Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “variable importance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

On the Importance of Using Event-Specific Wave Diffusion Rates in Modeling Diffuse Electron Precipitation

A few to tens of keV electron precipitation that carries substantial energy source down to the upper atmosphere to create aurora is manifested as an important magnetosphere-ionosphere coupling process. The precipitation is usually caused by scattering processes associated with plasma waves in the magnetosphere. The scattering process is often quantified by wave diffusion rates that indicate how fast an electron is scattered. Global models commonly use diffusion coefficients that are derived from statistical wave models. However, due to the statistical nature, many localized, transient features could be smeared out. In this study, we investigate electron precipitation using event-specific diffusion coefficients that are obtained based on simultaneous in-situ measured/inferred, rather than statistical, chorus wave dynamics. We find that the application of the event-specific diffusion coefficients associated with a more dynamic and intense chorus wave model leads more electrons, particularly at several to tens of keV in the dawn-to-noon sector at L > 3, to precipitate than using statistical coefficients. Here, the new simulation roughly captures both the intensity and variability of the precipitating flux as detected by the NOAA/POES satellites. Ionospheric electron density in the lower E region (100–120 km) observed by the mid-latitude Millstone Hill radar is also much better reproduced, while the case using statistical diffusion coefficients underestimates the ionization rate. This study implies the importance of using event-specific diffusion rates in simulating the diffuse electron precipitation and understanding the magnetosphere-ionosphere coupling.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Objective and algorithm considerations when optimizing the number and placement of turbines in a wind power plant

Abstract. Optimizing turbine layout is a challenging problem that has been extensively researched in the literature. However, optimizing the number of turbines within a given boundary has not been studied as extensively and is a difficult problem because it introduces discrete design variables and a discontinuous design space. An essential step in performing wind power plant layout optimization is to define the objective function, or value, that is used to express what is valuable to a wind power plant developer, such as annual energy production, cost of energy, or profit. In this paper, we demonstrate the importance of selecting the appropriate objective function when optimizing a wind power plant in a land-constrained site. We optimized several different wind power plants with different wind resources and boundary sizes. Results show that the optimal number of turbines varies drastically depending on the objective function. For a simple, one-dimensional, land-based scenario, we found that a wind power plant optimized for minimal cost of energy produced just 72 % of the profit compared to the wind power plant optimized for maximum profit, which corresponded to a loss of about USD 2 million each year. This paper also compares the performance of several different optimization algorithms, including a novel repeated-sweep algorithm that we developed. We found that the performance of each algorithm depended on the number of design variables in the problem as well as the objective function.

17 WIND ENERGY↗
DOE OSTI2026

Modeling the Potential Impact of Storage on the US Power Sector in a Multisector Dynamic Context

The electric power sector is expected to grow in size, importance, and complexity around the world as economies expand and electric supply technologies and demand patterns evolve in significant ways. At the same time the electric power sector may see substantial increases in VRE generating technologies which can add variability and uncertainty to the diurnal and seasonal profile of electric supply. With these forces in play, the emergence of modular, flexible electricity storage technologies may have profound impacts on the operation of electric power systems. Here we reduce a storage modeling gap in MSD models by incorporating grid-based electricity storage into the electric sector dynamics of the Global Change Analysis Model-USA (GCAM-USA) with improved power sector representation. We find a potentially significant role for storage technologies in the future of the U.S. power system, with storage capacity ranging from 7.7 to 14.7 GW in 2050 and 13.9 to 31.6 GW in 2100 across several techno-economic scenarios. We also find that storage can help to smooth variability in residual load arising from evolving electricity demands and the introduction of high shares of VRE to the electric grid. This reduces reliance on high-cost peaking generators, improves system-wide capacity factors, and limits curtailment of VRE.

Patel, Pralit L.↗
DOE OSTI2023

Multi-site evaluation of stratified and balanced sampling of soil organic carbon stocks in agricultural fields

Estimating soil organic carbon (SOC) stocks in agricultural fields is essential for environmental and agronomic research, management, and policy. Stratified sampling is a classic strategy for estimating mean soil properties, and has recently been codified in SOC monitoring protocols. However, for the specific task of estimating the SOC stock of an agricultural field, concrete guidance is needed for which covariates to stratify on and how much stratification can improve estimation efficiency. It is also unknown how stratified sampling of SOC stocks compares to modern alternatives, notably doubly balanced sampling. To address these gaps, we collected high-density (average of 7 samples ha -1 ) and deep (average of 75 cm) measurements of SOC stocks at eight commercial fields under maize-soybean production in two US Midwestern states. We combined these measurements with a Bayesian geostatistical model to evaluate stratified and balanced sampling strategies that use a set of readily-available geographic, topographic, spectroscopic, and soil survey data. We examined the number of samples needed to achieve a given level of SOC stock estimation accuracy. While stratified sampling using these variables enables an average sample size reduction of 17% (95% CI, 11% to 23%) compared to simple random sampling, doubly balanced sampling is consistently more efficient, reducing sample sizes by 32% (95% CI, 25% to 37%). The data most important to these efficiency gains are a remotely-sensed SOC index, SSURGO estimates of SOC stocks, and the topographic wetness index. We conclude that in order to meet the urgent challenge of climate change, SOC stocks in agricultural fields could be more efficiently estimated by taking advantage of this readily-available data, especially with doubly balanced sampling.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Thermal and solubility effects on fault leakage during geologic carbon storage

Geologic carbon storage (GCS) is a promising method for reducing anthropogenic CO 2 emissions to the atmosphere. To safely deploy GCS in the field, it is necessary to assess risks and the effect of uncertainty on safe storage. The effect of uncertainty can be quantified using batches of simulations, but the high computational costs of high-resolution simulations necessitate use of reduced-order models (ROMs). Previous work involves ROMs for quantifying the risk of different potential leakage paths from storage reservoirs to shallow formations. However, previous studies on development of fault-leakage ROMs have limited numbers of uncertain parameters and do not explicitly examine impacts of CO 2 solubility and thermal stresses on fault reactivation, which can generate high-permeability pathways and compromise CO 2 storage. Here, we analyze an ensemble of simulations considering CO 2 leakage from a storage reservoir to a shallow aquifer through a fault while varying a number of uncertain parameters related to thermo-hydro-mechanical properties and CO 2 injection. We show the effects of solubility on: free-phase CO 2 -leakage rates, brine-leakage rates, and poroelastic fault destabilization. We find that CO 2 solubility is more important for estimating free-phase CO 2 -leakage rates compared to brine-leakage rates or poroelastic fault destabilization. We also find that thermal stresses and overpressures have different spatial distributions within the fault, indicating that the spatial variability of overpressures due to variation in flow parameters does not necessarily make the spatial variability of thermal stresses negligible. We suggest the use of the CO 2 phase-change path as a variable in future fault-leakage ROMs.

03 NATURAL GAS↗
DOE OSTI2020

Costs of mitigating the environmental impacts of hydropower projects in the United States

Developers are required to mitigate the environmental impacts of hydropower projects in the United States (U.S.) but there is very little accessible information on the associated costs. This work compiles and analyses a dataset of environmental impacts mitigation costs for 182 hydropower projects based on documents obtained from the U.S. Federal Energy Regulatory Commission (FERC). The analysis shows that environmental costs vary wildly across hydropower project classes and mitigation measures, even when normalized by plant capacity. Capital costs per kilowatt are generally higher for relicensed conventional hydropower plants, and lower for new and relicensed pumped storage hydropower plants, relative to other project classes. Smaller plants tend to spend a higher share of total project costs on mitigating environmental impacts than larger plants, and measures related to Aquatic Species, Project Operations, and Recreation have the highest capital cost per kilowatt. These findings mean that environmental costs could become a key decision variable for new hydropower developments in the U.S. due to the small scale of most of the remaining potential and the increasing stringency of environmental requirements. Therefore, technologies to reduce the environmental impacts and costs of hydropower would be important for future project developments.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Improving CLM5.0 Biomass and Carbon Exchange Across the Western United States Using a Data Assimilation System

The Western United States is dominated by natural lands that play a critical role for carbon balance, water quality, and timber reserves. This region is also particularly vulnerable to forest mortality from drought, insect attack, and wildfires, thus requiring constant monitoring to assess ecosystem health. Carbon monitoring techniques are challenged by the complex mountainous terrain, thus there is an opportunity for data assimilation systems that combine land surface models and satellite-derived observations to provide improved carbon monitoring. Here, we use the Data Assimilation Research Testbed to adjust the Community Land Model (CLM5.0) with remotely sensed observations of leaf area and above-ground biomass. The adjusted simulation significantly reduced the above-ground biomass and leaf area, leading to a reduction in both photosynthesis and respiration fluxes. The reduction in the carbon fluxes mostly offset, thus both the adjusted and free simulation projected a weak carbon sink to the land. This result differed from a separate observation-constrained model (FLUXCOM) that projected strong carbon uptake to the land. Simulation diagnostics suggested water limitation had an important influence upon the magnitude and spatial pattern of carbon uptake through photosynthesis. We recommend that additional observations important for water cycling (e.g., snow water equivalent, land surface temperature) be included to improve the veracity of the spatial pattern in carbon uptake. Furthermore, the assimilation system should be enhanced to maximize the number of the simulated state variables that are adjusted, especially those related to the recommended observed quantities including water cycling and soil carbon.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

A Comprehensive Stress Drop Map From Trench to Depth in the Northern Chilean Subduction Zone

We compute stress drops for earthquakes in Northern Chile recorded between 2007 and 2021. By applying two analysis techniques, (a) the spectral ratio (SR) method and (b) the spectral decomposition (SDC) method, a stress drop map for the subduction zone consisting of 51,510 stress drop values is produced. We build an extended set of empirical Green’s functions (EGF) for the SR method by systematic template matching. Outputs are used to compare with results from the SDC approach, where we apply cell-wise obtained global EGF's to compensate for the structural heterogeneity of the subduction zone. We find a good consistency of results of the two methods. The increased spatial coverage and quantity of stress drop estimates from the SDC method facilitate a consistent stress drop mapping of the different seismotectonic domains. Albeit only small differences of median stress drop, strike-perpendicular depth sections clearly reveal systematic variations, with earthquakes at different seismotectonic locations exhibiting distinct values. In particular, interface seismicity is characterized by the lowest observed median value, whereas upper plate earthquakes show noticeably higher stress drop values. Intermediate depth earthquakes show comparatively high average stress drop and a rather strong depth-dependent increase of median stress drop. Additionally, we observe spatio-temporal variability of stress drops related to the occurrence of the two megathrust earthquakes in the study region. The presented study is the first coherent large scale 3D stress drop mapping of the Northern Chilean subduction zone. It provides an important component for further detailed analysis of the physics of earthquake ruptures.

58 GEOSCIENCES↗
DOE OSTI2024

Comparing Gravity Waves in a Kilometer‐Scale Run of the IFS to AIRS Satellite Observations and ERA5

Abstract Atmospheric gravity waves (GWs) impact the circulation and variability of the atmosphere. Sub‐grid scale GWs, which are too small to be resolved, are parameterized in weather and climate models. However, some models are now available at resolutions at which these waves become resolved and it is important to test whether these models do this correctly. In this study, a GW resolving run of the European Center for Medium‐Range Weather Forecasts (ECMWF) Integrated Forecasting System (IFS), run with a 1.4 km average grid spacing (TCo7999 resolution), is compared to observations from the Atmospheric Infrared Sounder (AIRS) instrument, on NASA's Aqua satellite, to test how well the model resolves GWs that AIRS can observe. In this analysis, nighttime data are used from the first 10 days of November 2018 over part of Asia and surrounding regions. The IFS run is resampled with AIRS's observational filter using two different methods for comparison. The ECMWF ERA5 reanalysis is also resampled as AIRS, to allow for comparison of how the high resolution IFS run resolves GWs compared to a lower resolution model that uses GW drag parametrizations. Wave properties are found in AIRS and the resampled models using a multi‐dimensional S‐Transform method. Orographic GWs can be seen in similar locations at similar times in all three data sets. However, wave amplitudes and momentum fluxes in the resampled IFS run are found to be significantly lower than in the observations. This could be a result of horizontal and vertical wavelengths in the IFS run being underestimated.

Meteorology & Atmospheric Sciences↗
DOE OSTI2023

On the dual advantage of placing observations through forward sensitivity analysis

The four-dimensional variational data assimilation methodology for assimilating noisy observations into a deterministic model has been the workhorse in forecasting centres for over three decades. While this method provides a computationally efficient framework for dynamic data assimilation, it is largely silent on the important question concerning the minimum number and placement of observations. To answer this question, we demonstrate the dual advantage of placing the observations where the square of the sensitivity of the model solution with respect to the unknown control variables, called forward sensitivities, attains its maximum. By following this approach, we can force the observability Gramian to be of full rank, which in turn guarantees efficient recovery of the optimal values of the control variables, which is the first of the two advantages of this strategy. We further show that the proposed strategy of placing observations has another inherent optimality: the square of the sensitivity of the optimal estimates of the control with respect to the observations (used to obtain these estimates) attains its minimum value, a second advantage that is a direct consequence of the above strategy for placing observations. Our analytical framework and numerical experiments on linear and nonlinear systems confirm the effectiveness of our proposed strategy.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Identifying Hydrometeorological Factors Influencing Reservoir Releases Using Machine Learning Methods

Simulation of reservoir releases plays a critical role in social-economic functioning and our nation's security. How-ever, it is challenging to predict the reservoir release accurately because of many influential factors from natural environments and engineering controls such as the reservoir inflow and storage. Moreover, climate change and hydrological intensification causing the extreme precipitation and temperature make the accurate prediction of reservoir releases even more challenging. Machine learning (ML) methods have shown some successful applications in simulating reservoir releases. However, previous studies mainly used inflow and storage data as inputs and only considered their short-term influences (e.g, previous one or two days). In this work, we use long short-term memory (LSTM) networks for reservoir release prediction based on four input variables including inflow, storage, precipitation, and temperature and consider their long-term influences. We apply the LSTM model to 30 reservoirs in Upper Colorado River Basin, United States. We analyze the prediction performance using six statistical metrics. More importantly, we investigate the influence of the input hydrometeorological factors, as well as their temporal effects on reservoir release decisions. Results indicate that inflow and storage are the most influential factors but the inclusion of precipitation and temperature can further improve the prediction of release especially in low flows. Additionally, the inflow and storage have a relatively long-term effect on the release. These findings can help optimize the water resources management in the reservoirs.

Fan, Ming↗
DOE OSTI2020

Ultra-clean and smoky marine boundary layers frequently occur in the same season over the southeast Atlantic

We study 41 d with daily median surface accumulation mode aerosol particle concentrations below 50 cm -3 (ultra-clean conditions) observed at Ascension Island (ASI; 7.9° S, 14.4° W) between June 2016 and October 2017 as part of the Layered Atlantic Smoke Interactions with Clouds (LASIC) campaign. Interestingly, these days occur during a period of great relevance for aerosol–cloud–radiation interactions, the southeast Atlantic (SEATL)biomass-burning season (approximately June–October). That means that these critical months can feature both the highest surface aerosol numbers, from smoke intrusion into the marine boundary layer, as well as the lowest. While carbon monoxide and refractory black carbon concentrations on ultra-clean days do not approach those on days with heavy smoke, they also frequently exceed background concentrations calculated in the non-burning season from December 2016 to April 2017. This is evidence that even what become ultra-clean boundary layers can make contact with and entrain from an overlying SEATL smoke layer before undergoing a process of rapid aerosol removal. Because many ultra-clean and polluted boundary layers observed at Ascension Island during the biomass burning season follow similar isobaric back trajectories, the variability in this entrainment is likely more closely tied to the variability in the overlying smoke rather than large-scale horizontal circulation through the boundary layer. Since exceptionally low accumulation mode aerosol numbers at ASI do not necessarily indicate the relative lack of other trace pollutants, this suggests the importance of regional variations in what constitutes an “ultra-clean” marine boundary layer. Finally, surface drizzle rates, frequencies and accumulation – as well as retrievals of liquid water path– all consistently tend toward higher values on ultra-clean days. This implicates enhanced coalescence scavenging in low clouds as the key driver of ultra-clean events in the southeast Atlantic marine boundary layer. These enhancements occur against and are likely mediated by the backdrop of a seasonal increase in daily mean cloud fraction and daily median liquid water path over ASI, peaking in September and October in both LASIC years. Therefore the seasonality in ultra-clean day occurrence seems directly linked to the seasonality in SEATL cloud properties. These results highlight the importance of two-way aerosol–cloud interactions in the region.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

First Report and Molecular Variability of Belonolaimus longicaudatus Associated with Turfgrass in Maryland

Abstract Turfgrass is a crop used extensively in athletic fields and golf courses in Maryland. A soil sample collected in July 2023 from an athletic field in Baltimore County, Maryland, part of a turfgrass nematode survey, containedBelonolaimus longicaudatus. In the southeastern United States,B. longicaudatusis an economically important pathogen of warm season turfgrass. The density was four individuals/100 cm 3 of soil, and no visual symptoms were observed in the bermudagrass field. Morphological features and morphometrics of males and females were consistent withB. longicaudatusand placed the Maryland population in a subclade that was geographically represented by populations from north and west Florida, Texas, and South Carolina. Sequencing of the internal transcribed spacer region ITS1 and ITS2 and 28S large ribosomal subunit D2-23 expansion region confirmed the species' identity. Phylogenetic trees and parsimony network analysis placed the Maryland isolate in a large grouping ofB. longicaudatuspopulations including those from Alabama, Delaware, Florida, Indiana, Mississippi, South Carolina, and Texas. To our knowledge, this is the first report ofB. longicaudatusin Maryland.

Zoology↗
DOE OSTI2023

A Gradient Based Subgrid-Scale Parameterization for Ocean Mesoscale Eddies

Mesoscale eddies play an important role in transport of heat and biogeochemical tracers in the global ocean circulation. Resolving these energetic eddies, however, is challenging in ocean general circulation models (OGCM) because it requires a horizontal grid spacing of ≲1/8° that is computationally expensive. As a result, we are required to parameterize mesoscale eddy effects on large-scale ocean flows. In this work, we introduce a new subgrid-scale (SGS) model that is developed based on a Taylor series expansion of resolved variables to parameterize subgrid mesoscale eddy transports and momentum fluxes in OGCM. We have performed an a priori study to evaluate the performance of our new gradient model using high-resolution ocean simulations. Our results show that the gradient model well predicts the actual SGS thickness fluxes in the zonal and meridional directions in coarse-resolution simulations with the grid spacing ≳1/4°. The unresolved kinetic energy at the ocean surface is also skillfully estimated. More importantly, unlike current mesoscale eddy parameterizations, which are mainly developed based on an assumption of flat bottom ocean, our new SGS model can capture the structure of unresolved standing meanders at the ocean surface. We have also developed a dynamic procedure for setting in non-dimensional parameters in our new parameterization through a non-ad hoc and tuning-free method. Overall, this work suggests that implementing the gradient model in OGCM can improve the model accuracy with an affordable computational cost in eddy-permitting and non-eddying simulations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Estimation of the Surface Fluxes for Heat and Momentum in Unstable Conditions with Machine Learning and Similarity Approaches for the LAFE Data Set

Abstract Measurements of three flux towers operated during the land atmosphere feedback experiment (LAFE) are used to investigate relationships between surface fluxes and variables of the land–atmosphere system. We study these relations by means of two machine learning (ML) techniques: multilayer perceptrons (MLP) and extreme gradient boosting (XGB). We compare their flux derivation performance with Monin–Obukhov similarity theory (MOST) and a similarity relationship using the bulk Richardson number (BRN). The ML approaches outperform MOST and BRN. Best agreement with the observations is achieved for the friction velocity. For the sensible heat flux and even more so for the latent heat flux, MOST and BRN deviate from the observations while MLP and XGB yield more accurate predictions. Using MOST and BRN for latent heat flux, the root mean square errors (RMSE) are 107 Wm $$^{-2}$$ - 2 and 121 Wm $$^{-2}$$ - 2 , respectively, as well as the intercepts of the regression lines are $$\approx 110$$ ≈ 110 Wm $$^{-2}$$ - 2 . For the ML methods, the RMSEs reduce to 31 Wm $$^{-2}$$ - 2 for MLP and 33 Wm $$^{-2}$$ - 2 for XGB as well as the intercepts to just 4 Wm $$^{-2}$$ - 2 for MLP and $$-1$$ - 1 Wm $$^{-2}$$ - 2 for XGB with slopes of the regression lines close to 1, respectively. These results indicate significant deficiencies of MOST and BRN, particularly for the derivation of the latent heat flux. In fact, in contrast to the established theories, feature importance weighting demonstrates that the ML methods base their improved derivations on net radiation, the incoming and outgoing shortwave radiations, the air temperature gradient, and the available water contents, but not on the water vapor gradient. The results imply that further studies of surface fluxes and other turbulent variables with ML techniques provide great promise for deriving advanced flux parameterizations and their implementation in land–atmosphere system models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Understanding How Ligand Functionalization Influences CO2 and N2 Adsorption in a Sodalite Metal–Organic Framework

In this work, a detailed study is conducted to understand how ligand substitution influences the CO2 and N2 adsorption properties of two highly crystalline sodalite metal–organic frameworks (MOFs) known as Cu–BTT (BTT–3 = 1,3,5-benzenetristetrazolate) and Cu–BTTri (BTTri–3 = 1,3,5-benzenetristriazolate). The enthalpy of adsorption and observed adsorption capacities at a given pressure are significantly lower for Cu–BTTri compared to its tetrazole counterpart, Cu–BTT. In situ X-ray and neutron diffraction, which allow visualization of the CO2 and N2 binding sites on the internal surface of Cu–BTTri, provide insights into understanding the subtle differences. As expected, slightly elongated distances between the open Cu2+ sites and surface-bound CO2 in Cu–BTTri can be explained by the fact that the triazolate ligand is a better electron donor than the tetrazolate. The more pronounced Jahn–Teller effect in Cu–BTTri leads to weaker guest binding. The results of the aforementioned structural analysis were complemented by the prediction of the binding energies at each CO2 and N2 adsorption site by density functional theory calculations. In addition, variable temperature in situ diffraction measurements shed light on the fine structural changes of the framework and CO2 occupancies at different adsorption sites as a function of temperature. Finally, simulated breakthrough curves obtained for both sodalite MOFs demonstrate the materials’ potential performance in dry postcombustion CO2 capture. The simulation, which considers both framework uptake capacity and selectivity, predicts better separation performance for Cu–BTT. The information obtained in this work highlights how ligand substitution can influence adsorption properties and hence provides further insights into the material optimization for important separations.

adsorption capacities↗
DOE OSTI2020

Comparing Cetane Number Measurement Methods

Cetane number is one of the most important fuel performance metrics for mixing controlled compression-ignition “diesel” engines, quantifying a fuel’s propensity for autoignition when injected into end-of-compression-type temperature and pressure conditions. The historical default and referee method on a Cooperative Fuel Research (CFR) engine configured with indirect fuel injection and variable compression ratio is cetane number (CN) rating. A subject fuel is evaluated against primary reference fuel blends, with heptamethylnonane defining a low-reactivity endpoint of CN = 15 and hexadecane defining a high-reactivity endpoint of CN = 100. While the CN scale covers the range from zero (0) to 100, typical testing is in the range of 30 to 65 CN. Alternatively, several constant-volume combustion chamber (CVCC)-based cetane rating devices have been developed to rate fuels with an equivalent derived cetane number (DCN) or indicated cetane number (ICN). These devices measure ignition delay for fuel injected into a fixed volume of high-temperature and high-pressure air to simulate end-of-compression-type conditions. In this study, a range of novel fuel compounds are evaluated across three CVCC methods: the Ignition Quality Tester (IQT), Fuel Ignition Tester (FIT), and Advanced Fuel Ignition Delay Analyzer (AFIDA). Resulting DCNs and ICNs are compared for fuels within the normal diesel fuel range of reactivity, as well as very high (~100) and very low DCNs/ICNs (~5). Distinct differences between results from various devices are discussed. This is important to consider because some new, high-efficiency advanced compression-ignition (CI) engine combustion strategies operate with more kinetically controlled distributed combustion as opposed to mixing controlled diffusion flames. These advanced combustion strategies may benefit from new fuel chemistries, but current rating methods of CN, DCN, and ICN may not fully describe their performance. In addition, recent evidence suggests ignition delay in modern on-road diesel engines with high-pressure common rail fuel injection systems may no longer directly correlate to traditional CN fuel ratings. Simulated end-of-compression conditions are compared for CN, DCN, and ICN and discussed in the context of modern diesel engines to provide additional insight. Results highlight the potential need for revised and/or multiple fuel test conditions to measure fuel performance for advanced CI strategies.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Comparing Global Spray Combustion Characteristics and Local Shot-to-Shot Variations in a Reacting n -Heptane Spray

In support of efforts to develop improved models of turbulent spray behavior and combustion in diesel engines, experimental data and analysis must be obtained for guidance and validation. For Reynolds-averaged Navier–Stokes (RANS)-based Computational fluid dynamics (CFD) modeling approaches, representative ensemble average experimental results are important. For high-fidelity models such as large eddy simulations (LES)-based CFD, precise individual experimental results are desirable. However, making comparisons between a given experiment and LES is a challenge since local parameters cannot be directly compared. In this work, an optically accessible constant pressure flow rig (CPFR) is utilized to acquire diesel-like fuel injection and reaction behavior simultaneously with three optical diagnostic techniques: rainbow Schlieren deflectometry (RSD), OH* chemiluminescence (OH*), and two-color pyrometry (2CP). The CPFR allows a large number of repeated injection experiments to be performed for statistical analysis and convergence using ensemble-averaging techniques, while maintaining highly repeatable test conditions. Even for stable test conditions, variations in local turbulent fuel–air mixing introduce variability, which manifests as significant differences in OH* and 2CP results. Experimental measurements of characteristic parameters including liquid and vapor jet penetration, liftoff length, soot temperature and concentration, and turbulent flame speed, along with the shot-to-shot variability of each dataset, are presented and discussed. Finally, a statistical method is utilized to analyze the extent of this variability, and to identify superlative injections within the dataset for discussion and analysis of shot-to-shot variations.

42 ENGINEERING↗