Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phase field”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Reaction Heterogeneity in LiFePO 4 Agglomerates and the Role of Intercalation-Induced Stress

As an important battery cathode material, reaction distribution in lithium iron phosphate (LiFePO4) has been extensively studied in dispersed particle systems, but remains poorly understood for mesoscopic agglomerates (or secondary particles) that are used in most commercial batteries. Herein, we apply three-dimensional X-ray spectroscopic imaging to characterize the two-phase structure in LiFePO4 secondary particles during electrochemical cycling. (De)lithiated domains are found to not form the commonly assumed core-shell structure but develop highly anisotropic filamentary morphology that is rate independent and symmetric between charging and discharging. Phase-field simulations elucidate that the observed 1D phase growth behavior is not caused by the 1D lithium diffusivity of LiFePO4 but the elastic interaction between primary particles, which gives rise to stronger reaction heterogeneity than dispersed nanoparticles. As a result, uniform lithium (de)intercalation does not occur on the secondary particle surface even at high cycling rates.

36 MATERIALS SCIENCE↗

Nonlinear phase bores in drift wave-zonal flow dynamics

A minimal model of nonlinear phase dynamics in drift waves is shown to support phase bore solutions. Coupled nonlinear equations for amplitude, phase, and zonal flow are derived for the Hasegawa-Mima system and specialized to the case of spatiotemporally constant amplitude. In that limit, phase curvature (finite second derivative of the phase with respect to the radius) alone generates propagating shear flows. The phase field evolves nonlinearly by a competition between phase steepening and dispersion. The analytical solution of the model reveals that the phase bore solutions so obtained realize the concept of a phase slip in a concrete dynamical model of drift wave dynamics. Here, the implications for phase turbulence are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Magnetic ordering in the frustrated J 1 - J 2 Ising chain candidate BaNd 2 O 4

The AR 2 O 4 family (R = rare earth) has recently been attracting interest as a new series of frustrated magnets, with the magnetic R atoms forming zigzag chains running along the c axis. In this paper, we have investigated polycrystalline BaNd 2 O 4 with a combination of magnetization, heat-capacity, and neutron powder diffraction measurements. Magnetic Bragg peaks are observed below T N = 1.7 K, and they can be indexed with a propagation vector of k = (0,1/2,1/2). The signal from magnetic diffraction is well described by long-range ordering of only one of the two types of Nd zigzag chains, with collinear up-up-down-down intrachain spin configurations (double Néel state). Furthermore, low-temperature magnetization and heat-capacity measurements reveal two magnetic-field-induced spin transitions at 2.75 and 4 T for T = 0.46 K. The high-field phase is paramagnetic, while the intermediate-field state may arise from a spin transition of the long-range ordered Nd chains. Finally, one possible candidate for the field-induced ordered state corresponds to an up-up-down intrachain spin configuration, as predicted for a classical J 1 -J 2 Ising chain with a double Néel ground state in zero field.

36 MATERIALS SCIENCE↗

Thermodynamic coarsening arrested by viscous fingering in partially miscible binary mixtures

We view the evolution of binary mixtures far from equilibrium, and demonstrate that the interplay between phase separation and hydrodynamic instability can arrest the Ostwald ripening process characteristic of nonflowing mixtures. We describe a model binary system in a Hele-Shaw cell using a phase-field approach with explicit dependence of both phase fraction and mass concentration. When the viscosity contrast between phases is large (as is the case for gas and liquid phases), an imposed background flow leads to viscous fingering, phase branching, and pinch off. This dynamic flow disorder limits phase growth and arrests thermodynamic coarsening. Because of this, the system reaches a regime of statistical steady state in which the binary mixture is permanently driven away from equilibrium.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electric field control of chirality

Polar textures have attracted substantial attention in recent years as a promising analog to spin-based textures in ferromagnets. Here, using optical second-harmonic generation–based circular dichroism, we demonstrate deterministic and reversible control of chirality over mesoscale regions in ferroelectric vortices using an applied electric field. The microscopic origins of the chirality, the pathway during the switching, and the mechanism for electric field control are described theoretically via phase-field modeling and second-principles simulations, and experimentally by examination of the microscopic response of the vortices under an applied field. The emergence of chirality from the combination of nonchiral materials and subsequent control of the handedness with an electric field has far-reaching implications for new electronics based on chirality as a field-controllable order parameter.

36 MATERIALS SCIENCE↗

Solidification microstructures and solid-state parallels: Recent developments, future directions

Rapid advances in atomistic and phase-field modeling techniques as well as new experiments have led to major progress in solidification science during the first years of this century. Here, in this study, we review the most important findings in this technologically important area that impact our quantitative understanding of: (i) key anisotropic properties of the solid–liquid interface that govern solidification pattern evolution, including the solid–liquid interface free energy and the kinetic coefficient; (ii) dendritic solidification at small and large growth rates, with particular emphasis on orientation selection; (iii) regular and irregular eutectic and peritectic microstructures; (iv) effects of convection on microstructure formation; (v) solidification at a high volume fraction of solid and the related formation of pores and hot cracks; and (vi) solid-state transformations as far as they relate to solidification models and techniques. In light of this progress, critical issues that point to directions for future research in both solidification and solid-state transformations are identified.

Atomistic modeling↗

Hierarchical microstructures: a potential route to enhanced stability in structural materials for advanced nuclear reactors

The drive to increase efficiency in nuclear energy systems is leading to the need for materials that operate at higher temperatures and stress levels for extended periods, while maintaining stable microstructures to ensure their performance is not compromised. A novel route to producing materials that can perform well in such environments is the creation of hierarchical microstructures. A hierarchical microstructure is a microstructure in which features are present at multiple length scales simultaneously. In this work, a hierarchical microstructure is fabricated in a nickel-base superalloy, featuring nanometer-size gamma precipitates inside larger gamma-prime particles, which are in turn embedded in the gamma matrix phase. The hierarchical features of the microstructure lead to enhanced stability of the gamma-prime precipitates during annealing; the particle size does not follow the expected t^(1/3) growth law predicted by the classic LSW theory. Phase-field simulations are used to understand the unexpected stability of the gamma-prime precipitates.

36 - MATERIALS SCIENCE↗

Theoretical and computational comparison of models for dislocation dissociation and stacking fault/core formation in fcc crystals

In this study, the purpose of the current work is the theoretical and computational comparison of selected models for the energetics of dislocation dissociation resulting in stacking fault and partial dislocation (core) formation in fcc crystals as based on the (generalized) Peierls–Nabarro (GPN: e.g., Xiang et al., 2008, Shen et al., 2014), and phase-field (PF: e.g., Shen and Wang, 2004, Hunter et al., 2011, Hunter et al., 2013, Mianroodi and Svendsen, 2015), methodologies (e.g., Wang and Li, 2010).

36 MATERIALS SCIENCE↗

Two modes of grain boundary pinning by coherent precipitates

Here, we propose a two-mechanism theory to estimate the pinning effect of coherent precipitates on grain-boundary (GB) migration in grain growth, taking into account the important effect of elastic misfit strain at the coherent interface. Depending on the relative importance of the elastic and the GB contributions to the total free energy, Zener type stabilization or a novel elastic energy induced stabilization may occur. It is found that the pinning is most effective in the crossover region between these two mechanisms. Finally, a phase-field-crystal model is used to numerically validate the theory. Relevant experiments and potential impacts on alloy design are also discussed.

36 MATERIALS SCIENCE↗

Fully-coupled engineering and mesoscale simulations of thermal conductivity in UO2 fuel using an implicit multiscale approach

Reactor fuel performance is sensitive to microstructure changes during irradiation (such as fission gas and pore formation). This study proposes an approach to capture microstructural changes in the fuel by a two-way coupling of a mesoscale phase field irradiation model to an engineering scale, finite element calculation. This work solves the multiphysics equation system at the engineering-scale in a parallel, fully-coupled, fully-implicit manner using a preconditioned Jacobian-free Newton Krylov method (JFNK). A sampling of the temperature at the Gauss points of the coarse scale is passed to a parallel sequence of mesoscale calculations within the JFNK function evaluation phase of the calculation. The mesoscale thermal conductivity is calculated in parallel, and the result is passed back to the engineering-scale calculation. As this algorithm is fully contained within the JFNK function evaluation, the mesoscale calculation is nonlinearly consistent with the engineering-scale calculation. Further, the action of the Jacobian is also consistent, so the composite algorithm provides the strong nonlinear convergence properties of Newton's method. The coupled model using INL's \bison\ code demonstrates quadratic nonlinear convergence and good parallel scalability. Initial results predict the formation of large pores in the hotter center of the pellet, but few pores on the outer circumference. Thus, the thermal conductivity is is reduced in the center of the pellet, leading to a higher internal temperature than that in an unirradiated pellet.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Spin density wave and van Hove singularity in the kagome metal CeTi 3 Bi 4

Kagome metals with van Hove singularities near the Fermi level can host intriguing quantum phenomena such as chiral loop currents, electronic nematicity, and unconventional superconductivity. However, to our best knowledge, unconventional magnetic states driven by van Hove singularities–like spin-density waves–have not been observed experimentally in kagome metals. Here, we report the magnetic and electronic structure of the layered kagome metal CeTi 3 Bi 4 , where Ti kagome electronic structure interacts with a magnetic sublattice of Ce 3+ J eff = 1/2 moments. Neutron diffraction reveals an incommensurate spin-density wave ground state of the Ce 3+ moments, coexisting with commensurate antiferromagnetic order across most of the temperature-field phase diagram. The commensurate component is preferentially suppressed by thermal fluctuations and magnetic field, yielding a rich phase diagram involving an intermediate single-Q spin-density wave phase. First-principles calculations and angle-resolved photoemission spectroscopy identify van Hove singularities near the Fermi level, with the observed magnetic propagation vectors connecting their high density of states, strongly suggesting a van Hove singularity-assisted spin-density wave. These findings establish kagome metals LnTi 3 Bi 4 as a model platform where the characteristic electronic structure of the kagome lattice plays a pivotal role in magnetic order.

36 MATERIALS SCIENCE↗

Compositionally-Driven Formation Mechanism of Hierarchical Morphologies in Co-Deposited Immiscible Alloy Thin Films

Co-deposited, immiscible alloy systems form hierarchical microstructures under specific deposition conditions that accentuate the difference in constituent element mobility. The mechanism leading to the formation of these unique hierarchical morphologies during the deposition process is difficult to identify, since the characterization of these microstructures is typically carried out post-deposition. We employ phase-field modeling to study the evolution of microstructures during deposition combined with microscopy characterization of experimentally deposited thin films to reveal the origin of the formation mechanism of hierarchical morphologies in co-deposited, immiscible alloy thin films. Our results trace this back to the significant influence of a local compositional driving force that occurs near the surface of the growing thin film. We show that local variations in the concentration of the vapor phase near the surface, resulting in nuclei (i.e., a cluster of atoms) on the film’s surface with an inhomogeneous composition, can trigger the simultaneous evolution of multiple concentration modulations across multiple length scales, leading to hierarchical morphologies. We show that locally, the concentration must be above a certain threshold value in order to generate distinct hierarchical morphologies in a single domain.

36 MATERIALS SCIENCE↗

Modeling Sintering Processes of Nanoparticle Inks

The In-Pile Instrumentation program conducts research on advanced manufacturing of sensors for use within nuclear reactor experiments. The process for making these sensors involves the sintering of nanoparticles within solvent. The nanoparticles must be sintered in a way that minimizes pores and maximizes continuity. It has also been observed that the nanoparticle films may fall off the substrate, so maximizing adhesion is also important. To model the sintering process, the phase field method was employed for one and two nanoparticle - substrate systems and the contact angle was measured and compared to existing experimental and theoretical studies.

36 MATERIALS SCIENCE↗

Miscibility Gap Closure, Interface Morphology, and Phase Microstructure of 3D Li x FePO 4 Nanoparticles from Surface Wetting and Coherency Strain

We study the mesoscopic effects which suppress phase-segregation in Li x FePO 4 nanoparticles using a multiphysics phase-field model implement on a high performance cluster. We simulate 3D spherical particles of radii from 3nm to 40nm and examine the equilibrium microstructure and voltage profiles as a they depend on size and overall lithiation. The model includes anisotropic, concentration-dependent elastic moduli, misfit strain, and facet dependent surface wetting within a Cahn-Hilliard formulation. Here, we find that the miscibility gap vanishes for particles of radius ~ 5 nm, and the solubility limits change with overall particle lithiation. The corresponding voltage plateau, indicative of phase-segregation, changes in extent and also vanishes. Surface wetting is found to have a strong effect on stabilizing a variety of microstructures, exaggerating the shifting of solubility limits, and shortening the voltage plateau.

36 MATERIALS SCIENCE↗

Control of the interface between (He-3)-rich and (He-4)-rich phases using electric fields

A microgravity dilution refrigerator is considered, and it is shown that electric-field generated forces can be used to control the interface line between (He-3)-rich and (He-3)-poor phases. Fields as high as 13 MV/m are obtained in the present v-shaped geometry which correspond to positioning forces comparable to gravity. Good agreement is found between experimental results on the movements of the interface line and calculations obtained with a two-fluid model.

Israelsson, Ulf E.↗

Anisotropic Cahn-Hilliard free energy and interfacial energies for binary alloys with pairwise interactions

The original Cahn-Hilliard derivation of the contribution of compositional inhomogeneity to the free energy of a binary alloy with pairwise interactions is extended to include higher-order inhomogeneity terms. For alloys on a cubic lattice, the coefficient of the first inhomogeneity is a second-rank tensor and reduces to a scalar, but it is shown that the second order and the third order inhomogeneity terms are weighted by fourth-rank and sixth-rank tensors, thus resulting in anisotropic contributions. Furthermore, each interaction shell generates a unique set of inhomogeneity coefficients that is determined by the set of vectors connecting an atom to its neighbors on that shell. These coefficients are calculated for fcc and bcc alloys with interactions up fourth nearest neighbors. Phase field simulations based on these extended Cahn-Hilliard free energies are performed to measure interface free energies along specific crystallographic directions as a function of temperature, and to obtain the equilibrium shape of precipitates. Interface free energies, and the resulting anisotropies, are compared to those obtained by discrete models and Monte Carlo simulations.

36 MATERIALS SCIENCE↗

Multiscale Simulation of Thermo-mechanical Processes in Irradiated Fission-reactor Materials

This report contains a summary of progress made on the subtask area on phase field model development for microstructure evolution in irradiated materials, which was a part of the Computational Materials Science Network (CMSN) project entitled: Multiscale Simulation of Thermo-mechanical Processes in Irradiated Fission-reactor Materials. The model problem chosen has been that of void nucleation and growth under irradiation conditions in single component systems.

36 MATERIALS SCIENCE↗

In‐Operando Spatiotemporal Imaging of Coupled Film‐Substrate Elastodynamics During an Insulator‐to‐Metal Transition

Abstract The drive toward non‐von Neumann device architectures has led to an intense focus on insulator‐to‐metal (IMT) and the converse metal‐to‐insulator (MIT) transitions. Studies of electric field‐driven IMT in the prototypical VO 2 thin‐film channel devices are largely focused on the electrical and elastic responses of the films, but the response of the corresponding TiO 2 substrate is often overlooked, since it is nominally expected to be electrically passive and elastically rigid. Here, in‐operando spatiotemporal imaging of the coupled elastodynamics using X‐ray diffraction microscopy of a VO 2 film channel device on TiO 2 substrate reveals two new surprises. First, the film channel bulges during the IMT, the opposite of the expected shrinking in the film undergoing IMT. Second, a microns thick proximal layer in the substrate also coherently bulges accompanying the IMT in the film, which is completely unexpected. Phase‐field simulations of coupled IMT, oxygen vacancy electronic dynamics, and electronic carrier diffusion incorporating thermal and strain effects suggest that the observed elastodynamics can be explained by the known naturally occurring oxygen vacancies that rapidly ionize (and deionize) in concert with the IMT (MIT). Fast electrical‐triggering of the IMT via ionizing defects and an active “IMT‐like” substrate layer are critical aspects to consider in device applications.

36 MATERIALS SCIENCE↗