Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phase boundary”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Composition dependence of local piezoelectric nonlinearity in (0.3)Pb(Ni0.33Nb0.67)O-3-(0.7)Pb(ZrxTi1-x)O-3 films

The composition dependence of dielectric and piezoelectric nonlinearities were characterized in epitaxially grown (0.3)Pb(Ni0.33Nb0.67)O3-(0.7)Pb(ZrxTi1 x)O3 thin films deposited on SrTiO3. Tetragonal, morphotropic phase boundary (MPB) and rhombohedral films were prepared by changing the Zr/Ti ratio. The relative dielectric permittivity r and the converse piezoelectric coefficient d33,f were found to follow the Rayleigh law. The local piezoelectric nonlinearity map showed the formation of micron-sized clusters of higher nonlinear activity for the MPB and rhombohedral compositions. The ratios of the irreversible to the reversible Rayleigh constants / init and the spatially averaged d/d33,init ratio were larger for the rhombohedral and MPB compositions compared to the tetragonal composition. The larger dielectric and piezoelectric nonlinearities observed for the rhombohedral sample are interpreted in terms of a higher domain wall mobility due to a smaller ferroelectric distortion and superior crystal quality.

Griggio, Flavio↗

Reduction in anti-ferromagnetic interactions in ion-beam deposited Fe{sub 3}O{sub 4} thin films

Phase pure Fe{sub 3}O{sub 4} thin films of thickness {approx}42 nm have been prepared on the Si(100) substrate by reactive ion beam sputtering in the growth temperature range of 150-250 deg. C. A high degree of phase purity in the 175 deg. C sample has been confirmed by the XRD, Raman shift, and R-T measurements. The polycrystalline films show a sharp Verway transition as supported by temperature dependent resistivity, AC susceptibility, and coercivity behavior. The significant feature of these films is the early saturation of their room temperature magnetization at {approx}400 mT, indicating the presence of low anti-ferromagnetic competitions in sharp contrast to most of the previous reports. The noticeable reduction of anti-phase boundaries and its dependence on growth temperature has been correlated with the energetic ion-beam deposition process, and explained in terms of the of ionic vacancy migration approach of Eerenstein et al.[Phys. Rev. B 68, 014428 (2003)]. The electronic conduction of these films is governed by near-neighbor hopping above 240 K and Shklovskii-Efros variable range hopping below this transition temperature.

36 MATERIALS SCIENCE↗

Electromechanical strain in Bi(Zn{sub 1/2}Ti{sub 1/2})O{sub 3}-(Bi{sub 1/2}Na{sub 1/2})TiO{sub 3}-(Bi{sub 1/2}K{sub 1/2})TiO{sub 3} solid solutions

Solid solutions ceramics of the Bi(Zn{sub 0.5}Ti{sub 0.5})O{sub 3}-(Bi{sub 0.5}K{sub 0.5})TiO{sub 3}-(Bi{sub 0.5}Na{sub 0.5})TiO{sub 3} ternary system for <20 mol. % BZT were created and confirmed to be single phase using x-ray diffraction. The dielectric dispersion showed decreasing T{sub max} of the dielectric spectrum with a broadening of the transition with increasing BZT content. At 2.5BZT-40BKT-57.5BNT, a secondary transition commonly observed for morphotropic phase boundary (MPB) BNT-BKT was observed. The ferroelectric behavior of the system was characterized by a transition where the polarization hysteresis showed a severe pinching effect on remanent polarization (20.8 {mu}C/cm{sup 2} at 2.5% BZT) as BZT contents was increased (P{sub r}= 2.3 {mu}C/cm{sup 2} at 20% BZT). Similarly, as the temperature increased to 175 deg. C, the remanent polarization of the 2.5% BZT composition significantly reduced to 2.1 {mu}C/cm{sup 2}. The onset of this transition corresponds to the lower temperature frequency dispersion observed in the dielectric spectrum. The strain hysteresis experienced analogous transition to the polarization, with a change in shape from typical ferroelectric butterfly to a complete loss of negative strain as BZT concentration increased. Maximum strain values of 0.33% were observed at 5-40-55 accompanied by a large d{sub 33}{sup *}=547pm/V.

36 MATERIALS SCIENCE↗

A statistical model approximation for perovskite solid-solutions: a Raman study of lead-zirconate- titanate single crystal

Lead titanate (PbTiO3) is a classical example of a ferroelectric perovskite oxide illustrating a displacive phase transition accompanied by a softening of a symmetry-breaking mode. The underlying assumption justifying the soft-mode theory is that the crystal is macroscopically sufficiently uniform so that a meaningful free energy function can be formed. In contrast to PbTiO3, experimental studies show that the phase transition behaviour of lead-zirconate-titanate solid solution (PZT) is far more subtle. Most of the studies on the PZT system have been dedicated to ceramic or powder samples, in which case an unambiguous soft-mode study is not possible, as modes with different symmetries appear together. Our Raman scattering study on titanium-rich PZT single crystal shows that the phase transitions in PZT cannot be described by a simple soft-mode theory. In strong contrast to PbTiO3, splitting of transverse E-symmetry modes reveals that there are different locally-ordered regions. The role of crystal defects, random distribution of Ti and Zr at the B- cation site and Pb ions shifted away from their ideal positions, dictates the phase transition mechanism. A statistical model explaining the observed peak splitting and phase transformation to a complex state with spatially varying local order in the vicinity of the morphotropic phase boundary is given.

Frantti, Johannes↗

Enhanced piezoelectric performance of (0.98-x)Bi(Sc{sub 3/4}In{sub 1/4})O{sub 3}-xPbTiO{sub 3}-0.02Pb(Zn{sub 1/3}Nb{sub 2/3})O{sub 3} ternary high temperature piezoelectric ceramics

(0.98-x)Bi(Sc{sub 3/4}In{sub 1/4})O{sub 3}-xPbTiO{sub 3}-0.02Pb(Zn{sub 1/3}Nb{sub 2/3})O{sub 3} (BSI-PT-PZN) high temperature piezoelectric ceramics were prepared by traditional solid-state reaction method. Combining X-ray diffraction results with piezoelectric data, it was found that the morphotropic phase boundary (MPB) occurred at x = 0.575. The piezoelectric constant d{sub 33}, curie temperature T{sub c}, and electromechanical coupling factor k{sub p} of BIS-PT-PZN ceramics with MPB composition were 427 pC/N, 412 Degree-Sign C, and 0.51, respectively. Furthermore, the strain of BIS-PT-PZN ceramics reached up to 0.25% under the electric field of 40 kV/cm. Temperature-dependent electromechanical coupling coefficient for MPB composition was stable from room temperature up to 350 Degree-Sign C. The piezoelectric properties of BIS-PT-PZN ceramics were comparable to that of 0.36BiScO{sub 3}-0.64PbTiO{sub 3} (BS-PT) ceramics, and the piezoelectric constant d{sub 33} of BIS-PT-PZN ceramics was about twice that of our previous reported 0.4Bi(Sc{sub 3/4}In{sub 1/4})O{sub 3}-0.6PbTiO{sub 3} (BSI-PT) ceramics. The reduction in the expensive Sc{sub 2}O{sub 3} content and comparable piezoelectric properties with BS-PT ceramics indicated that BIS-PT-PZN ceramics were promising for commercial applications as high temperature actuators and sensors.

36 MATERIALS SCIENCE↗

An (ultra) high-vacuum compatible sputter source for oxide thin film growth

A miniaturised CF-38 mountable sputter source for oxide and metal thin film preparation with enhanced high-vacuum and ultra-high-vacuum compatibility is described. The all home-built sputtering deposition device allows a high flexibility also in oxidic sputter materials, suitable deposition rates for preparation of films in the nm- and the sub-monolayer regime and excellent reliability and enhanced cleanliness for usage in UHV chambers. For a number of technologically important – yet hardly volatile – materials, the described source represents a significant improvement over thermal deposition techniques like electron-beam- or thermal evaporation, as especially the latter are no adequate tool to prepare atomically clean layers of refractory oxide materials. Furthermore, it is superior to commercially available magnetron sputter devices, especially for applications, where highly reproducible sub-monolayer thin film preparation under very clean UHV conditions is required (e.g., for studying phase boundary effects in catalysis). The device in turn offers the usage of a wide selection of evaporation materials and special target preparation procedures also allow the usage of pressed oxide powder targets. To prove the performance of the sputter-source, test preparations with technologically relevant oxide components, comprising ZrO{sub 2} and yttrium-stabilized ZrO{sub 2}, have been carried out. A wide range of characterization methods (electron microscopy, X-ray photoelectron spectroscopy, low-energy ion scattering, atomic force microscopy, and catalytic testing) were applied to demonstrate the properties of the sputter-deposited thin film systems.

36 MATERIALS SCIENCE↗

Time-dependence of the alpha to epsilon phase transformation in iron

Here, iron was ramp-compressed over timescales of 3 ≤ t(ns) ≤ 300 to study the time-dependence of the α→ε (bcc→hcp) phase transformation. Onset stresses (σ α→ε ) for the transformation ~14.8-38.4 GPa were determined through laser and magnetic ramp-compression techniques where the transition strain-rate was varied between 10 6 ≤ $\dot{μ}$ α→ε (s ₋1 ) ≤ 5×10 8 . We find σ α→ε = 10.8 + 0.55 ln($\dot{μ}$ α→ε ) for $\dot{μ}$ α→ε < 10 6 /s and σ α→ε = 1.15($\dot{μ}$ α→ε ) 0.18 for $\dot{μ}$ α→ε > 10 6 /s. This $\dot{μ}$ response is quite similar to recent results on incipient plasticity in Fe suggesting that under high rate ramp compression the α→ε phase transition and plastic deformation occur through similar mechanisms, e.g., the rate limiting step for $\dot{μ}$ > 10 6 /s is due to phonon scattering from defects moving to relieve strain. We show that over-pressurization of equilibrium phase boundaries is a common feature exhibited under high strain-rate compression of many materials encompassing many orders of magnitude of strain-rate.

36 MATERIALS SCIENCE↗

Dependence of the mechanical behavior of alloys on their electron work function—An alternative parameter for materials design

In this article, we demonstrate that the electron work function (EWF) as an intrinsic parameter can provide information or clues in a simple or straightforward way for material design, modification, and development. A higher work function of a material represents a more stable electronic state, which consequently generates a higher resistance to any attempt of changing the electronic state and other corresponding states, e.g., changes in structure or microstructure caused by mechanical and electrochemical actions. Using Cu-Ni alloy as an example, we demonstrate the correlation between the EWF and Young's modulus of the material as well as its hardness. The properties of a material can be modified using elements with appropriate work functions. This is also applicable for tailoring inter-phase boundaries or interfaces.

36 MATERIALS SCIENCE↗

Low-temperature thermal conductivity of antiferromagnetic S = 1/2 chain material CuCl{sub 2}·2((CH{sub 3}){sub 2}SO)

We study the heat transport of S = 1/2 chain compound CuCl{sub 2}·2((CH{sub 3}){sub 2}SO) along the b axis (vertical to the chain direction) at very low temperatures. The zero-field thermal conductivity (κ) shows a distinct kink at about 0.9 K, which is related to the long-range antiferromagnetic (AF) transition. With applying magnetic field along the c axis, κ(H) curves also show distinct changes at the phase boundaries between the AF and the high-field disordered states. These results indicate a strong spin-phonon interaction and the magnetic excitations play a role in the b-axis heat transport as phonon scatterers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Polarization switching characteristics of 0.5BaTi{sub 0.8}Zr{sub 0.2}O{sub 3}-0.5Ba{sub 0.7}Ca{sub 0.3}TiO{sub 3} lead free ferroelectric thin films by pulsed laser deposition

We report on the ferroelectricity for morphotropic-phase-boundary lead (Pb) free 0.5BaTi{sub 0.8}Zr{sub 0.2}O{sub 3}-0.5Ba{sub 0.7}Ca{sub 0.3}TiO{sub 3} (0.5BZT-0.5BCT) thin films. Thin films were grown on Pt/Ti/SiO{sub 2}/Si substrate using pulsed laser deposition. Raman spectroscopic data combined with the X-ray diffraction analyses confirm body centered tetragonal crystallographic structure 0.5BZT-0.5 BCT thin films on Pt/Ti/SiO{sub 2}/Si. Polarization studies demonstrate that these 0.5BZT-0.5BCT films exhibit a large remnant and saturation polarization of 37 μC/cm{sup 2} and 40 μC/cm{sup 2}, respectively, with a coercive field of 140 kV/cm. A correlation between polarization dynamics, structural distortion, and phonon vibration is established. The splitting of X-ray diffraction peak of the thin film in the 2θ range of 44.5° to 46.5° represents high degree of tetragonality. The tetragonality factor calculated by Rietveld analysis was found to be 0.006 and can be a major cause for the increased remnant polarization value. It is established from Raman spectra that the non-centrosymmetricity due to the displacement of Ti/Zr ions from its octahedral position is related to the peak position as well as the broadening of the A{sub 1} (LO) optical phonon mode. This increase of broadness in the thin film causes an increase in the dipole moment of the unit cell and, hence, the net increase in polarization values.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Photoluminescence in Pb{sub 0.95}Sr{sub 0.05}(Zr{sub 1−x}Ti{sub x}){sub 1−y}Cr{sub y}O{sub 3} ferroelectric ceramic system

Over the past several years, there has been a remarkable growth and development in new ceramic and/or composite materials to be used in the electro-electronic industry. Ferroelectric materials have been recognized for their multifunctional physical properties; also, their optical properties are a subject of intense research effort due to their possible electro-optic applications. In this work, the visible photoluminescence effect is analyzed at room temperature in a sintered Pb{sub 0.95}Sr{sub 0.05}(Zr{sub 1−x}Ti{sub x}){sub 1−y}Cr{sub y}O{sub 3} perovskite-type structure system, doped with Sr and Cr. The excitation bands used were 267, 325, 373, 457, 635, and 680 nm, but the best result was obtained at 373 nm. The intensity and energy of such emission in this system have been studied by changing the molar Cr concentration (0 < y < 0.005) and the Ti content (x), with x = 0.20, 0.40, 0.53, 0.60, and 0.80, on both sides of the morphotropic phase boundary (MPB) zone. The principal emission bands are at the energies 1.73, 1.87, and 3.03 eV. The changes that were caused by Zr or Ti ions in the symmetry presented in the rhombohedral or tetragonal side of the MPB are more important. Additionally, structural and micro-structural measurements were performed by the x-ray diffraction and scanning electron microscopy techniques, respectively. The micro-Raman technique is also used in the study of this set of samples, which allows finding the Raman shift modes and the influence on the structural changes of the dopants.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Low defect InGaAs quantum well selectively grown by metal organic chemical vapor deposition on Si(100) 300 mm wafers for next generation non planar devices

Metal organic chemical vapor deposition of GaAs, InGaAs, and AlGaAs on nominal 300 mm Si(100) at temperatures below 550 °C was studied using the selective aspect ratio trapping method. We clearly show that growing directly GaAs on a flat Si surface in a SiO{sub 2} cavity with an aspect ratio as low as 1.3 is efficient to completely annihilate the anti-phase boundary domains. InGaAs quantum wells were grown on a GaAs buffer and exhibit room temperature micro-photoluminescence. Cathodoluminescence reveals the presence of dark spots which could be associated with the presence of emerging dislocation in a direction parallel to the cavity. The InGaAs layers obtained with no antiphase boundaries are perfect candidates for being integrated as channels in n-type metal oxide semiconductor field effect transistor (MOSFET), while the low temperatures used allow the co-integration of p-type MOSFET.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Diffusive and quantum effects of water properties in different states of matter

The enthalpy, entropy, and free energy of water are important physical quantities for understanding many interesting phenomena in biological systems. However, conventional approaches require different treatments to incorporate quantum and diffusive effects of water in different states of matter. In this work, we demonstrate the use of the two-phase thermodynamic (2PT) model as a unified approach to obtain the properties of water over the whole phase region of water from short (∼20 ps) classical molecular dynamics trajectories. The 2PT model provides an effective way to separate the diffusive modes (gas-like component) from the harmonic vibrational modes (solid-like component) in the vibrational density of states (DoS). Therefore, both diffusive and quantum effect can be properly accounted for water by applying suitable statistical mechanical weighting functions to the DoS components. We applied the 2PT model to systematically examine the enthalpy, entropy, and their temperature dependence of five commonly used rigid water models. The 2PT results are found to be consistent with those obtained from more sophisticated calculations. While the thermodynamic properties determined from different water models are largely similar, the phase boundary determined from the equality of free energy is very sensitive to the small inaccuracy in the values of enthalpy and absolute entropy. The enthalpy, entropy, and diffusivity of water are strongly interrelated, which challenge further improvement of rigid water model via parameter fitting. Our results show that the 2PT is an efficient method for studying the properties of water under various chemical and biological environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hot-stage transmission electron microscopy study of (Na, K)NbO{sub 3} based lead-free piezoceramics

Hierarchical nanodomains assembled into micron-sized stripe domains, which is believed to be associated with outstanding piezoelectric properties, were observed at room temperature in a typical lead free piezoceramics, (Na{sub 0.52}K{sub 0.48−x})(Nb{sub 0.95−x}Ta{sub 0.05})-xLiSbO{sub 3}, with finely tuned polymorphic phase boundaries (x = 0.0465) by transmission electron microscopy. The evolution of domain morphology and crystal structure under heating and cooling cycles in the ceramic was investigated by in-situ hot stage study. It is found that the nanodomains are irreversibly transformed into micron-sized rectangular domains during heating and cooling cycles, which lead to the thermal instability of piezoelectric properties of the materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of composition and temperature on the large field behavior of [011]{sub C} relaxor ferroelectric single crystals

The large field behavior of [011]{sub C} cut relaxor ferroelectric lead indium niobate–lead magnesium niobate–lead titanate, xPb(In{sub 1/2}Nb{sub 1/2})O{sub 3}-(1-x-y)Pb(Mg{sub 1/3}Nb{sub 2/3})O{sub 3}-yPbTiO{sub 3}, single crystals was experimentally characterized in the piezoelectric d{sub 322}-mode configuration under combined mechanical, electrical, and thermal loading. Increasing the concentration of lead indium niobate and decreasing the concentration of lead titanate in compositions near the morphotropic phase boundary resulted in a decrease of mechanical compliance, dielectric permittivity, and piezoelectric coefficients as well as a shift from a continuous to a discontinuous transformation.

36 MATERIALS SCIENCE↗

Interfacial structure in epitaxial perovskite oxides on (001) Ge crystal

We investigated the interfacial structure of hetero-epitaxial SrZr{sub 0.68}Ti{sub 0.32}O{sub 3} thin film deposited on (001) Ge single crystal via transmission electron microscopy (TEM). The results from high-resolution scanning TEM and electron energy-loss spectroscopy show an atomically abrupt interface without secondary phase. We found misfit dislocations with Burgers vector of 1/2a 〈111〉 and threading dislocations with Burgers vector of a 〈100〉. Furthermore, we observed the coupling between dislocation half-loop and anti-phase boundary induced by the lattice terrace of Ge along 〈100〉 direction and their decoupling after annealing. We proposed models based on half-loop theory to interpret the coupling and the dislocation reactions.

36 MATERIALS SCIENCE↗

Large piezoelectricity in Pb-free 0.96(K{sub 0.5}Na{sub 0.5}){sub 0.95}Li{sub 0.05}Nb{sub 0.93}Sb{sub 0.07}O{sub 3}−0.04BaZrO{sub 3} ceramic: A perspective from microstructure

We employ transmission electron microscopy to explore the reason for large piezoelectricity (d{sub 33}≈400pC/N) in a Pb-free 0.96(K{sub 0.5}Na{sub 0.5}){sub 0.95}Li{sub 0.05}Nb{sub 0.93}Sb{sub 0.07}O{sub 3} −0.04BaZrO{sub 3} ceramic from microstructure. The result shows that the high piezoelectricity corresponds to a miniaturized nanodomain configuration in a domain hierarchy. The nanodomains disappear on heating accompanied by a reduction in d{sub 33} value. Further convergent beam electron diffraction study reveals a coexistence of tetragonal and orthorhombic phase, which indicates that large piezoelectricity of KNLNS{sub 0.07}-BZ may stem from easy polarization rotation due to low polarization anisotropy on the tetragonal-orthorhombic phase boundary.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Non-intrusive, high-resolution, real-time, two-dimensional imaging of multiphase materials using acoustic array sensors

Two parallel multi-element ultrasonic acoustic arrays combined with sets of focal laws for acoustic signal generation and a classical tomographic inversion algorithm are used to generate real-time two-dimensional micro seismic acoustic images of multiphase materials. Proof of concept and calibration measurements were performed for single phase and two phase liquids, uniform polyvinyl chloride (PVC) plates, and aluminum cylinders imbedded in PVC plates. Measurement artefacts, arising from the limited range of viewing angles, and the compromise between data acquisition rate and image quality are discussed. The angle range of scanning and the image resolution were varied, and the effects on the quality of the reproduction of the speed of sound profiles of model solids and liquids with known geometries and compositions were analysed in detail. The best image quality results were obtained for a scanning angle range of [−35°, 35°] at a step size of 2.5° post processed to generate images on a 40 μm square grid. The data acquisition time for high quality images with a 30 mm × 40 mm view field is 10 min. Representation of two-phase solids with large differences in speed of sound between phases and where one phase is dispersed in the form of macroscopic objects (greater than 1 mm in diameter) proved to be the most difficult to image accurately. Liquid-liquid and liquid-vapor phase boundaries, in micro porous solids by contrast, were more readily defined. Displacement of air by water and water by heptane in natural porous limestone provides illustrative kinetic examples. Measurement results with these realistic cases demonstrate the feasibility of the technique to monitor in real time and on the micrometer length scale local composition and flow of organic liquids in inorganic porous media, one of many envisioned engineering applications. Improvement of data acquisition rate is an area for future collaborative study.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗