Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “salinity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

An Evaluation of Antarctica as a Calibration Target for Passive Microwave Satellite Missions

Passive microwave remote sensing at L-band (1.4 GHz) is sensitive to soil moisture and sea surface salinity, both important climate variables. Science studies involving these variables can now take advantage of new satellite L-band observations. The first mission with regular global passive microwave observations at L-band is the European Space Agency's Soil Moisture and Ocean Salinity (SMOS), launched November, 2009. A second mission, NASA's Aquarius, was launched June, 201l. A third mission, NASA's Soil Moisture Active Passive (SMAP) is scheduled to launch in 2014. Together, these three missions may provide a decade-long data record -- provided that they are intercalibrated. The intercalibration is best performed at the radiance (brightness temperature) level, and Antarctica is proving to be a key calibration target. However, Antarctica has thus far not been fully characterized as a potential target. This paper will present evaluations of Antarctica as a microwave calibration target for the above satellite missions. Preliminary analyses have identified likely target areas, such as the vicinity of Dome-C and larger areas within East Antarctica. Physical sources of temporal and spatial variability of polar firn are key to assessing calibration uncertainty. These sources include spatial variability of accumulation rate, compaction, surface characteristics (dunes, micro-topography), wind patterns, and vertical profiles of density and temperature. Using primarily SMOS data, variability is being empirically characterized and attempts are being made to attribute observed variability to physical sources. One expected outcome of these studies is the potential discovery of techniques for remotely sensing--over all of Antarctica--parameters such as surface temperature.

Kim, Edward↗

Arctic Ocean Freshwater: How Robust are Model Simulations

The Arctic freshwater (FW) has been the focus of many modeling studies, due to the potential impact of Arctic FW on the deep water formation in the North Atlantic. A comparison of the hindcasts from ten ocean-sea ice models shows that the simulation of the Arctic FW budget is quite different in the investigated models. While they agree on the general sink and source terms of the Arctic FW budget, the long-term means as well as the variability of the FW export vary among models. The best model-to-model agreement is found for the interannual and seasonal variability of the solid FW export and the solid FW storage, which also agree well with observations. For the interannual and seasonal variability of the liquid FW export, the agreement among models is better for the Canadian Arctic Archipelago (CAA) than for Fram Strait. The reason for this is that models are more consistent in simulating volume flux anomalies than salinity anomalies and volume-flux anomalies dominate the liquid FW export variability in the CAA but not in Fram Strait. The seasonal cycle of the liquid FW export generally shows a better agreement among models than the interannual variability, and compared to observations the models capture the seasonality of the liquid FW export rather well. In order to improve future simulations of the Arctic FW budget, the simulation of the salinity field needs to be improved, so that model results on the variability of the liquid FW export and storage become more robust.

Jahn, A.↗

IVGEN Post Flight Analysis

The Intravenous Fluid Generation (IVGEN) Experiment was a technology demonstration experiment that purified ISS potable water, mixed it with salt, and transferred it through a sterilizing filter. On-orbit performance was verified as appropriate and two 1.5 l bags of normal saline solution were returned to earth for post-flight testing by a FDA certified laboratory for compliance with United States Pharmacopiea (USP) standards. Salt concentration deviated from required values and an analysis identified probable causes. Current efforts are focused on Total Organic Content (TOC) testing, and shelf life.The Intravenous Fluid Generation (IVGEN) Experiment demonstrated the purification of ISS potable water, the mixing of the purified water with sodium chloride, and sterilization of the solution via membrane filtration. On-orbit performance was monitored where feasible and two 1.5-liter bags of normal saline solution were returned to earth for post-flight testing by a FDA-registered laboratory for compliance with United States Pharmacopeia (USP)standards [1]. Current efforts have been focused on challenge testing with identified [2] impurities (total organic-carbon), and shelf life testing. The challenge testing flowed known concentrations of contaminants through the IVGEN deionizing cartridge and membrane filters to test their effectiveness. One finding was that the filters and DI-resin themselves contribute to the contaminant load during initial startup, suggesting that the first 100 ml of fluid be discarded. Shelf life testing is ongoing and involves periodic testing of stored DI cartridges and membrane filters that are capped and sealed in hermetic packages. The testing is conducted at six month intervals measuring conductivity and endotoxins in the effluent. Currently, the packaging technique has been successfully demonstrated for one year of storage testing. The USP standards specifies that the TOC be conducted at point of generation as opposed to point of consumption. Samples were generated and shipped to an FDA facility however, testing determined that the samples failed the TOC specification with most likely due to leaching from the sample container. Shelf life testing is examining packaging techniques and periodic testing of samples of DI cartridges that are capped and sealed in hermetic packages. Periodic testing of the purified water output will be conducted at six month intervals.

microgravity applications↗

Declining Nutrient Concentrations in the Northeast Atlantic as a Result of a Weakening Subpolar Gyre

Between 1996 and the mid-2000s the upper waters (200-700 m) of the Rockall Trough became warmer (+0.72 C), saltier (+0.088) and reduced in nitrate and phosphate (-2.00 Micron and -0.14 Micron respectively). These changes, out-with calculated errors, can be explained by the varying influence of southern versus subpolar water masses in the basin as the Subpolar Gyre weakened and contracted. Upper water properties strongly correlate with a measure of the strength of the Subpolar Gyre (the first principal component of sea surface height over the Subpolar North Atlantic) prior to the mid-2000s. As the gyre weakens, the upper layers of the trough become warmer (r -0.85), more saline (r -0.86) and reduced in nitrate and phosphate (r +0.81 and r +0.87 respectively). Further the proportion of subpolar waters in the basin decreases from around 50% to less than 20% (r +0. 88). Since the mid-2000s the Subpolar Gyre has been particularly weak. During this period temperatures decreased slightly (-0.21 1C), salinities remained near constant (35.410 +/- 0.005) and phosphate levels low and stable (0.68 +/- 0.02 Micron). These relative lack of changes are thought to be related to the maximum proportion of southern water masses within the Rockall Trough having been reached. Thus the upper water properties are no longer controlled by changes in the relative importance of different water masses in the basin (as prior to the mid-2000s), but rather a different process. We suggest that when the gyre is particularly weak the interannual changes in upper water properties in the Rockall Trough reflect changes in the source properties of the southern water masses. Since the early-2000s the Subpolar Gyre has been weaker than observed since 1992, or modelled since 1960-1970. Hence upper waters within the Rockall Trough may be warmer, saltier and more depleted in nitrate and phosphate than at any time in the last half century.

nutrient↗

North Atlantic Simulations in Coordinated Ocean-Ice Reference Experiments Phase II (CORE-II). Part I: Mean States

Simulation characteristics from eighteen global ocean-sea-ice coupled models are presented with a focus on the mean Atlantic meridional overturning circulation (AMOC) and other related fields in the North Atlantic. These experiments use inter-annually varying atmospheric forcing data sets for the 60-year period from 1948 to 2007 and are performed as contributions to the second phase of the Coordinated Oceanice Reference Experiments (CORE-II). The protocol for conducting such CORE-II experiments is summarized. Despite using the same atmospheric forcing, the solutions show significant differences. As most models also differ from available observations, biases in the Labrador Sea region in upper-ocean potential temperature and salinity distributions, mixed layer depths, and sea-ice cover are identified as contributors to differences in AMOC. These differences in the solutions do not suggest an obvious grouping of the models based on their ocean model lineage, their vertical coordinate representations, or surface salinity restoring strengths. Thus, the solution differences among the models are attributed primarily to use of different subgrid scale parameterizations and parameter choices as well as to differences in vertical and horizontal grid resolutions in the ocean models. Use of a wide variety of sea-ice models with diverse snow and sea-ice albedo treatments also contributes to these differences. Based on the diagnostics considered, the majority of the models appear suitable for use in studies involving the North Atlantic, but some models require dedicated development effort. atmospheric forcing atmospheric temperatures

ocean model comparisons↗

Aquarius Radiometer and Scatterometer Weekly-Polar-Gridded Products to Monitor Ice Sheets, Sea Ice, and Frozen Soil

Space-based microwave sensors have been available for several decades, and with time more frequencies have been offered. Observations made at frequencies between 7 and 183 GHz were often used for monitoring cryospheric properties (e.g. sea ice concentration, snow accumulation, snow melt extent and duration). Since 2009, satellite observations are available at the low frequency of 1.4 GHz. Such observations are collected by the Soil Moisture and Ocean Salinity (SMOS) mission, and the AquariusSAC-D mission. Even though these missions have been designed for the monitoring of soil moisture and sea surface salinity, new applications are being developed to study the cryosphere. For instance, L-band observations can be used to monitor soil freezethaw (e.g. Rautiainen et al., 2012), and thin sea ice thickness (e.g. Kaleschke et al., 2010, Huntemann et al., 2013). Moreover, with the development of satellite missions comes the need for calibration and validation sites. These sites must have stable characteristics, such as the Antarctic Plateau (Drinkwater et al., 2004, Macelloni et al., 2013). Therefore, studying the cryosphere with 1.4 GHz observations is relevant for both science applications, and remote sensing applications.

Aquarius↗

Estimating Major Ion and Nutrient Concentrations in Mangrove Estuaries in Everglades National Park Using Leaf and Satellite Reflectance

Coastal mangrove ecosystems are under duress worldwide because of urban development, sea-level rise, and climate change, processes that are capable of changing the salinity and nutrient concentration of the water utilized by the mangroves. This study correlates long-term water chemistry in mangrove environments, located in Everglades National Park,with mangrove spectral reflectance measurements made at both the leaf and canopy scales. Spectral reflectance measurements were collected using a handheld spectrometer for leaf-level measurements and Landsat 5TMdata for regional coverage. Leaf-level reflectance data were collected from three mangrove species (i.e., red, black and white mangroves) across two regions; a tall mangrove (approximately 18m) and dwarf mangrove (1- 2 m) region. The reflectance data were then used to calculate a wide variety of biophysical reflectance indices (e.g., NDVI, EVI, SAVI) to determine signs of stress. Discrete, quarterly water samples from the surface water, groundwater, and pore water (20 and 85 cm depths) and daily autonomous surface water samples were collected at each site and analyzed for major anions (Cl(−) and SO(2(-)/4)), cations (Na(+), K(+), Mg(sup 2(+)), and Ca(sup 2(+)), total nitrogen (TN) and total phosphorus (TP).Mangrove sites that exhibited the highest salinity and ionic concentrations in the surface and subsurface water also had the lowest near-infrared reflectance at both the leaf and satellite levels. Seasonal reflectance responses were measured in the near-infrared (NIR) wavelengths at both the leaf and canopy scales and were strongly correlated with nutrient and ionic concentrations in the surface and subsurface water, even though there was no significant separability between the three mangrove species. Study sites that experienced the greatest variability in surface and subsurface water ionic concentrations also exhibited the greatest fluctuations in NIR spectral reflectance. Landsat 5TM images were able to detect tall and dwarf mangroves by the differences in spectral indices (e.g., NDVI, NDWI, and EVI) because of the variability in the background conditions amongst the environments. In addition, Landsat 5TM images spanning 16 years (1993- 2009) were successfully used to estimate the seasonal variability in ionic concentrations in the surface water across the Florida Coastal mangrove ecotone. This study has shown that water chemistry can be estimated indirectly by measuring the change in spectral response at the leaf- or satellite-scale. Furthermore, the results of this research may be extrapolated to similar coastal mangrove systems throughout the Caribbean and world-wide wherever red, black, and white mangroves occur.

Mangroves↗

Aquarius Radiometer and Scatterometer Weekly Polar-Gridded Products to Monitor Ice Sheets, Sea Ice, and Frozen Soil

Space-based microwave sensors have been available for several decades, and with time more frequencies have been offered. Observations made at frequencies between 7 and 183 GHz were often used for monitoring cryospheric properties (e.g. sea ice concentration, snow accumulation, snow melt extent and duration). Since 2009, satellite observations are available at the low frequency of 1.4 GHz. Such observations are collected by the Soil Moisture and Ocean Salinity (SMOS) mission, and the Aquarius/SAC-D mission. Even though these missions have been designed for the monitoring of soil moisture and sea surface salinity, new applications are being developed to study the cryosphere. For instance, L-band observations can be used to monitor soil freeze/thaw (e.g. Rautiainen et al., 2012), and thin sea ice thickness (e.g. Kaleschke et al., 2010, Huntemann et al., 2013). Moreover, with the development of satellite missions comes the need for calibration and validation sites. These sites must have stable characteristics, such as the Antarctic Plateau (Drinkwater et al., 2004, Macelloni et al., 2013). Therefore, studying the cryosphere with 1.4 GHz observations is relevant for both science applications, and remote sensing applications.

Sea ice↗

Global Soil Moisture from the Aquarius/SAC-D Satellite: Description and Initial Assessment

Aquarius satellite observations over land offer a new resource for measuring soil moisture from space. Although Aquarius was designed for ocean salinity mapping, our objective in this investigation is to exploit the large amount of land observations that Aquarius acquires and extend the mission scope to include the retrieval of surface soil moisture. The soil moisture retrieval algorithm development focused on using only the radiometer data because of the extensive heritage of passive microwave retrieval of soil moisture. The single channel algorithm (SCA) was implemented using the Aquarius observations to estimate surface soil moisture. Aquarius radiometer observations from three beams (after bias/gain modification) along with the National Centers for Environmental Prediction model forecast surface temperatures were then used to retrieve soil moisture. Ancillary data inputs required for using the SCA are vegetation water content, land surface temperature, and several soil and vegetation parameters based on land cover classes. The resulting global spatial patterns of soil moisture were consistent with the precipitation climatology and with soil moisture from other satellite missions (Advanced Microwave Scanning Radiometer for the Earth Observing System and Soil Moisture Ocean Salinity). Initial assessments were performed using in situ observations from the U.S. Department of Agriculture Little Washita and Little River watershed soil moisture networks. Results showed good performance by the algorithm for these land surface conditions for the period of August 2011-June 2013 (rmse = 0.031 m(exp 3)/m(exp 3), Bias = −0.007 m(exp 3)/m(exp 3), and R = 0.855). This radiometer-only soil moisture product will serve as a baseline for continuing research on both active and combined passive-active soil moisture algorithms. The products are routinely available through the National Aeronautics and Space Administration data archive at the National Snow and Ice Data Center.

Soil MOisture↗

Aquarius Radiometer Status

Aquarius was launched on June 10, 2011 as part of the Aquarius/SAC-D observatory and the instrument has been operating continuously since being turned on in August of the same year. The initial map of sea surface salinity was released one month later (September) and the quality of the retrieval has continuously improved since then. The Aquarius radiometers include several special features such as measurement of the third Stokes parameter, fast sampling, and careful thermal control, and a combined passive/active instrument. Aquarius is working well and in addition to helping measure salinity, the radiometer special features are generating new results.

Mircrowave Remote Sensing↗

L-band RFI Detected by SMOS and Aquarius

Ocean salinity and soil moisture are key parameters for understanding the global water cycle, weather, and climate. These parameters are being measured with spaceborne radiometers operating in the L-band window at 14001427 MHz. Although man-made activity in this band is prohibited, radio frequency interference (RFI) is still a problem over significant portions of the earth. This paper reports a comparison of the RFI environment in this window as observed by two L-band radiometer systems, Aquarius and Soil Moisture and Ocean Salinity. The observed RFI environment depends on the sources and also on the characteristics of the instrument. Comparing the observations provides insight into the extent of the problem (actual sources), the influence of the instrument on the observation of RFI, and on potential ways of mitigating the effects. As this report shows, the global distribution of RFI is largely consistent between the two instruments, but the details, especially at low levels of RFI, depend on the characteristics of the instrument.

microwave radiometry↗

RFI Statistical Distribution and Missed Detection in Aquarius Radiometer Measurements

Aquarius is an microwave active/passive sensor whose main goal is to globally estimate sea surface salinity from space. Two instruments, a radar scatterometer and a radiometer, operate at L-band observing the same surface footprint almost simultaneously. The sensitivity to sea surface salinity (SSS) is given by the radiometer, while the scatterometer measurements provide a correction for sea surface roughness. Although the primary objective is the measurement of SSS, the instrument combination operates continuously, acquiring data over land and sea ice as well. Radio Frequency Interference (RFI) can occur in both the radiometer and the scatterometer bands of operation, and for this reason detection and mitigation of RFI was included in the data processing of both active and passive instruments. This paper will focus on the RFI processing for the Aquarius radiometer only and provide an update on the efforts to reduce the amount of missed RFI detection.

RFI↗

Predictability of Ocean Heat Content From Electrical Conductance

Ocean heat content (OHC) is a key climate variable that needs to be monitored to know how Earth's energy imbalance is changing, yet observing OHC remains a challenge. The present study examines whether a depth integral of the ocean's electrical conductivity (“conductance”), which may be inferred from both in situ methods and satellite magnetometers over the global ocean, could help monitor OHC. The ocean's electrical conductivity locally depends on temperature, salinity, and pressure, but it is not as well known how the conductance depends on OHC and ocean salt content. By examining the output of an ocean state estimate shown to agree well with observations that have not been assimilated, this study evaluates the fundamental limitations of using perfectly known ocean conductance to predict OHC, rather than the challenges associated with accounting for observational error. It is found that the ocean's conductance and OHC fields are nonlinearly related but nevertheless highly correlated. A statistical framework tends to predict OHC more accurately than ocean salt content from ocean conductance in regions where conductivity is more sensitive to salinity than temperature. The annually (bidecadally) averaged OHC can be predicted from a combination of conductance and depth‐averaged conductivity ocean fields to within nearly 0.1% (1%) error globally and even more accurately in many poorly observed (e.g., ice‐covered) regions. Practical application of this statistical framework to monitor OHC requires examination of the effect of uncertainties in the observed bathymetry and ocean conductance, which vary with application.

Trossman, D. S.↗

Three-Dimensional, Space-Dependent Mesoscale Diffusivity: Derivation and Implications

Recently, we presented a parameterization of an arbitrary tracer 3D mesoscale flux that describes both diabatic and adiabatic regimes without using arbitrary tapering functions. However, we did not parameterize the mesoscale diffusivity, which is the subject of this work. A key difference between the present and previous diffusivity parameterizations is that in the latter, the two main ingredients, mesoscale drift velocity and eddy kinetic energy, were not parameterized but determined using present data, which deprives the models of predictive power. Since winds, stratification, etc., are predicted to change in the future, use of these parameterizations to study future climate scenarios becomes questionable. In this work, we parameterize drift velocity and eddy kinetic energy (vertical–horizontal components), which we first assess with data [WOCE, TOPEX/Poseidon (T/P), and North Atlantic Tracer Release Experiment (NATRE)] and then use in a coarse-resolution stand-alone ocean code under Coordinated Ocean-Ice Reference Experiment I (CORE-I) forcing. We present results for the global ocean temperature and salinity, Atlantic overturning circulation, meridional heat transport, and Drake Passage transport, which we compare with several previous studies. The temperature drift is less than that of five of seven previous OGCMs, and the salinity drift is among the smallest in those studies. The predicted winter Antarctic Circumpolar Current mixed layer depths (MLDs) are in good agreement with the data. Predicting the correct MLD is important in climate studies since models that predict very deep mixed layers transfer more of the radiative perturbation to the deep ocean, reducing surface warming (and vice versa).

Eddies; Mesoscale processes; Mixing; Ocean models;↗

New Perspectives of Ancient Mars: Mineral Diversity and Crystal Chemistry at Gale Crater, Mars from the CheMin X-Ray Diffractometer

The Mars Science Laboratory Curiosity rover arrived at Mars in August 2012 with a primary goal of characterizing the habitability of ancient and modern environments. Curiosity landed in Gale crater to study a sequence of ~3.5 Ga old sedimentary rocks that, based on orbital visible/near-infrared reflectance spectra, contain secondary minerals that suggest deposition and/or alteration in liquid water. The sedimentary sequence that comprises the lower slopes of Mount Sharp within Gale crater may preserve a dramatic shift on early Mars from a relatively warm and wet climate to a cold and dry climate based on a transition from smectite-bearing strata to sulfate-bearing strata. The rover is equipped with cameras and geochemical and mineralogical instruments to examine the sedimentology and identify compositional changes within the stratigraphy. These observations provide information about variations in depositional and diagenetic environments over time. The Chemistry and Mineralogy (CheMin) instrument is one of two internal laboratories on Curiosity and includes a transmission X-ray diffractometer (XRD) and X-ray fluorescence (XRF) spectrometer with a Co-K source. CheMin measures loose sediment samples scooped from the surface and drilled rock powders. The XRD provides quantitative mineralogy of scooped and drilled samples to a detection limit of ~1 wt.%. Curiosity has traversed >20 km since landing and has primarily been exploring the site of a predominantly ancient lake environment fed by groundwater and streams emanating from the crater rim. Results from CheMin demonstrate an incredible diversity in the mineralogy of fluvio-lacustrine rocks that signify variations in source rock composition, sediment transport mechanisms, and depositional and diagenetic fluid chemistry. Abundant trioctahedral smectite and magnetite at the base of the section may have formed from low-salinity pore waters with a circumneutral pH within lake sediments. A transition to dioctahedral smectite, hematite, and Ca-sulfate going up section suggests a change to more saline and oxidative aqueous conditions within the lake waters themselves and/or within diagenetic fluids. The primary minerals detected in fluvio-lacustrine samples by CheMin also suggest diversity in the igneous source regions for the sediments, where abundant pyroxene and plagioclase in most samples suggest a basaltic protolith, but sanidine and pyroxene in one sample may have been sourced from a potassic trachyte, and tridymite and sanidine in another sample may have been transported from a rhyolitic source. Crystal chemistry of major phases in each sample have been calculated from refined unit-cell parameters, providing further constraints on aqueous alteration processes and igneous protoliths for the sediments. Perhaps one of the biggest mysteries revealed by the CheMin instrument is the high abundance of X-ray amorphous materials (15 to 73 wt.%) in all samples measured to date. X-ray amorphous materials were detected by CheMin based on the observation of broad humps in XRD patterns. How these materials formed, their composition, and why they persist near the martian surface remain a topic of debate. The sedimentology and composition of the rocks analyzed by Curiosity demonstrate that habitable environments persisted intermittently on the surface or in the subsurface of Gale crater for perhaps more than a billion years.

Rampe, E. B.↗

Diurnal Cycles in SST: Coupled Data Assimilation and Future Observational Requirements

Most operational centers are developing coupled (atmosphere-ocean) data assimilation systems as an alternative to uncoupled counterparts (atmosphere- or ocean-only). The Sea Surface Temperature (SST) is one of the key variables that tightly connects the atmosphere and ocean states and also air-sea fluxes. However, current prototype coupled data assimilation systems rely on external (L4) gridded SST or along-track (L3 or L2) SST retrievals as observed data or relaxation field. But in reality, SST are measurements are available from sparse in-situ network of ships, moorings, and buoys; all of them combined together are far less than those from satellites. However, satellites do not directly measure temperature, and inferring SST from satellite measured radiances requires a radiative transfer model, its calibration and also bias correction.The NASA Global Modeling and Assimilation Office (GMAO) is developing a coupled data assimilation system which assimilates SST directly from the raw observations, i.e., satellite radiances and in-situ observations. The methodology to directly assimilate radiances for SST became operational in Jan, 2017 in the GMAO's near-real time Weather Analysis and Prediction System. There were many modifications to the GMAO system in order to implement SST assimilation, most of which generally improved the predictability of the system. In order to maintain and further improve this system, we advocate for the availability of a microwave satellite radiometer in future beyond the currently operational GPM- GMI and AMSR-2 missions. For improved modeling of the near-surface temperature, salinity and mixing processes, we suggest adding more than one temperature sensor and salinity sensors to the drifting buoy network.

Akella, Santha↗

MERRA-2 Ocean: The NASA Global Modeling and Assimilation Office's Weakly Coupled Atmosphere-Ocean Reanalysis Using GEOS-S2S Version 3

The NASA Modern Era Reanalysis for Research and Applications (MERRA2) has been a respected and widely used reanalysis that has so far been restricted to the atmosphere. Now a newly released version of the atmosphere/ocean coupled data assimilation system (AODAS) has been developed by the NASA/Goddard Global Modeling and Assimilation Office to perform a retrospective ocean reanalysis from 1982 to present. In addition to assimilating all available in situ data (e.g. Argo, mooring, XBT and CTD data) and altimetry information into the ocean, the new version (GEOS-S2S Version 3) model includes a higher resolution, eddy-permitting ocean model than previous versions, a more realistic implementation of the atmosphere-ocean interface layer, and an improved coupling between glacier and ocean (among other improvements). In addition, this ocean data assimilation was expanded to include the assimilation of satellite sea surface salinity. The MERRA-2 AODAS will be described, and preliminary results will be shown from the assimilation reanalysis and from retrospective forecasts issued using a new ensemble strategy. Following the Global Ocean Data Assimilation Experiment (GODAE) protocols, we will present Class 1 through Class 4 validation results from the ocean reanalysis. Results indicate an improved ocean mixed layer depth, improved salinity near Greenland, an improved diurnal cycle of the sea surface skin temperature, an improved estimate of ocean evaporation, and better representation of western boundary currents (e.g. Gulf Stream) from our new ocean reanalysis. One of the motivations of this project is to provide optimal initial states for ENSO forecasting. Therefore, we will also present some preliminary results of retrospective ENSO forecasts. After thorough testing, it is expected that the GEOS-S2S Version 3 will replace our contributions to North American Multi-Model Ensemble (NMME), WCRP Subseasonal to Seasonal (S2S), and IRI seasonal prediction forecast projects.

Molod, Andrea↗

Implementation of Multidomain Unified Forward Operators (UFO) Within the Joint Effort for Data Assimilation Integration (JEDI): Ocean Applications

The Joint Effort for Data assimilation Integration (JEDI) is a collaborative development led by the Joint Center for Satellite Data Assimilation (JCSDA) in conjunction with NASA, NOAA and the Department of Defense (NAVY and Air Force). The (Sea-Ice Ocean and Coupled Assimilation) SOCA as one of the JCSDA projects, focuses on the application of JEDI to marine data assimilation. One of the goals of SOCA is to make use of surface-sensitive radiances to constrain sea-ice and upper ocean fields (e.g., salinity, temperature, sea-ice fraction, sea-ice temperature, etc.). The first elements toward an ocean/atmosphere coupled data assimilation capability within JEDI, with a focus on supporting and developing the assimilation of radiance observations sensitive to the ocean and atmosphere has been implemented. The direct radiance assimilation of surface sensitive microwave radiances focusing on Global Precipitation Measurement (GPM) Imager (GMI) for the SST Constraint and Soil Moisture Active Passive (SMAP) for the Sea Surface Salinity (SSS) has been the main focus. Also, in UFO the capability to calculate the cool skin layer depth and skin temperature has been implemented similar to the GEOS-5. It has been tested with GMI sea surface temperature retrievals. This is important because Satellite and in-situ observations of the Sea-Surface Temperature (SST) show high variability, including a diurnal cycle and very thin, cool skin layer in contact with the atmosphere, and Incorporating a realistic skin SST is essential for atmosphere-ocean coupled data assimilation.

Unified Forward Operators (UFO)↗