Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ACETATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Cooperative Formation of Icosahedral Proline Clusters from Dimers

Ion mobility spectrometry-mass spectrometry and Fourier transform infrared spectroscopy (FTIR) techniques were combined with quantum chemical calculations to examine the origin of icosahedral clusters of the amino acid proline. When enantiopure proline solutions are electrosprayed (using nanospray) from 100 mM ammonium acetate, only three peaks are observed in the mass spectrum across a concentration range of five orders of magnitude: a monomer [Pro+H]{sup +} species, favored from 0.001 to 0.01 mM proline concentrations; a dimer [2Pro+H]{sup +} species, the most abundant species for proline concentrations above 0.01 mM; and, the dimer and dodecamer [12Pro+2H]{sup 2+} for 1.0 mM and more concentrated proline solutions. Electrospraying racemic D/L-proline solutions from 100 mM ammonium acetate leads to a monomer at low proline concentrations (0.001 to 0.1 mM), and a dimer at higher concentrations (>0.09 mM), as well as a very small population of 8 to 15 Pro clusters that comprise <0.1% of the total ion signals even at the highest proline concentration. Solution FTIR studies show unique features that increase in intensity in the enantiopure proline solutions, consistent with clustering, presumably from the icosahedral geometry in bulk solution. When normalized for the total proline, these results are indicative of a cooperative formation of the enantiopure 12Pro species from 2Pro. .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tribological behavior of N-doped ZnO thin films by metal organic chemical vapor deposition under lubricated contacts

N-doped ZnO thin films were deposited on 304L stainless steel through the pyrolysis of zinc acetate and ammonium acetate in different ratios at a temperature of 420 degrees C using metal organic chemical vapor deposition. Compositional and structural analyzes of the films were performed by using Rutherford backscattering spectroscopy and X-ray diffraction. The frictional behavior of the thin films and 304L stainless steel substrate was evaluated using a ball-on-flat configuration with reciprocating sliding under marginally lubricated and fully flooded conditions. Al alloy (2017) was used as ball counterface, while basestock synthetic polyalfaolefin oil (PAO10) without additives was used as lubricant. The flat and ball counterface surfaces were examined to assess the wear dimension and failure mechanism. Under marginally lubricated condition, N-doped ZnO thin films provided significant reduction in friction, whereas the films have minimal or no effect in friction under fully flooded condition. N-doped ZnO thin films showed a significant effect in protecting the ball counterface as wear volume was reduced compared with that of the substrate under the marginally lubricated condition. Under the fully flooded condition, with the exception of one of the films, the wear volume of the N-doped ZnO thin films ball reduced compared with that of the substrate. In all the ball counterfaces for N-doped ZnO thin films under both conditions, wear occurred through abrasive mechanism of various degrees or mild polishing. Thus, superfluous lubrication of N-doped ZnO thin films is not necessary to reduce friction and wear.

36 MATERIALS SCIENCE↗

In situ probing of interfacial roughness and transient phases during ceramic cold sintering process

The ceramic cold sintering process (CSP) offers an eco-friendly approach to producing fully dense ceramics at low temperatures. However, an incomplete mechanistic understanding hinders its optimization and widespread adoption. In this study, we analyze the microstructural and structural changes in ZnO, a model CSP system, using in situ synchrotron-based high-energy small-angle X-ray scattering and X-ray diffraction techniques. Our results reveal the time evolution of ZnO particles' surface area and roughness, reflecting the dissolution and re precipitation processes that enable densification. The in situ measurements supply valuable kinetic data for these stages of CSP. Alongside microstructural changes and densification, we observed the evolution of secondary phases representing reaction products between ZnO and acetic acid, the solvent used. The initial ZnO/solvent mixture's dominant secondary phase is attributed to zinc acetate, which is gradually replaced by a zinc soap-type structure during CSP. This structure has a large (≈ 21 Å) lattice parameter and is assumed to have a layered nature. The formation of this soap phase, which is retained in the sintered product as an intergranular component, appears to be a signature of successful cold sintering as it facilitates mass transport, leading to densification. Here, our study underscores the potential of in situ synchrotron characterization for revealing microstructural and phase-evolution details during CSP. These findings, which would be challenging to obtain through ex situ measurements, provide crucial data to guide and validate theoretical models, ultimately enhancing CSP's effectiveness and adoption.

36 MATERIALS SCIENCE↗

Pore-scale simulation of microbial growth using a genome-scale metabolic model: Implications for Darcy-scale reactive transport

Recent advances in microbiology have enabled the quantitative simulation of microbial metabolism and growth based on genome-scale characterization of metabolic pathways and fluxes. We have incorporated a genome-scale metabolic model of the iron-reducing bacteria Geobacter sulfurreducens into a pore-scale simulation of microbial growth based on coupling of iron reduction to oxidation of a soluble electron donor (acetate). In our model, fluid flow and solute transport is governed by a combination of the Navier-Stokes and advection-diffusion-reaction equations. Microbial growth occurs only on the surface of soil grains where solid-phase mineral iron oxides are available. Mass fluxes of chemical species associated with microbial growth are described by the genome-scale microbial model, implemented using a constraint-based metabolic model, and provide the Robin-type boundary condition for the advection-diffusion equation at soil grain surfaces. Conventional models of microbially-mediated subsurface reactions use a lumped reaction model that does not consider individual microbial reaction pathways, and describe reactions rates using empirically-derived rate formulations such as the Monod-type kinetics. We have used our pore-scale model to explore the relationship between genome-scale metabolic models and Monod-type formulations, and to assess the manifestation of pore-scale variability (microenvironments) in terms of apparent Darcy-scale microbial reaction rates. The genome-scale model predicted lower biomass yield, and different stoichiometry for iron consumption, in comparisonto prior Monod formulations based on energetics considerations. We were able to fit an equivalent Monod model, by modifying the reaction stoichiometry and biomass yield coefficient, that could effectively match results of the genome-scale simulation of microbial behaviors under excess nutrient conditions, but predictions of the fitted Monod model deviated from those of the genome-scale model under conditions in which one or more nutrients were limiting. The fitted Monod kinetic model was also applied at the Darcy scale; that is, to simulate average reaction processes at the scale of the entire pore-scale model domain. As we expected, even under excess nutrient conditions for which the Monod and genome-scale models predicted equal reaction rates at the pore scale, the Monod model over-predicted the rates of biomass growth and iron and acetate utilization when applied at the Darcy scale. This discrepancy is caused by an inherent assumption of perfect mixing over the Darcy-scale domain, which is clearly violated in the pore-scale models. These results help to explain the need to modify the flux constraint parameters in order to match observations in previous applications of the genome-scale model at larger scales. These results also motivate further investigation of quantitative multi-scale relationships between fundamental behavior at the pore scale (where genome-scale models are appropriately applied) and observed behavior at larger scales (where predictions of reactive transport phenomena are needed).

bioremediation↗

Coal fly ash interaction with environmental fluids: Geochemical and strontium isotope results from combined column and batch leaching experiments

The major element and Sr isotope systematics and geochemistry of coal fly ash and its interactions with environmental waters were investigated using laboratory flow-through column leaching experiments (sodium carbonate, acetic acid, nitric acid) and sequential batch leaching experiments (water, acetic acid, hydrochloric acid). Column leaching of Class F fly ash samples shows rapid release of most major elements early in the leaching procedure, suggesting an association of these elements with soluble and surface bound phases. Delayed release of certain elements (e.g., Al, Fe, Si) signals gradual dissolution of more resistant silicate or glass phases as leaching continues. Strontium isotope results from both column and batch leaching experiments show a marked increase in {sup 87}Sr/{sup 86}Sr ratio with continued leaching, yielding a total range of values from 0.7107 to 0.7138. For comparison, the isotopic composition of fluid output from a fly ash impoundment in West Virginia falls in a narrow range around 0.7124. The experimental data suggest the presence of a more resistant, highly radiogenic silicate phase that survives the combustion process and is leached after the more soluble minerals are removed. Strontium isotopic homogenization of minerals in coal does not always occur during the combustion process, despite the high temperatures encountered in the boiler. Early-released Sr tends to be isotopically uniform; thus the Sr isotopic composition of fly ash could be distinguishable from other sources and is a useful tool for quantifying the possible contribution of fly ash leaching to the total dissolved load in natural surface and ground waters.

01 COAL, LIGNITE, AND PEAT↗

Effect of exogenous electron shuttles on growth and fermentative metabolism in Clostridium sp. BC1

In this study, the influence exogenous electron shuttles on the growth and glucose fermentative metabolism of Clostridium sp. BC1 was investigated. Bicarbonate addition to mineral salts (MS) medium accelerated growth and glucose fermentation which shifted acidogenesis (acetic- and butyric-acids) towards solventogenesis (ethanol and butanol). Addition of ferrihydrite, anthraquinone disulfonate, and nicotinamide adenine dinucleotide in bicarbonate to growing culture showed no significant influence on fermentative metabolism. In contrast, methyl viologen (MV) enhanced ethanol- and butanol-production by 28- and 12-fold, respectively with concomitant decrease in hydrogen, acetic- and butyric-acids compared to MS medium. The results show that MV addition affects hydrogenase activity with a significant reduction in hydrogen production and a shift in the direction of electron flow towards enhanced production of ethanol and butanol.

08 HYDROGEN↗

Continuous culture of anaerobic fungi enables growth and metabolic flux tuning without use of genetic tools

Anaerobic gut fungi (AGF) have potential to valorize lignocellulosic biomass owing to their diverse repertoire of carbohydrate-active enzymes (CAZymes). However, AGF metabolism is poorly understood, and no stable genetic tools are available to manipulate growth and metabolic flux to enhance production of specific targets, e.g., cells, CAZymes, or metabolites. Herein, a cost-effective, Arduino-based, continuous-flow anaerobic bioreactor with online optical density control is presented to probe metabolism and predictably tune fluxes in Caecomyces churrovis. Varying the C. churrovis turbidostat setpoint titer reliably controlled growth rate (from 0.04 to 0.20 h −1 ), metabolic flux, and production rates of acetate, formate, lactate, and ethanol. Bioreactor setpoints to maximize production of each product were identified, and all continuous production rates significantly exceed batch rates. Formate spike-ins increased lactate flux and decreased acetate, ethanol, and formate fluxes. The bioreactor and turbidostat culture schemes demonstrated here offer tools to tailor AGF fermentations to application-specific hydrolysate product profiles.

Agriculture↗

Steam reforming of simulated bio-oil on K-Ni-Cu-Mg-Ce-O/Al 2 O 3 : The effect of K

Steam reforming of simulated bio-oil (ethanol, acetone, phenol, and acetic acid) and phenol has been studied on K-Ni-Cu-Mg-Ce-O/Al 2 O 3 composite catalysts. Complementary characterization techniques, such as nitrogen sorption, XRD, H2-TPR, H2-TPD, CO-TPD, CO-DRIFTS, and in situ XPS, were used to correlate surface structure and functionality to catalytic performance of potassium (K) doped catalysts. K doping of the Ni-Cu-Mg-Ce-O/Al 2 O 3 catalyst created a Ni°/Ni 2+ mixed active phase, which not only enhanced steam reforming activity, but also suppressed the methanation reaction. In addition, K doping changed the surface acid-basic properties of the catalyst, which instead favor the water-gas shift reaction. With the combination of these effects, K doping of Ni-Cu-Mg-Ce-O/Al 2 O 3 catalysts led to higher C1 yield and much lower methane formation, favoring hydrogen production in steam reforming of both phenol and simulated bio-oil.

Yu, Ning↗

Low temperature ethanol steam reforming: Selectivity control with lithium doping of Pt/m-ZrO 2

Lithium promoted 2%Pt/m-ZrO 2 catalysts previously observed to exhibit higher rates for the low temperature water-gas shift (LTS) were tested for the ethanol steam reforming with the aim of exploring the potential tuning of the selectivity. Characterization of catalysts having optimized Li content (0.5–0.75%Li) for LTS exhibited (a) weakened C—H bonding of formate, a proposed intermediate in the LTS mechanism, as shown by a shift in the ν(CH) band to lower wavenumbers, (b) a relatively low extent of blocking of Pt, as measured by the ν(CO) band intensity of Pt-CO, (c) increased basicity as measured by CO 2 temperature-programmed desorption with mass spectrometry, but not so high as to strongly inhibit CO 2 product removal, and finally (d) no evidence of electron transfer from Li to Pt. Here, for this study, the same catalysts were tested for ethanol steam reforming (ESR). Results show that Li could likewise weaken the C—C bond of the acetate intermediate, the analog of formate in LTS, and facilitate decarboxylation over decarbonylation altering the selectivity in favor of methanation. This trend was confirmed by fixed bed reaction testing, in-situ infrared spectroscopy experiments of transient ESR, and temperature-programmed ESR using MS. The Li-doped catalysts may be used to pre-reform ethanol prior to feeding to a methane steam reformer to increase the overall H 2 selectivity of the process. DRIFTS of steady state ESR revealed that deactivation occurs through losses in the Pt-support interface, thereby hindering the turnover of the acetate intermediate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Breaking the loop: Tackling homoacetogenesis by chloroform to halt hydrogen production-consumption loop in single chamber microbial electrolysis cells

The presence of homoacetogenesis and hydrogen production-consumption loop significantly hinders the efficient hydrogen recovery in single chamber microbial electrolysis cells (MECs). Furthermore, no effective inhibition method has been proposed against homoacetogens hitherto. In this study, we demonstrated the effectiveness of chloroform as a homoacetogen inhibitor in MECs. In small MECs (320 ml) operated in batch mode, chloroform with concentrations of 0.02% (v/v) and 0.03% (v/v) ceased homoacetogenesis with nonfermentable substrate (acetate), enhancing hydrogen yield and cathodic hydrogen recovery from 21% and 14% to 94% and 90%, respectively. Electrochemical performance was not significantly affected as current density (based on anode surface area) only decreased from 18 A/m 2 to 13 A/m 2 with chloroform concentration increased from 0% (v/v) to 0.03% (v/v). However, when using a fermentable substrate (glucose), the inhibition against homoacetogens by 0.01% (v/v) chloroform led to a significant decrease in current density possibly due to the decreased production of acetate, which reduced the substrate concentration for exoelectrogenesis. Nevertheless, in a larger MEC (10 L), using an immobilized sludge culture and higher glucose concentration (56mM), 0.02% (v/v) chloroform enhanced hydrogen production rate from 0 L/L/D to 4.9 L/L/D and current density from 12-16 A/m 2 to 18-21 A/m 2 . Microbial community analysis revealed that the amount of homoacetogenic Acetobacterium spp. was eliminated in the cathodic biofilms and planktonic cells by chloroform. Future improvement of this method, through reducing the residual chloroform concentration and developing more environment friendly inhibitor using similar mechanisms, may lead to the practical application in MECs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Wet-chemical synthesis of Li7P3S11 with tailored particle size for solid state electrolytes

The small-size solid-state electrodes (SSEs) with high Li+ conductivity play an important role in reducing the interfacial resistance between electrode materials and SSEs and defects between SSEs. As one of the most conductive sulfide based ionic conductors, scalable synthesis of Li7P3S11 with controllable particle sizes is highly desired but rarely reported. Here, we report a facile wet-chemical synthesis method to prepare Li7P3S11 SSEs with variable sizes for all-solid-state lithium batteries (ASSLBs). By fully dissolving 70Li2S-30P2S5 precursors in ethyl acetate solution, the particle size of Li7P3S11 can be manipulated into as small as ~110 nm and high Li+ conductivity of 1.05 mS cm-1 can be achieved. A systematical mechanistic study of solvent effects suggests that the controlled particle sizes are attributed to the excellent solvability and low binding energy of ethyl acetate solvent toward solutes. Moreover, this generic method can be extended to the facilely synthesis of Li3PS4 nanoparticles with an average size of ~200 nm and high Li+ conductivity of 0.1 mS cm-1.

Zhou, Jianbin↗

Biomass pretreatment with distillable ionic liquids for an effective recycling and recovery approach

Ionic liquid (IL) pretreatment methods show incredible promise for the efficient conversion of lignocellulosic feedstocks to fuels and chemicals. Given their low vapor pressures, distillation-based methods of extracting ionic liquids out of biomass post-pretreatment have historically been ignored in favor of alternative methods. We demonstrate a process to distill four acetate-based ionic liquids ([EthA][OAc], [PropA][OAc], [MAEthA][OAc], and [DMAEthA][OAc]) at low pressure and high purity that overcome some disadvantages of “water washing” and “one pot” recovery methods. Out of four tested ILs, ethanolamine acetate ([EthA][OAc]) is shown to have the most agreeable conversion metrics for commercial bioconversion processes achieving 73.6% and 51.4% of theoretical glucose and xylose yields respectively and >85 % recovery rates. Our process metrics are factored into a techno-economic analysis where [EthA][OAc] distillation is compared to other recovery methods as well as ethanolamine pretreatment at both milliliter and liter scales. In conclusion, although our TEA shows [EthA][OAc] distillation underperforming against other processes, we show a step-by-step avenue to reduce sugar production cost below the wholesale dextrose price at scale.

09 BIOMASS FUELS↗

Use of carbon stable isotopes to monitor biostimulation and electron donor fate in chromium-contaminated groundwater

Hexavalent chromium Cr(VI) is a common inorganic contaminant in industrial areas and represents a serious threat to human health due its toxicity. Here we report experimental results from a field-scale investigation of Cr(VI) bio-immobilization at Hanford 100H reservation, a U.S Department of Energy facility (Washington State, USA). Microbial Cr(VI) reduction was stimulated via injection of a 13 C-labeled sodium lactate solution into the high-permeability aquifer consisting of gravel and coarse sand sediments. Concentrations and carbon isotope ratios of metabolites, including dissolved inorganic carbon and total organic carbon, and compound-specific analysis of acetate and propionate, together with phospholipid fatty acids (biomass) have been analyzed to help provide an understanding of the predominant redox processes accompanying Cr(VI) reduction. Results of our study indicate that the injection of an electron donor caused a sharp decrease of Cr(VI) concentration from ~ 32 to ~ 10 nM. Cr(VI) reduction was associated with a decrease in the concentration of carboxylic acids, such as lactate (~ 6 mM to undetectable), propionate (~ 9 mM to undetectable), and acetate (~ 6 mM to undetectable), as well as dissolved inorganic carbon (30 to 10 mM C). Carbon isotope data indicate carbon transfers from the original substrate to organic byproducts and mineralized carbon. Concentrations of metabolites and stable isotope data as well as carbon isotope mass balance calculations were used to monitor biologically mediated reduction of Cr(VI).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Leaching Behavior of Rare Earth Elements in Fort Union Lignite Coals of North America

Rare earth elements are crucial materials in an incredible array of consumer goods, energy system components and military defense applications. However, the global production and entire value chain for rare earth elements is dominated by China, with the U.S. currently 100% import reliant for these critical materials. Traditional mineral ores including those previously mined in the U.S., however, have several challenges. Chief among these is that the content of the most critical and valuable of the rare earths are deficient, making mining uneconomical. Further, the supply of these most critical rare earths is nearly 100% produced in China from a single resource that is only projected to last another 10 to 20 years. The U.S. currently considers the rare earths market an issue of national security. It is imperative that alternative domestic sources of rare earths be identified and methods developed to produce them. Recently, coal and coal byproducts have been identified as one of these promising alternative resources. This paper details the results of a study on characterization of North Dakota lignite and lignite-related feedstocks as an assessment of their feasibility for rare earth element recovery. The abundance, distribution and modes of occurrence of the rare earth elements in the samples collected were determined in this initial study to inform the selection of appropriate extraction and concentration methods to recover the rare earth elements. Materials investigated include the lignite coals, clay-rich sediments associated with the coal seams, and materials associated with a lignite beneficiation system and power plant. The results show that high rare earth element levels exist both in lignite coals and associated sediments. The form of the rare earth elements in the clay materials is primarily as ultra-fine mineral grains. In the lignite coals, approximately 80-95% of the rare earths content is organically associated, primarily as coordination complexes.

Laudal, Daniel A.↗