To the far side of the sun using Venus gravity assist
In this paper, the application will be for the insertion of a Far Side Sentinel (FSS) satellite in the year 2009 into the third quadrant using a double Venus gravity assist.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
In this paper, the application will be for the insertion of a Far Side Sentinel (FSS) satellite in the year 2009 into the third quadrant using a double Venus gravity assist.
This paper describes a knowledge-based system called the Situation Manager that was developed for the Link Monitor and Control Operator Assistant (LMCOA) at the Jet Propulsion Laboratory. This system was developed in response to a number of deficiencies that were identified in an earlier version of the LMCOA: (1) the need to close the control loop between sending a directive and knowing when its execution is complete (versus just closing the communications loop), (2) the need to recognize an anomaly and alert the operator when a directive is rejected or a link device fails, and (3) the need to suggest ways to work around an anomaly, provided that it is recognizable. In response to these needs, the Situation Manager has been designed to provide the LMCOA with three basic capabilities: situation assessment, anomaly diagnosis, and recovery from commonly
A tool that assist surgeons manipulate surgical insturments more precisely than is possible manually was developed. The tool is a telemanipulator that scales down the surgeon's hand motion and filters tremor in the motion.
The influence of the applied loading rate (dK/dt) on the environment-assisted cracking (EAC) behavior of sensitized AA5456-H116 in 0.6 M NaCl at applied potentials ranging from −800 to −900 mV_SCE is assessed via a rising-K testing framework. The applied potential strongly affects the dK/dt-dependence of EAC with results suggesting a minimal influence for potentials more positive than −830 mVSCE and a stronger dK/dt-dependence for potentials more negative than −830 mV_SCE. Crack growth rates measured using rising versus static K testing are compared, which demonstrates that rising K methods consistently yield conservative EAC metrics with increased efficiency.
Humans are frequently left to “backstop” automated systems, and Human Factors specialists have argued against this for decades with, at best, partial success. What if we took a different tack... and designed to support it? The participants were involved in a recent effort to review and document cases across multiple domains where operators acted as a “failsafe” for automation, intervening in unanticipated situations to maximize success and minimize damage. We defined a “Human As Failsafe” (HAF) incident and then investigated conditions and practices making HAF success more or less likely. Analyzing these historical incidents, we suggested remediation approaches. The project also examined the legal concept of culpability (i.e., when intervention should have happened but didn’t) and proposed a state-machine-based analytic simulation to identify when HAF interventions are plausible. The panel objective will be to briefly present these concepts, but more generally to discuss designing for inevitable HAF events. This presentation with review the concept of a HAT Assistant to support multi-vehicle control of drones in a wildland firefighting context.
Overview of Federal Energy Management Program (FEMP) assistance and services available for energy savings performance contract (ESPC) projects.
The U.S. Department of Energy’s (DOE) Weatherization Assistance Program reduces energy costs for low-income households by increasing the energy efficiency of their homes, while ensuring their health and safety.
A fact sheet that provides an overview of FEMP's technical assistance through the Department of Energy's National Laboratories.
AMO’s Industrial Technical Assistance program factsheet
This two-page fact sheet describes Clean Cities' technical assistance (Tiger Teams) capabilities and projects, both completed and ongoing. Tiger Teams are a critical element of the Clean Cities program, providing on-the-ground consultation to help inform program strategies. The knowledge Tiger Team experts gain from these experiences often helps inform other alternative fuels activities, such as needed research, codes and standards revisions, and new training resources.
The Clean Energy Solutions Center, an initiative of the Clean Energy Ministerial, helps countries throughout the world create policies and programs that advance the deployment of clean energy technologies. Through the Solutions Center's no-cost 'Ask an Expert' service, a team of international experts has delivered assistance to countries in all regions of the world. High-impact examples from the Latin American/Caribbean region are featured here.
The Clean Energy Solutions Center, an initiative of the Clean Energy Ministerial, helps countries throughout the world create policies and programs that advance the deployment of clean energy technologies. Through the Solutions Center's no-cost 'Ask an Expert' service, a team of international experts has delivered assistance to countries in all regions of the world. High-impact examples from the Asia/Pacific region are featured here.
The U.S. Department of Energy’s (DOE) Weatherization Assistance Program reduces energy costs for low-income households by increasing the energy e ciency of their homes, while ensuring their health and safety. The Program supports 8,500 jobs and provides weatherization services to approximately 35,000 homes every year using DOE funds.
This fact sheet provides a general overview of the Energy Transitions Initiative Partnership Project (ETIPP). It describes the general purpose of the program, and provides some general examples of technical assistance that could be offered through the program.
As part of WIP, the Partnerships and Technical Assistance Team (P&TA) serves at the nexus of state and local governments to catalyze lead-by-example programs by developing tools and solutions to barriers facing state and local governments; convening and creating peer exchanges to showcase public-sector leadership and effective public-private partnerships; and providing information from leading technical experts.
Conventional extrusion of aluminum alloy 7075 is limited to 1-2 meters per minute in order to avoid surface tearing and cracking. An emerging technique called Shear Assisted Processing and Extrusion (ShAPE) was used to extrude aluminum alloy 7075 tubing at a speed of 7.4 meters per minute without inducing surface defects. The faster extrusion speed is attributed to the unique flow characteristics inherent to the ShAPE process compared to conventional extrusion. Tubes with an inner diameter of 10 mm, outer diameter of 12 mm, and length of 2 meters were extruded at temperatures ranging from 340°C to 466°C. Tensile testing was performed per ASTM B557-15 with strain measured using digital image correlation. An ultimate tensile strength of 565 ± 4.6 MPa, yield strength of 496 ± 8.7 MPa, and elongation of 16.4 ± 1.0 % were measured for extrusion made at 362°C and heat treated to the T6 condition.
This webinar is for prospective applicants (i.e., remote, island, and islanded communities) interested in applying to the U.S. Department of Energy's Energy Transitions Initiative Partnership Program (ETIPP) in spring of 2022. This webinar provides an overview of ETIPP and technical assistance, introduces the ETIPP regional partners, summarizes two ongoing ETIPP projects, discusses the 2022 application process, and closes with a question-and-answer session. This webinar is hosted by the National Renewable Energy Laboratory, which is part of the ETIPP partner network.
This document serves as the final report for NSUF Project 19-16567 (Reference 1) and its supporting contracts (References 2 and 3). It documents completion of testing of specimens fabricated as previously described in Reference 4. At a high level, the purpose of the testing is to generate data to support continued operation of light water reactors (LWR) and provide further understanding of irradiation-assisted stress corrosion crack (IASCC) initiation in baffle-former bolt materials. Baffle-former bolts that had been extracted from commercial pressurized water reactors (PWRs) were machined into miniature 4-point bend specimens and TEM samples at the Westinghouse Churchill Site hot cell facility. These samples were then shipped to the University of Michigan to undergo IASCC initiation testing in simulated PWR primary coolant containing either LiOH or KOH additions. Overall, 15 samples were tested, 8 in water with KOH additions and 7 in water with LiOH additions, until indications of cracking were observed. Crack initiation stress was similar in both water environments at 50-60% of the irradiated yield stress. Post-test examination of the cracking sites, including scanning electron microscopy and transmission electron microscopy, demonstrated that the crack initiation mechanism and crack initiation rates were similar between the two different water chemistries. A grain boundary oxidation and oxide fracture mechanism was observed to be responsible for crack initiation.