Identification of the Formal +2 Oxidation State of Plutonium: Synthesis and Characterization of {Pu II [C 5 H 3 (SiMe 3 ) 2 ] 3 } -
Explore the source record for details and available documents.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
We report the PuIII complex, [PuIII(CpMe4)3] (1-Pu), and demonstrate its differences in small molecule reactivity compared to the UIII and SmIII analogs, [UIII(CpMe4)3] (1-U) and [SmIII(CpMe4)3] (1-Sm), respectively. 1-Pu reductively cleaves the small molecule (PhS)2, affording a PuIII complex, [{PuIII(CpMe4)2}2(μ-SPh)2] (2-Pu), while retaining the PuIII center and eliminating (CpMe4)2 as a by-product, a fingerprint of a sterically induced reduction (SIR) reaction. Sm is often used as a surrogate for Pu, but the analogous [SmIII(CpMe4)3], (1-Sm), is unreactive. The (PhS)2 cleavage by 1-U proceeds solely via a metal-based oxidation (i.e., UIII → UIV), to form [UIV(CpMe4)3(SPh)] (3-U). Only 1-U reacts with (PhHN)2, affording the reductive cleavage product, [UIV(CpMe4)3(NHPh)] (4-U). The difference in reactivity of 1-Pu compared to complexes 1-Sm and 1-U was unexpected, and since SIR chemistry can enable complexes to participate in otherwise impossible reductive transformation of substrates, this reinforces the importance of studying small molecule reactivity with the transuranic elements.
Solvent exchange of NpCl 4 (DME) 2 with THF proceeds simply to yield NpCl 4 (THF) 3 , whereas PuCl 4 (DME) 2 is unstable in THF, partially decomposing to the mixed valent [Pu III Cl 2 (THF) 5 ][Pu IV Cl 5 (THF)] salt. Reduction of NpCl 4 (THF) 3 with CsC 8 ultimately afforded NpCl 3 (py) 4 , the only example of a structurally characterized solvated Np(III) halide. In conclusion, the method demonstrates a route to a well-defined Np(III) starting material without the need to employ scarcely available Np metal.
Here complexation of Pu(IV) with the actinide extractant CyMe 4 -BTPhen (2,9-bis(5,5,8,8-tetramethyl-5,6,7,8-tetrahydro-1,2,4-benzotriazin-3-yl)-1,10-phenanthroline) was followed by vis-NIR spectroscopy in acetonitrile solution. The solid-state structure of the crystallized product suggests that Pu(IV) is reduced to Pu(III) upon complexation. Analysis by DFT modeling is consistent with metal-based rather than ligand-based reduction.
The magnetic structure of PuO 2 has been investigated by computational methods. A hereto unknown longitudinal 3k AFM ground-state that retains $Fm\bar{3}m$ crystal symmetry has been identified.
A series of trivalent f-block tungstates, MW 2 O 7 (OH)(H 2 O) (M = La, Ce, Pr, Nd, and Pu) and AmWO 4 (OH), have been prepared in crystalline form using hydrothermal methods. Both structure types take the form of 3D networks where MW 2 O 7 (OH)(H 2 O) is assembled from infinite chains of distorted tungstate octahedra linked by isolated MO 8 bicapped trigonal prisms; whereas AmWO 4 (OH) is constructed from edge-sharing AmO 8 square antiprisms connected by distorted tungstate trigonal bipyramids. PuW 2 O 7 (OH)(H 2 O) crystallizes as red plates; an atypical color for a Pu( III ) compound. Optical absorption spectra acquired from single crystals show strong, broadband absorption in the visible region. A similar feature is observed for CeW 2 O 7 (OH)(H 2 O), but not for AmWO 4 (OH). Here we demonstrate that these significantly different optical properties do not stem directly from the 5f electrons, as in both systems the valence band has mostly O-2p character and the conduction band has mostly W-5d character. Furthermore, the quasi-particle gap is essentially unaffected by the 5f degrees of freedom. Despite this, our analysis demonstrates that the f-electron covalency effects are quite important and substantially different energetically in PuW 2 O 7 (OH)(H 2 O) and AmWO 4 (OH), indicating that the optical gap alone cannot be used to infer conclusions concerning the f electron contribution to the chemical bond in these systems.
The utilization of machine learning techniques has become commonplace in the analysis of optical emission spectra. These methods are often limited to variants of principal components analysis (PCA), partial-least squares (PLS), and artificial neural networks (ANNs). A plethora of other techniques exist and are well established in the world of data science, yet are seldom investigated for their use in spectroscopic problems. In this study, machine learning techniques were used to analyze optical emission spectra of laser-induced plasma from ceria pellets doped with silicon in order to predict silicon content. Additionally, a boosted regression ensemble model was created, and its predictive accuracy was compared to that of traditional PCA, PLS, and ANN regression models. Boosted regression tree ensembles yielded fits with R-squared (R2) values as high as 0.964 and mean-squared errors of prediction (MSEPs) as low as 0.074, providing the most accurate predictive model. Neural networks performed with slightly lower R2 values and higher MSEPs compared to the ensemble methods, thus indicating susceptibility to overfitting.
New coordination environments are reported for Np(III) and Pu(III) based on pilot studies of U(III) in 2.2.2-cryptand (crypt). The U(III)-in-crypt complex, [U(crypt)I 2 ][I], obtained from the reaction between UI 3 and crypt, is treated with Me 3 SiOTf (OTf = O 3 SCF 3 ) in benzene to form the [U(crypt)(OTf) 2 ][OTf] complex. Similarly, the isomorphous Np(III) and Pu(III) complexes were obtained similarly starting from [AnI 3 (THF) 4 ]. All three complexes (1-An; An = U, Np, Pu) contain an encapsulated actinide in a THF-soluble complex. Finally, absorption spectroscopy and DFT calculations are consistent with 5f 3 U(III), 5f 4 Np(III), and 5f 5 Pu(III) electron configurations.
The coordination of crystalline products resulting from the co-crystallization of Np(VI), Pu(VI), Am(VI), and Np(V) with uranyl nitrate hexahydrate (UNH) has been revealed through solid-state spectroscopic characterization via diffuse reflectance UV-Vis-NIR spectroscopy, SEM-EDS, and extended X-ray absorption fine structure (EXAFS) spectroscopy. Density functional and multireference wavefunction calculations were performed to analyze the An(VI/V)O 2 (NO 3 ) 2 ·2H 2 O electronic structures and to help assign the observed transitions in the absorption spectra. EXAFS show a similar coordination between the U(VI) in UNH and Np(VI) and Pu(VI); while Am resulted in a similar coordination to Am(III), as reduction of Am(VI) occurred prior to EXAFS data being obtained. Finally, the co-crystallization of the oxidized transuranic species—penta- and hexavalent—with UNH, represents a significant advance from not only a practical standpoint in providing an elegant solution for used nuclear fuel recycle, but also as an avenue to expand the fundamental understanding of the 5f electronic behavior in the solid-state.
The coordination of crystalline products resulting from the co-crystallization of Np(VI), Pu(VI), Am(VI), and Np(V) with uranyl nitrate hexahydrate (UNH) has been revealed through solid-state spectroscopic characterization via diffuse reflectance UV-Vis-NIR, SEM-EDS, and extended X-ray absorption fine structure (EXAFS). Density functional and multireference wavefunction calculations were performed to analyze the An(VI/V)O 2 (NO 3 ) 2 ·2H 2 O electronic structures and to help assign the observed transitions in the absorption spectra. EXAFS show a similar coordination between the U(VI) in UNH and Np(VI) and Pu(VI); while Am resulted in a similar coordination to Am(III), as reduction of Am(VI) occurred prior to EXAFS data being obtained. Here, the co-crystallization of the oxidized transuranic species—penta- and hexavalent—with UNH, represents a significant advance from not only a practical standpoint in providing an elegant solution for used nuclear fuel recycle, but also as an avenue to expand the fundamental understanding of the 5f electronic behavior in the solid-state.
This paper presents a novel and rapid, wet chemistry technique for spectroscopically detecting trace (∼10 −3 Bq mL −1 ) level alpha emitting radionuclides mixtures with under 10 keV alpha energy resolution – with 100% gamma–beta rejection.
The coordination modes and electronic properties of a strongly coordinating hydroxylaminato ligand with Np, Pu and Am were investigated.Complexes were characterized by a range of experimental and computational techniques.
σ-Hydrocarbyl complexes of the form [M(η 5 -PC 4 Me 4 ) 2 (μ-η 1 :η 6 -CH 2 Ph) 2 K(η 6 -arene)] (M = La, Ce, Pr, U, Np, Pu; arene = benzene or toluene) were synthesised in one-pot reactions from [MI 3 (THF) 4 ], or [U(BH 4 ) 3 (toluene)] (M = U). All complexes were examined by multinuclear ( 1 H, 13 C{ 1 H}, 31 P{ 1 H}) NMR and UV-vis-NIR spectroscopy, as well as single-crystal X-ray diffraction from which molecular metal–phosphorus bonds for Np and Pu, and a σ-hydrocarbyl metal–carbon bond for Pu, have been structurally authenticated.
Uranium interference is a major problem in conventional 238 Pu analysis. In RIMS, a slight detuning of the resonance laser extinguishes the Pu signal so that the 238 U interference can be accurately quantified and subtracted.
The accuracy and precision of isotope amount ratio measurements using thermal ionization mass spectrometry (TIMS) instrumentation are described, and the measurement of Pu materials is emphasized. The mass fractionation observed for Am, Ga, Pu, and U for isotope amount ratio measurements using the total evaporation (TE) technique is compared with theoretical estimates to demonstrate the advantage of the TE methodology and to investigate systematic biases in the major isotope amount ratios of U and Pu certified reference material (CRM) standards from the U.S. provider of CRMs. The quality of the Pu isotopic data generated by TIMS instruments in an analytical laboratory is demonstrated by the application of the double ratio technique to estimate the 241 Pu half-life. Analytical data on traceable Pu CRMs from the New Brunswick Laboratory (NBL), generated as part of routine measurements supporting various programs, are used for this half-life estimation. Although the 241 Pu abundances in CRMs of 136, 137, 138, and 126-A are approximately 200–2000× smaller than those in the 241 Pu material used in the previous Institute for Reference Materials and Measurements (IRMM) evaluation of the 241 Pu half-life, the half-life value estimated in this work shows excellent agreement with the currently accepted value from the IRMM. This agreement also demonstrates the pedigree of the Pu isotopic standards from the NBL and the quality of the isotope amount ratio measurements using TIMS instrumentation. For both the major and minor Pu isotope amount ratios, this report describes the relative importance of the factors affecting the uncertainty of TIMS measurements, which are considered the gold standard in isotope ratio measurements (LA-UR-24-29199).
Not Available
An alternative target design with potential improvements, including a major increase in 238 Pu production rate and annual capacity; fewer targets to be fabricated, irradiated, and processed; and a significant replacement of a large volume of caustic-nitrate, aluminum-bearing radioactive liquid waste with a smaller volume of solid metal waste, has been conceived and evaluated using reactor physics and thermal-hydraulic analyses. The alternative target design uses pressed pellets of 237 NpO 2 , sintered to 92% to 93% of theoretical density, and stacked inside a Zircaloy-4 cladding tube. Additionally, four test targets were fabricated, irradiated, and examined. No melting or other potential problems were indicated. Projections from measured constituents indicated annual production could be increased by a factor of ~2, and the number of targets required to be fabricated, irradiated, and processed could be reduced by a factor of ~5.