Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “switch”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Two-Level Switches for Advanced Time-Division Multiplexing

Superconducting quantum interference device (SQUID)-based time-division multiplexing (TDM) is a mature and widely implemented technology used to read out transition-edge sensor arrays. As the number of pixels in modern arrays continues to increase, a higher multiplexing factor is required to reduce the number of wires and amplifier channels. Yet, as the multiplexing factor is increased, the number of row-select wires (used to turn on a row of TDM SQUIDs in a two-dimensional configuration) also increases, limiting the reduction in array wires. We introduce a more advanced TDM architecture that enforces multi-level switching between subgroups of pixels. We show that this technique can dramatically reduce the number of required row-select lines. We also present the design, fabrication, and testing of a TDM multiplexer incorporating a two-level switch, which implements a second switch for each group of ten TDM pixels. In this application, a multiplexing factor of 100 can be addressed using ten group-select wiring pairs and ten row-select wiring pairs. We demonstrate multiplexer functionality and present measured operating margins of this new TDM multiplexer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fundamental Frequency Switching Control of Seven-Level Hybrid Cascaded H-bridge Multilevel Inverter

This paper presents a cascaded H-bridge multilevel inverter that can be implemented using only a single dc power source and capacitors. Standard cascaded multilevel inverters require n dc sources for 2n + 1 levels. Without requiring transformers, the scheme proposed here allows the use of a single dc power source (e.g., a battery or a fuel cell stack) with the remaining n-1 dc sources being capacitors, which is referred to as hybrid cascaded H-bridge multilevel inverter (HCMLI) in this paper. It is shown that the inverter can simultaneously maintain the dc voltage level of the capacitors and choose a fundamental frequency switching pattern to produce a nearly sinusoidal output. HCMLI using only a single dc source for each phase is promising for high-power motor drive applications as it significantly decreases the number of required dc power supplies, provides high-quality output power due to its high number of output levels, and results in high conversion efficiency and low thermal stress as it uses a fundamental frequency switching scheme. This paper mainly discusses control of seven-level HCMLI with fundamental frequency switching control and how its modulation index range can be extended using triplen harmonic compensation.

30 DIRECT ENERGY CONVERSION↗

Atomic-Scale Imaging of Polarization Switching in an (Anti-)Ferroelectric Memory Material: Zirconia (ZrO2)

Direct, atomic-scale visualization of polarization switching in a functional, polycrystalline, binary oxide via in-situ high-resolution transmission electron microscopy (HRTEM) biasing is reported for the first time. Antiferroelectric (AFE) ZrO2 was used as the model system, which is important for commercial DRAMs and as emerging NVMs (through work-function engineering). We observed (1) clear shifting and coalescing of domains within a single grain, and (2) dramatic changes of the atomic arrangements and crystalline phases—both at voltages above the critical voltage measured for AFE switching. Similar synergistic in-situ structural-electrical characterization can pave the way to understand and engineer microscopic mechanisms for retention, fatigue, variability, sub-coercive switching and analog states in ferroelectric and AFE-based memory devices.

Lombardo, Sarah↗

Efficacy of fixed filtration for rapid kVp-switching dual energy x-ray systems

Purpose: Dose efficiency of dual kVp imaging can be improved if the two beams are filtered to remove photons in the common part of their spectra, thereby increasing spectral separation. While there are a number of advantages to rapid kVp-switching for dual energy, it may not be feasible to have two different filters for the two spectra. Therefore, the authors are interested in whether a fixed added filter can improve the dose efficiency of kVp-switching dual energy x-ray systems. Methods: The authors hypothesized that a K-edge filter would provide the energy selectivity needed to remove overlap of the spectra and hence increase the precision of material separation at constant dose. Preliminary simulations were done using calcium and water basis materials and 80 and 140 kVp x-ray spectra. Precision of the decomposition was evaluated based on the propagation of the Poisson noise through the decomposition function. Considering availability and cost, the authors chose a commercial Gd{sub 2}O{sub 2}S screen as the filter for their experimental validation. Experiments were conducted on a table-top system using a phantom with various thicknesses of acrylic and copper and 70 and 125 kVp x-ray spectra. The authors kept the phantom exposure roughly constant with and without filtration by adjusting the tube current. The filtered and unfiltered raw data of both low and high energy were decomposed into basis material and the variance of the decomposition for each thickness pair was calculated. To evaluate the filtration performance, the authors measured the ratio of material decomposition variance with and without filtration. Results: Simulation results show that the ideal filter material depends on the object composition and thickness, and ranges across the lanthanide series, with higher atomic number filters being preferred for more attenuating objects. Variance reduction increases with filter thickness, and substantial reductions (40%) can be achieved with a 2× loss in intensity. The authors’ experimental results validate the simulations, yet were overall slightly worse than expectation. For large objects, conventional (non-K-edge) beam hardening filters perform well. Conclusions: This study demonstrates the potential of fixed K-edge filtration to improve the dose efficiency and material decomposition precision for rapid kVp-switching dual energy systems.

61 RADIATION PROTECTION AND DOSIMETRY↗

A reversible single-molecule switch based on activated antiaromaticity

Single-molecule electronic devices provide researchers with an unprecedented ability to relate novel physical phenomena to molecular chemical structures. Typically, conjugated aromatic molecular backbones are relied upon to create electronic devices, where the aromaticity of the building blocks is used to enhance conductivity. We capitalize on the classical physical organic chemistry concept of Hückel antiaromaticity by demonstrating a single-molecule switch that exhibits low conductance in the neutral state and, upon electrochemical oxidation, reversibly switches to an antiaromatic high-conducting structure. We form single-molecule devices using the scanning tunneling microscope–based break-junction technique and observe an on/off ratio of ~70 for a thiophenylidene derivative that switches to an antiaromatic state with 6-4-6-p electrons. Through supporting nuclear magnetic resonance measurements, we show that the doubly oxidized core has antiaromatic character and we use density functional theory calculations to rationalize the origin of the high-conductance state for the oxidized single-molecule junction. Together, our work demonstrates how the concept of antiaromaticity can be exploited to create single-molecule devices that are highly conducting.

36 MATERIALS SCIENCE↗

Thin film design of amorphous hafnium oxide nanocomposites enabling strong interfacial resistive switching uniformity

A design concept of phase-separated amorphous nanocomposite thin films is presented that realizes interfacial resistive switching (RS) in hafnium-oxide-based devices. The films are formed by incorporating an average of 7% Ba into hafnium oxide during pulsed laser deposition at temperatures ≤400°C. The added Ba prevents the films from crystallizing and leads to ~20-nm-thin films consisting of an amorphous HfO x host matrix interspersed with ~2-nm-wide, ~5-to-10-nm-pitch Ba-rich amorphous nanocolumns penetrating approximately two-thirds through the films. This restricts the RS to an interfacial Schottky-like energy barrier whose magnitude is tuned by ionic migration under an applied electric field. Resulting devices achieve stable cycle-to-cycle, device-to-device, and sample-to-sample reproducibility with a measured switching endurance of ≥10 4 cycles for a memory window ≥10 at switching voltages of ±2 V. Each device can be set to multiple intermediate resistance states, which enables synaptic spike-timing–dependent plasticity. The presented concept unlocks additional design variables for RS devices.

36 MATERIALS SCIENCE↗

Ferroelectric FET-based context-switching FPGA enabling dynamic reconfiguration for adaptive deep learning machines

Field programmable gate array (FPGA) is widely used in the acceleration of deep learning applications because of its reconfigurability, flexibility, and fast time-to-market. However, conventional FPGA suffers from the trade-off between chip area and reconfiguration latency, making efficient FPGA accelerations that require switching between multiple configurations still elusive. Here, we propose a ferroelectric field-effect transistor (FeFET)–based context-switching FPGA supporting dynamic reconfiguration to break this trade-off, enabling loading of arbitrary configuration without interrupting the active configuration execution. Leveraging the intrinsic structure and nonvolatility of FeFETs, compact FPGA primitives are proposed and experimentally verified. The evaluation results show our design shows a 63.0%/74.7% reduction in a look-up table (LUT)/connection block (CB) area and 82.7%/53.6% reduction in CB/switch box power consumption with a minimal penalty in the critical path delay (9.6%). Besides, our design yields significant time savings by 78.7 and 20.3% on average for context-switching and dynamic reconfiguration applications, respectively.

97 MATHEMATICS AND COMPUTING↗

Two TonB-dependent transporters in Methylosinus trichosporium OB3b are responsible for uptake of different forms of methanobactin and are involved in the canonical ‘copper switch’

Copper is an important component of methanotrophic physiology as it controls the expression and activity of alternative forms of methane monooxygenase (MMO). To collect copper, some methanotrophs secrete a chalkophore or copper-binding compound called methanobactin (MB). MB is a ribosomally synthesized post-translationally modified polypeptide (RiPP) that, after binding copper, is collected by MbnT, a TonB-dependent transporter (TBDT). Structurally different forms of MB have been characterized, and here we show that different forms of MB are collected by specific TBDTs. Further, we report that in the model methanotroph, Methylosinus trichosporium OB3b, expression of the TBDT required for uptake of a different MB made by Methylocystis sp. strain SB2 (MB-SB2), is induced in the presence of MB-SB2, suggesting that methanotrophs have developed specific machinery and regulatory systems to actively take up MB from other methanotrophs for copper collection. Moreover, the canonical “copper-switch” in Ms. trichosporium OB3b that controls expression of alternative MMOs is apparent if one of the two TBDTs required for MB-OB3b and MB-SB2 uptake is knocked out, but is disrupted if both TBDTs are knocked out. Furthermore, these data indicate that MB uptake, including the uptake of exogenous MB, plays an important role in the copper switch in M. trichosporium OB3b and thus overall activity. Based on these data, we propose a revised model for the “copper-switch” in this methanotroph that involves MB uptake.

54 ENVIRONMENTAL SCIENCES↗

CsrA-mediated regulation of a virulence switch in Acinetobacter baumannii

CsrA is an RNA binding protein that functions as a global regulator in bacteria. We demonstrate that, in Acinetobacter baumannii, CsrA acts as a positive regulator of the switch from virulent (VIR-O) to avirulent (AV-T) subpopulations. This regulation is mediated, in part, by CsrA interfering with Rho-dependent termination in the mRNA leader region of the ABUW_1645 gene, encoding the primary TetR-type transcriptional regulator that drives cells from the VIR-O to the AV-T state. We demonstrate that CsrA directly binds to the ABUW_1645 mRNA leader region and interferes with Rho binding. We identify three small RNAs (sRNAs) designated CsrB, CsrC, and CsrD that bind to CsrA and inhibit its activity. Individual overexpression of each sRNA greatly decreased the rate of VIR-O to AV-T switching. Individual deletions of each sRNA increased the frequency of VIR-O to AV-T switching, with loss of CsrB giving the highest increase at 2.4-fold. The expression of each sRNA was strongly dependent on the GacA response regulator and the expression of each sRNA was higher in VIR-O cells than in AV-T variants. Furthermore, this regulation provides a mechanism for the differential control of CsrA activity between VIR-O and AV-T variants.

59 BASIC BIOLOGICAL SCIENCES↗

Analysis of polarization switching in ferroelectric crystals in the injection mode

We report on the results of experiments on polarization switching in a ferroelectric TGS crystal during injection of electron beams from a scanning electron microscope under a surface layer. A series of models reflecting the polarization switching dynamics of a ferroelectric crystal under the action of an injected charge is constructed. The implementation of these models is based on the principles of evolution of domain structures taking into account analysis of possible polarization switching mechanisms for ferroelectric samples. A mathematical model developed using these principles demonstrates qualitative similarity of model current pulses and those obtained experimentally in the injection mode.

36 MATERIALS SCIENCE↗

Effective Velocity of the State Switching Front in a Quasi-One-Dimensional Nanosystem upon Multiple New-Phase Domain Formation

The kinetics of state switching fronts plays an important role in controlling nanodevices and the properties of many quasi-one-dimensional objects in physics, chemistry, and biology. In active media, this process is accompanied by the interaction of the state switching front with excitations in the bulk of the material. The propagation of the metastable-state switching front from the sample boundary with the absorption of spontaneously forming new-phase domains in the bulk is considered. The corresponding statistical-kinetic problem is solved by calculating the distribution functions of the “relay-race” path lengths and travel times for the edge-domain boundary. The related problem of the influence of uncontrolled noise on the propagation of signals in transmission lines is discussed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Avalanche mode of high-voltage overloaded p{sup +}–i–n{sup +} diode switching to the conductive state by pulsed illumination

A simple analytical theory of the picosecond switching of high-voltage overloaded p{sup +}–i–n{sup +} photodiodes to the conductive state by pulsed illumination is presented. The relations between the parameters of structure, light pulse, external circuit, and main process characteristics, i.e., the amplitude of the active load current pulse, delay time, and switching duration, are derived and confirmed by numerical simulation. It is shown that the picosecond light pulse energy required for efficient switching can be decreased by 6–7 orders of magnitude due to the intense avalanche multiplication of electrons and holes. This offers the possibility of using pulsed semiconductor lasers as a control element of optron pairs.

36 MATERIALS SCIENCE↗

Switching Channel Development Dynamics in Planar Structures on the Basis of Vanadium Dioxide

The results of the experimental studies and numerical simulation of the switching channel development dynamics in planar structures on the basis of vanadium dioxide are reported. The obtained data on the variation of the temperature in the channel with time and of the current arisen after the pulsed load, and on the times of transition from the high-resistance to the low-resistance state and back are analyzed in order to determine the switching mechanism and to predict the functional characteristics of the switchable vanadium- oxide structures as promising materials for the creation of relaxation generators that can serve as prototypes of neural oscillators. It is shown that the switching behavior is associated with the metal–semiconductor phase transition in vanadium dioxide, which is stimulated by the emission of Joule heat.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Analysis of integrated thyristor switching-off by a reverse gate pulse current

To increase the maximum power current density of an integrated n{sup +}p'Nn'p{sup +}-type thyristor during switching-off by a current pulse in the control circuit, the injection of electrons from the n{sup +} emitter should be interrupted before the recovery of the collector p'N junction. This has been done using a rapidly increasing reverse gate current pulse with an amplitude equal to the amplitude of the power switched-off current. After the interruption of the emitter injection, the remaining current through the device is the current of holes extracted from the collector region via the gate electrode. Like in insulated gate bipolar transistors (IGBTs), the physical mechanism that limits the maximum density of the switch-off current is the dynamic avalanche breakdown, which is initiated by the holes extracted through the space charge region of the collector p'N junctions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Effect of Irradiation with Si{sup +} Ions on Resistive Switching in Memristive Structures Based on Yttria-Stabilized Zirconia

We have studied the resistive switching in memristive structures based on 40-nm-thick yttria-stabilized zirconia (YSZ) films exposed to 6-keV Si{sup +} ion irradiation to a total dose of 5.4 × 10{sup 15} cm{sup –2}. It is established that the ion irradiation leads to increased stability of the parameters of resistive switching in YSZ based memristive structures. This effect is related to the fact that the diameter of conducting filaments in irradiated structures is limited by lateral dimensions of the region of atomic displacement cascades (i.e., the region occupied by point defects produced by bombarding ions). The oxidation of ion-modified filaments during resistive switching proceeds more effectively and leads to increasing resistance in the high-resistance state of memristive structures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

An Effective Switching-Off Mechanism for High-Performance Carbon Nanotube Field-Effect Transistors

We report an effective switching-off mechanism for the fabrication of high-performance carbon nanotube field-effect transistors (CNTFETs) formed by ultra-purified single-walled carbon nanotubes (SWCNTs) with p-type Sb{sub 2}Te{sub 3} semiconductor as the source and drain contact material and a narrow platinum gate entirely defined inside the source and drain contact region. CNTFETs show drain-source current (I{sub DS}) as a function of drain-source voltage (V{sub DS}) and gate voltage (V{sub GS}) of similar characteristics to a p-channel junction field-effect transistor (JFET). CNTFETs are normally on, and they can be effectively switched off with applying a positive gate voltage. By localizing the gate action primarily on the SWCNTs, away from the source and drain contacts, we could clearly interpret the beneficial effect of semiconducting contacts on the performance of CNTFETs. The proposed device is novel and could be a solution to the switching-off problem in CNTFETs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Development of a switched integrator amplifier for high-accuracy optical measurements

In the field of low flux optical measurements, the development and use of large area silicon detectors is becoming more frequent. The current/voltage conversion of their photocurrent presents a set of problems for traditional transimpedance amplifiers. The switched integration principle overcomes these limitations. We describe the development of a fully characterized current-voltage amplifier using the switched integrator technique. Two distinct systems have been developed in parallel at the United Kingdom's National Physical Laboratory (NPL) and Czech Metrology Institute (CMI) laboratories. We present the circuit theory and best practice in the design and construction of switched integrators. In conclusion the results achieved and future developments are discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

350 mJ electro-optically Q-switched 2.79 µm Cr:Er:YSGG MOPA

We report on developing three flashlamp-pumped electro-optically Q-switched Cr:Er:YSGG lasers with the Q-switch based on a La 3 Ga 5 SiO 14 crystal. The “short” laser cavity was optimized for high peak power applications. In this cavity, 300 mJ output energy in 15 ns pulses at a 3 Hz repetition rate was demonstrated with pump energy below 52 J. However, several applications, such as Fe:ZnSe pumping in a gain-switched regime, require longer (∼ 100 ns) pump pulse duration. We developed a 2.9 m long laser cavity that delivers 190 mJ of output energy in 85 ns pulses for these applications. We also demonstrated the Cr:Er:YSGG MOPA system producing 350 mJ output energy at 90 ns pulse duration and 47.5 J of pumping, corresponding to an amplification factor of 3.

47 OTHER INSTRUMENTATION↗