part of the total cross section, {sigma}{sub T}, was attained, whereby the assumption of a dominant role of magnetic spin transitions in the meson skin of the nucleon under conditions of quasielastic-knockout kinematics is confirmed. At the same time, the contribution of spin-flip transitions is suppressed in the longitudinal part of the cross section, {sigma}{sub L}, and this is confirmed by the results of our calculations. The behavior of the differential cross section d{sigma}{sub T}/dt is predicted with an eye to future experiments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Asymmetries in rare radiative leptonic and semileptonic decays of B mesons

The time-dependent and time-independent CP asymmetries A({sub CP})/{sup B}{sub q}{sup 0{yields}f} ({tau}) and A({sub CP})/{sup B}{sub q}{sup 0{yields}f}) (s-circumflex) for rare semileptonic and radiative leptonic decays of B mesons are calculated by the method of helicity amplitudes. The sensitivity of CP asymmetries to various extensions of the Standard Model that have an operator basis that is identical to the operator basis of the Standard Model is investigated. It is shown that, by combining information about the form of the charge lepton asymmetry A{sub FB} at small values of the square of the invariant dilepton mass and information about the average value of the time-dependent CP asymmetry, one can in principle determine the relative phases of the Wilson coefficients C7{sub {gamma}}, C-{sub 9}V, and C10A in the effective Hamiltonian for b {sup {yields} {l_brace}}d, s{r_brace}l{sup +}l{sup -} transitions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Hadronic radiative corrections to asymmetries observable in the G0 and Q{sub Weak} experiments

One-loop hadronic radiative corrections to asymmetries in electron-proton scattering were calculated for the G0 and Q{sub Weak} experiments in the range Q{sup 2} = 0.01-1.0 GeV{sup 2}. The formalism of the monopole approximation and the formalism of the dipole approximation were employed for the form factors in hadronic vertices, and no significant distinctions between the asymmetries calculated on the basis of these two approaches were revealed. The result obtained here is in good agreement with the results of previous calculations, but it does not comply very well with data from the G0 experiment. In all probability, this disagreement stems primarily from incompletely taking into account the contribution of strange quarks in the proton. Our theoretical prediction for the asymmetry in question is commensurate with the preliminary estimate of the Q{sub Weak} Collaboration.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Quantum theory of stimulated Cherenkov emission and stimulated compton scattering of electromagnetic waves by a low-density relativistic electron beam

A quantum theory of instabilities of a relativistic electron beam due to the stimulated Cherenkov effect in a dielectric and the stimulated Compton effect in vacuum is presented. The instability growth rates are found in a linear approximation and are shown to go over to the familiar growth rates in the classical approximation. A nonlinear theory of instabilities in the quantum case is developed. Analytic solutions are obtained that describe the nonlinear saturation of the amplitudes of the electromagnetic waves emitted by the beam.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Implementation and Validation of Photon Transport in OpenMC

OpenMC is a Monte Carlo particle transport code focused on reactor physics calculations. It stochastically simulates neutrons moving through 3D models using constructive solid geometry and continuous-energy cross sections. Recently, a photon transport capability was added to OpenMC. In reactor simulations, photon transport is needed, for example, to account for photon heating: although the majority of the energy deposited at a fission site comes from the kinetic energy of the fission fragments, a nontrivial portion can be carried away by photons. Therefore, photons produced in neutron reactions must be simulated in order to accurately model energy deposition. OpenMC can now simulate neutron-induced photon production as well as perform pure photon calculations. The four basic photon interactions with matter — coherent (Rayleigh) scattering, incoherent (Compton) scattering, the photoelectric effect, and pair production — are modeled. Secondary processes that can create new photons (i.e., atomic relaxation, electron-positron annihilation, and bremsstrahlung) are also included. The methods implemented here were validated against MCNP6 for a variety of materials and energies.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Polymer Filler Aging and Failure Studied by Lateral Force Microscopy

In the present work, we study, via force microscopy, the basic physical interactions of a single bead of silica filler with a PDMS matrix both before and after exposure to gamma radiation. Our goal was to confirm our results from last year, and to explore force microscopy as a means of obtaining particle-scale polymer/filler interactions suitable for use as empirical inputs to a computational model consisting of an ensemble of silica beads embedded in a PDMS matrix. Through careful calibration of a conventional atomic force microscope, we obtained both normal and lateral force data that was fitted to yield adhesion, surface shear modulus, and friction of a 1 {micro}m silica bead in contact with PDMS layers of various thickness. Comparison of these terms before and after gamma exposure indicated that initially, radiation exposure lead to softening of the PDMS, but eventually resulted in stiffening. Simultaneously, adhesion between the polymer and silica decreased. This could indicate a serious failure path for filled PDMS exposed to radiation, whereby stiffening of the bulk polymer leads to loss of compressive elastic behavior, while a decrease in polymer filler adhesion results in an increased likelihood of stress failure under load. In addition to further testing of radiation damaged polymers, we also performed FEA modeling of silica beads in a silicone matrix using the shear modulus and adhesion values isolated from the force microscopy experiments as model inputs. The resulting simulation indicated that as a polymer stiffens due to impinging radiation, it also undergoes weakening of adhesion to the filler. The implication is that radiation induces a compound failure mode in filled polymer systems.

36 MATERIALS SCIENCE↗

Measurements of the Electron Cloud Density in the PEP-II Low Energy Ring

Clouds of low energy electrons in the vacuum beam pipes of accelerators of positively charged particle beams present a serious limitation for operation of these machines at high currents. Because of the size of these accelerators, it is difficult to probe the low energy electron clouds over substantial lengths of the beam pipe. We have developed a novel technique to directly measure the electron cloud density via the phase shift induced in a TE wave that is independently excited and transmitted over a section of the accelerator. We infer the absolute phase shift with relatively high accuracy from the phase modulation of the transmission due to the modulation of the electron cloud density from a gap in the positively charged beam. We have used this technique for the first time to measure the average electron cloud density over a 50 m straight section in the positron ring of the PEP-II collider at the Stanford Linear Accelerator Center. We have also measured the variation of the density by using low field solenoid magnets to control the electrons.

43 PARTICLE ACCELERATORS↗

Ultra-High Gradient S-Band Linac for Laboratory And Industrial Applications

A strong demand for high gradient structures arises from the limited real estate available for linear accelerators. RadiaBeam Technologies is developing a Doubled Energy Compact Accelerator (DECA) structure: an S-band standing wave electron linac designed to operate at accelerating gradients of up to 50 MV/m. In this paper, we present the radio-frequency design of the DECA S-band accelerating structure, operating at 2.856 GHz in the {pi}-mode. The structure design is heavily influenced by NLC collaboration experience with ultra high gradient X-band structures; S-band, however, is chosen to take advantage of commonly available high power S-band klystrons.

43 PARTICLE ACCELERATORS↗

Biochemical Process Modeling and Simulation (BPMS)

The Biochemical Process Modeling and Simulation project aims to reduce the cost and time of research by applying theory, modeling, and simulation to the most relevant bottlenecks in the biochemical process. We use molecular modeling, quantum mechanics, metabolic modeling, fluid dynamics, and reaction-diffusion methods in close collaboration with pretreatment, hydrolysis, upgrading, and TEA. The project's outcomes are increased yields and efficiency of the biochemical process, added value to products, and reduced price of fuels by specifically targeting catalytic efficiency, reactor design, enzyme efficiency, and microbial design. We work closely with experimental projects to identify problems and iterate with experiments to find and refine solutions. By working with experimentalists, we decide on problems that can be solved with simulation that could otherwise not be solved or would take too long with experiment alone to reach BETO's targets. Over the years, we have produced solutions that have resulted in determining the most likely fatty-acid derivative for passive transport out of bacteria that upgrade biomass, and we have also designed enzyme mutations for enhanced lignin upgrading. Metabolic models have been developed to tune the activity of 2,3 butanediol production for the 2030 target. A computational method to deliver understanding of how complex omics data can be interpreted in the metabolic pathways of organisms used in the Agile Biofoundry. We have found methods to overcome specific barriers and continue to develop those methods. Our reactor studies have guided the design of both the microbes and reactors for aerobic and micro-aerobic production at all scales and have been instrumental in improving the accuracy of techno-economic analysis models. This project is essential in the process of selecting the final processes for 2030 SAF production targets. More specifically, recently, we have: 1) Predicted the strength of the basic structural interactions in commodity plastics to provide guidance for plastics upcycling strategies. 2) Developed computational tool to improve the characterization of lignin-derived compounds 3) Developed new methodologies to enable Machine Learning-based Directed Evolution for protein engineering. 4) Developed Machine Learning methods to predict protein promiscuity and mutations to further improve microbial and enzymatic driven processes and demonstrated the utility of ML approaches to engineering proteins from sparse experimental datasets. 5) Developed new methods to enable high-fidelity simulation of aerobic fermentation at industrial scale and resolving mismatch of time scales through subcycling/operator splitting 7) Identified the difficulty in preventing local high-oxygen conditions in industrial bubble columns, which leads to less-desirable acetoin production, suggesting future research directions in alternative reactor configurations (e.g loop reactors, shallow-channel reactors).

BIOMASS FUELS↗

pH- and metal-dependent structural diversity from mononuclear to two-dimensional polymers based on a flexible tricarboxylate ligand

Six complexes based on a flexible tripodal ligand H{sub 3}TTTA (2,2',2''-[1,3,5-triazine-2,4,6-triyltris(thio)]tris-acetic acid) have been hydrothermally synthesized and structurally characterized. X-ray single-crystal diffractions reveal that they have rich structural chemistry: mononuclear, [Zn(HTTTA)(2,2'-bpy)(H{sub 2}O){sub 3}]{sub n} (1); dimeric metallamacrocycle, [Zn(HTTTA)(2,2'-bipy)(H{sub 2}O)]{sub n} (2) and [Cd(HTTTA)(2,2'-bipy)(H{sub 2}O).H{sub 2}O]{sub n} (3); two-dimensional networks with binodal (3,6)-connected CdI{sub 2} topology based on linear trinuclear M{sub 3}({mu}{sup 2}-CO{sup 2}){sub 4}({mu}{sub 2}-CO{sub 2}){sub 2} SBUs (Secondary Building Units), [M{sub 3}(TTTA){sub 2}(2,2'-bipy){sub 2}(H{sub 2}O){sub m}.nH{sub 2}O]{sub n} (M=Zn.4, m=0, n=4; Cd.5 and Mn.6, m=2; n=2). The value of pH and the metal ions has large influences on the resulting structures. The flexible tricarboxylic acid exhibits four coordination modes from monodentate to {mu}{sup 6}-bridge. Fluorescence and magnetic properties of the complexes have also been investigated in details. - Graphical abstract: Six complexes based on a flexible tricarboxylate ligand exhibit rich structural chemistry from mononuclear to 2D (3,6)-connected networks. PH and metal ions have large influences on the resulting structures. Highlights: > Six complexes based on a flexible multicarboxylate ligand have been reported. > They exhibit diverse structures from mono- and binuclear molecules to 2-D layers. > pH and metal ions have large influences on the final products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Status of the framework for research in nuclear science and engineering - 25460

The Framework for Research in Nuclear Science and Engineering (FRENSIE) is a collection of packages written in C++ that are designed primarily to aid in methods development. New features are continually being added to the various packages and as a result, the Forward Adjoint Continuous Energy Monte Carlo (FACEMC) tool provided by FRENSIE continues to undergo verification and validation. While FRENSIE is not currently open source, the ultimate goal is for it to be released as such. A few of the more recent developments in FRENSIE include the addition of combinatorial geometry capabilities using ROOT, tet and hex meshing, support for thermal neutron S (α; β) data, photon Doppler broadening, electron interactions using basic analog electron physics models as well as an elastic moment-preserving model, and atomic relaxation. Preliminary verification results for much of the newly added physics models show good agreement between FACEMC and MCNP6. (authors)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Insights into the Solvation Characteristics of Zwitterionic Deep Eutectic Solvents Using Multiple Polarity Scales

Deep eutectic solvents (DESs) formed by mixing zwitterionic hydrogen bond acceptors (HBAs) with diol- and organic acid-based hydrogen bond donors (HBDs) are popular sustainable solvents. In addition to possessing an amphiphilic character, zwitterionic DESs offer unique solvation properties, unlike those composed of halide-containing HBAs. While all other popular classes of DESs have been investigated, no study has attempted to characterize the solvation characteristics of zwitterionic DESs. In this study, the solvation properties of betaine [Bet]-, sulfobetaine-, and l-carnitine [l-Car]-based DESs were thoroughly investigated for the first time using solvatochromic dye methods and inverse gas chromatography (IGC). Herein, the Nile red polarity scale revealed that DESs composed of organic acids were generally more polar than diol-based DESs. Kamlet–Taft solvent parameters revealed that glycerol-based DESs offered exceptionally high hydrogen bond donating ability compared to those composed of 1,4-butane diol and triethylene glycol. The Abraham solvation parameter model revealed hydrogen bond basicity to be the most dominant interaction, and it was generally higher for diol-based HBDs compared to organic acid-based HBDs. Additionally, sulfobetaine HBAs possessing longer alkyl chains generally offered higher dispersive-type interactions and hydrogen bond basicity compared to [Bet] and [l-Car] salts. This is the first study to combine and compare results from solvatochromic dye methods and IGC in an attempt to comprehensively explain and predict the solvation characteristics of zwitterionic DESs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Unravelling the dynamics of the maturation protein in MS2 bacteriophage via molecular simulations

The MS2 bacteriophage capsid serves as a model system for studying viral structure and function. Mature MS2 virus consists of 178 capsid proteins and a single maturation protein (MP), which is essential for host receptor binding and infection initiation. Despite its critical role, the dynamic behavior of the capsid with the MP remains poorly understood. To address this, we conducted 0.5 µs all-atom molecular dynamics (MD) simulations of the MS2 capsid with and without the MP, revealing key insights into its structural dynamics. Our simulations showed that MP exhibits high flexibility, particularly in the “tip” and “side-loop” regions, which undergo significant motions that likely enhance its ability to engage with the F-pilus receptor. Detailed analysis of MP conformational states revealed that loop rearrangements around H357 enable transient switching between “semi-closed” and “open” conformations, suggesting a conformational selection mechanism for pilus binding. Additionally, ion interaction analyses revealed distinct sodium and chloride binding patterns, where sodium ions were mostly found at the outer capsid shell, while chloride ions interacted with the basic residues on the RNA-facing side. We also found that the presence of the MP enhances salt-bridge interactions, contributing to increased capsid stability, yet it does not significantly alter the pore sizes of pentameric and hexameric units. Together, these findings provide new insights into the functional role of the MP, highlighting its contribution to capsid stability and host receptor engagement. This study offers a foundation for understanding capsid dynamics relevant to viral infectivity and may guide future rational strategies aimed at disrupting host-virus interactions.

Capsid stability↗

Assessing subtle variations in the actinyl oxo reactivity through characterization of neptunyl complexes. Final Report

Formation of the actinyl cation, [An(V,VI)O 2 ] n+ (n = 1,2), imparts unique chemical properties to the lighter actinide elements (U, Np, and Pu) that has yet to be fully understood. The axial O atoms (oxo) of the [An(VI)O 2 ] 2+ are considered weak Lewis bases that exhibit only meager interact with other metal cations and regarded as poor hydrogen acceptors for nearby water molecules. Oxo atoms of [An(V)O 2 ] + should engage in stronger bonding interactions due to a higher degree of Lewis basicity, but the actual interactions have yet to be fully explored. Intermolecular interactions can impact radionuclide separations, corrosion of spent fuel, and mobility of actinides in environmental systems; there is, therefore, a critical need to understand how the subtle difference in electronic properties of the An(V) and An(VI) metal center influence actinyl chemistry. The objective of this proposal was to determine the chemical components that influence the intermolecular interactions occurring between neptunyl ([Np(V)O 2 ] + and [Np(VI)O 2 ] 2+ ) cations and neighboring species. My overall hypothesis was that the intermolecular attraction that occurs between the neptunyl oxo atoms and neighboring species (H atoms, low-valent cations, actinyl cations) is primarily controlled by the electronic properties of the actinyl cation, but can be further influenced by the electron donating properties of the equatorial ligands. The hypothesis was tested through the following research objectives: (1) Determine the fundamental differences in H-bonding between Np(V)O 2+ and Np(VI)O 2 2+ and neighboring donor molecules; (2) Identify the major differences in bonding between low-valence metal cations and neptunyl oxo groups, and (3) Assess the impact of the equatorial ligand on the formation of cation-cation interactions within molecular species. Major outcomes of the research include: (1) More precisely identifying oxo interactions (actinyl-cation; actinyl-actinyl, actinyl-hydrogen) and the factors that impact the vibrational modes for actinyl cation; (2) Identification of H-bonding modes for the [An(V,VI)O 2 ] n+ (n = 1,2), with direct H-bonding interactions to the oxo group of the Np(V)O 2+ cation more prevalent than in hexavalent species and recognition of the importance of H-bonding networks, that can impart bond asymmetry and activation of vibrational modes with the actinyl moiety; (3) Delineation of the importance of charge density for engaging the cation-oxo interaction for both pentavalent and hexavalent species; (4) Determining the importance of sterics and ligand binding in formation of specific actinyl-actinyl interactions and the resulting vibrational modes associated with this bonding motify and (5) Understanding how the functionalization of the ligand can impact redox stability of neptunyl cations. Deliverables from this work include 11 peer-reviewed manuscripts and 13 (including six by graduate students) oral/poster presentations.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Highly Efficient and Reversible SO(2) Capture by Tunable Azole-Based Ionic Liquids through Multiple-Site Chemical Absorption

A novel strategy for SO{sub 2} capture through multiple-site absorption in the anion of several azole-based ionic liquids is reported. An extremely high capacity of SO{sub 2} (>3.5 mol/mol) and excellent reversibility (28 recycles) were achieved by tuning the interaction between the basic anion and acidic SO{sub 2}. Spectroscopic investigations and quantum-mechanical calculations showed that such high SO{sub 2} capacity originates from the multiple sites of interaction between the anion and SO{sub 2}. These tunable azole-based ionic liquids with multiple sites offer significant improvements over commonly used absorbents, indicating the promise for industrial applications in acid gas separation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Getting back to the grass roots: harnessing specialized metabolites for improved crop stress resilience

Roots remain understudied as the site of complex and important biological interactions mediating plant productivity. In grain and bioenergy crops, grass root specialized metabolites (GRSM) are central to key interactions, yet our basic knowledge of the chemical language remains fragmentary. Continued improvements in plant genome assembly and metabolomics are enabling large-scale advances in the discovery of specialized metabolic pathways as a means of regulating root-biotic interactions. Metabolomics, transcript coexpression analyses, forward genetic studies, gene synthesis and heterologous expression assays drive efficient pathway discoveries. Functional genetic variants identified through genome wide analyses, targeted CRISPR/Cas9 approaches, and both native and non-native overexpression studies critically inform novel strategies for bioengineering metabolic pathways to improve plant traits.

59 BASIC BIOLOGICAL SCIENCES↗

mRNA bound to the 30S subunit is a HigB toxin substrate

Activation of bacterial toxins during stress results in cleavage of mRNAs in the context of the ribosome. These toxins are thought to function as global translational inhibitors yet recent studies suggest each may have distinct mRNA specificities that result in selective translation for bacterial survival. Here we demonstrate that mRNA in the context of a bacterial 30S subunit is sufficient for ribosome-dependent toxin HigB endonucleolytic activity, suggesting that HigB interferes with the initiation step of translation. We determined the X-ray crystal structure of HigB bound to the 30S, revealing that two solvent-exposed clusters of HigB basic residues directly interact with 30S 16S rRNA helices 18, 30, and 31. We further show that these HigB residues are essential for ribosome recognition and function. Comparison with other ribosome-dependent toxins RelE and YoeB reveals that each interacts with similar features of the 30S aminoacyl (A) site yet does so through presentation of diverse structural motifs.

59 BASIC BIOLOGICAL SCIENCES↗