Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “spatial mapping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Geometric Accuracy of LANDSAT-4 MSS Image Data

Analyses of the LANDSAT-4 MSS image data of North Georgia provided by the EDC in CTT-p formats reveal that errors of approximately + or - 30 m in the raw data can be reduced to about + or - 55 m based on rectification procedures involving the use of 20 to 30 well-distributed GCPs and 2nd or 3rd degree polynomial equations. Higher order polynomials do not appear to improve the rectification accuracy. A subscene area of 256 by 256 pixels was rectified with a 1st degree polynomial to yield an RMSE sub xy value of + or - 40 m, indicating that USGS 1:24,000 scale quadrangle-sized areas of LANDSAT-4 data can be fitted to a map base with relatively few control points and simple equations. The errors in the rectification process are caused by the spatial resolution of the MSS data, by errors in the maps and GCP digitizing process, and by displacements caused by terrain relief. Overall, due to the improved pointing and attitude control of the spacecraft, the geometric quality of the LANDSAT-4 MSS data appears much improved over that of LANDSAT-1, -2 AND -3.

Welch, R.↗
NASA NTRS2010

Lunar Reconnaissance Orbiter (LRO): Observations for Lunar Exploration and Science

The Lunar Reconnaissance Orbiter (LRO) was implemented to facilitate scientific and engineering-driven mapping of the lunar surface at new spatial scales and with new remote sensing methods, identify safe landing sites, search for in situ resources, and measure the space radiation environment. After its successful launch on June 18,2009, the LRO spacecraft and instruments were activated and calibrated in an eccentric polar lunar orbit until September 15, when LRO was moved to a circular polar orbit with a mean altitude of 50 km. LRO will operate for at least one year to support the goals of NASA's Exploration Systems Mission Directorate (ESMD), and for at least two years of extended operations for additional lunar science measurements supported by NASA's Science Mission Directorate (SMD). LRO carries six instruments with associated science and exploration investigations, and a telecommunications/radar technology demonstration. The LRO instruments are: Cosmic Ray Telescope for the Effects of Radiation (CRaTER), Diviner Lunar Radiometer Experiment (DLRE), Lyman-Alpha Mapping Project (LAMP), Lunar Exploration Neutron Detector (LEND), Lunar Orbiter Laser Altimeter (LOLA), and Lunar Reconnaissance Orbiter Camera (LROC). The technology demonstration is a compact, dual-frequency, hybrid polarity synthetic aperture radar instrument (Mini-RF). LRO observations also support the Lunar Crater Observation and Sensing Satellite (LCROSS), the lunar impact mission that was co-manifested with LRO on the Atlas V (401) launch vehicle. This paper describes the LRO objectives and measurements that support exploration of the Moon and that address the science objectives outlined by the National Academy of Science's report on the Scientific Context for Exploration of the Moon (SCEM). We also describe data accessibility by the science and exploration community.

Vondrak, Richard↗
NASA NTRS2016

Simultaneous Boundary-Layer Transition, Tip Vortex, and Blade Deformation Measurements of a Rotor in Hover

This paper describes simultaneous optical measurements of a sub-scale helicopter rotor in the U.S. Army Hover Chamber at NASA Ames Research Center. The measurements included thermal imaging of the rotor blades to detect boundary layer transition; retro-reflective background-oriented schlieren (RBOS) to visualize vortices; and stereo photogrammetry to measure displacements of the rotor blades, to compute spatial coordinates of the vortices from the RBOS data, and to map the thermal imaging data to a three-dimensional surface grid. The test also included an exploratory effort to measure flow near the rotor tip by tomographic particle image velocimetry (tomo PIV)an effort that yielded valuable experience but little data. The thermal imaging was accomplished using an image-derotation method that allowed long integration times without image blur. By mapping the thermal image data to a surface grid it was possible to accurately locate transition in spatial coordinates along the length of the rotor blade.

Rotorcraft↗
NASA NTRS2019

Comparing Level-2 and Level-3 Satellite Ocean Color Retrieval Validation Methodologies

Many ocean color data applications leverage global spatially composited Level-3(L3) satellite data, because of their regular Earth-grid frame of reference. However, ocean color satellite retrieval performance is routinely evaluated on Level-2 (L2) data at the native satellite swath resolution and geometries. This study assesses how accurately binned and gridded L3 data represent L2 satellite data products via satellite-to-in situ match-up activities.L2 and L3 satellite data retrievals of the photosynthetic pigment chlorophyll-a are compared with a common in situ data set, revealing similar L2 and L3 satellite-to-in situ performance for both MODIS-Aqua and VIIRS-SNPP. This agreement implies that L2 validation results are generally applicable to L3 data. However, uncertainties are introduced during the generation of L3 data from L2 data. L3 data comparisons introduce a wider temporal window between the time of in situ measurement and the time of the satellite observation, which can unintentionally reflect on the quality of the satellite retrieval or algorithm performance. The choice of L3 map projection may introduce additional uncertainty by spatially distorting the true location of the satellite retrievals. Each manipulation of satellite data beyond theinstrument's native spatio temporal reference (L2) reduces the applicability of L2 validation results to higher data processing levels.

Ocean Color↗
NASA NTRS2000

Temperature Correction of Pressure-Sensitive Paints Simplified

Pressure-sensitive paint (PSP) has become a useful tool to augment conventional pressure taps in measuring the surface pressure distribution of aerodynamic components in wind tunnel testing. Although PSP offers the advantage of nonintrusive global mapping of the surface pressure, one prominent drawback to the accuracy of this technique is the inherent temperature sensitivity of PSP's luminescent intensity. Typical aerodynamic surface PSP tests rely on the coated surface to be both spatially and temporally isothermal, along with conventional instrumentation, to yield the highest accuracy pressure mappings. In some tests, however, spatial and temporal thermal gradients are generated by the nature of the test, as in a blowing jet impinging on a surface. In these cases, high accuracy and reliable data cannot be obtained unless the temperature variations on the painted surface are accounted for. A new temperature-correction technique was developed at the NASA Glenn Research Center at Lewis Field to collapse a "family" of PSP calibration curves to a single curve of intensity ratio versus pressure. This correction allows a streamlined procedure to be followed whether or not temperature information is used in the data reduction of the PSP.

Bencic, Timothy J.↗
NASA NTRS2004

Modeling Forest Understory Fires in an Eastern Amazonian Landscape

Forest understory fires are an increasingly important cause of forest impoverishment in Ammonia, but little is known of the landscape characteristics and climatic phenomena that determine their occurrence. We developed empirical functions relating the occurrence of understory fires to landscape features near Paragominas, a 35- yr-old ranching and logging center in eastern Ammonia. An historical sequence of maps of forest understory fire was created based on field interviews With local farmers and Landsat TM images. Several landscape features that might explain spatial variations in the occurrence of understory fires were also mapped and co-registered for each of the sample dates, including: forest fragment size and shape, forest impoverishment through logging and understory fires, source of ignition (settlements and charcoal pits), roads, forest edges, and others. The spatial relationship between forest understory fire and each landscape characteristic was tested by regression analyses. Fire probability models were then developed for various combinations of landscape characteristics. The analyses were conducted separately for years of the El Nino Southern Oscillation (ENSO), which are associated with severe drought in eastern Amazonia, and non-ENS0 years. Most (91 %) of the forest area that burned during the 10-yr sequence caught fire during ENSO years, when severe drought may have increased both forest flammability and the escape of agricultural management fires. Forest understory fires were associated with forest edges, as reported in previous studies from Ammonia. But the strongest predictor of forest fire was the percentage of the forest fragment that had been previously logged or burned. Forest fragment size, distance to charcoal pits, distance to agricultural settlement, proximity to forest edge, and distance to roads were also correlated with forest understory fire. Logistic regression models using information on fragment degradation and distance to ignition sources accurately predicted the location of lss than 80% of the forest fires observed during the ENSO event of 1997- 1998. In this Amazon landscape, forest understory fire is a complex function of several variables that influence both the flammability and ignition exposure of the forest.

Alencar, A. A. C.↗
NASA NTRSDate not supplied

FloodPlanet: High-Resolution Commercial Imagery for Training and Validation of Deep Learning-Based Models of Inundation Extent

Flooding events are becoming increasingly frequent worldwide and are known to cause extensive damage. Public optical and radar satellite imagery can be used to detect large areas of inundation in rural areas, however, long revisit times and coarse spatial resolution limit applications for short-lived events and urban areas. Commercial constellations such as those operated by Planet offer increased spatial and temporal resolution and can supplement mapping efforts to provide more information to disaster response, relief, and mitigation efforts. Deep learning requires high quality labeled data for training across coincident sensors. The FloodPlanet dataset presented here contains labeled surface water for 18 events across the world based on Planetscope imagery with coincident Harmonized Landsat Sentinel-2 ( HLS) or Sentinel-1 and builds upon the previously existing Sen1Floods11, xBD, and NASA Sentinel-1 datasets. Sen1Floods11 includes 4,831 512x512 pixel overlapping tiles of coincident Sentinel-1 and Sentinel-2 data observing 11 flood events across the world from 2017-2019. The dataset contains a combination of automated and hand-labeled surface water for use in training and validation of inundation modeling efforts. The xBD dataset identifies flood-damaged buildings and indicates the scale of damage to each (none, minor, moderate, and major) from four flood events which occurred in the United States, India, Nepal, and Bangladesh from the same time period. The NASA dataset contains hand-labeled water bodies observed in Sentinel-1 imagery during five flood events within the 2017-2019 period. The effort presented here utilizes observations from these previously investigated flood events to generate labels of surface water at the 3-5m spatial resolution provided by Planetscope and facilitate the comparison between public and commercial data. A data pipeline was built which uses clustering algorithms to pick the most suitable overlapping chips between the public data and PlanetScope data for manual labeling. Labels were created manually using NASA’s ImageLabeler tool and include areas of high- and low-confidence water. The high confidence designation is reserved for areas of open, unobstructed water while low confidence is used for areas of suspected water beneath vegetation, clouds, or cloud shadows. Expected to be released in late 2022, the FloodPlanet dataset will include tiled imagery with a unique ID for each 1024x1024 pixel tile, 7 bands of HLS data, and high- and low-confidence flood labels in both shapefile and tiff formats. The authors will follow Spatial Temporal Access Catalog (STAC) guidelines to release FloodPlanet on the Radiant Earth ML hub, which hosts public datasets for machine learning.

Alexander Melancon↗
NASA NTRS2005

Geospatial Analysis and Remote Sensing from Airplanes and Satellites for Cultural Resources Management

Cultural resource management consists of research to identify, evaluate, document and assess cultural resources, planning to assist in decision-making, and stewardship to implement the preservation, protection and interpretation of these decisions and plans. One technique that may be useful in cultural resource management archaeology is remote sensing. It is the acquisition of data and derivative information about objects or materials (targets) located on the Earth's surface or in its atmosphere by using sensor mounted on platforms located at a distance from the targets to make measurements on interactions between the targets and electromagnetic radiation. Included in this definition are systems that acquire imagery by photographic methods and digital multispectral sensors. Data collected by digital multispectral sensors on aircraft and satellite platforms play a prominent role in many earth science applications, including land cover mapping, geology, soil science, agriculture, forestry, water resource management, urban and regional planning, and environmental assessments. Inherent in the analysis of remotely sensed data is the use of computer-based image processing techniques. Geographical information systems (GIS), designed for collecting, managing, and analyzing spatial information, are also useful in the analysis of remotely sensed data. A GIS can be used to integrate diverse types of spatially referenced digital data, including remotely sensed and map data. In archaeology, these tools have been used in various ways to aid in cultural resource projects. For example, they have been used to predict the presence of archaeological resources using modern environmental indicators. Remote sensing techniques have also been used to directly detect the presence of unknown sites based on the impact of past occupation on the Earth's surface. Additionally, remote sensing has been used as a mapping tool aimed at delineating the boundaries of a site or mapping previously unknown features. All of these applications are pertinent to the goals of site discovery and assessment in cultural resource management.

Giardino, Marco J.↗
NASA NTRS2024

Simulated Feasibility of 3D Lightning Mapping from Space

In addition to the awe it inspires, lightning can illuminate the microphysical processes hidden away within deep convection. The current generation of space-based lightning mapping uses mostly 2D optical imaging to connect overall flash characteristics to their parent storm dynamics, but are missing a dimension’s worth of information. With lightning now classified as an essential climate variable, future spaceborne mappers will need improved capabilities to take advantage of the 3D structure of lightning flashes to support meteorological and climate modeling. We report here on a study of the feasibility of implementing a radio frequency (RF)–based network of satellites for 3D lightning mapping in high resolution from low Earth orbit (LEO). Lightning sources are simulated using existing tools of the Lightning Mapping Array (LMA), modified for orbital detection, and spatially reconstructed using a Levenberg-Marquardt geolocation algorithm to assess sources of uncertainty in these solutions. We analyze the benefits and limitations of this approach compared to existing orbital and ground-based methods. Results of this study show that lightning can be mapped in 3D with a vertical location accuracy better than 2 km using as few as five satellites in LEO capable of measuring the time-of-arrival of impulsive RF signals in the very high frequency (VHF) band. The consequence of this study is that high-resolution, spaceborne 3D mapping of lightning is achievable across most of the globe, having crucial implications for our understanding of not only lightning, but also severe weather development, climate science, and more.

CubeSpark↗
NASA NTRS1974

Machine-aided analysis of land use - Landform relations from ERTS-1 MSS imagery, Sand Hills Region, Nebraska

Machine-aided analysis of ERTS-1 MSS data obtained over the Sand Hills of Nebraska indicates that reasonably accurate soils maps can be produced automatically. An interpretation of spectral class spatial distribution and statistical character allows confident assignment of familiar soil and cover type names to computer classes. Resultant computer classification maps are displayed on a television screen or printer image. Correlation between computer maps and the USDA soils map of the same area is high. Geographic distribution of classes of interest can be accentuated by automatic methods. Percentages of cover type for any classified area also can be obtained. Interpretation of machine maps yields information concerning land use, physiographic, soil, and hydrologic patterns of the region.

Sinnock, S.↗
DOE OSTI2021

Union: A Unified HW-SW Co-Design Ecosystem in MLIR for Evaluating Tensor Operationson Spatial Accelerators

To meet the extreme compute demands for deep learning across commercial and scientific applications, dataflow accelerators are becoming increasingly popular. While these“domain-specific” accelerators are not fully programmable like CPUs and GPUs, they retain varying levels of flexibility with respect to data orchestration, i.e., dataflow and tiling optimizations to enhance efficiency. There are several challenges when designing new algorithms and mapping approaches to execute the algorithms for a target problem on new hardware. Previous works have addressed these challenges individually. To address this challenge as a whole, in this work, we present an HW-SW co-design ecosystem for spatial accelerators called Union within the popular MLIR compiler infrastructure. Our framework allows exploring different algorithms and their mappings on several accelerator cost models. Union also includes a plug-and-play library of accelerator cost models and mappers which can easily be extended. The algorithms and accelerator cost models are connected via a novel mapping abstraction that captures the map space of spatial accelerators which can be systematically pruned based on constraints from the hardware, workload, and mapper. We demonstrate the value of Union for the community with several case studies which examine offloading different tensor operations (CONV/GEMM/Tensor Contraction) on diverse accelerator architectures using different mapping schemes.

Jeong, Geonhwa↗
DOE OSTI2026

Meteoric 10Be Flux Calibration Data for the East River Watershed, Colorado, USA

This data package contains tabular and geospatial data used to quantify and model meteoric beryllium-10 fluxes in the East River watershed, Colorado, USA. The tabular component includes calibration-site data from five glacial moraine sites and includes environmental variables used to evaluate spatial controls on meteoric 10Be delivery, including elevation, mean annual precipitation (MAP), mean snow depth, and mean snow water equivalent (SWE). These site-level data were used to compare observed fluxes with environmental gradients across the watershed and to evaluate the effects of erosion correction on flux estimates. The package also includes supporting slope and curvature values used to assess topographic inputs to the erosion analysis. A second component of the data package contains updated manuscript tables and regression outputs used to summarize the relationships between meteoric 10Be flux and environmental predictors. These tables include meteoric 10Be sample information and AMS results, site-level environmental values, site-level meteoric 10Be inventory and flux values, watershed-averaged predicted fluxes, soil bulk density measurements, fine-fraction values, soil pH measurements, and regression statistics including slope, intercept, coefficient of determination, and p-value. The regression products include both standard linear regressions and regressions in which the intercept is constrained to pass through zero, and they support the analyses presented in the companion manuscript. Together, these tabular files provide the numerical basis for the manuscript tables and the regression-based interpretation of meteoric 10Be flux variability in a snow-dominated mountain watershed. The geospatial component of the package consists of GeoTIFF raster files used to generate the map products presented in Figures 2 and 6 of the companion manuscript. These rasters represent watershed-scale spatial layers for environmental variables and regression-based predictions of meteoric 10Be flux. This dataset contains comma-separated values files (.csv), Microsoft Excel files (.xlsx), GeoTIFF raster files (.tif), and upporting metadata files, including CSV data dictionaries and readme text files (.csv, .txt). The tabular files can be opened with standard spreadsheet software, and the raster files can be viewed and analyzed in GIS software such as ArcGIS Pro or QGIS. Together, these files document the numerical and spatial datasets used to calibrate and predict meteoric 10Be delivery in the East River watershed.

East River↗
NASA NTRS2011

Aquarius Instrument and Salinity Retrieval

Aquarius has been designed to map the surface salinity field of the global ocean from space a parameter important for understanding ocean circulation and its relationship to climate and the global water cycle. Salinity is measured remotely from space by measuring the thermal emission from the ocean surface. This is done at the low frequency end of the microwave spectrum (e.g. 1.4 GHz) where the emission is sufficiently sensitive to changes in salinity to be detected with sophisticated radiometers. The goal is to monitor the seasonal and interannual variation of the large scale features of the surface salinity field in the open ocean by providing maps on a monthly basis with a spatial resolution of 150 km and an accuracy of 0.2 psu. These are challenging requirements that have led to some unique features of the instrument. These include: a) The addition of a co-located scatterometer to help provide a correction for roughness; b) The addition of a polarimetric channel (third Stokes parameter) to the radiometer to help correct for Faraday rotation; c) Asun-synchronous orbit with a 6 pm ascending equatorial crossing to minimize Faraday rotation and with the antennas looking away from the sun toward the nighttime side to minimize contamination by radiation from the sun; and d) An antenna designed to limit side lobes in the direction of rays from the sun. In addition, achieving the accuracy goal of 0.2 psu requires averaging over one month and to do this requires a highly stable radiometer. Aquarius has three separate radiometers that image in pushbroom fashion with the three antenna beams looking across track. The antenna is a 2.5-m diameter, offset parabolic reflector with three feed horns and the three beams are arranged to image with the boresight aligned to look across track, roughly perpendicular to the spacecraft heading and pointing away from the Sun. The three beams point at angles of theta = 25.8 deg., 33.8 deg. and 40.3 deg. with respect to the spacecraft nadir which correspond to local incidence angles at the surface of 28.7 deg., 37.8 deg. and 45.6 deg., respectively. The resolution of the three radiometer beams (axes of the 3dB ellipse) is: 76 x 94 km for the inner beam, 84 x 120 km for the middle beam to 96 x 156 km for the outer beam. Together they cover a swath of about 390 km. Aquarius will map the global ice-free ocean every 7-days from which monthly average composites will be derived. This will provide a snapshot of the mean field, as well as resolving the seasonal to interannual variations over the three-year baseline of the mission.

Le Vine, D. M.↗
DOE OSTI2023

Advanced silicon tracking detector developments for the future Electron-Ion Collider

The proposed Electron-Ion Collider (EIC) will operate high-luminosity high-energy electron+proton and electron+nucleus collisions at the collision energies from 20 GeV to 141 GeV to solve several fundamental questions in the high energy and nuclear physics fields. Its instantaneous luminosity can reach 10 33-34 cm -2 s -1 and the bunching crossing rate is around 10 ns. The EIC project has received CD1 approval from the US DOE in 2021 and moves toward the machine design and preparation for construction. To realize various particle measurements with high precision at the future EIC, a low material-budget and high-granularity silicon vertex and tracking detector with fine spatial and momentum resolutions and nearly 4π solid angle coverage is desired. The Monolithic Active Pixel Sensor (MAPS) and AC Coupled Low Gain Avalanche Diode (AC-LGAD) technologies stand out of several advanced technology options for the EIC silicon vertex and tracking detector subsystems. The MAPS technology has advanced features of low material budget, low power consumption, good radiation resistance and fine spatial resolution. The AC-LGAD technology can achieve fast timing resolution. Latest studies and progress of the EIC silicon vertex and tracking detector conceptual design, performance validations in simulation and ongoing MAPS and AC-LGAD R&D will be shown. Furthermore, schedule and plan of the EIC project detector development will be discussed as well.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS2002

Fractional Snowcover Estimates from Earth Observing System (EOS) Terra and Aqua Moderate Resolution Imaging Spectroradiometer (MODIS)

The Moderate Resolution Imaging Spectroradiometer (MODIS) on the NASA Earth Observing System (EOS) Terra and Aqua missions has shown considerable capability for mapping snowcover. The typical approach that has used, along with other criteria, the Normalized Snow Difference Index (NDSI) that takes the difference between 500 meter observations at 1.64 micrometers (MODIS band 6) and 0.555 micrometers (MODIS band 4) over the sum of these observations to determine whether MODIS pixels are snowcovered or not in mapping the extent of snowcover. For many hydrological and climate studies using remote sensing of snowcover, it is desirable to assess if the MODIS snowcover observations could not be enhanced by providing the fraction of snowcover in each MODIS observation (pixel). Pursuant to this objective studies have been conducted to assess whether there is sufficient "signal%o in the NDSI parameter to provide useful estimates of fractional snowcover in each MODIS 500 meter pixel. To accomplish this objective high spatial resolution (30 meter) Landsat snowcover observations were used and co-registered with MODIS 500 meter pixels. The NDSI approach was used to assess whether a Landsat pixel was or was not snowcovered. Then the number of snowcovered Landsat pixels within a MODIS pixel was used to determine the fraction of snowcover within each MODIS pixel. The e results were then used to develop statistical relationships between the NDSI value for each 500 meter MODIS pixel and the fraction of snowcover in the MODIS pixel. Such studies were conducted for three widely different areas covered by Landsat scenes in Alaska, Russia, and the Quebec Province in Canada. The statistical relationships indicate that a 10 percent accuracy can be attained. The variability in the statistical relationship for the three areas was found to be remarkably similar (-0.02 for mean error and less than 0.01 for mean absolute error and standard deviation). Independent tests of the relationships were accomplished by taking the relationship of fractional snow-cover to NDSI from one area (e.g., Alaska) and testing it on the other two areas (e.g. Russia and Quebec). Again the results showed that fractional snow-cover can be estimated to 10 percent. The results have been shown to have advantages over other published fractional snowcover algorithms applied to MODIS data. Most recently the fractional snow-cover algorithm has been applied using 500-meter observations over the state of Colorado for a period spanning 25 days. The results exhibit good behavior in mapping the spatial and temporal variability in snowcover over that 25-day period. Overall these studies indicate that robust estimates of fractional snow-cover can be attained using the NDSI parameter over areas extending in size from watersheds relatively large compared to MODIS pixels to global land cover. Other refinements to this approach as well as different approaches are being examined for mapping fractional snow-cover using MODIS observations.

Salomonson, Vincent V.↗
DOE OSTI2024

Universal model of Floquet operator Krylov space

It is shown that the stroboscopic time evolution under a Floquet unitary, in any spatial dimension, and of any Hermitian operator, can be mapped to an operator Krylov space, which is identical to that generated by the edge operator of the noninteracting Floquet transverse-field Ising model (TFIM) in one-spatial dimension, and with inhomogeneous Ising and transverse field couplings. The latter has four topological phases reflected by the absence (topologically trivial) or presence (topologically nontrivial) of edge modes at 0 and/or π quasienergies. It is shown that the Floquet dynamics share certain universal features characterized by how the Krylov parameters vary in the topological phase diagram of the Floquet TFIM with homogeneous couplings. Furthermore, these results are highlighted through examples, all chosen for numerical convenience to be in one spatial dimension: nonintegrable Floquet spin 1/2 chains and Floquet Z 3 clock model where the latter hosts period-tripled edge modes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1982

VLA observations of the evolution of a solar burst source structure at 6 centimeter wavelength

Evolutionary changes in the total intensity and polarization structure of a 6 cm radio burst source have been observed with the VLA, over time scales ranging from 10 s to several minutes. This burst was associated with a 2B/M1 flare observed on 1980 May 14. The 6 cm burst consisted of a gradual phase of 30 minutes duration and a strong impulsive phase of duration less than two minutes. Synthesized maps of total intensity and polarization were obtained with spatial resolution of 2 x 3 arcsec and with temporal resolutions of five minutes during the gradual phase and 10 s during the impulsive phase. The sequence of polarization maps suggests a complex magnetic field structure undergoing rapid changes. Most importantly, they show the development of two bipolar regions or quadrupole structure just prior to the impulsive energy release.

Velusamy, T.↗