Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solid phase processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

The Effect of Ion Irradiation on Nanocrystallization and Surface Relief of a Ribbon from Fe{sub 72.5}Cu{sub 1}Nb{sub 2}Mo{sub 1.5}Si{sub 14}B{sub 9} Alloy

Using the methods of X-ray diffraction and atomic force microscopy, the process of crystallization of an amorphous Fe{sub 72.5}Cu{sub 1}Nb{sub 2}Mo{sub 1.5}Si{sub 14}B{sub 9} alloy irradiated with accelerated Ar{sup +} ions is investigated. It is found out that an irradiation by the Ar{sup +} ions with the energy 30 keV at the ion current density 300 μA/cm{sup 2} (fluence 3.75·10{sup 15} cm{sup –2}, irradiation time ~2 s, ion-beam short-duration heating up to 350°С, which is 150°С lower than the thermal crystallization threshold) results in a complete crystallization of this amorphous alloy (throughout the bulk of a 25 μm ribbon) followed by precipitation of solid solution crystals of α-Fe(Si), close in its composition to Fe{sub 80}Si{sub 20}, stable phase of Fe{sub 3}Si, and metastable hexagonal phases. By the methods of atomic force and scanning tunneling microscopy it is shown that nanocrystallization caused by ion irradiation is accompanied by surface relief changes both on the irradiated and unirradiated sides of the Fe{sub 72.5}Cu{sub 1}Nb{sub 2}Mo{sub 1.5}Si{sub 14}B{sub 9} alloy ribbon at the depth exceeding by a factor of 10{sup 3} that of the physical ion penetration for this material. The data obtained, taking into account a significant temperature decrease and multiple acceleration of the crystallization process, serve an evidence of the radiation-dynamic influence of accelerated ions on the metastable amorphous medium.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2015

Cation-Dependent Stabilization of Electrogenerated Naphthalene Diimide Dianions in Porous Polymer Thin Films and Their Application to Electrical Energy Storage

Porous polymer networks (PPNs) are attractive materials for capacitive energy storage because they offer high surface areas for increased double-layer capacitance, open structures for rapid ion transport, and redox-active moieties that enable faradaic (pseudocapacitive) energy storage. Here we demonstrate a new attractive feature of PPNs—the ability of their reduced forms (radical anions and dianions) to interact with small radii cations through synergistic interactions arising from densely packed redox-active groups, only when prepared as thin films. When naphthalene diimides (NDIs) are incorporated into PPN films, the carbonyl groups of adjacent, electrochemically generated, NDI radical anions and dianions bind strongly to K+, Li+, and Mg2+, shifting the formal potentials of NDI’s second reduction by 120 and 460 mV for K+ and Li+-based electrolytes, respectively. In the case of Mg2+, NDI’s two redox waves coalesce into a single two-electron process with shifts of 240 and 710 mV, for the first and second reductions, respectively, increasing the energy density by over 20 % without changing the polymer backbone. In contrast, the formal reduction potentials of NDI derivatives in solution are identical for each electrolyte, and this effect has not been reported for NDI previously. This study illustrates the profound influence of the solid-state structure of a polymer on its electrochemical response, which does not simply reflect the solution-phase redox behavior of its monomers.

36 MATERIALS SCIENCE↗
DOE OSTI2017

An In Situ Formed, Dual-Phase Cathode with a Highly Active Catalyst Coating for Protonic Ceramic Fuel Cells

Composite cathodes of solid oxide fuel cells (SOFCs) are normally fabricated by mechanical mixing of electronic- and ionic-conducting phases. Here, a dual-phase SOFC cathode, composed of perovskite PrNi 0.5 Mn 0.5 O 3 (PNM) and exsoluted fluorite PrOx particles, produced in situ through a glycine–nitrate solution combustion process, is reported. When applied as the cathode for a BaZr 0.1 Ce 0.7 Y 0.1 Yb 0.1 O 3 -based protonic ceramic fuel cell, the hybrid cathode displays excellent electrocatalytic activity (area-specific resistance of 0.052 Ω cm 2 at 700 °C) and remarkable long-term stability when operated at a cell voltage of 0.7 V for ≈500 h using H 2 as fuel and ambient air as oxidant. The excellent performance is attributed to the proton-conducting BaPrO 3 -based coating and high-concentration oxygen vacancies of a Ba-doped PNM surface coating, produced by the reaction between the cathode and Ba from the electrolyte (via evaporation or diffusion), as confirmed by detailed X-ray photoelectron spectroscopy, Raman spectroscopy, and density functional theory-based calculations.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Synergistic Self-Assembly of Oxoanions and d-Block Metal Ions with Heteroditopic Receptors into Triple-Stranded Helicates

Cooperativity effects among the interconnected anion and cation binding sites can profoundly alter the performance of heteroditopic receptors in selective ion pair recognition, processes that are oftentimes pertinent to biological systems and chemical separations. In this paper, we report the effect of the linker that connects both binding sites on self-assembly of heteroditopic receptors in the presence of divalent first-row transition metal salts in solution and solid phase. Introduction of backbone flexibility in the receptor results in the formation of triple-stranded ion-pair helicates with an extraordinary selectivity towards CuSO 4 through an anion-induced fit.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Close-contact melting on an isothermal surface with the inclusion of non-Newtonian effects

The present study deals with a theoretical investigation of a close-contact melting (CCM) process involving a vertical cylinder on a horizontal isothermal surface, where the liquid phase is a non-Newtonian viscoplastic fluid that behaves according to the Bingham model. Accordingly, a new approach is formulated based on the thin layer approximation and different quasi-steady process assumptions. By analytical derivation, an algebraic equation that relates the molten layer thickness and the solid bulk height is developed. The problem is then solved numerically, coupled with another equation for the melting rate. The new model shows that as the yield stress increases the melting rate decreases and the molten layer thickness increases. It is found that under certain conditions, the model can be reduced to a form that allows an analytical solution. The approximate model predicts an exponential dependence of both the melt fraction and the molten layer thickness. Comparison between the numerical and analytical solutions shows that the analytical approximation provides an excellent estimation for sufficiently large values of the yield stress. Dimensional analysis, which is supported by the analytical model results, reveals the dimensionless groups that govern the problem. For the general case, the melt fraction is a function of two dimensionless groups. For the analytical approximation, it is shown that the melt fraction is governed by a single dimensionless group and that the molten layer thickness is governed by two dimensionless groups.

Mechanics↗
DOE OSTI2024

Fracture Dynamics in Silicon Anode Solid-State Batteries

Solid-state batteries (SSBs) with silicon anodes could enable improved safety and energy density compared to lithium-ion batteries. However, degradation arising from the massive volumetric changes of silicon anodes during cycling is not well understood in solid-state systems. Here, we use operando X-ray computed microtomography to reveal micro- to macro-scale chemo-mechanical degradation processes of silicon anodes in SSBs. Mud-type channel cracks driven by biaxial tensile stress form across the electrode during delithiation. We also find detrimental cracks at the silicon/ solid electrolyte interface that form due to local reaction competition between neighboring domains of different sizes. Continuum phase-field damage modeling quantifies stress-driven channel cracking and shows that the lithiated silicon stress state is critical for determining the extent of interfacial fracture. This work reveals the mechanisms that govern SSBs compared to conventional lithium-ion batteries and provides guidelines for engineering chemomechanically resilient electrodes for high-energy batteries.

25 ENERGY STORAGE↗
DOE OSTI2016

Piezoelectric domains in the AlGaN hexagonal microrods: Effect of crystal orientations

Presently, the piezoelectric materials are finding tremendous applications in the micro-mechanical actuators, sensors, and self-powered devices. In this context, the studies pertaining to piezoelectric properties of materials in the different size ranges are very important for the scientific community. The III-nitrides are exceptionally important, not only for optoelectronic but also for their piezoelectric applications. In the present study, we synthesized AlGaN via self-catalytic vapor-solid mechanism by atmospheric pressure chemical vapor deposition technique on AlN base layer over intrinsic Si(100) substrate. The growth process is substantiated using X-ray diffraction and X-ray photoelectron spectroscopy. The Raman and photoluminescence studies reveal the formation of AlGaN microrods in the wurtzite phase and ensure the high optical quality of the crystalline material. The single crystalline, direct wide band gap and hexagonally shaped AlGaN microrods are studied for understanding the behavior of the crystallites under the application of constant external electric field using the piezoresponse force microscopy. The present study is mainly focused on understanding the behavior of induced polarization for the determination of piezoelectric coefficient of AlGaN microrod along the c-axis and imaging of piezoelectric domains in the sample originating because of the angular inclination of AlGaN microrods with respect to its AlN base layers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Ab initio Geochemistry of Hydrous Phases (Final Report)

Hydrous phases are among the most important Earth components. They are important for a broad suite of Earth processes, including the origin of life. From both thermodynamic and structural perspectives, however, they represent some of the most complex naturally occurring materials: their bonding often includes a combination of covalent solid, weak ionic, van der Waals, and hydrogen bonding, all within large unit cells. Most are solid solutions, and many are prone to variations in layer packing. Thermodynamic modeling of these materials is fundamental for understanding present and past natural processes, including those that shaped—and continue to shape—the structure and evolution of our planet. Yet, the thermodynamic properties of these materials at appropriate conditions are challenging to measure. To make significant progress and attain a deep understanding of these materials requires an atomistic theoretical approach.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Kinetic and Mechanistic Study of Vapor-Phase Free Radical Polymerization onto Liquid Surfaces

The primary objective of this proposal was to study vapor deposition of polymers onto liquid surfaces. Deposition onto liquid surfaces is a relatively new area of research because the past few decades have focused on deposition onto solid materials. We used initiated chemical vapor deposition to deposit polymers onto the liquid surfaces. The process is a one-step, solventless, free-radical polymerization process in which monomer and initiator molecules are flowed into a vacuum chamber. We found that the surface tension interaction between the polymer and the liquid determines whether a film or nanoparticles are formed. We also found that we could form gels by using soluble monomers. We found that we could tune the size of the nanoparticles by varying the viscosity of the liquid and the process parameters including pressure and time. These insights allow scalable synthesis of polymer materials for a variety of separation and catalysis applications.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Structural Properties of Ditechnetium Heptoxide, Tc{sub 2}O{sub 7}

Group 7 elements form unique binary oxides with the stoichiometry M{sub 2}O{sub 7}. The heptoxides of manganese and technetium crystallize as molecular solids while rhenium forms an extended solid with mixed valances, 4 and 6. Unlike manganese and rhenium heptoxides which are used in the chemical industry technetium heptoxide has found very few applications due to its radioactive nature; it has been primarily use as a chemical precursor. While both of the molecular solids, Mn{sub 2}O{sub 7}{sup 3} and Tc{sub 2}O{sub 7}{sup 4} can be described by two corner-sharing MO{sub 4} tetrahedron. The most distinctive difference is that the manganese's compound has a metal-oxygen-metal bond angle of 120.7 deg. while the technetium species is 180 deg.. Additionally, Tc{sub 2}O{sub 7} has the largest molar volume of the heptoxides which suggest that it will be more susceptible to external stimuli of pressure and temperature than the others heptoxides. A pressure induced twisting has been predicted by Fang et al. Anomalous behavior is seen in the c-axis where below 2 GPa the Van der Waals interactions between the Tc{sub 2}O{sub 7} molecules is over come and compression is observed but at higher pressures the twisted distortion forces the lattice to expand. The terminology diagonal-double tetrahedrons (DDTs) is introduced to discuss the molecules of Tc{sub 2}O{sub 7}. The rigid nature of the DDTs has been attributed to the cause of this twisted distortion mechanism. Recently, the solid state and gas phase behavior of technetium heptoxide was revisited by Childs et al. in light of {sup 99}Tc being an important dose contributor in the Hanford waste and vitrification being proposed for immobilization of nuclear waste. Technetium heptoxide is one of the proposed volatilized species of technetium found in the vitrification process. In this study the crystal structure of Tc{sub 2}O{sub 7} was reported at 100 K and compared to the structure first determined by Krebs at room temperature. Inspection of the metal-oxygen distances revealed the 100 K structure had longer bond lengths for the bridging oxygen than at high temperature. It is suggested that transverse thermal vibrational modes can be used to explain this negative thermal expansion behavior. This describes the average bond length of a central atom (i.e. the bridging oxygen atom) being measured as shorter at higher temperatures due to the larger thermal motion. Diffraction methods that measure the long range average structure are susceptible to observing this shorter average length as opposed to the true bond length, atom position at oscillation node that a method like Pair-Distribution Functional PDF Analysis would yield. In the case of Tc{sub 2}O{sub 7}, the magnitude of the transverse thermal vibrational mode is at the limit of being detectable by SCXRD and likely not observable by PDF analysis. Here we report the preliminary results of our study on the nature of the thermal expansion behavior of Tc{sub 2}O{sub 7}. The transverse thermal vibration mode compression mechanism is considered and compared to the pressure induced twisted distortion mechanism predicted at high pressure. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2015

Nitric-acid hydrolysis of Miscanthus giganteus to sugars fermented to bioethanol

Miscanthus giganteus ( M. giganteus ) is a promising feedstock for the production of bioethanol or biochemicals. Using only dilute nitric acid, this work describes a two-step process for hydrolyzing hemicellulose and cellulose to fermentable sugars. Primary variables were temperature and reaction time. The solid-to-liquid mass ratio was 1:8. No enzymes were used. In the first step, M. giganteus was contacted with 0.5 wt.% nitric acid at temperatures between 120 and 160°C for 5 to 40 min. The second step used 0.5 or 0.75 wt.% nitric acid at temperatures between 180 and 210°C for less than 6 min. Under selected conditions, almost all hemicellulose and 58% cellulose were transferred to the liquid phase. Small amounts of degradation products were observed. The xylose solution obtained from the nitric-acid hydrolysis was fermented for 96 h and the glucose solution for 48 h to yield 0.41 g ethanol/g xylose and 0.46 g ethanol/g glucose. To characterize residual solids and the liquor from both steps, nuclear-magneticresonance (NMR) spectroscopy was performed for each fraction. In conclusion, the analytical data indicate that the liquid phase from Steps 1 and 2 contain little lignin or lignin derivatives.

09 BIOMASS FUELS↗
DOE OSTI2023

A Guideline to Mitigate Interfacial Degradation Processes in Solid‐State Batteries Caused by Cross Diffusion

Abstract Diffusion of transition metals across the cathode–electrolyte interface is identified as a key challenge for the practical realization of solid‐state batteries. This is related to the formation of highly resistive interphases impeding the charge transport across the materials. Herein, the hypothesis that formation of interphases is associated with the incorporation of Co into the Li 7 La 3 Zr 2 O 12 lattice representing the starting point of a cascade of degradation processes is investigated. It is shown that Co incorporates into the garnet structure preferably four‐fold coordinated as Co 2+ or Co 3+ depending on oxygen fugacity. The solubility limit of Co is determined to be around 0.16 per formula unit, whereby concentrations beyond this limit causes a cubic‐to‐tetragonal phase transition. Moreover, the temperature‐dependent Co diffusion coefficient is determined, for example, D 700 °C = 9.46 × 10 −14 cm 2 s −1 and an activation energy E a = 1.65 eV, suggesting that detrimental cross diffusion will take place at any relevant process condition. Additionally, the optimal protective Al 2 O 3 coating thickness for relevant temperatures is studied, which allows to create a process diagram to mitigate any degradation with a minimum compromise on electrochemical performance. This study provides a tool to optimize processing conditions toward developing high energy density solid‐state batteries.

Chemistry↗
DOE OSTI2019

An Analytical Bond Order Potential for Mg-H Systems

Magnesium–based materials provide some of the highest capacities for solid–state hydrogen storage. However, improving their performance rely on a comprehensive understanding of thermodynamic and kinetic limitations at various stages of (de)hydrogenation. Complexity arises because unlike interstitial metal hydrides that retain the same crystal structures of the underlying metals, MgH2 and other magnesium–based hydrides undergo dehydrogenation reactions that are coupled to a structural phase transformation. As a first step towards enabling molecular dynamics studies of thermodynamics, kinetics, and (de)hydrogenation mechanisms of Mg–based solid–state hydrogen storage materials with changing crystal structures, we have developed an analytical bond order potential for Mg–H systems. We demonstrate that our potential accurately reproduces property trends of a variety of elemental and compound configurations with different coordinations, including small clusters and bulk lattices. More importantly, we show that our potential captures the relevant (de)hydrogenation chemical reactions 2H (gas) –> H2 (gas) and H (gas) + Mg (hcp) –> MgH2 (rutile) within molecular dynamics simulations. This verifies that our potential correctly prescribes the lowest Gibbs free energies to the equilibrium H2 and MgH2 phases as compared to other configurations. As a result, it also indicates that our molecular dynamics methods can directly reveal atomic processes of (de)hydrogenation of the Mg–H systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

A finite difference informed random walker (FDiRW) solver for strongly inhomogeneous diffusion problems

In nature, many complex multi-physics coupling problems exhibit strong diffusivity inhomogeneity. For instance, in the context of radionuclide absorption by porous wasteform materials within a flowing waste stream, the difference of species’ diffusivity in solid and liquid phases spans by 3~8 orders of magnitude. To solve the diffusion equations with strongly inhomogeneous diffusivity, traditional discretization-based methods, such as the Finite Difference Method (FDM), require infinitesimally small time steps (<10 -10 ) as high spatial resolutions are employed in most microstructure evolution processes, leading to prohibitively high computational costs. Here, this work developed an integrated numerical approach (FDiRW: Finite Difference informed Random Walk) to tackle this challenge. The idea is that utilizing the Random Walk concept, the fast diffusion is modeled as a superposition of point source’s solution for a concentration distribution while FDM is used to obtain the point source’s solution at each node. A mesh-coarsening algorithm is developed to generate an exclusive coarse mesh for FDiRW approach to maximize its efficiency. The effectiveness of the coarse mesh-based FDiRW approach is validated by benchmarking Finite Difference solutions. Numerical results demonstrated that FDiRW achieves a remarkable 1000x computational efficiency improvement over FDM while preserving desired accuracy for a medium-sized model of 192 × 192 × 192 grids. Finally, as models scale up, a floating-point operations (PLOPs) analysis of the FDiRW algorithm reveals that its computational complexity grows quadratically in terms of the number of nodes employed in computation.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Elucidating Molecular Interactions in Glycerol Adsorption at the Metal–Water Interface with Density Functional Theory

Glycerol is an extremely versatile platform molecule for chemical and fuel production, as evidenced by successful demonstrations in electrochemical and thermochemical processes, where key catalytic chemistries occur at the solid–liquid interface. Despite the remarkable progress made in enriching the first-principles-based computational tool set to reveal and characterize solvent structures in the past decade, techniques for realistic and efficient molecular-level modeling to study aqueous-phase glycerol chemistry are still far from mature. Many aqueous-phase catalytic systems are deemed too complex for routine modeling because of their highly correlated structures at the heterogeneous solid–liquid interface. This invited feature article merges recent developments in quantum mechanical solvation models and oxygenated hydrocarbon conversion chemistry by revisiting the molecular interactions of adsorbed glycerol and its dehydrogenation intermediates at the water–metal interface. Explicit participation of water through the establishment of water–adsorbate, water–water, and water–metal interactions on Pt(111) was investigated using density functional theory. In periodic models, the adsorption favors networklike structures with adsorbates as nodal points linked by coadsorbed water molecules. We also showed that these adsorption patterns actually preserve the original bond-order-based scaling relationship framework established without the consideration of solvent. This behavior can be exploited to improve computational efficiency for future analysis of catalytic polyol conversions in the aqueous-phase environment.

Shan, Nannan↗
DOE OSTI2021

3D Printable All-Polymer Epoxy Composites

Herein, 3D printable polymer-toughened epoxy resin composites are reported. Epoxy resins are widely used due to their excellent properties, such as thermal and chemical stability. However, their applications are limited by traditional mold-based manufacturing and their high brittleness. Mixtures of homopolymers, diblock copolymers, and triblock copolymers composed of poly(phenylene ether), poly(styrene), poly(methyl methacrylate), and poly(ethylene oxide) that self-assemble into micelles in the uncured resin are employed, providing a balance of structure, creep resistance, and flowability that enables 3D printing processing techniques and a retention of dimensional fidelity from the time of printing throughout the cured state. The precured ink is solid at room temperature and has strong shear-thinning behavior at elevated temperature for printing. As the printed parts cure, the polymer morphology evolves via reaction induced phase separation to yield finished composites with enhanced mechanical properties, including a 40% increase in the impact strength compared to the neat epoxy, without compromising thermal properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2013

Power law and exponential ejecta size distributions from the dynamic fragmentation of shock-loaded Cu and Sn metals under melt conditions

Large scale molecular dynamics (MD) simulations are performed to study and to model the ejecta production from the dynamic fragmentation of shock-loaded metals under melt conditions. A generic 3D crystal in contact with vacuum containing about 10{sup 8} atoms and with a sinusoidal free surface roughness is shock loaded so as to undergo a solid-liquid phase change on shock. The reflection of the shock wave at the interface metal/vacuum gives rise to the ejection of 2D jets/sheets of atoms (Richtmyer-Meshkov instabilities in the continuum limit), which develop and break up, forming ejecta (fragments) of different volumes (or mass). The fragmentation process is investigated by analyzing the evolution of the resulting volume distribution of the ejecta as a function of time. Two metals are studied (Cu and Sn) and the amplitude of the roughness is varied. The simulations show that the associated distributions exhibit a generic behavior with the sum of two distinct terms of varying weight, following the expansion rate of the jets: in the small size limit, the distribution obeys a power law dependence with an exponent equal to 1.15 ± 0.08; and in the large size limit, it obeys an exponential form. These two components are interpreted, with the help of additional simple simulations, as the signature of two different basic mechanisms of fragmentation. The power law dependence results from the fragmentation of a 2D network of ligaments arranged following a fractal (scale free) geometry and generated when the sheets of liquid metal expand and tear. The exponential distribution results from a 1D Poisson fragmentation process of the largest ligaments previously generated. Unlike the power law distribution, it is governed by a characteristic length scale, which may be provided by energy balance principle.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

Vapor deposition of a nonmesogen prepares highly structured organic glasses

Significance Organic glasses are useful, versatile materials for current and future organic electronic technologies. They are nonequilibrium materials, so a single-component system can be processed in different ways to create a wide range of solids with diverse structural and optical properties. In this work, we use physical vapor deposition to prepare glasses with structure similar to that of an aligned smectic liquid crystal from a molecule that does not have any liquid crystal phases. This shows the potential to create highly structured glasses from a wide range of molecules.

Bishop, Camille↗