SEARCH · Engineering Papers

Results for “repeatability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

All sources NASA NTRS DOE OSTI

NASA NTRS1972

Hypersonic and transonic buzz measurements on the lower pitch flap of the M2-F2 lifting entry configuration

Free-oscillation damping measurements at hypersonic and transonic Mach numbers are presented for the lower pitch flap of the M2-F2 reentry vehicle. For the flow and model conditions tested, the damping measurements indicate the absence of hypersonic buzz instability for flap rotation frequencies of 47.3 Hz, 153 Hz, and 360 Hz, the presence of transonic buzz for 47.3 Hz flap, and the absence of transonic buzz for a 115 Hz flap. There are not enough flap damping data for an error estimate based on repeatability, but a partial damping calibration is presented in which an analog computer simulation of random flap response for a known flap damping is fed into the autocorrelation computer and filter combination used for most of the damping measurements.

Warner, R. W.↗

NASA NTRS1972

Techniques associated with thermal-vacuum testing of the OAO-C heat pipes

The mechanical problems associated with testing the two high-heat load pipes are discussed. One of these pipes was tested three times before being accepted. The first test resulted in the discovery of non-condensable hydrogen gas, which prevented the pipe from functioning properly. The second test was a repeat of the first, to see if all the gas had been removed. The third test was to see if any changes had occurred to the pipe as a result of saddle modifications. Saddle modifications were necessary because the epoxy binding agent between the saddles and the pipe had decomposed during the testing. The test problems discussed deal with the specially designed heat-removal devices, the mobile tilt table, the table position indicator, and the heat input mechanisms, all of which were necessary to conduct a high-heat load, thermal-vacuum test. The final results showed that the techniques used were adequate for thermal-vacuum testing of heat pipes.

Marshburn, J. P.↗

NASA NTRS1971

The 1970/71 spectral data management programs

The data management programs used by the Stanford Remote Sensing Laboratory to access, modify, and reduce the data obtained from both the NASA IR airborne spectrometer, and Stanford's SG-4 field spectrometer are reported. Many details covered in previous reports are not repeated. References are provided. These programs are written in FORTRAN 4 and S/360 Assembler Language, and are currently running on a S/360 model 67 (operating under OS/MFT) at the Stanford Computation Center Campus Facility.

Marshall, A. A.↗

NASA NTRS1972

Composite overwrapped metallic tanks

Work is reported for fabricating and testing the fiberglass overwrapped titanium pressure vessel for cryogenic service. Difficulties encountered in the tank liner fabrication phase involved explosive forming, vacuum annealing, chemical milling and electron beam welding. While each of these processes and the nondestructive test methods employed are normally considered to be individually reliable, the combination of poor material together with fabrication and development reversals prevented the full achievement of the desired end results. Eight tanks plus a prototype and tool proofing article were produced. Six of the vessels failed during the hydrostatic sizing operation. One of the remaining tanks was hydrostatically pressurized to burst and the other was pressurized repeatedly at 75 F from 100 psi to the operating pressure until failure occurred. As a result, it is not possible to draw firm conclusions as to the true value of the design concept due to the problems encountered in the program.

Caudill, C. L.↗

NASA NTRS1971

Zero-gravity transient thermal mixing simulation

The experimental program described is an outgrowth of independent investigations into alternate redesign concepts for the Apollo SM cryogenic oxygen storage system. The experiments were continued, after the redesign was established, to provide physical insight into transient thermal mixing in zero-gravity and to aid in the characterization of the system performance in flight. Zero-gravity heat transfer and fluid mixing were simulated experimentally through an analogy between unsteady heat conduction and species diffusion. To further support numerical analyses of the cryogenic oxygen storage system, the experimental investigation was extended to include a cubical tank geometry, representative of existing numerical models. In general, the transient flow patterns in the cubical tank are far more complex than those of the spherical tank and the extent of fluid mixing is significantly greater but less repeatable.

Lands, J. F., Jr.↗

NASA NTRS1972

Preliminary mission designs for Jupiter orbiter missions

Preliminary designs for unmanned orbital exploration missions to Jupiter are examined, and the operational options and systems requirements consistent with the major scientific goals of the mission are summarized. In general, each mission design provides repeated measurements of the interaction of Jupiter with the solar media, encounters at least two Galilean satellites with multiple encounters with at least one satellite at distances which allow photography with resolutions of at least 10 km; provides at least 10 orbital maps of the field and particle environment surrounding Jupiter, and provides synoptic observations of Jupiter over a range of wavelengths and various degrees of photographic coverage with resolutions of 300 to 30 km.

Swenson, B. L.↗

NASA NTRS1972

Computer analysis of two-dimensional fatigue flaw-growth problems

A description is given of a computer program for analyzing the crack propagation in cyclic loaded structures. By using equations for the stress intensity factors for surface and embedded flaws, the capability of ascertaining lengthwise crack growth as well as crack growth through the thickness of the structure was determined. Equations used are written in general form so that many other types of crack growth problems, such as through the thickness type cracks, can be analyzed. Provisions have been made in the computer program to analyze crack growth for repeated blocks of variable-amplitude fatigue load spectra. Additional features of the computer program include a variable print interval and a variable integration interval to minimize computer printout and computer run time. A source listing and instructions for using the computer program are included.

Forman, R. G.↗

NASA NTRS1972

A Theory for the Function of the Spermaceti Organ of the Sperm Whale (Physeter Catodon L.)

The function of the spermaceti organ of the sperm whale is studied using a model of its acoustic system. Suggested functions of the system include: (1) action as an acoustic resonating and sound focussing chamber to form and process burst-pulsed clicks; (2) use of nasal passages in forehead for repeated recycling of air for phonation during dives and to provide mirrors for sound reflection and signal processing; and (3) use of the entire system to allow sound signal production especially useful for long range echolocofion in the deep sea.

Norris, K. S.↗

NASA NTRS1972

Effects of magnets on pigeon homing

The function of magnets in the navigation system of homing pigeons is investigated. Only experienced pigeons with magnets or brass bars were studied. Data show that on sunny days, pigeons with the magnets had some difficulty in orientation while those with brass bars had no problems. The same experiment was repeated on cloudy days. These results show that the magnets did not interfere with orientation. This difference suggests that sun and magnetic cues are used interchangeably, but that both together seldom function.

Keeton, W. T.↗

NASA NTRS1972

Flat conductor cable for electrical packaging

Flat conductor cable (FCC) is relatively new, highly promising means for electrical packaging and system integration. FCC offers numerous desirable traits (weight, volume and cost savings, flexibility, high reliability, predictable and repeatable electrical characteristics) which make it extremely attractive as a packaging medium. FCC, today, finds wide application in everything from integration of lunar equipment to the packaging of electronics in nuclear submarines. Described are cable construction and means of termination, applicable specifications and standards, and total FCC systems. A list of additional sources of data is also included for more intensive study.

Angele, W.↗

NASA NTRS1972

Magnetic field signatures of substorms on high latitudes field lines in the nighttime magnetosphere

Two types of magnetic field changes are repeatedly observed in the high latitude nightside magnetosphere in association with magnetic substorms. One type is characterized by sudden decrease in the field strength, accompanied by an abrupt perturbation in the field declination angle. These changes are attributed to field aligned-sheet currents flowing on the high latitude boundary of an expanding plasma sheet following substorms. Single sheets of field-aligned currents on this boundary tend to flow toward the earth in the morning quadrant and away in the evening. Multiple sheets of current may also occur, with the direction of the high latitude sheet generally being the same as for a single sheet. A second type of field change is a decrease in field inclination during substorms. This is regarded as a manifestation of the changing field configuration during substorms and can be described in terms of azimuthal currents.

Fairfield, D. H.↗

NASA NTRS1972

Fatigue and fail-safe design features of the DC-10 airplane

The philosophy and methods used in the design of the DC-10 aircraft to assure structural reliability against cracks under repeated service loads are described in detail. The approach consists of three complementary parts: (1) the structure is designed to be fatigue resistant for a crack-free life of 60,000 flight hours; (2) inasmuch as small undetected cracks could develop from other sources, such as material flaws and manufacturing preloads, the structure also is designed to arrest and control cracks within a reasonable service-inspection interval; and (3) a meaningful service-inspection program has been defined on the basis of analysis and test experience from the design development program. This service-inspection program closes the loop to assure the structural integrity of the DC-10 airframe. Selected materials, fasteners, and structural arrangements are used to achieve these design features with minimum structural weight and with economy in manufacturing and maintenance. Extensive analyses and testing were performed to develop and verify the design. The basic design considerations for fatigue-resistant structure are illustrated in terms of material selection, design loads spectra, methods for accurate stress and fatigue damage analysis, and proven concepts for efficient detail design.

Stone, M. E.↗

NASA NTRS1972

Development and evaluation of vacuum pressure gauge components from carbon and graphite

A prototype all carbon triode ultrahigh vacuum gage was fabricated and tested. The gage exhibited a sensitivity of 3.7 per torr for nitrogen and an X-ray background approximately 0.1 as large as would be expected of a metal gage of the same design. The gage made from these materials, showed good sensitivity and durability. A practical technique was developed for bonding carbon components together without metal fasteners. The bond is made with a cross-linked phenolic resin which is converted to vitreous carbon by a careful pyrolysis procedure. The resulting bonds are strong, electrically conductive, and can withstand repeated excursions to 2500 K in vacuum. Measurements of adsorption and outgassing characteristics of four refractory carbons have confirmed that such materials are suitable for use in ultrahigh vacuum and that some are superior refractory metals in man respects.

Benson, D. K.↗

NASA NTRS1972

Atmospheric electricity criteria guidelines for use in aerospace vehicle development

Lightning has always been of concern for aerospace vehicle ground activities. The unexpected triggering of lightning discharges by the Apollo 12 space vehicle shortly after launch and the more recent repeated lightning strikes to the launch umbilical tower while the Apollo 15 space vehicle was being readied for launch have renewed interest in studies of atmospheric electricity as it relates to space vehicle missions. The material presented reflects some of the results of these studies with regard to updating the current criteria guidelines.

Daniels, G. E.↗

NASA NTRS1972

Large spacecraft antennas: Conical ring-membrane reflectors

A 1.83-m diameter furlable conical Gregorian antenna based on a novel spoke-supported ring-membrane concept has been successfully demonstrated. Mechanical measurements of the conical reflecting surface, as well as BE gain measurements at Ku-band, show an rms surface deviation from the proper conical surface of 0.3 mm and a repeatability after multiple furling-unfurling cycles of + or - 0.05 mm. Design features and performance characteristics of this antenna indicate that the spoke-supported ring-membrane concept is a promising approach for producing large, furlable, lightweight, conical reflectors for spacecraft high-gain antennas.

Oliver, R. E.↗

NASA NTRS1972

Monitoring fresh water resources

The author has identified the following significant results. ERTS-1 imagery is promising to be very useful for studying reservoir turbidity patterns. Initial coverage indicates a strong qualitative correlation between film density and turbidity. With repeated coverage and sampling the possibility of developing a reliable quantitative correlation looks good. The question of distinguishing between organic and inorganic suspended loads in Kansas reservoirs is open, but will require considerable more work to answer.

Yarger, H. L.↗

NASA NTRS1972

An elastic analysis of stresses in a uniaxially loaded sheet containing an interference-fit bolt

The stresses in a sheet with an interference-fit bolt have been calculated for two sheet-bolt interface conditions: a frictionless interface and a fixed (no-slip) interface. The stress distributions were calculated for various combinations of sheet and bolt moduli. The results show that for repeated loading the local stress range is significantly smaller if an interference bolt is used instead of a loosely fitting one. This reduction in local stress range is more pronounced when the ratio of bolt modulus to sheet modulus is large. The analysis also indicates that currently used standard values of interference cause yielding in the sheet.

Crews, J. H., Jr.↗

NASA NTRS1971

Multilayer insulation materials for reusable space vehicles.

Results of an extensive study conducted to evaluate multilayer insulation (MLI) materials suitable for repeated space vehicle operation are presented. Materials studied were radiation shields, shield spacers, blanket face sheets, fasteners, and adhesives. The Superfloc MLI concept - Kapton shields goldized on both sides as the radiation barrier with Dacron flock tufts as the spacers - appeared to be an excellent MLI for reusable cryogenic tankage. Superfloc configurations consisting of various combinations of film, spacer, and adhesive materials were manufactured and tested. Tensile, flexing, expansion, and cycling tests were performed on goldized Kapton and Mylar Superfloc and Beta glass reinforced Pyre ML face sheet material. A face sheet material that retains its shape was developed. Polyphenylene oxide material was selected for fabricating lightweight twin and tri-pin fasteners, together with grommets, face sheets, and reinforcement slabs. Measured material thermal conductivity values are tabulated.

Leonhard, K. E.↗