Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AUGMENTATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Augmented heat transfer in rectangular channels of narrow aspect ratios with rib turbulators

The effects of the rib angle-of-attack on the distributions of the local heat transfer coefficient and on the friction factors in short rectangular channels of narrow aspect ratios with a pair of opposite rib-roughened walls are determined for Reynolds numbers from 10,000 to 60,000. The channel width-to-height ratios are 2/4 and 1/4; the corresponding rib angles-of-attack are 90, 60, 45, and 30 deg, respectively. The results indicate that the narrow-aspect-ratio channels give better heat transfer performance than the wide-aspect-ratio channels for a constant pumping power. Semiempirical friction and heat transfer correlations are obtained. The results can be used in the design of turbine cooling channels of narrow aspect ratios.

Han, J. C.↗
NASA NTRS1990

Updating and augmenting NASA spacelink electronic information system

NASA's Spacelink is a collection of NASA information and educational materials stored on a computer at the Marshall Space Flight Center (MFSC). It is provided by the NASA Education Affairs Division and is operated by the Public Services and Education Branch of the MFSC Public Affairs Office. It is designed to communicate with a wide variety of computers and modems, especially those most commonly found in classrooms and homes. The system may be accessed by the educators and the public over regular telephone lines. NASA Spacelink is free except for the cost of long distance calls. The material prepared for Spacelink was found to be widespread by teachers and others across the nation and is being used to stimulate students in their quest for excellence. A partial summary of Spacelinks usage is presented.

Blake, Jean A.↗
NASA NTRS1991

Augmentation of the space station module power management and distribution breadboard

The space station module power management and distribution (SSM/PMAD) breadboard models power distribution and management, including scheduling, load prioritization, and a fault detection, identification, and recovery (FDIR) system within a Space Station Freedom habitation or laboratory module. This 120 VDC system is capable of distributing up to 30 kW of power among more than 25 loads. In addition to the power distribution hardware, the system includes computer control through a hierarchy of processes. The lowest level consists of fast, simple (from a computing standpoint) switchgear that is capable of quickly safing the system. At the next level are local load center processors, (LLP's) which execute load scheduling, perform redundant switching, and shed loads which use more than scheduled power. Above the LLP's are three cooperating artificial intelligence (AI) systems which manage load prioritizations, load scheduling, load shedding, and fault recovery and management. Recent upgrades to hardware and modifications to software at both the LLP and AI system levels promise a drastic increase in speed, a significant increase in functionality and reliability, and potential for further examination of advanced automation techniques. The background, SSM/PMAD, interface to the Lewis Research Center test bed, the large autonomous spacecraft electrical power system, and future plans are discussed.

Walls, Bryan↗
NASA NTRS1991

Standard remote manipulator system docking target augmentation for automated docking

A docking target is provided for use in automated docking of a first vehicle on which the target is located. The target comprises a pair of laterally extending arm portions lying in substantially the same plane and a central post extending outwardly from the plane of the arm portions. At least three reflectors are located on the target. Two of the reflectors are located at the outboard ends of the arms portions and another reflector is located at the end of the central post. In an important embodiment, the reflectors comprise individual pieces of retroreflective tape. The reflectors, when viewed from the front of the target, are aligned along the longitudinal center line of the target, and can take a number of different shapes including circular or square.

Dabney, Richard W.↗
NASA NTRS1991

An investigation of a contoured wall injector for hypervelocity mixing augmentation

An experimental and computational investigation of a contoured wall fuel injector is presented. The injector was aimed at enabling shock-enhanced mixing for the supersonic combustion ramjet engines currently envisioned for applications on hypersonic vehicles. Three-dimensional flow field surveys, and temporally-resolved planar Rayleigh scattering measurements are presented for Mach 1.7 helium injection into Mach 6 air. These experimental data are compared directly with a three-dimensional Navier-Stokes simulation of the flow about the injector array. Two dominant axial vorticity sources are identified and characterized. The axial vorticity produced strong convective mixing of the injectant with the freestream. Shock-impingement was particularly effective as it assured seeding of baroclinic vorticity directly on the helium/air interface. The vorticity coalesced into a counter-rotating vortex pair of a sense which produced migration of the helium away from the wall. The influences of spatial averaging on the representation of the flow field as well as the importance of the fluctuating component of the flow in producing molecularly-mixed fluid are addressed.

Waitz, Ian A.↗
NASA NTRS1991

Flying quality analysis and flight evaluation of a highly augmented combat rotorcraft

This paper discusses implications of digital flight control system design for rotorcraft and illustrates the analysis of the resulting handling qualities obtained with the Advanced Digital Optical Control System demonstrator in the context of the proposed new handling-qualities specification for rotorcraft. Topics covered are digital flight control design and analysis methods, flight testing techniques, handling-qualities evaluation results, and correlation of flight test results with analytical models and the proposed handling-qualities specification. The evaluation of the demonstrator system indicates desirable response characteristics based on equivalent damping and frequency, but undersirably large effective time delays (exceeding 240 ms in all axes). Piloted handling qualities are found to be desirable or adequate for all low, medium, and high pilot gain tasks, but handling qualities are inadequate for ultrahigh gain tasks such as slope and running landings. Correlation of these results with the proposed handling-qualities specification indicates good agreement for the bandwidth boundaries, but suggests the need for more stringent limits on allowable phase delay. Analytical models based on emulation (s-plane) techniques compare favorably with flight-extracted frequency-domain characteristics of the overall (end-to-end) system responses.

Tischler, Mark B.↗
NASA NTRS1991

Overhauling, updating and augmenting NASA spacelink electronic information system

NASA/Spacelink is a collection of NASA information and educational materials stored on a computer at the MSFC. It is provided by the NASA Educational Affairs Division and is operated by the Education Branch of the Marshall Center Public Affairs Office. It is designed to communicate with a wide variety of computers and modems, especially those most commonly found in classrooms and homes. It was made available to the public in February, 1988. The system may be accessed by educators and the public over regular telephone lines. NASA/Spacelink is free except for the cost of long distance calls. Overhauling and updating Spacelink was done to refurbish NASA/Spacelink, a very valuable resource medium. Several new classroom activities and miscellaneous topics were edited and entered into Spacelink. One of the areas that received a major overhaul (under the guidance of Amos Crisp) was the SPINOFFS BENEFITS, the great benefits resulting from America's space explorations. The Spinoff Benefits include information on a variety of topics including agriculture, communication, the computer, consumer, energy, equipment and materials, food, health, home, industry, medicine, natural resources, public services, recreation, safety, sports, and transportation. In addition to the Space Program Spinoff Benefits, the following is a partial list of some of the material updated and introduced: Astronaut Biographies, Miscellaneous Aeronautics Classroom Activities, Miscellaneous Astronomy Classroom Activities, Miscellaneous Rocketry Classroom Activities, Miscellaneous Classroom Activities, NASA and Its Center, NASA Areas of Research, NASA Patents, Licensing, NASA Technology Transfer, Pictures from Space Classroom Activities, Status of Current NASA Projects, Using Art to Teach Science, and Word Puzzles for Use in the Classroom.

Blake, Jean A.↗
NASA NTRS1992

Optimal placement of active elements in control augmented structural synthesis

A methodology for structural/control synthesis is presented in which the optimal location of active members is treated in terms of (0,1) variables. Structural member sizes, control gains and (0,1) placement variables are treated simultaneously as design variables. Optimization is carried out by generating and solving a sequence of explicit approximate problems using a branch and bound strategy. Intermediate design variable and intermediate response quantity concepts are used to enhance the quality of the approximate design problems. Numerical results for example problems are presented to illustrate the efficacy of the design procedure set forth.

Sepulveda, A. E.↗
NASA NTRS1992

SPACEHAB - Augmenting the Shuttle's middeck capacity

SPACEHAB, Inc. is developing a pressurized laboratory which fits in the forward portion of the Space Shuttle payload bay and connects to the crew compartment through an airlock. SPACEHAB's standard middeck-type lockers offer crew-tended access to the microgravity environment for experimentation, technology development, and small-scale production. NASA's Office of Commercial Programs has contracted with SPACEHAB to lease two-thirds of the SPACEHAB's module capacity over the first six missions for commercial research initiatives. Use of SPACELAB modules also offers an economical intermediate step prior to making a full commitment for commercial use of Space Station Freedom.

Stone, Barbara A.↗
NASA NTRS1993

Augmented Computer Mouse Would Measure Applied Force

Proposed computer mouse measures force of contact applied by user. Adds another dimension to two-dimensional-position-measuring capability of conventional computer mouse; force measurement designated to represent any desired continuously variable function of time and position, such as control force, acceleration, velocity, or position along axis perpendicular to computer video display. Proposed mouse enhances sense of realism and intuition in interaction between operator and computer. Useful in such applications as three-dimensional computer graphics, computer games, and mathematical modeling of dynamics.

Li, Larry C. H.↗
NASA NTRS1992

The interannual variability of polar cap recessions as a measure of Martian climate and weather: Using Earth-based data to augment the time line for the Mars observer mapping mission

The recessions of the polar ice caps are the most visible and most studied indication of seasonal change on Mars. Circumstantial evidence links these recessions to the seasonal cycles of CO2, water, and dust. The possible advent of a planet encircling storm during the Mars Observer (MO) mission will provide a detailed correlation with a cap recession for that one Martian year. That cap recession will then be compared with other storm and nonstorm years. MO data will also provide a stronger link between cap recessions and the water and CO2 cycles. Cap recession variability might also be used to determine the variability of these cycles. After nearly a century of valiant attempts at measuring polar cap recessions, including Mariner 9 and Viking data, MO will provide the first comprehensive dataset. In contrast to MO, the older data are much less detailed and precise and could be forgotten, except that it will still be the only information on interannual variability. By obtaining simultaneous Earth-based observations (including those from Hubble) during the MO mission, direct comparisons can be made between the datasets.

Martin, L. J.↗
NASA NTRS1992

Active structural control for damping augmentation and compensation of thermal distortion

A large space-based Focus Mission Interferometer is used as a testbed for the NASA Controls and Structures Interaction Program. Impedance-based adaptive structural control and control of thermal disturbances are demonstrated using an end-to-end simulation of the system's optical performance. Attention is also given to integrated optical/structural modeling and a hierarchical, layered control strategy.

Sirlin, S. W.↗