Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Antennas”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

A Theoretical Investigation of the Input Characteristics of a Rectangular Cavity-Backed Slot Antenna

Equations which represent the magnetic and electric stored energies are derived for an infinite section of rectangular waveguide and a rectangular cavity. These representations which are referred to as being physically observable are obtained by considering the difference in the volume integrals appearing in the complex Poynting theorem. It is shown that the physically observable stored energies are determined by the field components that vanish in a reference plane outside the aperture. These physically observable representations are used to compute the input admittance of a rectangular cavity-backed slot antenna in which a single propagating wave is assumed to exist in the cavity. The slot is excited by a voltage source connected across its center; a sinusoidal distribution is assumed in the slot. Input-admittance calculations are compared with measured data. In addition, input-admittance curves as a function of electrical slot length are presented for several size cavities. For the rectangular cavity backed slot antenna, the quality factor and relative bandwidth were computed independently by using these energy relationships. It is shown that the asymptotic relationship which is usually assumed to exist between the quality bandwidth and the reciprocal of relative bandwidth is equally valid for the rectangular cavity backed slot antenna.

Cockrell, C. R.↗
NASA NTRS1975

Broadband antenna systems for lightning magnetic fields

Broadband magnetic antenna systems suitable for recording submicrosecond field changes are described, and typical data from distant lightning are presented. Two types of systems are described, one with a high-impedance antenna loop connected to the integrator by a twisted pair of coaxial cables and another with the antenna loop and twisted signal loops formed from a single piece of coaxial cable. Data for correlated magnetic and electric field waveforms from lightning at a distance of 50 to 100 km are presented and are shown to be almost identical.

Krider, E. P.↗
NASA NTRS1975

A study of KC-135 aircraft antenna patterns

Numerical solutions for the radiation patterns of aircraft antennas provide and excellent means of designing and locating antennas in order to achieve the desired performance. The high frequency solutions presented in this paper are based on fuselage antennas mounted on a general-type aircraft but applied specifically to the KC-135 aircraft. The roll and elevation plane patterns are computed for a monopole, axial slot, and circumferential slot mounted both over and forward of the wings. In each case the calculated patterns compare very favorably with the measured patterns. The precision pattern measurements were taken on a 1/25 scale model of the KC-135 aircraft at NASA (Hampton, Va.) with special emphasis on reducing the mount and background effects.

Burnside, W. D.↗
NASA NTRS1975

Antenna pattern corrections to microwave radiometer temperature calculations

In making microwave radiometer calculations of sea surface temperature, it is necessary to consider the errors resulting from the antenna radiation pattern. This is especially true for antennas with high sidelobes that are scanned in viewing angle and for antennas with high cross-polarized components. It is concluded that the plane wave brightness temperature is not by itself sufficient to describe the true radiometer temperature of the sea surface. This discrepancy can be attributed to one or more of the following: failure to use the total radiation pattern, error in determining the sea surface dielectric constant, error in sky model profile, or radiation pattern spillover onto water surroundings.

Beck, F. B.↗
NASA NTRS1977

Active retrodirective antenna

Active antenna is self-phasing array which transmits signal in direction of remote pilot source. Word "active" means that transmitted power is generated by sources associated with antenna rather than by reflection of incident signal, as in passive retrodirective antenna. Array is also known as self-focusing array.

Chernoff, R. C.↗
NASA NTRS1975

Large furlable antenna study

The parametric study of the performance of large furlable antennas is described and the availability of various size antennas is discussed. Three types of unfurlable reflector designs are considered: the wrapped rib, the polyconic, and the maypole. On the basis of these approaches, a space shuttle launch capability, and state-of-the-art materials, it is possible to design unfurlable reflectors as large as 130 feet (40 meters) in diameter to operate at 10 GHz and 600 feet (183 meters) in diameter at 0.5 GHz. These figures can be increased if very low thermal coefficient of expansion materials can be developed over the next 2-5 years. It is recommended that a special effort be made to develop light weight materials that would provide nearly zero thermal coefficient of expansion and good thermal conductivity within the next 10 years. A conservative prediction of the kinds of unfurlable spacecraft antennas that will be available by 1985 with orbital performance predicted on the basis of test data and with developed manufacturing processes is summarized.

Campbell, G. K. C.↗
NASA NTRS1975

Development of components for an S-band phased array antenna subsystem

The system requirements, module test data, and S-band phased array subsystem test data are discussed. Of the two approaches to achieving antenna gain (mechanically steered reflector or electronically steered phased array), the phased array approach offers the greatest simplicity and lowest cost (size, weight, power, and dollars) for this medium gain. A competitive system design is described as well as hardware evaluation which will lead to timely availability of this technology for implementing such a system. The objectives of the study were: to fabricate and test six engineering model transmit/receive microelectronics modules; to design, fabricate, and test one dc and logic multilayer manifold; and to integrate and test an S-band phased array antenna subsystem composed of antenna elements, seven T/R modules, RF manifolds and dc manifold.

Source record↗
NASA NTRS1975

Performance of DSS 13 26-m antenna at X-band

The X-band low-noise antenna (XLA) measurement feedcone was operated on the DSS 13 26-m antenna at Goldstone, California, during June 1975 to evaluate, primarily, the overall system efficiency. Radio sources were selected, commonly accepted values of flux density established, and measurements completed, and some conclusions were drawn. The antenna system presently suffers from poor pointing stability. On the other hand, the previously welded and rebolted main reflector has remained quite stable over a period of approximately 5 years.

Freiley, A. J.↗
NASA NTRS1976

Prototype 10-meter radio telescope antenna and mount design

A prototype radio antenna of 10.4 meters diameter and 0.41 meter focal length, intended for use at the shortest radio wavelengths transmitted by the atmosphere, was successfully completed. The surface accuracy is at least four times better than that of any existing antenna in this size class: 50 micrometer rms. A prototype mount is being constructed and will be ready by early 1976. The development of an improved antenna of identical size, but heavier weight has been continued.

Leighton, R. B.↗
NASA NTRS1976

Multiple dielectric layer effects on the space shuttle orbiter S-band quad antennas

A mathematical tool is developed for evaluation of antenna radiation pattern effects on the shuttle orbiter S band quad antennas. A ray optics approach is used which includes multiple internal reflections with special consideration to reflection from the metallic orbiter skin. Significant depolarization may occur as the angle from the normal increases. The effect of changing tile thickness on the beamwidth of the upper quads versus the lower quads results in a small increase in the lower quad beamwidth compared with the beamwidth in the upper quads. The optimization and evaluation of the S band quads and the computer tool developed may be used to evaluate other shuttle orbiter antennas.

Lindsey, J. F.↗
NASA NTRS1976

Conceptual studies for new low-cost 64-m antennas

Recent software developments expedite design investigations of proposed new 64-m antenna structures. The software consists of programs to generate structure model data and a design program that chooses preferential cross sectional sizes of the structural members. Numerous new designs are summarized that can represent weight savings of from 25% to 50% with respect to the tipping weight of the existing Mars antenna. These designs provide a more favorable symmetrical support for the reflector backup and tend to provide superior surface accuracy for gravity, although not necessarily wind, loading on the antenna.

Levy, R.↗
NASA NTRS1976

The design, development, and flight test results of the Boeing 737 aircraft antennas for the ICAO demonstration of the TRSB microwave landing system

The Research Support Flight System, a modified Boeing 737, was used to evaluate the performance of several aircraft antennas and locations for the Time Reference Scanning Beam (TRSB) Microwave Landing System (MLS). These tests were conducted at the National Aviation Facilities Experimental Center (NAFEC), Atlantic City, New Jersey on December 18, 1975. The flight tests measured the signal strength and all pertinent MLS data during a straight-in approach, a racetrack approach, and ICAO approach profiles using the independent antenna-receiver combinations simultaneously on the aircraft. Signal drop-outs were experienced during the various approaches but only a small percentage could be attributed to antenna pattern effects.

Campbell, T. G.↗
NASA NTRS1976

Furlable antenna

An improved furlable antenna particularly suited for use in a celestial space environment is described. The antenna is characterized by an actuator comprising an elastomeric member of an annular configuration, an annular array of uniformly spaced antenna ribs rigidly affixed at the base ends to an actuator which enables it to be supported for pivotal displacement from a deployed configuration. The ribs are radially extended from the actuator to a furled configuration. The ribs are extended parallel to the axis of the actuator with flexible reflecting web affixed to the ribs, with angularly spaced bearing blocks.

Barnett, M. A.↗
NASA NTRS1976

Tracker implementation for the orbiter Ku-band communications antenna

Possible implementations and recommendations for the Space Shuttle Ku-Band integrated communications/radar antenna tracking system were evaluated. Communication aspects involving the Tracking Data Relay Satellite (TDRS)/Orbiter Ku-Band link are emphasized. Detailed analysis of antenna sizes, gains and signal-to-noise ratios shows the desirability of using maximum size 36-inch diameter dish and a triple channel monopulse. The use of the original baselined 20 inch dish is found to result in excessive acquisition time since the despread signal would be used in the tracking loop. An evaluation of scan procedures which includes vehicle dynamics, designation error, time for acquisition and probability of acquisition shows that the conical scan is preferred since the time for lock-on for relatively slow look angle rates will be significantly shorter than the raster scan. Significant improvement in spherical coverage may be obtained by reorienting the antenna gimbal to obtain maximum blockage overlap.

Rudnicki, J. F.↗
NASA NTRS1975

Large Deployable Antenna Shuttle Experiment

An experiment designed to use the Space Shuttle in tests of the mechanical and electrical properties of spaceborne deployable antennas under zero-gravity conditions is outlined. Space-erectable 20-meter diameter phased arrays or reflector/feed systems, and self-deploying mechanisms, are to be tested. Reflector surface integrity will be tested by an AM laser technique, and electrical behavior will be tested by a spin-stabilized RF beacon injected into orbit prior to unfurlment of the antenna. Focusing and gain measurements, static pattern measurements, dynamic RF gain measurements, and measurements of cross-polarized signals will be conducted, and the reflector will be illuminated by separate feeds for the S-, X-, and K-bands. Mechanical features of the mesh-wrapped rib furlable antenna design are described.

Freeland, R. E.↗
NASA NTRS1976

Dielectric coated wire antennas

An electrically thin dielectric insulating shell on an antenna composed of electrically thin circular cylindrical wires is examined. A moment method solution is obtained, and the insulating shell is modeled by equivalent volume polarization currents. These polarization currents are related in a simple manner to the surface charge density on the wire antenna. In this way the insulating shell causes no new unknowns to be introduced, and the size of the impedance matrix is the same as for the uninsulated wires. The insulation is accounted for entirely through a modification of the symmetric impedance matrix. This modification influences the current distribution, impedance, efficiency, field patterns, and scattering properties. The theory is compared with measurement for dielectric coated antennas in air.

Richmond, J. H.↗
NASA NTRS1977

Design study of TDRS antenna gimbal system for LANDSAT-D

The conceptual design studies of a two axis antenna drive assembly for the TDRSS link communications subsystem for LANDSAT D are presented. The recommended antenna drive assembly is a simple and reliable design substantially similar to the antenna and solar array drives developed and space qualified for programs such as DSCS 2 and FltSatCom. The gimbal design tradeoff is presented, along with drive electronics.

Wu, J.↗
NASA NTRS1977

Microwave performance characterization of large space antennas

Performance capabilities of large microwave space antenna configurations with apertures generally from 100 wavelengths upwards are discussed. Types of antennas considered include: phased arrays, lenses, reflectors, and hybrid combinations of phased arrays with reflectors or lenses. The performance characteristics of these broad classes of antennas are examined and compared in terms of applications.

Bathker, D. A.↗