Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “reduced”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Improving AHU Performance by Minimizing Approach Temperature, Reducing Air Maldistribution, and Efficiently Handling Sensible and Latent Loads (Phase 1 Interim Final Technical Report)

Residential air handling units (AHUs) have stayed the same in form and efficiency for the past 30+ years, with incremental improvements made to address safety, functionality, and energy-efficiency. The purpose of this research in Phase I, Topic 9a: Next Generation Residential Air Handlers, was to improve AHU performance by minimizing heat exchanger (HX) approach temperature, reducing air maldistribution, and developing alternative system configurations which more efficiently handle sensible and latent loads. In this research Optimized Thermal Systems (OTS) developed, modeled, and evaluated multiple alternative system concepts. A dual vapor compression system separate sensible and latent cooling (SSLC) concept was studied to inform work on alternative concepts and to show best-case performance benefit. System concepts included ejector enhanced vapor compression cycles, desiccant assisted dehumidification, dual evaporator SSLC, and alternative AHU HX configurations. A dual vapor compression system showed COP improvement of 20%, however, required additional components, increased unit size, and increased cost. Two types of ejector enhanced vapor compression cycles with dual evaporators improved system COP by 9 to 11%, and reduced AHU losses by as much as 18%, with design changes limited to the AHU, no unit physical size increase, and a moderate increase to system first cost. Desiccant assisted air-conditioning required increased air flow rate resulting in higher fan power and the desiccant wheel increased sensible heat load leading to increased compressor power and reduced system COP. Dual evaporator cycles were found to degrade performance due to increased expansion losses. Optimized single slab HX designs used in place of the traditional A-coil HX led to 44–49% reduction in aluminum, 47–60% less refrigerant charge, and improved HX velocity distribution.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

How To Maintain Effective IAEA Safeguards While Reducing Facility Impact

For almost twenty years, inspectors from the International Atomic Energy Agency have been visiting the K-Area Material Storage facility at the Savannah River Site where excess plutonium has been placed under IAEA safeguards as part of the United States Volunatary Offer Agreement. During that time, the mission of K-Area Complex has expanded from storage of nuclear matieral to glovebox operations in support of the National Nuclear Security Administration’s Plutonium Disposition program. With this change in mission, it is becoming increasingly challenging to manage facility staff radiation exposure and operating activities during the IAEA’s annual Physcial Inventory Verifications (PIV). This study has identified both near-term and long-term recommendations for IAEA monitoring protocols that would allow the IAEA to maintain effective safeguards of the material while decreasing the impact to the facility. A statisitical analysis has shown that reducing the number of containers measured during an annual PIV from 12 to 4 still ensures a high level of confidence in the confidence while reducing the inspector time in the facility amd with a corresponding significant reduction in personnel radiation exposure. A modified installation pattern of Remotely Monitored Sealing Arrays (RMSAs) is also proposed utilizing only the outer rows of arrays of stored material containers in the Stack Area (SA). The modified RMSA placement will provide equivalent protection, while significantly reducing personnel radiological exposure, manpower requirements and associated costs. With advances in technology, there are additional potential options in containment/surveillance and continuity of knowledge that would allow the agency to be outside of the facility during PIV measurements and have confidence in the accuracy and authencitity of the results.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Milestone M7 Report: Reducing Excess Data Movement Part 2

This milestone evaluates techniques to measure and, if possible, reduce data movement across all levels of the memory hierarchy, focusing on CPU/GPU page level data movement and on intra-GPU memory hierarchy. We quantitatively evaluate the efficacy of the techniques in reducing data movement and measure how performance tracks data movement reduction. We study a small collection of benchmarks and proxy mini-apps that run on advanced pre-exascale GPUs and on the Accelsim GPU simulator. Our approach has two thrusts: to measure advanced data movement reduction directives and techniques on the newest available GPUs, and to evaluate our benchmark set on simulated GPUs configured with architectural refinements to reduce data movement. We primarily evaluated NVidia-based architectures due to the unavailability of AMD GPU hardware and tools until very recently.

97 MATHEMATICS AND COMPUTING↗

Technology Integration to Gain Commercial Efficiency for the Urban Goods Delivery System, Meet Future Demand for City Passenger and Delivery Load/Unload Spaces, and Reduce Energy Consumption

This three-year project supported by the U.S. Department of Energy Vehicle Technologies Office has the potential to radically improve the urban freight system in ways that help both the public and private sectors. Working from 2018-2021, project researchers at the University of Washington’s Urban Freight Lab and collaborators at the Pacific Northwest National Laboratory have produced key data, tested technologies in complex urban settings, developed a prototype parking availability app, and helped close major knowledge gaps. All the fruits of this project can be harnessed to help cities better understand, support and actively manage truck load/unload operations and their urban freight transport infrastructure. Project learnings and tools can be used to help make goods delivery firms more efficient by reducing miles traveled and the time it takes to complete deliveries, benefitting businesses and residents who rely on the urban freight system for supplies of goods. And, ultimately, these project learnings and tools can be used to make cities more livable by minimizing wasted travel, which, in turn, contributes to reductions in fuel consumption and emissions. Cities today are challenged to effectively and efficiently manage their infrastructure to absorb the impacts of ever-increasing e-commerce-fueled delivery demand. All delivery trucks need to park somewhere to unload and load. Yet today’s delivery drivers have no visibility on available parking until they arrive at a site, which may be full. That means they can wind up cruising for parking, which wastes time and fuel and contributes to congestion. Once drivers do find parking, the faster they can unload at the spot, the faster they free up space for other drivers, helping others avoid circling for parking. This makes the parking space—and thus the greater load/unload network—more productive. To this end, the research team successfully met the project’s three goals, developing and piloting strategies and technologies to: 1. Reduce parking-seeking behavior in the study area by 20%; 2. Reduce parcel truck dwell time (the time a truck spends in a spot to load/unload) in the study area by 30%; 3. Increase curb space, alley space and private loading bay occupancy rates in the study area. The research team met these goals by creating and piloting on Seattle streets OpenPark, a first-of-its-kind real-time and forecasting curb parking app customized for commercial delivery drivers—giving drivers the “missing link” in their commonly used routing tools that tell them how best to get to delivery locations, but not what parking is available to use when they get there. Installing in-ground sensors on commercial vehicle load zones (CVLZs) and passenger load zones (PLZs) in the 10-block study area in Seattle’s downtown neighbourhood of Belltown let researchers glean real-time curb parking data. The research team also met project goals by piloting three parcel lockers in public and private spaces open to any delivery carrier, creating a consolidated delivery hub that lets drivers complete deliveries faster and spend less time parked. Researchers collected and analysed data to produce the first empirical, robust, statistically significant results as to the impact of the lockers, and app, on on-the-ground operations. In addition to collecting and analyzing sensor and other real-time and historical data, researchers rode along with delivery drivers to confirm real-world routing and parking behavior. Researchers also surveyed building managers on their private loading bay operations to understand how to boost usage.

97 MATHEMATICS AND COMPUTING↗

Reducing Memory Consumption in Calico with Shared Memory

This document details the work to reduce memory consumption in Calico. Calico is SimTools’ Constructive Solid Geometry (CSG) and geometry painting library. It is primarily used to paint material volume fractions in the Eulerian meshes of the physics codes. Calico provides point-in-body checks for the geometry supplied by an Oso model, which are then aggregated by the host codes. In addition, Calico can be used to build Oso models and is used by Ingen for that purpose. Oso models, and thus Calico, provide support for various CSG primitives such as spheres, cylinders, surfaces generated by rotating tabular curve data, and STL files as well as binary combinations of those primitives. Prior to refactoring Calico will run out of memory on CTS-1 machines when 36 MPI ranks are used per node when reading STL models on the order of 1.5 GB. This limitation is a bottleneck in designer workflow. This problem has been alleviated through the use of data structures to both reduce memory consumption and to leverage MPI-3 shared memory. This report details the data structures targeted for refactoring in Calico, the methods and implementation details for reducing memory consumption and leveraging shared memory, and results for one test problem. Results show a memory reduction when loading a 1 GB STL file by a factor of 27.5, from 93.4 to 3.4 GB.

97 MATHEMATICS AND COMPUTING↗

Raman Spectroscopy Based On-Line, Real-Time Monitoring to Reduce Composition Uncertainties: Enhanced sensitivity through optimization of Raman Parameters

Optical spectroscopy-based on-line monitoring of Hanford processing streams can enable real-time characterization of chemical composition of process streams and batches, ultimately enabling and enhancing process control. It can provide immediate feedback on process conditions and has the potential to reduce the needed number of grab sample collections, thereby reducing times and costs associated with laboratory processing. Here we discuss the utilization of Raman spectroscopy to quantify multiple target analytes that are common within Hanford tanks and waste processing streams. Analytes include: nitrate, nitrite, carbonate, chromate, sulfate, phosphate, hydroxide, oxalate, ammonia, and aluminate. Most notably in this work, Raman applications to low-concentration streams are explored and optimized. Raman instrument specifications are compared; specifically, the impact of utilizing three different Raman excitation wavelengths, 405, 532, and 671 nm, is discussed. Also, Raman data collection parameters such as collection time and spectral averaging are measured and discussed. Finally, optical libraries of chemical targets were collected using optimized collection parameters and chemometric models were built to automate quantification of chemical targets. These models were validated through application to simulants and real Hanford process samples. Chemometric models performed well on both training and validation sets, suggesting these approaches can be successfully applied to on-line and real-time monitoring of low concentration Hanford processing streams. The use of the combine Raman wave lengths with the enhanced chemometric models for the low concentration streams significantly improved the chemical detection levels and significantly reduced uncertainties of those measurements.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Low-cost Retrofit Kit for Integral Reciprocating Compressors (IRCs) to Reduce Emissions and Enhance Efficiency

Methane emissions from natural gas engines within the oil and gas industry pose a significant environmental challenge, contributing approximately 34.1 MMTCO2 eq to the total of 239 MMTCO2 eq of methane emissions in 2021, according to the EPA report. In response to this pressing issue, a collaborative effort involving the University of Oklahoma and key industry partners—WAGO Automation, Mid Continental Rental, Elipsa, and Perscient—has resulted in the development of a retrofit kit designed to reduce emissions from integral reciprocating compressors (IRCs), which are integrated compressors and engines. The retrofit kit developed comprises an Air Management System (AMS), Integrated Sensors, and a Cloud-Connected Control Unit with Graphical User Interface (GUI)/Human-Machine Interface (HMI). This solution enhances operational efficiency, reduces emissions, and expands the operational envelope of IRCs in the natural gas industry. The project successfully completed all tasks, including the installation of a full-size IRC at a designated site in Oklahoma, the development of an optimized AMS, integration of sensors, and implementation of a data acquisition system. Significant achievements include a notable reduction in CH 4 emissions, up to 84% at specific loads, and the successful deployment of the retrofit kit in diverse field conditions. The system's capabilities were enhanced through the creation of a feedback control algorithm for the AMS using a correlation matrix illustrating relationships between engine parameters, and the design of a predictive and preventive maintenance platform. The project concluded with the deployment of the entire retrofit kit to another location, confirming its effectiveness in reducing emissions and enhancing IRC performance. The comprehensive solution offers valuable benefits for IRCs, making them invaluable assets in the natural gas industry.

03 NATURAL GAS↗

Augmenting the Structural Dynamics Workflow to Reduce Development Times

The success of future systems development at Los Alamos National Laboratory (LANL) depends, in part, on the ability to make informed decisions quickly. This is particularly true when asked to perform structural-mechanical analyses across many design alternatives. To help reduce development time, techniques in reduced-order finite-element modeling (FEM), pretest predictions, and FEM-test correlation and updating were demonstrated in the fiscal year (FY) 23 Technology and Demonstration Project (TED): Augmenting the Structural Dynamics Workflow to Reduce Development Times. This report expands on the TED project final report, LA-UR-34022.

42 ENGINEERING↗

Enabling Technology - Reducing Greenhouse Gas Emissions and Energy Demands in the Meat Production Industry via Scaling Advanced 3D Culture Bioreactors

The project “Enabling Technology - Reducing Greenhouse Gas Emissions and Energy Demands in the Meat Production Industry via Scaling Advanced 3D Culture Bioreactors” focuses on developing transformational and disruptive food technologies, specifically in the area of alternative protein and meat production techniques. The impetus for developing alternative protein technologies include reducing intensive greenhouse gas emissions and energy/land/water usages associated with conventional meat production (animal agriculture). Additional rationales include providing alternatives to livestock rearing as a means of reducing antimicrobial resistance (most antibiotic and antimicrobial use occurs in food-producing animals), as well as the transmission of zoonotic diseases. The goal of this ARPA-E project was to research and develop novel and effective technologies to produce cell-cultured meat (also named in vitro meat, cultivated meat). Cell-cultured meat is an alternative protein or meat technology that involves directly growing muscle and fat tissues (which comprise meat) without using the full animal. This offers benefits in terms of animal welfare (elimination of animal slaughter), while also being projected to be more resource efficient in terms of metrics such as land use and greenhouse gas emissions, especially when compared to beef and lamb. Cell cultured meat additionally offers greater control over the cultivated cells, enabling more precise control over nutrition and taste. For example, cultured cells could be tuned to produce antioxidants such as carotenoids to improve human health. However, to date there are no scalable methods of producing cell-cultured meat cheaply at a large scale.

59 BASIC BIOLOGICAL SCIENCES↗

Use of Sobol’ Variance-Based Global Sensitivity Analysis and Multidimensional Legendre Polynomial Fitting for Reduced Order Modeling

Sandia National Laboratories (SNL) has developed a novel reduced order modeling approach. Prioritization of inputs is accomplished using Sobo' indices obtained through a more efficient variance-based global sensitivity analysis. To determine the Sobo' functions, simulated input values are aligned to collocation points to permit the use of Gauss-Lobatto integration, thereby reducing the number of simulation trials needed by more than an order of magnitude compared to standard Monte Carlo approaches. Furthermore, by leveraging the orthogonality of Legendre polynomials in conjunction with those same simulations at the collocation nodes, an efficient fitting method is developed to represent the Sobo' functions from which a reduced order model (ROM) is constructed. The developed method is both more efficient computationally, and the resulting ROM is more accurate. The efficacy of this technique is demonstrated on a nonlinear polynomial test function as well as the nonlinear Ishigami and Sobo' g functions.

97 MATHEMATICS AND COMPUTING↗

Enhancing Lifetime and Reducing Costs for Fish Diversion Netting Structures (Final Report)

In this effort Pacific Northwest National Laboratory (PNNL) developed and demonstrated an anti-fouling coating that is effective on fish diversion structures. The coating was based on a previously developed superhydrophobic lubricant infused composite (SLIC) coating but modified for application to flexible substrates. We showed that the new reformulated coating – FlexiSLIC – can be applied to flexible fibrous structures to significantly reduce biofouling of netting and anchor lines, to enable longer operational lifetimes, reduced costs, and more reliable operations. The coating developed in this effort was tested on relevant fish diversion structural netting and rope materials (e.g. nylon, Dyneema, polypropylene) to reduce biofouling. Engagement with industry in the development and demonstration further supported progress toward commercialization of the materials.

36 MATERIALS SCIENCE↗

Reduced Order Model for Guided Wave Propagation on Gas Pipelines to Enable Real-Time Simulation

Reduced order model for simulation of Guided wave propagation is presented here. The utilization of reduced order models ensures efficient data generation for a variety of parameters where it takes huge computational effort to simulate, crucial for timely monitoring and decision-making. Autoencoder based reduced order models are proposed here, which are trained on simulated data from open-source finite element framework, Firedrake.

Bukka, Sandeep Reddy↗

Reducing Mass of Steel Auto Bodies using Thin Advanced High Strength Steel with Carbon-Fiber Reinforced Epoxy

Diversitak, a company based in Detroit, MI, has developed a proprietary, low specific gravity, carbon fiber-reinforced epoxy (CFRE) under U.S. patent number 9,963,58832. Preliminary testing on this new material conducted in collaboration with ArcelorMittal Steel Company proved out the CFRE concept. A thin layer of this CFRE was applied to a stamped sheet of steel with residual stamping oils from a mill, in a time corresponding to automotive processing (e.g., ~15 seconds), and processed following automotive e-coat procedures (phosphating + 175–200°C heating), to complete the curing. No problems with adherence or performance were noted. While the CFRE does add weight to a thin gauge steel panel, it weighs much less than what is displaced by using thicker conventional mild steel gauges. The application of the coating showed a significant increased dent resistance, oil canning resistance, and part stiffness.This current two-year project was designed to mature this new technology to near manufacturing readiness to reduce the weight of a vehicle and lower the cost of weight reduction. The process involves the use of thinner gauge steels than are currently used. The collaborative development team included two industrial manufacturers: Diversitak and ArcelorMittal Steel Company; LightMAT; and two National Laboratories: Oak Ridge National Laboratory (ORNL) and Idaho National Laboratory (INL). The team developed a new manufacturing process to reduce the weight of a vehicle and lower the cost of weight reduction, as well as a better understanding of how to apply the coating so that it will perform to a high standard in-service. The team also performed an in-depth study to determine the long-term durability of the materials manufactured using this technology and well-known automotive industry standard tests.The overall process involved stiffening the thinner gauge steel by applying the CFRE on only one side. To accomplish this goal, the optimal reinforcement fiber length and fiber concentration was first determined. This was followed by measuring the coefficient of thermal expansion (CTE) in all three directions, so it could be fed into manufacturing models and methods for rapidly and inexpensively applying the coating. This was followed by panel level evaluations of the coating and steel combination, and then by full part demonstration of the technology on door panels. The final step was corrosion testing of the parts.ArcelorMittal characterized the advanced high strength steel (AHSS) (e.g., metallurgy-heat treatment for required AHSS properties as a function of the sheet thickness, state of internal stress) and quantified CFRE adhesion to the steel as a function of sheet preparation (e.g., rolling and stamping).ORNL optimized the fiber length, fiber concentration, and coating thickness for best vehicle function and performance at the least cost. Along with the suppliers, ORNL developed a durable CFRE application process (e.g., gun material, design, robotic dispensing process) and identified the adhesion stability of the CFRE during process holding. An approach to ensure that application/curing timing conforms to conventional assembly line speed and plant cycle times was determined. ORNL also determined the CTE of the material in all three directions and performed material scanning electron microscopy (SEM) analyses.INL characterized the corrosion properties of the steel panels coated with CFRE. The panels were investigated for corrosion resistance and stability as replacement materials used in automotive body panels to reduce mass. The coupons tested at INL were supplied by Diversitak after an optimized CFRE formulation was achieved in the already coated form for corrosion testing.

99 GENERAL AND MISCELLANEOUS↗

Characterization and Stimulation of Selenium Reducing Microbial Consortia from Real Flue Gas Desulfurization Wastewater Biological Treatment System

Selenium is released into the environment via anthropogenic activities such as coal combustion. The U.S. Environmental Protection Agency’s Effluent Limitation Guideline (ELG) Rule limits the release of selenium species into U.S. waterways. To meet the ELG limit for selenium, coal-fired power plants must treat the wastewater produced by the flue gas desulfurization (FGD) systems. Selenium removal is of interest because small changes of the concentrations of selenium in the environment can cause detrimental ecological consequences. Biological treatment is used to remediate this wastewater, but little is known about the individual species in the microbial consortium that reduce toxic water-soluble selenium oxyanions to insoluble elemental selenium. To optimize current biological treatment capabilities of this water, the selenium-reducing capabilities must be leveraged. In order to do so, the selenium-reducing bacteria (SeRB) in biological treatment systems must be characterized. This study will be the first to characterize the microbial consortia from a real FGD WW biological treatment system and provide insights on how to better achieve selenium removal via biological treatment. This work will provide insights into the microorganisms predominantly responsible for the reduction of selenium oxyanions in FGD wastewater biological treatment systems, which can be used to better optimize more efficient biological treatment strategies of this industrial waste.

geomicrobiology↗

Reduced order modeling of fluid/structure interaction.

This report describes work performed from October 2007 through September 2009 under the Sandia Laboratory Directed Research and Development project titled 'Reduced Order Modeling of Fluid/Structure Interaction.' This project addresses fundamental aspects of techniques for construction of predictive Reduced Order Models (ROMs). A ROM is defined as a model, derived from a sequence of high-fidelity simulations, that preserves the essential physics and predictive capability of the original simulations but at a much lower computational cost. Techniques are developed for construction of provably stable linear Galerkin projection ROMs for compressible fluid flow, including a method for enforcing boundary conditions that preserves numerical stability. A convergence proof and error estimates are given for this class of ROM, and the method is demonstrated on a series of model problems. A reduced order method, based on the method of quadratic components, for solving the von Karman nonlinear plate equations is developed and tested. This method is applied to the problem of nonlinear limit cycle oscillations encountered when the plate interacts with an adjacent supersonic flow. A stability-preserving method for coupling the linear fluid ROM with the structural dynamics model for the elastic plate is constructed and tested. Methods for constructing efficient ROMs for nonlinear fluid equations are developed and tested on a one-dimensional convection-diffusion-reaction equation. These methods are combined with a symmetrization approach to construct a ROM technique for application to the compressible Navier-Stokes equations.

42 ENGINEERING↗

Assessing the Impacts of Reduced Noise Operations of Wind Turbines on Neighbor Annoyance: A Preliminary Analysis in Vinalhaven, Maine

Neighbors living near the 3 turbine, 4.5 MW Vinalhaven, Maine wind power facility, which began operations in late 2009, have complained that the noise from the turbines is unwelcome and annoying. Fox Islands Wind, the owner of the facility, hypothesized that implementing a Noise Reduced Operation (NRO) for the turbines, which effectively limits the turbines maximum rpm and power output, would reduce the sound levels produced by the turbines, and therefore might also reduce the degree to which the neighbors report being annoyed by those sounds. To test this hypothesis in a preliminary fashion, a pilot study was conducted in early 2010, the results of which are the subject of this brief report. The study included asking near-by residents - those within roughly 3000 feet - to rate the sounds and the degree to which they were annoyed by them using logs which they filled out at multiple times during the day on as many days as were possible in the 35 day study period in February and March, 2010. Meanwhile, FIW adjusted the NRO settings of the turbines in a random fashion in the evenings during the same period, but in a pattern that the respondents were not made aware of. Ultimately, nine individuals turned in roughly 200 log entries (i.e., responses), each of which was time coded to allow testing if the response was correlated with the wind facility operating conditions at that time. The analysis of these data found small, non-statistically-significant differences in self-reported turbine loudness and annoyance ratings between the periods when the NRO was enacted and when it was not, after controlling for many of the relationships that could independently influence perceived loudness and annoyance (e.g., wind direction, time of day). Possible explanations for these small differences in self-reported turbine loudness and annoyance ratings include: the relative difference in sound output from the turbines when NRO was engaged and when it was not was small; and/or that differences in turbine sound outputs that did exist might have been masked by higher (non-turbine) wind sound levels that were coincident with NRO periods. Because this preliminary test only included a small portion of the population surrounding the turbines, the sample of self-reported ratings was itself very small. In addition, the conditions varied greatly over the study period, as described in the report that follows. Consequently, the results presented here should be considered preliminary, and further data collection and analysis are warranted. The main findings of this preliminary study are: (1) As planned, periods in which the NRO was engaged were found to have noticeably lower turbine rotational speeds (rpm), based on turbine operational data. (2) 11% of responses overall indicated that the turbines were perceived as either 'very' or 'extremely' loud at the time they were logged, and roughly two thirds of those (7% overall) indicated the sounds to be 'very' or 'extremely' annoying. (3) Self-reported turbine loudness and annoyance ratings were higher during the night and when the wind was from the North (participants in the study were located to the east and south of the turbines). (4) Self-reported turbine loudness and annoyance ratings were generally found to be lower during the NRO periods, but these observed differences are relatively small in magnitude, and are not statistically significant. (5) There is some limited evidence that high-speed surface winds mask self-reported turbine loudness and annoyance ratings. Therefore, because NRO settings are only engaged during periods of high winds, the true effects of the NRO adjustments might be diluted to some degree. (6) The results of this preliminary assessment should not be applied to the full population of homeowners near the turbines in Vinalhaven, Maine because the potentially most-sensitive individuals (those most vocal of their dislike of the turbine sounds) opted not to participate in the study, and because the study did not include the relatively large number of individuals who primarily visit the island during the summer months.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

A Study of the Impact of Reduced Inertia in Power Systems

Inertia in power systems plays an important role in maintaining the stability and reliability of the system by counteracting changes in frequency. However, the traditional sources of synchronous generation are being displaced by renewable resources, which often have no inherent inertia. This paper investigates the impact of reduced system inertia on several aspects of the dynamic stability of power systems, such as angular stability, primary frequency response, and oscillatory modes. This study is performed on a large-scale 2000 bus synthetic Texas model by selectively replacing synchronous generators with inverter-based generation resources. This paper also compares the analysis results obtained by the above-mentioned inertia-reduction approach of renewable integration with another approach in which the inertia constant of all synchronous generators is decreased. This paper demonstrates that only reducing the inertia of all synchronous generators in a system does not provide an accurate analysis of the challenges associated with the reduced system inertia caused by renewable integration.

System Inertia, Angular stability, System Inertial↗

Development of PWHT-Free, Reduced Activation Creep-Strength Enhanced Bainitic Ferritic Steel for Large-Scale Fusion Reactor Components

A compositional modification has been proposed to validate an alloy design which potentially eliminates the requirement of post-weld heat treatment (PWHT) while preserving the advantage of mechanical properties in a reduced activation bainitic ferritic steel based on Fe-3Cr-3W-0.2V- 0.1Ta-Mn-Si-C, in weight percent, developed at Oak Ridge National Laboratory in 2007. The alloy design includes reducing the hardness in the as-welded condition for improving toughness, while increasing the hardenability for preserving the high-temperature mechanical performance such as creep-rupture resistance in the original steel. To achieve such a design, a composition range with a reduced C content combining with an increased Mn content has been proposed and investigated. Newly proposed “modified” steel successfully achieved an improved impact toughness in the as- welded condition, while the creep-rupture performance across the weldments without PWHT demonstrated ~50% improvement of the creep strength compared to that of the original steel weldment after PWHT. The obtained results strongly support the validity of the proposed alloy design.

Yamamoto, Yukinori↗