Results for “reference models” — Page 51

NASA NTRS2011

Assessment of Radiative Heating Uncertainty for Hyperbolic Earth Entry

This paper investigates the shock-layer radiative heating uncertainty for hyperbolic Earth entry, with the main focus being a Mars return. In Part I of this work, a baseline simulation approach involving the LAURA Navier-Stokes code with coupled ablation and radiation is presented, with the HARA radiation code being used for the radiation predictions. Flight cases representative of peak-heating Mars or asteroid return are de ned and the strong influence of coupled ablation and radiation on their aerothermodynamic environments are shown. Structural uncertainties inherent in the baseline simulations are identified, with turbulence modeling, precursor absorption, grid convergence, and radiation transport uncertainties combining for a +34% and ..24% structural uncertainty on the radiative heating. A parametric uncertainty analysis, which assumes interval uncertainties, is presented. This analysis accounts for uncertainties in the radiation models as well as heat of formation uncertainties in the flow field model. Discussions and references are provided to support the uncertainty range chosen for each parameter. A parametric uncertainty of +47.3% and -28.3% is computed for the stagnation-point radiative heating for the 15 km/s Mars-return case. A breakdown of the largest individual uncertainty contributors is presented, which includes C3 Swings cross-section, photoionization edge shift, and Opacity Project atomic lines. Combining the structural and parametric uncertainty components results in a total uncertainty of +81.3% and ..52.3% for the Mars-return case. In Part II, the computational technique and uncertainty analysis presented in Part I are applied to 1960s era shock-tube and constricted-arc experimental cases. It is shown that experiments contain shock layer temperatures and radiative ux values relevant to the Mars-return cases of present interest. Comparisons between the predictions and measurements, accounting for the uncertainty in both, are made for a range of experiments. A measure of comparison quality is de ned, which consists of the percent overlap of the predicted uncertainty bar with the corresponding measurement uncertainty bar. For nearly all cases, this percent overlap is greater than zero, and for most of the higher temperature cases (T >13,000 K) it is greater than 50%. These favorable comparisons provide evidence that the baseline computational technique and uncertainty analysis presented in Part I are adequate for Mars-return simulations. In Part III, the computational technique and uncertainty analysis presented in Part I are applied to EAST shock-tube cases. These experimental cases contain wavelength dependent intensity measurements in a wavelength range that covers 60% of the radiative intensity for the 11 km/s, 5 m radius flight case studied in Part I. Comparisons between the predictions and EAST measurements are made for a range of experiments. The uncertainty analysis presented in Part I is applied to each prediction, and comparisons are made using the metrics defined in Part II. The agreement between predictions and measurements is excellent for velocities greater than 10.5 km/s. Both the wavelength dependent and wavelength integrated intensities agree within 30% for nearly all cases considered. This agreement provides confidence in the computational technique and uncertainty analysis presented in Part I, and provides further evidence that this approach is adequate for Mars-return simulations. Part IV of this paper reviews existing experimental data that include the influence of massive ablation on radiative heating. It is concluded that this existing data is not sufficient for the present uncertainty analysis. Experiments to capture the influence of massive ablation on radiation are suggested as future work, along with further studies of the radiative precursor and improvements in the radiation properties of ablation products.

Johnston, Christopher O.↗

NASA NTRS2012

Physics Mining of Multi-Source Data Sets

Powerful new parallel data mining algorithms can produce diagnostic and prognostic numerical models and analyses from observational data. These techniques yield higher-resolution measures than ever before of environmental parameters by fusing synoptic imagery and time-series measurements. These techniques are general and relevant to observational data, including raster, vector, and scalar, and can be applied in all Earth- and environmental science domains. Because they can be highly automated and are parallel, they scale to large spatial domains and are well suited to change and gap detection. This makes it possible to analyze spatial and temporal gaps in information, and facilitates within-mission replanning to optimize the allocation of observational resources. The basis of the innovation is the extension of a recently developed set of algorithms packaged into MineTool to multi-variate time-series data. MineTool is unique in that it automates the various steps of the data mining process, thus making it amenable to autonomous analysis of large data sets. Unlike techniques such as Artificial Neural Nets, which yield a blackbox solution, MineTool's outcome is always an analytical model in parametric form that expresses the output in terms of the input variables. This has the advantage that the derived equation can then be used to gain insight into the physical relevance and relative importance of the parameters and coefficients in the model. This is referred to as physics-mining of data. The capabilities of MineTool are extended to include both supervised and unsupervised algorithms, handle multi-type data sets, and parallelize it.

Helly, John↗

NASA NTRS2012

Analyzing the IAR with IRI During the Recent Solar Minimum

The 2008-2009 solar minimum was deeper than any within the past century. As such, the performance of the empirical International Reference Ionosphere (IRI) model was impacted. This impact manifested as a disagreement between predicted and measured characteristic separation in frequency for a wave resonating within an Ionospheric Alfven Resonator (IAR). The predicted value of the characteristic was a factor of three lower than what was measured by the Communication/Navigation Outage Forecast System (C/NOFS). Analyzing the model performance and comparing output with measured ionospheric values showed that more than half of the inaccuracy could be explained by inaccuracies in the output of the model. The 2008-2009 solar minimum was outside of the bounds of the effectiveness of the empirical IRI model. Incorporating recent data measurements and new indices would increase the accuracy of IRI during this period.

Ivanov, S.↗

NASA NTRS2018

Enhancing the ISIS-I Topside Digital Ionogram Database

Selected original analog telemetry tapes from three of the topside-sounder satellites of theInternational Satellites for Ionospheric Studies (ISIS) program, namely Alouette 2, ISIS I, and ISIS II, wereused in an earlier project to produce more than Â½ million digital topside ionograms; the resulting digitaltopside ionograms from ISIS II were used to produce more than 86,000 globally distributed vertical topsideionospheric electron density profiles Ne(h) that cover a time span of more than a solar cycle. These Ne(h) wereproduced using the Topside Ionogram Scaler with True height algorithm auto-scaling software. Beforeattempting to automatically process Alouette-2 or ISIS-I ionograms, a data-enhancement project wasinitiated so as to increase the number of ionograms suitable for manual scaling and to increase theauto-processing success rate. These enhancements were mainly to correct problems that often occurredduring the analog-to-digital conversion of the original telemetry tapes. Here we illustrate the improvementsmade to the ISIS-I digital topside ionograms and compare Ne values at the satellite altitude and Ne(h)profiles, based on the manual scaling of selected ionograms, to both the auto-scaled values and thepredictions of the International Reference Ionosphere 2016 model. The results indicate the need to improvethe available auto-processing software for the new ISIS-I digital ionograms and that International ReferenceIonosphere 2016 predicts midlatitude winter topside Ne values that are too high in the late morning andat noon but too low in the early morning.

Benson, Robert F.↗

NASA NTRS2020

SISO Space Reference FOM 101

This is a tutorial that covers the basic concepts associated with the SISO Space Reference Federation Object Model. It will be given at the SISO 2020 SIW in Orlando, Florida.

Crues, Edwin Zack↗

NASA NTRS2021

Effects of Energy Capture and Recovery on an N+3 Technology Level Reference Propulsion System

An initial, parametric study was performed to assess the benefits and drawbacks of waste heat recovery on a gas turbine engine. The NASA N+3 technology level reference propulsion system model, an advanced, single-aisle class, gas turbine engine was the baseline cycle. The amount of thermal energy removed from the high-energy core flow and transferred to lower-energy bypass or removed from the cycle was varied. Total pressure losses were included parametrically, as well as the effects of converting some of that thermal energy to work used within the cycle. Propulsion system thrust and thrust specific fuel consumption (TSFC) were minimally affected by total pressure losses or thermal energy removal from the core stream. However, total pressure losses in the bypass stream had significant thrust and TSFC penalties. Those penalties were partially offset if core thermal energy is transferred to the bypass stream. Core thermal energy converted to work for use within the engine cycle via a bottoming cycle showed significant thrust and TSFC benefits. In addition to these results, an engine dataset is also being made available. The dataset contains engine conditions (mass flow rate, total temperature and pressure, flow velocities, etc.) at four flight conditions (maximum climb limit, cruise, rolling takeoff and sea level static) that can be used for specific information to guide heat exchanger design to best realize these benefits with further research. The data set is a .csv (comma-separated values) file and is provided as a supplement to this report (available online from www.sti.nasa.gov).

propulsion↗

NASA NTRSDate not supplied

Internal Layout of a Lunar Surface Habitat

NASA is currently developing concepts for sustained crewed missions to the lunar surface. Sustained missions will occur on annual basis for durations of 30 days or more. To house and support the crew, NASA is exploring the use of a lunar Surface Habitat. NASA relies on conceptual spacecraft design to assist in planning and mission analysis. A crucial component of this habitation design is the internal layout: the interior location of systems, workstations, crew quarters, etc. The purpose of this paper is to describe the process and resulting layout of a specific Surface Habitat design. This paper describes the SH’s hybrid inflatable structure then details the habitat’s interior layout. The proposed SH’s internal layout is depicted inside a hybrid inflatable structure using a low-fidelity CAD model. Multiple NASA references were consulted to determine the SH’s required functionality, minimal Net Habitable Volume, and minimal functional dimensions. These functions and volumes contribute to the placement and location of systems and spaces inside the habitat. In addition to functional volume, the layout includes systems and logistics placement. The resulting design will aid NASA in mission planning and further systems analysis.

Callie Burke↗

NASA NTRS2020

Common Origin of Warm Dark Matter and Dark Radiation

We consider a cosmological scenario where a relativistic particle and a stable massive particle are simultaneously produced from the decay of a late-decaying particle after Big-Bang Nucleosynthesis but before matter-radiation equality. The relativistic and massive particles behave as dark radiation and warm dark matter, respectively. Due to a common origin, the warmness and abundances are closely related. We refer to the models that lead to such a scenario as Common Origin of Warm and Relativistic Decay Products (COWaRD). We show that COWaRD predicts a correlation between the amount of dark radiation and suppression of the large scale structure, which can be tested in future precision cosmology observations. We demonstrate that COWaRD is realized, as an example, in a class of supersymmetric axion models and that future observations by the next generation Cosmic Microwave Background, Large Scale Structure, and 21-cm surveys can reveal the structure of the theory.

Manuel A. Buen-Abad↗

NASA NTRSDate not supplied

Conversion of Environment Files from ORDEM 3 & MEM 3 to STENVI

To perform Micrometeoroid and Orbital Debris (MMOD) analyses, NASA describes the orbital debris particle environment using the ORDEM 3 tool and the micrometeoroid environment using the MEM 3 tool. Both output files that detail the flux of particles as a function of several parameters. European MMOD analyses use different tools to perform similar functions, including the Meteoroid And Space debris Terrestrial Environment Reference (MASTER) environment model, which outputs flux data in the Standard Environment Interface (STENVI) format. The NASA Johnson Space Center Hypervelocity Impact Technology Group was asked to create a converter to translate flux data from the output file formats used by ORDEM 3.x and MEM 3 into the STENVI file format. Validation was performed to ensure that the converter was reproducing the input data correctly. The Bumper 3 MMOD risk assessment tool has a capability for reading ORDEM 3.x, MEM 3, and STENVI environment file formats and was used to compare MMOD risk results generated using the converter’s output STENVI files to the risk results generated using the input ORDEM 3.x and MEM 3 igloo files. Specific point comparisons validated that the converter translated the environment data correctly, producing the intended output. However, realistic risk assessments showed that the bin methodology employed by Bumper for determining particle flux as a function of particle size when reading files in STENVI format produces much higher MMOD risk than the point-interpolation methodology used in Bumper risk assessments using ORDEM and MEM. Modifications to how Bumper 3 reads STENVI files during analyses are considered to improve Bumper’s ability to perform useful analyses with environment files in this format.

STENVI↗

NASA NTRS2023

Conversion of ORDEM 3.X & MEM 3 Into STENVI File Format

To perform Micrometeoroid and Orbital Debris (MMOD) analyses, NASA describes the orbital debris particle environment using the ORDEM 3 tool and the micrometeoroid environment using the MEM 3 tool. Both output files that detail the flux of particles as a function of several parameters. European MMOD analyses use different tools to perform similar functions, including the Meteoroid And Space debris Terrestrial Environment Reference (MASTER) environment model, which outputs flux data in the Standard Environment Interface (STENVI) format. The NASA Johnson Space Center Hypervelocity Impact Technology Group was asked to create a converter to translate flux data from the output file formats used by ORDEM 3.x and MEM 3 into the STENVI file format. Validation was performed to ensure that the converter was reproducing the input data correctly. The Bumper 3 MMOD risk assessment tool has a capability for reading ORDEM 3.x, MEM 3, and STENVI environment file formats and was used to compare MMOD risk results generated using the converter’s output STENVI files to the risk results generated using the input ORDEM 3.x and MEM 3 igloo files. Specific point comparisons validated that the converter translated the environment data correctly, producing the intended output. However, realistic risk assessments showed that the bin methodology employed by Bumper for determining particle flux as a function of particle size when reading files in STENVI format produces much higher MMOD risk than the point-interpolation methodology used in Bumper risk assessments using ORDEM and MEM. Modifications to how Bumper 3 reads STENVI files during analyses are considered to improve Bumper’s ability to perform useful analyses with environment files in this format.

STENVI↗

NASA NTRSDate not supplied

A Discussion of Time Management Concepts and Time Constraint Equations for Multi-Rate Federation Executions

The High Level Architecture (HLA) is a simulation interoperability standard developed by the Simulation Interoperability Standards Organization (SISO) and published as the international standard IEEE 1516-2010 by the Institute for Electrical and Electronics Engineers (IEEE). HLA is a widely used standard for the development and execution of collaborative distributed simulations. HLA provides a number of Management Services to simulation developers: Federation, Declaration, Object, Ownership, Data Distribution, and Time. Of those services, Time Management Services is probably one of the least understood and least used. However, Time Management Services are critical to technical simulations like those created for space systems using the Space Reference Federation Object Model (SpaceFOM). Time Management can be used to insure data coherence and execution repeatability in distributed simulations. When combined with real time execution policies, Time Management is being used to support real time execution of mixed software and hardware in the loop integration, verification, and validation simulations for active space systems development. This paper starts by providing an overview of the HLA Time Management Services. This provides the background to discuss the challenges associated with Time Management and its use, starting with simple common rate frame scheduled simulations, then simple multi-rate simulations, and ending with complex mixed rate simulations. The authors then formulate the significant time constraint relationships between identified frame scheduling parameters. The intent of the paper is to provide a concise discussion of how to use Time Management in both simple cases and in more complex mixed frame rate federation executions.

Simulation Interoperability↗

NASA NTRSDate not supplied

A Discussion of Time Management Concepts and Time Constraint Equations for Multi-Rate Federation Executions

The High Level Architecture (HLA) is a simulation interoperability standard developed by the Simulation Interoperability Standards Organization (SISO) and published as the international standard IEEE 1516-2010 by the Institute for Electrical and Electronics Engineers (IEEE). HLA is a widely used standard for the development and execution of collaborative distributed simulations. HLA provides a number of Management Services to simulation developers: Federation, Declaration, Object, Ownership, Data Distribution, and Time. Of those services, Time Management Services is probably one of the least understood and least used. However, Time Management Services are critical to technical simulations like those created for space systems using the Space Reference Federation Object Model (SpaceFOM). Time Management can be used to insure data coherence and execution repeatability in distributed simulations. When combined with real time execution policies, Time Management is being used to support real time execution of mixed software and hardware in the loop integration, verification, and validation simulations for active space systems development. This paper starts by providing an overview of the HLA Time Management Services. This provides the background to discuss the challenges associated with Time Management and its use, starting with simple common rate frame scheduled simulations, then simple multi-rate simulations, and ending with complex mixed rate simulations. The authors then formulate the significant time constraint relationships between identified frame scheduling parameters. The intent of the paper is to provide a concise discussion of how to use Time Management in both simple cases and in more complex mixed frame rate federation executions.

Simulation Interoperability↗

NASA NTRS1989

Multiprocessor performance modeling with ADAS

A graph managing strategy referred to as the Algorithm to Architecture Mapping Model (ATAMM) appears useful for the time-optimized execution of application algorithm graphs in embedded multiprocessors and for the performance prediction of graph designs. This paper reports the modeling of ATAMM in the Architecture Design and Assessment System (ADAS) to make an independent verification of ATAMM's performance prediction capability and to provide a user framework for the evaluation of arbitrary algorithm graphs. Following an overview of ATAMM and its major functional rules are descriptions of the ADAS model of ATAMM, methods to enter an arbitrary graph into the model, and techniques to analyze the simulation results. The performance of a 7-node graph example is evaluated using the ADAS model and verifies the ATAMM concept by substantiating previously published performance results.

Hayes, Paul J.↗

NASA NTRS1986

An IBM PC-based math model for space station solar array simulation

This report discusses and documents the design, development, and verification of a microcomputer-based solar cell math model for simulating the Space Station's solar array Initial Operational Capability (IOC) reference configuration. The array model is developed utilizing a linear solar cell dc math model requiring only five input parameters: short circuit current, open circuit voltage, maximum power voltage, maximum power current, and orbit inclination. The accuracy of this model is investigated using actual solar array on orbit electrical data derived from the Solar Array Flight Experiment/Dynamic Augmentation Experiment (SAFE/DAE), conducted during the STS-41D mission. This simulator provides real-time simulated performance data during the steady state portion of the Space Station orbit (i.e., array fully exposed to sunlight). Eclipse to sunlight transients and shadowing effects are not included in the analysis, but are discussed briefly. Integrating the Solar Array Simulator (SAS) into the Power Management and Distribution (PMAD) subsystem is also discussed.

Emanuel, E. M.↗

NASA NTRS1982

The use of baseline measurements and geophysical models for the estimation of crustal deformations and the terrestrial reference system

Four possible estimators are investigated for the monitoring of crustal deformations from a combination of repeated baseline length measurements and adopted geophysical models, particularly an absolute motion plate model. The first estimator is an extension of the familiar free adjustment. The next two are Bayesian type estimators, one weak and one strong. Finally, a weighted constraint estimator is presented. The properties of these four estimators are outlined and their physical interpretations discussed. A series of simulations are performed to test the four estimators and to determine whether or not to incorporate a plate model for the monitoring of deformations. The application of these estimations to the maintenance of a new conventional terrestrial reference system is discussed.

Bock, Y.↗

NASA NTRS1991

Anisotropy of thermal infrared exitance above and within plant canopies

Any significant angular dependence of the emitted long wave radiation could result in errors in remotely estimated energy budgets or evapotranspiration. Empirical data and thermal infrared radiation models are reviewed in reference to anisotropic emissions from the plant canopy. The biometeorological aspects of linking longwave models with plant canopy energy budgets and micrometeorology are discussed. A new soil plant atmosphere model applied to anisotropic longwave emissions from a canopy is presented. Time variation of thermal infrared emission measurements is discussed.

Pawu, Kyaw Tha↗

NASA NTRS1992

Development of models for thermal infrared radiation above and within plant canopies

Any significant angular dependence of the emitted longwave radiation could result in errors in remotely estimated energy budgets or evapotranspiration. Empirical data and thermal infrared radiation models are reviewed in reference to anisotropic emissions from the plant canopy. The biometeorological aspects of linking longwave models with plant canopy energy budgets and micrometeorology are discussed. A new soil plant atmosphere model applied to anisotropic longwave emissions from a canopy is presented. Time variation of thermal infrared emission measurements is discussed.

Paw u, Kyaw T.↗

NASA NTRS2015

ISS-CREAM Thermal and Fluid System Design and Analysis

Thermal and Fluids Analysis Workshop (TFAWS), Silver Spring MD NCTS 21070-15. The ISS-CREAM (Cosmic Ray Energetics And Mass for the International Space Station) payload is being developed by an international team and will provide significant cosmic ray characterization over a long time frame. Cold fluid provided by the ISS Exposed Facility (EF) is the primary means of cooling for 5 science instruments and over 7 electronics boxes. Thermal fluid integrated design and analysis was performed for CREAM using a Thermal Desktop model. This presentation will provide some specific design and modeling examples from the fluid cooling system, complex SCD (Silicon Charge Detector) and calorimeter hardware, and integrated payload and ISS level modeling. Features of Thermal Desktop such as CAD simplification, meshing of complex hardware, External References (Xrefs), and FloCAD modeling will be discussed.

Thermal analysis↗