Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “tool size”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

The importance of SO{sub 2} and SO{sub 3} for sulphation of gaseous KCl - An experimental investigation in a biomass fired CFB boiler

This paper is based on results obtained during co-combustion of wood pellets and straw in a 12 MW circulating fluidised bed (CFB) boiler. Elemental sulphur (S) and ammonium sulphate ((NH{sub 4}){sub 2}SO{sub 4}) were used as additives to convert the alkali chlorides (mainly KCl) to less corrosive alkali sulphates. Their performance was then evaluated using several measurement tools including, IACM (on-line measurements of gaseous alkali chlorides), a low-pressure impactor (particle size distribution and chemical composition of extracted fly ash particles), and deposit probes (chemical composition in deposits collected). The importance of the presence of either SO{sub 2} or SO{sub 3} for gas phase sulphation of KCl is also discussed. Ammonium sulphate performed significantly better than elemental sulphur. A more efficient sulphation of gaseous KCl was achieved with (NH{sub 4}){sub 2}SO{sub 4} even when the S/Cl molar ratio was less than half compared to sulphur. Thus the presence of gaseous SO{sub 3} is of greater importance than that of SO{sub 2} for the sulphation of gaseous KCl. (author)

09 BIOMASS FUELS↗

Microstructure characterization of the stir zone of submerged friction stir processed aluminum alloy 2219

Aluminum alloy 2219-T6 was friction stir processed using a novel submerged processing technique to facilitate cooling. Processing was conducted at a constant tool traverse speed of 200 mm/min and spindle rotation speeds in the range from 600 to 800 rpm. The microstructural characteristics of the base metal and processed zone, including grain structure and precipitation behavior, were studied using optical microscopy (OM), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Microhardness maps were constructed on polished cross sections of as-processed samples. The effect of tool rotation speed on the microstructure and hardness of the stir zone was investigated. The average grain size of the stir zone was much smaller than that of the base metal, but the hardness was also lower due to the formation of equilibrium θ precipitates from the base metal θ′ precipitates. Stir zone hardness was found to decrease with increasing rotation speed (heat input). The effect of processing conditions on strength (hardness) was rationalized based on the competition between grain refinement strengthening and softening due to precipitate overaging. - Highlights: • SZ grain size (∼ 1 μm) is reduced by over one order of magnitude relative to the BM. • Hardness in the SZ is lower than that of the precipitation strengthened BM. • Metastable θ′ in the base metal transforms to equilibrium θ in the stir zone. • Softening in the SZ results from a decrease of precipitation strengthening.

36 MATERIALS SCIENCE↗

Spectral archives: extending spectral libraries to analyze both identified and unidentified spectra.

Tandem mass spectrometry (MS/MS) experiments yield multiple, nearly identical spectra of the same peptide in various laboratories, but proteomics researchers typically do not leverage the unidentified spectra produced in other labs to decode spectra they generate. We propose a spectral archives approach that clusters MS/MS datasets, representing similar spectra by a single consensus spectrum. Spectral archives extend spectral libraries by analyzing both identified and unidentified spectra in the same way and maintaining information about peptide spectra that are common across species and conditions. Thus archives offer both traditional library spectrum similarity-based search capabilities along with new ways to analyze the data. By developing a clustering tool, MS-Cluster, we generated a spectral archive from ~1.18 billion spectra that greatly exceeds the size of existing spectral repositories. We advocate that publicly available data should be organized into spectral archives rather than be analyzed as disparate datasets, as is mostly the case today.

99 GENERAL AND MISCELLANEOUS↗

A new white beam x-ray microdiffraction setup on the BM32 beamline at the European Synchrotron Radiation Facility

A white beam microdiffraction setup has been developed on the bending magnet source BM32 at the European Synchrotron Radiation Facility. The instrument allows routine submicrometer beam diffraction to perform orientation and strain mapping of polycrystalline samples. The setup features large source to optics distances allowing large demagnification ratios and small beam sizes. The optics of the beamline is used for beam conditioning upstream a secondary source, suppressing any possible interference of beam conditioning on beam size and position. The setup has been designed for an easy and efficient operation with position control tools embedded on the sample stage, a high magnification large aperture optical microscope, and fast readout detectors. Switching from the white beam mode to the monochromatic mode is made easy by an automatic procedure and allows the determination of both the deviatoric and hydrostatic strain tensors.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Fast camera studies at an electron cyclotron resonance table plasma generator

A simple table-size ECR plasma generator operates in the ATOMKI without axial magnetic trap and without any particle extraction tool. Radial plasma confinement is ensured by a NdFeB hexapole. The table-top ECR is a simplified version of the 14 GHz ATOMKI-ECRIS. Plasma diagnostics experiments are planned to be performed at this device before installing the measurement setting at the “big” ECRIS. Recently, the plasma generator has been operated in pulsed RF mode in order to investigate the time evolution of the ECR plasma in two different ways. (1) The visible light radiation emitted by the plasma was investigated by the frames of a fast camera images with 1 ms temporal resolution. Since the visible light photographs are in strong correlation with the two-dimensional spatial distribution of the cold electron components of the plasma it can be important to understand better the transient processes just after the breakdown and just after the glow. (2) The time-resolved ion current on a specially shaped electrode was measured simultaneously in order to compare it with the visible light photographs. The response of the plasma was detected by changing some external setting parameters (gas pressure and microwave power) and was described in this paper.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

X-ray fluorescence microscopy methods for biological tissues

Abstract Synchrotron-based X-ray fluorescence microscopy is a flexible tool for identifying the distribution of trace elements in biological specimens across a broad range of sample sizes. The technique is not particularly limited by sample type and can be performed on ancient fossils, fixed or fresh tissue specimens, and in some cases even live tissue and live cells can be studied. The technique can also be expanded to provide chemical specificity to elemental maps, either at individual points of interest in a map or across a large field of view. While virtually any sample type can be characterized with X-ray fluorescence microscopy, common biological sample preparation methods (often borrowed from other fields, such as histology) can lead to unforeseen pitfalls, resulting in altered element distributions and concentrations. A general overview of sample preparation and data-acquisition methods for X-ray fluorescence microscopy is presented, along with outlining the general approach for applying this technique to a new field of investigation for prospective new users. Considerations for improving data acquisition and quality are reviewed as well as the effects of sample preparation, with a particular focus on soft tissues. The effects of common sample pretreatment steps as well as the underlying factors that govern which, and to what extent, specific elements are likely to be altered are reviewed along with common artifacts observed in X-ray fluorescence microscopy data.

Pushie, M. Jake (ORCID:0000000174945427)↗

Integrated Transmission and Distribution Control

Distributed, generation, demand response, distributed storage, smart appliances, electric vehicles and renewable energy resources are expected to play a key part in the transformation of the American power system. Control, coordination and compensation of these smart grid assets are inherently interlinked. Advanced control strategies to warrant large-scale penetration of distributed smart grid assets do not currently exist. While many of the smart grid technologies proposed involve assets being deployed at the distribution level, most of the significant benefits accrue at the transmission level. The development of advanced smart grid simulation tools, such as GridLAB-D, has led to a dramatic improvement in the models of smart grid assets available for design and evaluation of smart grid technology. However, one of the main challenges to quantifying the benefits of smart grid assets at the transmission level is the lack of tools and framework for integrating transmission and distribution technologies into a single simulation environment. Furthermore, given the size and complexity of the distribution system, it is crucial to be able to represent the behavior of distributed smart grid assets using reduced-order controllable models and to analyze their impacts on the bulk power system in terms of stability and reliability.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Tools for Design and Scale-Up of Solar Thermochemical Reactors: Cooperative Research and Development Final Report, CRADA Number CRD-13-00530

NREL will be collaborating with the Participant on a United States - Australia Solar Energy Collaboration (USASEC) Project Number 1-USO034 "Tools for design and scale-up of solar thermochemical reactors." The grant funds for the Participant's 3.5 year project number 1-US034 commencing on 1 February 2013 have been awarded to the Participant by the Australian Renewable Energy Agency and NREL will be collaborating with the Participant during the final 28 months of this project. This project seeks to provide basic knowledge required to design solar thermochemical reactors able to perform the required energy conversions. In several proposed and demonstrated reactors, concentrated sunlight directly irradiates small solid particles suspended in fluid, enabling very high heat transfer rates to the particles which are the sites of chemical reaction. The reactors, therefore, involve the complex and couple dynamics of turbulent, chemically reacting, particle-laden flows and their interaction with concentrating solar radiation. A strong understanding of these coupled interactions will be crucial important in predicting and optimizing the performance of prototype reactors, but this understanding does not yet exist, since they have never been studied in any fundamental way. The project has a assembled an internationally leading team from The University of New South Wales (UNSW) and the University of Adelaide in Australia and the NREL in the United States to address this key gap in available know-how. The project will use U.S. Dept. of Energy (DOE) supercomputers, among the most powerful available worldwide, with cutting-edge software tools to perform first-principles simulations of the relevant interactions. These studies will be combined with detailed laser-based measurements in Australia to provide the first comprehensive databases concerning the governing phenomena in directly irradiated solar-thermochemical reactors. The outcomes will be the basic scientific knowledge, engineering knowhow and modeling tools necessary to design new reactor concepts and then scale up from the laboratory bench to practical size systems.

14 SOLAR ENERGY↗

Scattering from a V-shaped groove in the resonance domain

Radiation scattered from a V-shaped groove in the resonance domain is measured and compared with predictions from a rigorous theory. The calculated scattering is found to accurately predict the number of peaks and the general shape of the observed scattering. Small variations in groove shape are found to alter peak heights noticeably and peak positions slightly. The finite beam size causes unavoidable discrepancies between calculated and measured scattering. The theory of Maystre provides a very good tool for determining the scattering capabilities of different shapes without having to measure them.

White, G. S.↗

Glaciological studies in the central Andes using AIRSAR/TOPSAR

The interaction of climate and topography in mountainous regions is dramatically expressed in the spatial distribution of glaciers and snowcover. Monitoring existing alpine glaciers and snow extent provides insight into the present mountain climate system and how it is changing, while mapping the positions of former glaciers as recorded in landforms such as cirques and moraines provide a record of the large past climate change associated with the last glacial maximum. The Andes are an ideal mountain range in which to study the response of snow and ice to past and present climate change. Their expansive latitudinal extent offers the opportunity to study glaciers in diverse climate settings from the tropical glaciers of Peru and Bolivia to the ice caps and tide-water glaciers of sub-polar Patagonia. SAR has advantages over traditional passive remote sensing instruments for monitoring present snow and ice and differentiating moraine relative ages. The cloud penetrating ability of SAR is indispensable for perennially cloud covered mountains. Snow and ice facies can be distinguished from SAR's response to surface roughness, liquid water content and grain size distribution. The combination of SAR with a coregestered high-resolution DEM (TOPSAR) provides a promising tool for measuring glacier change in three dimensions, thus allowing ice volume change to be measured directly. The change in moraine surface roughness over time enables SAR to differentiate older from younger moraines. Polarimetric SAR data have been used to distinguish snow and ice facies and relatively date moraines. However, both algorithms are still experimental and require ground truth verification. We plan to extend the SAR classification of snow and ice facies and moraine age beyond the ground truth sites to throughout the Cordillera Real to provide a regional view of past and present snow and ice. The high resolution DEM will enhance the SAR moraine dating technique by discriminating relative ages based on moraine slope degradation.

Forster, Richard R.↗

The role and status of Euler solvers in impulsive rotor noise computations

Several recent applications (in the last five years) of Euler solvers in the computation of impulsive noise from rotor blades emphasize their emerging role in complementing other methods and experimental work. In the area of high-speed impulsive noise the use of Euler solvers as research tools has become fairly mature with very favorable comparisons with experimental data, especially in hover. The grid sizes and resulting computational times are reasonable when compared to those required for accurate surface aerodynamics alone. Furthermore, Euler solvers have provided a rich database with the resolution and accuracy needed for input to Kirchhoff and acoustic analogy methods for predicting the far-field noise. On the other hand, the application of Euler solvers to calculate blade-vortex interaction noise is still far from mature. The computational resources required for accurate calculations away from the blade are much larger than for high-speed impulsive noise. Current calculations help improve the basic understanding of the phenomena involved, but to date no comparisons with experiment have been made. Fortunately, the use of coupled Euler solver/Kirchhoff methods seems to offer promise for a robust and efficient technique for predicting both high-speed impulsive noise and blade-vortex interaction noise. Finally, a simple model problem of an isolated vortex interacting with an arbitrarily prescribed pitching airfoil demonstrates the feasibility of using Euler solvers to examine noise reduction techniques. The use of simple aerodynamic quasi-static theory and the computed lift time history as feedback to determine the required pitching motion appears sufficient to significantly dampen the unsteady loading and subsequent acoustics by an order of magnitude within a few blade passages.

Baeder, James D.↗

New far infrared images of bright, nearby, star-forming regions

Broadband imaging in the far infrared is a vital tool for understanding how young stars form, evolve, and interact with their environment. As the sensitivity and size of detector arrays has increased, a richer and more detailed picture has emerged of the nearest and brightest regions of active star formation. We present data on M 17, M 42, and S 106 taken recently on the Kuiper Airborne Observatory with the Yerkes Observatory 60-channel far infrared camera, which has pixel sizes of 17 in. at 60 microns, 27 in. at 100 microns, and 45 in. at 160 and 200 microns. In addition to providing a clearer view of the complex central cores of the regions, the images reveal new details of the structure and heating of ionization fronts and photodissociation zones where radiation form luminous stars interacts with adjacent molecular clouds.

Harper, D. AL, Jr.↗

Making sense from space-time data in laboratory experiments on space plasma processes

A number of visualization techniques are discussed in a laboratory experiment designed to study phenomena that occur in space. Visualization tools are used to design the apparatus, collect data, and make one-, two-, and three-dimensional plots of the results. These tools are an indispensable part of the experiment because the data sets are hundreds of megabytes in size and rapid turnaround is required.

Gekelman, Walter↗

Curation of US Martian Meteorites Collected in Antarctica

To date the ANSMET field team has collected five martian meteorites (see below) in Antarctica and returned them for curation at the Johnson Space Center (JSC) Meteorite Processing Laboratory (MPL). ne meteorites were collected with the clean procedures used by ANSMET in collecting all meteorites: They were handled with JSC-cleaned tools, packaged in clean bags, and shipped frozen to JSC. The five martian meteorites vary significantly in size (12-7942 g) and rock type (basalts, lherzolites, and orthopyroxenite). Detailed descriptions are provided in the Mars Meteorite compendium, which describes classification, curation and research results. A table gives the names, classifications and original and curatorial masses of the martian meteorites. The MPL and measures for contamination control are described.

Lindstrom, M.↗

Technology Challenges in Small UAV Development

Development of highly capable small UAVs present unique challenges for technology protagonists. Size constraints, the desire for ultra low cost and/or disposable platforms, lack of capable design and analysis tools, and unique mission requirements all add to the level of difficulty in creating state-of-the-art small UAVs. This paper presents the results of several small UAV developments, the difficulties encountered, and proposes a list of technology shortfalls that need to be addressed.

Logan, Michael J.↗

Making a Metal-Lined Composite-Overwrapped Pressure Vessel

process has been devised for the fabrication of a pressure vessel that comprises a composite-material (matrix/fiber) shell with a metal liner on its inner surface. The use of the composite material makes it possible for the tank to be strong enough to withstand the anticipated operating pressure and yet weigh less than does an equivalent all-metal tank. The metal liner is used as a barrier against permeation: In the absence of such a barrier, the pressurized gas in the tank could leak by diffusing through the composite-material shell. The figure depicts workpieces at four key stages in the process, which consists of the following steps: 1. A mandrel that defines the size and shape of the pressure vessel is made by either molding or machining a piece of tooling wax. 2. Silver paint is applied to the surface of the mandrel to make it electrically conductive. 3. The ends of the mandrel are fitted with metal bosses. 4. The mandrel is put into a plating bath, wherein the metal liner is electrodeposited. Depending on the applications, the liner metal could be copper, nickel, gold, or an alloy. Typical liner thicknesses range from 1 to 10 mils (0.025 to 0.25 mm). 5. The wax is melted from within, leaving the thin metal liner. 6. A hollow shaft that includes holes and fittings through which the liner can be pressurized is sealed to both ends of the liner. The liner is pressurized to stiffen (and hence stabilize) it for the next step. 7. The pressurized liner is placed in a filament-winding machine, which is then operated to cover the liner with multiple layers of an uncured graphite-fiber/epoxy-matrix or other suitable composite material. 8. The composite-overwrapped liner is cured in an oven. 9. The pressure is relieved and the shaft is removed. The tank is then ready for use. The process as described above accommodates variations: a) The mandrel could be made of a wax that melts at a higher temperature and not removed until the tank is cured in the oven. b) The tank need not be cylindrical or axisymmetric, as long as the filament-winding machine can accommodate the chosen shape. c) Shallow grooves could be formed on the surface of the mandrel to give the liner a bellows-like character for reinforcement and/or to accommodate expansion and contraction.

DeLay, Tom↗

Characterization and Computational Modeling of Minor Phases in Alloy LSHR

The minor phases of powder metallurgy disk superalloy LSHR were studied. Samples were consistently heat treated at three different temperatures for long times to approach equilibrium. Additional heat treatments were also performed for shorter times, to assess minor phase kinetics in non-equilibrium conditions. Minor phases including MC carbides, M23C6 carbides, M3B2 borides, and sigma were identified. Their average sizes and total area fractions were determined. CALPHAD thermodynamics databases and PrecipiCalc(TradeMark), a computational precipitation modeling tool, were employed with Ni-base thermodynamics and diffusion databases to model and simulate the phase microstructural evolution observed in the experiments with an objective to identify the model limitations and the directions of model enhancement.

Jou, Herng-Jeng↗

Synchrotron XRD analysis of irradiated UO{sub 2} fuel at various burn-up

The micro-XRD technique based on synchrotron radiation is a powerful tool to analyze subtle changes in the crystal lattice structure of irradiated nuclear fuels. The micrometric beam size probes a relatively small volume in the samples. This, in turn, can allow studying the evolution of the material with burn-up even at the level of the grain sizes of the fuel. We report here the results obtained by micro-XRD performed at the microXAS beamline of the Swiss Light Source (SLS) on the two end-members of a series of burn-ups, i.e. a fresh non-irradiated UO2 (reference sample) and a 9 cycle sample, plus the first results on 5- and 7 cycle fuels. The use of the micro-beam allows us to follow the extent of grain polygonization as a function of burn-up and in a lower degree of temperature. The microXAS beamline being the only one where series of spent fuel are investigated, the current results presented in this study are of unique value. In earlier work at lower burn-ups and for doped fuel it has been shown that there is a strong difference in polygonization between center and periphery. While for the 9-cycle a complete restructuring could be shown here, the results for the 5- and 7-cycle samples are not fully conclusive. We obtain interesting results for these samples where both center and the periphery regions exhibit a mix of XRD reflexes, indicating various stages of sub-grain formation. Further detail analyses are needed on the basis of the numerous 2D XRD pictures captured to gain a clearer picture.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗