Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Absorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Moderate spectral resolution observations of 3 micron absorption features in highly obscured objects

The 3 micron absorption spectra of sources seen in or behind molecular clouds generally show a variety of absorption features. Three separate absorptions are used to explain these features. The cooled-grating array spectrometer (CGAS) at the NASA Infrared Telescope Facility was used to obtain spectra of the late-type mass-loss star OH 0739-12 and the protostars MonR2 IRS-2 and IRS-3 (solid circles). The differences between the spectra are discussed.

Smith, R. G.↗

OH radical measurements by optical absorption spectroscopy

The long path absorption spectroscopy (LPA) measurement of OH utilizes the strong UV absorption spectrum of the molecule with well resolved rotational lines around 308 nm. The light source consists of an Ar ion laser pumped CW dye laser, the output of which is frequency doubled to emit a spectrally smooth light profile of 0.1 nm FWHM at 308 nm. This is considerably broader than the sharp (0.0018 nm wide) absorption features of OH and also wider than the total spectral region (0.06 nm) scanned around the OH lines. For field measurements a Cassegrain-type telescope expands the small diameter of the original laser beam by a factor of 50 to about a 0.25-m diameter in order to reduce the divergence of the beam as well as its mean photon flux density, thus reducing the maximum self-generated OH concentration to 40,000 cu. cm. The light is passed into the open atmosphere and reflected at about 5 km distance resulting in a 10-km light path length. A telescope focuses the returning light onto the entrance slit of a monochromator the single exit slit of which is replaced by a mechanical scanning device operating at a scan repetition rate of 6.6 KHz. For a typical measurement (1h duration) some 20,000,000 scans are averaged, rendering the contribution of atmospheric turbulence to the spectral noise negligible.

Platt, U.↗

A method of predicting the energy-absorption capability of composite subfloor beams

A simple method of predicting the energy-absorption capability of composite subfloor beam structure was developed. The method is based upon the weighted sum of the energy-absorption capability of constituent elements of a subfloor beam. An empirical data base of energy absorption results from circular and square cross section tube specimens were used in the prediction capability. The procedure is applicable to a wide range of subfloor beam structure. The procedure was demonstrated on three subfloor beam concepts. Agreement between test and prediction was within seven percent for all three cases.

Farley, Gary L.↗

Absorption Cross-Sections of Sodium Diatomic Molecules

The absorption cross sections of sodium dimers were studied using a heat pipe over operating in the non-heat-pipe mode. Three wavelength regions were observed. They are in the red, the green-blue, and the near ultraviolet regions. The absorption cross section depends on the wavelength of the incident light. Representative peak values for the v"=0 progression in the red and green-blue regions are 2.59 A sup 2 (average value) and 11.77 A sup 2 (T sub ave=624 K). The value for the C greater than X transitions is several tenths A sup 2. The cross sections were measured from absorption spectra taken as a function of temperature.

Fong, Zeng-Shevan↗

Atlas of Absorption Lines from 0 to 17900 Cm (sup)-1

Plots of logarithm (base 10) of absorption line strength versus wavenumber from 0 to 17900/cm(sup)-1 are shown for the 28 atmospheric gases (H2O, CO2, O3, N2O, CO, CH4, O2, NO, SO2, NO2, NH3, HNO3, OH, HF, HCl, HBr, HI, ClO, OCS, H2CO, HOCl, N2, HCN, CH3Cl, H2O2, C2H2, C2H6, PH3), which appear in the 1986 Air Force Geophysics Laboratory high-resolution transmission molecular absorption data base (HITRAN) compilation, and for O(P-3), O-18 isotopic ozone, and HO2 from the 1984 JPL compilation in the 0- to 200/cm(sup)-1 region, and infrared solar CO lines at 4500 K. Also shown are plots of logarithm (base 10) of approximate infrared absorption cross sections of 11 heavy molecules versus wavenumber. The cross-section data cover 700 to 1800/cm(sup)-1 and are included as a separate data file in the 1986 HITRAN database.

Park, J. H.↗

Parameterization of near infrared absorption by atmospheric gases

An absorption coefficient (k) distribution model is presented for fast calculation of atmospheric transmittances based solely on essential data from line-by-line (LBL) calculations. The absorption at any site is summed over the spectra obtained by LBL calculations. Application of the scaling model is illustrated with sample calculations for 0.72 micron emissions and the 1.36 micron water vapor band. LBL absorption spectra are calculated for the pressure levels 260 mb, 400 mb and 1000 mb.

Ridgway, W. L.↗

Absorption cross section measurements of oxygen in the wavelength region 195-241 nm of the Herzberg continuum

The continuous absorption cross section of oxygen in the region 205-241 nm is studied as a function of path length and oxygen pressure. The technique used to study the continuous absorption cross section is described. Cross section measurements of oxygen in the wavelength region 193-205 nm obtained by Cheung et al. (1984) are applied in this experiment. The measured cross section is analyzed in terms of a Herzberg continuum and a pressure-dependent continuum. The total measured continuum cross section, the cross section involving two molecules of O2, and the Herzberg continuum absorption cross section values are calculated. It is observed that the Herzberg continuum cross section of oxygen values measured at 1 nm intervals in the region 195-241 nm, increase from 6.3 x 10 to the -24th sq cm at 195 nm to a maximum of 6.6 x 10 to the -24th sq cm at 201 nm and then decrease to 0.85 x 10 to the -24th sq cm at 241 nm. The Herzberg values are compared with data from previous investigations and the values correlate well.

Cheung, A. S.-C.↗

A method of predicting the energy-absorption capability of composite subfloor beams

A simple method of predicting the energy-absorption capability of composite subfloor beam structure has been developed. The method is based upon the weighted sum of the energy-absorption capability of constituent elements of a subfloor beam. An empirical data base of energy absorption results from circular and square cross section tube specimens were used in the prediction capability. The procedure is applicable to a wide range of subfloor beam structure. The procedure was demonstrated on three subfloor beam concepts. Agreement between test and prediction was within seven percent for all three cases.

Farley, Gary L.↗

Satellite sensing of aerosol absorption

A method is developed for remote sensing of aerosol absorption from satellite images of the earth's surface. The method is based on the measurement of the change in the upward radiances between a clear and a hazy day over a varying surface reflectance. For a zero change balance between brightening due to scattering and darkening due to absorption and scattering is reached. This balance is utilized via a radiative transfer model to derive the aerosol single-scattering albedo. A sensitivity study is performed, and the method is tested against laboratory measurements. It is suggested that for the case of haze introduced on top of an existing background aerosol and with a fair estimate of the scattering phase function, the error in the remotely sensed single-scattering albedo is in the range of 0.03-0.05. The main errors in the method arise from variations in the surface reflectance between the clear and the hazy days, uncertainty in the scattering phase function, and variation of the aerosol and gaseous absorption between these two days. If the satellite calibration varies with time, the measurements of single-scattering albedo can be substantially affected.

Kaufman, Yoram J.↗

Relationships between vegetation indices, radiation absorption, and net photosynthesis evaluated by a sensitivity analysis

A two-stream approximation to the radiative-transfer equation is used to calculate the vegetation indices (simple ratio and normalized difference), the fraction of incident photosynthetically active radiation (PAR) absorbed by the canopy, and the daily mean canopy net photosynthesis under clear-sky conditions. The model calculations are tested against field observations over wheat, cotton, corn, and soybean. The relationships between the vegetation indices and radiation absorption or net photosynthesis are generally found to be curvilinear, and changes in the soil reflectance affected these relationships. The curvilinearity of the relationship between normalized differences and PAR absorption decreases as the magnitude of soil reflectance increases. The vegetation indices might provide the fractional radiation absorption with some a priori knowledge about soil reflectance. The relationship between the vegetation indices and net photosynthesis must be distinguished for C3 and C4 crops. Effects of spatial heterogeneity are discussed.

Choudhury, Bhaskar J.↗

Methane absorption variations in the spectrum of Pluto

The lightcurve phases of 0.18, 0.35, 0.49, and 0.98 covered by 5600-10,500 A absolute spectrophotometry of Pluto during four nights include minimum (0.98) light and one near-maximum (0.49) light. The spectra are noted to exhibit significant methane band absorption depth variations at 6200, 7200, 7900, 8400, 8600, 8900, and 10,000 A, with the minimum absorption occurring at minimum light and thereby indicating a 30-percent change in the methane column abundance in the course of three days. An attempt is made to model this absorption strength variation with rotational phase terms of an isotropic surface distribution of methane frost and a clear layer of CH4 gas.

Buie, Marc W.↗

Intracavity absorption with a continuous wave dye laser - Quantification for a narrowband absorber

An experimental investigation of the dependence of intracavity absorption on factors including transition strength, concentration, absorber path length, and pump power is presented for a CW dye laser with a narrow-band absorber (NO2). A Beer-Lambert type relationship is found over a small but useful range of these parameters. Quantitative measurement of intracavity absorption from the dye laser spectral profiles showed enhancements up to 12,000 (for pump powers near lasing threshold) when compared to extracavity measurements. The definition of an intracavity absorption coefficient allowed the determination of accurate transition strength ratios, demonstrating the reliability of the method.

Brobst, William D.↗

Long-wavelength absorption by fractal dust grains

The far-infrared and submillimeter absorption properties of random aggregates of conducting spheres have been studied as a possible source for the long-wavelength absorption of interstellar dust grains. The complex shapes of random aggregates have various fractal dimensions, depending on the process that forms them. The long wavelength absorption versus frequency is affected more by the shape of a conducting grain than by its composition.

Wright, Edward L.↗

Measurement and analysis of the far infrared absorption spectrum of the gaseous mixture H2-CH4

The collision-induced absorption of H2-CH4 mixtures was measured from 20 to 900/cm at 195 and 297 K. By subtracting the absorption due to H2-H2 and CH4-CH4 collisions from that of the mixture, the absorption due to H2-CH4 collisions was obtained. This spectrum was analyzed using the BC model line shape to provide a way of estimating the far-IR spectrum of H2-CH4 for various concentrations of H2 and CH4. Theoretical spectral moments were computed with different potential functions and compared with experimental values.

Birnbaum, George↗

PG 1411 + 442 - The nearest broad absorption line quasar

IUE observations reveal strong, moderately broad absorption troughs in the blue wings of the C IV and N V emission lines of the quasar PG 1411 + 442. No absorption from weakly ionized gas is detected. The emission-line strengths and overall shape of the ultraviolet/optical/near-infrared/far-infrared continuum of the new broad absorption line quasar are within the range normally measured in quasars. Its redshift is low enough to allow the morphology of the host galaxy to be studied in deep broad-band and intermediate-band CCD images. The galaxy appears to be a large spiral with a very long arm or tail. The inclination angle is 57 deg, which rules out the possibility that the line of sight to the nucleus intersects a large path length in a galactic disk.

Malkan, Matthew A.↗

Quasar absorption lines and galaxy halos

The evolution of the halo environments of the Galaxy and of other galaxies at early epochs is discussed, summarizing the results of observations of quasar absorption lines obtained with the IUE satellite since its launch in 1978. Topics addressed include the Ly-alpha forest, nearby galaxies, displaced absorption systems, and systems with z(a) approximately equal to z(e). The data are presented in sample spectra and graphs and described in detail. It is suggested that definitive answers on the production of quasar absorption lines by the extended gaseous halos and/or disks of distant galaxies must await the higher-quality observational data to become available with the Hubble Space Telescope.

Bergeron, Jacqueline↗

High-velocity ultraviolet iron, silicon, oxygen, and sulfur absorption features associated with the remnant of SN 1006

New low-dispersion IUE spectra of a faint sdOb star located in a direction near the center of the SN 1006 remnant are presented. The UV spectrum of the star exhibits several strong absorption features which are uncharacteristic of its optical sdOB star classification. The identification by Wu et al. (1983) of very broad absorption features at 1610, 2370, 2600 A as Fe II gas associated with the SN 1006 remnant is supported. The observed Fe II line profiles indicate a concentration of Fe(+) toward the remnant's center with a radial velocity range on the order of + or - 5000 km/s. Strong absorption lines at 1281, 1331, and 1420 A are interpreted as originating from clumps of O-, Si- and S-rich ejecta with central radial velocities in the range 5000-6500 km/s. The presence in the SN 1006 remnant of an expanding sphere of iron-rich ejecta interior to O-, Si-, and S-rich clumps of ejecta having velocities over the maximum seen for the Fe II absorbing gas is consistent with type Ia Sn observations and carbon deflagration models.

Fesen, Robert A.↗

Voyager and IUE observations of 3C 273 - Detection of possible Lyman continuum absorption in a nearby (z = 0.158) quasar

Results of near-simultaneous IUE and Voyager ultraviolet spectrometer (UVS) observations of 3C 273, obtained during the period of 1985 late July-early August are reported. The UVS data show a significant drop in flux for observed wavelengths below 1060 A. This may be due to Lyman continuum absorption in the rest frame of 3C 273. If so, then the lack of associated Lyman-alpha absorption severely constrains the properties of the absorbing medium. The most plausible explanation may therefore be that the edge is due to absorption in an accretion disk within the nucleus of 3C 273. Alternatively, models in which the drop in flux is due to a turnover in the underlying continuum cannot be excluded; this interpretation raises serious questions concerning the total energy budget in the broad-line regions. In either case, there can be no reddening of the source of continuum emission other than that due to the Galaxy.

Reichert, G. A.↗