Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “optical materials and structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Intersubband transitions in nonpolar and semipolar III-nitrides: Materials, devices, and applications

In the last two decades, the third-generation wide bandgap semiconductor III-nitrides have revolutionized a myriad of electronic and photonic devices and applications, including power electronics, extreme-environment electronics, RF amplifiers, and optoelectronics such as light-emitting diodes and laser diodes. Recently, III-nitride heterostructures (e.g., AlGaN/GaN) based intersubband transition (ISBT) has garnered considerable research interest for infrared (IR), terahertz (THz), and ultrafast optoelectronics (e.g., photodetectors and quantum cascade lasers) due to its large conduction band offset, large optical phonon energy, and promising room-temperature operation. This paper presents a comprehensive review on the recent progress and challenges of III-nitrides based ISBT from the perspectives of materials, structures, devices, and applications, with a focus on nonpolar and semipolar III-nitrides. Various device structures have been demonstrated for III-nitrides based ISBT, including quantum wells, dots, and wires, among which AlGaN/GaN quantum wells are the most widely used. The effects of device parameters, crystal orientations, and doping on the ISBT properties of AlGaN/GaN quantum wells are discussed. Although the room-temperature operation is still elusive, theoretical and experimental studies show that nonpolar and semipolar III-nitrides based ISBT exhibits tunable ISBT wavelength from far-IR to THz spectral range with higher efficiency compared with polar c-plane ISBT. This review can serve as a gateway to and an important reference for the recent progress and challenges of III-nitrides based ISBT and its potential applications in sensing, communication, ultrafast optoelectronics, and integrated photonics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Singly occupied 4⁢𝑓 antiferromagnetic insulators: CePO 4 and CeVO 4

Rare-earth containing wide band gap oxides, which provide spin-photon interface and narrow linewidth optical emission, are getting significant attention as the most promising candidate materials in advancing quantum transduction and memories. Here, in this work, from ab initio calculations, we identify antiferromagnetic ground states in structurally preferred monoclinic CePO 4 and tetragonal CeVO 4 exhibiting localized occupied and unoccupied Ce 4⁢𝑓 states with 4⁢𝑓−4⁢𝑓 transition characteristics. Interestingly, in CePO 4 , O 2⁢𝑝 and P 3⁢𝑝 states hybridize negligibly with Ce 4⁢𝑓 states, while in CeVO 4 , V 3⁢𝑑 and O 2⁢𝑝 states hybridize and appear as extended states in between the occupied and unoccupied Ce 4⁢𝑓 states. Here, phonon calculations and analysis identify and differentiate Raman active phonon modes along with the spin phonon coupling of Ce in both CePO 4 and CeVO 4 that ultimately lead to different 4⁢𝑓 ground-state crystal-field multiplets, which are critical to accurately describe electronic transitions for foundational quantum transduction and memories. Further, the identified 𝐶 1 site symmetry of Ce, lacking inversion symmetry in CePO 4 , is relevant for quantum memories and 𝐷 2⁢𝑑 site symmetry of Ce exhibiting inversion symmetry in CeVO 4 is relevant for quantum transduction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Physics Goals of DWA Experiments at FACET-II

The dielectric wakefield acceleration (DWA) program at FACET produced a multitude of new physics results that range from GeV/m acceleration to the discovery of high field-induced conductivity in THz waves, and beyond, to a demonstration of positron-driven wakes. Here we review the rich program now developing in the DWA experiments at FACET-II. With increases in beam quality, a key feature of this program is extended interaction lengths, near 0.5 m, permitting GeV-class acceleration. Detailed physics studies in this context include beam breakup and its control through the exploitation of DWA structure symmetry. The next step in understanding DWA limits requires the exploration of new materials with low loss tangent, large bandgap, and improved thermal characteristics. Advanced structures with photonic features for mode confinement and exclusion of the field from the dielectric, as well as quasi-optical handling of coherent Cerenkov signals is discussed. Use of DWA for laser-based injection and advanced temporal diagnostics is examined.

43 PARTICLE ACCELERATORS↗
NASA NTRS1977

The application of thermally stable graphite composites to a space telescope structure

An optical bench and associated mirror support structural components were designed and fabricated for the HEAO-B satellite. Stringent dimensional stability criteria dictated the use of a graphite/epoxy composite as the basic structural material. Design, analysis, and fabrication aspects are discussed for the resulting structures, which pioneer the use of advanced composite materials for significant applications to orbital flight hardware.

Prunty, J.↗
NASA NTRS1991

System dynamic simulation of precision segmented reflector

A joint effort was undertaken on a Precision Segmented Reflector (PSR) Project. The missions in which the PSR is to be used will use large (up to 20 m in diameter) telescopes. The essential requirement for the telescopes is that the reflector surface of the primary mirror must be made extremely precise to allow no more than a few microns of errors and, additionally, this high surface precision must be maintained when the telescope is subjected to on-orbital mechanical and thermal disturbances. Based on the mass, size, and stability considerations, reflector surface formed by segmented, probably actively or passively controlled, composite panels are regarded as most suitable for future space based astronomical telescope applications. In addition to the design and fabrication of composite panels with a surface error of less than 3 microns RMS, PSR also develops related reflector structures, materials, control, and sensing technologies. As part of the planning effort for PSR Technology Demonstration, a system model which couples the reflector, consisting of panels, support truss and actuators, and the optical bench was assembled for dynamic simulations. Random vibration analyses using seismic data obtained from actual measurements at the test site designated for PSR Technology Demonstration are described.

Shih, Choon-Foo↗
NASA NTRS1992

Hubble Space Telescope imaging of distant galaxies - 4C 41.17 at z = 3.8

The Hubble Space Telescope has been used to image the continuum emission from 4C 41.17 at z = 3.8, the most distant galaxy known. The galaxy was detected with good signal-to-noise ratio and was spatially resolved at the 0.1 arcsec (440 pc) HST resolution. About 35 percent of this emission is in the form of a high brightness clumpy region extending by about 0.5 arcsec (1.7 kpc), whose morphology is remarkably similar to that of the radio components. A fainter more diffuse region of optical emission extends westward from the center of the nuclear complex for about 1.2 arcsec (5.3 kpc) out along the radio axis. The clumpiness of the optical emission and its close correspondence with the radio structure on the subkiloparsec scale is discussed in the light of current models for high-redshift galaxies. Our observations imply that the material in the center of this galaxy is clumpy on the subkiloparsec scale.

Miley, G. K.↗
NASA NTRS1993

Nonlinear optical thin films

A focused approach to development and evaluation of organic polymer films for use in optoelectronics is presented. The issues and challenges that are addressed include: (1) material synthesis, purification, and the tailoring of the material properties; (2) deposition of uniform thin films by a variety of methods; (3) characterization of material physical properties (thermal, electrical, optical, and electro-optical); and (4) device fabrication and testing. Photonic materials, devices, and systems were identified as critical technology areas by the Department of Commerce and the Department of Defense. This approach offers strong integration of basic material issues through engineering applications by the development of materials that can be exploited as the active unit in a variety of polymeric thin film devices. Improved materials were developed with unprecedented purity and stability. The absorptive properties can be tailored and controlled to provide significant improvement in propagation losses and nonlinear performance. Furthermore, the materials were incorporated into polymers that are highly compatible with fabrication and patterning processes for integrated optical devices and circuits. By simultaneously addressing the issues of materials development and characterization, keeping device design and fabrication in mind, many obstacles were overcome for implementation of these polymeric materials and devices into systems. We intend to considerably improve the upper use temperature, poling stability, and compatibility with silicon based devices. The principal device application that was targeted is a linear electro-optic modulation etalon. Organic polymers need to be properly designed and coupled with existing integrated circuit technology to create new photonic devices for optical communication, image processing, other laser applications such as harmonic generation, and eventually optical computing. The progression from microscopic sample to a suitable film-forming material in a working device is a complex, multifaceted endeavor. It requires close attention to maintaining the optical properties of the electro-optic active portion of the polymer while manipulating the polymer structure to obtain the desired secondary polymer properties.

Leslie, Thomas M.↗
NASA NTRS1999

Synthesis of Fullerenes in Low Pressure Benzene/Oxygen Diffusion Flames

The interest in fullerenes is strongly increasing since their discovery by Kroto et al. in 1985 as products of the evaporation of carbon into inert gas at low pressure. Due to their all carbon closed-shell structure, fullerenes have many exceptional physical and chemical properties and a large potential for applications such as superconductors, sensors, catalysts, optical and electronic devices, polymers, high energy fuels, and biological and medical materials. This list is still growing, because the research on fullerenes is still at an early stage. Fullerenes can be formed not only in a system containing only carbon and an inert gas, but also in premixed hydrocarbon flames under reduced pressure and fuel rich conditions. The highest yields of fullerenes in flames are obtained under conditions of substantial soot formation. There is a need for more information on the yields of fullerenes under different conditions in order to understand the mechanisms of their formation and to enable the design of practical combustion systems for large-scale fullerene production. Little work has been reported on the formation of fullerenes in diffusion flames. In order to explore the yields of fullerenes and the effect of low pressure in diffusion flames, therefore we constructed and used a low pressure diffusion flame burner in this study.

Hebgen, Peter↗
NASA NTRS2007

Carbon Nanotubes for Space Photovoltaic Applications

Carbon nanotubes (CNTs) can be envisioned as an individual graphene sheet rolled into a seamless cylinder (single-walled, SWNT), or concentric sheets as in the case of a multi-walled carbon nanotube (MWNT) (1). The role-up vector will determine the hexagonal arrangement and "chirality" of the graphene sheet, which will establish the nanotube to be metallic or semiconducting. The optoelectronic properties will depend directly on this chiral angle and the diameter of the SWNT, with semiconductor types exhibiting a band gap energy (2). Characteristic of MWNTs are the concentric graphene layers spaced 0.34 nm apart, with diameters from 10-200 nm and lengths up to hundreds of microns (2). In the case of SWNTs, the diameters range from 0.4 - 2 nm and lengths have been reported up to 1.5 cm (3). SWNTs have the distinguishable property of "bundling" together due to van der Waal's attractions to form "ropes." A comparison of these different structural types is shown in Figure 1. The use of SWNTS in space photovoltaic (PV) applications is attractive for a variety of reasons. Carbon nanotubes as a class of materials exhibit unprecedented optical, electrical, mechanical properties, with the added benefit of being nanoscale in size which fosters ideal interaction in nanomaterial-based devices like polymeric solar cells. The optical bandgap of semiconducting SWNTs can be varied from approx. 0.4 - 1.5 eV, with this property being inversely proportional to the nanotube diameter. Recent work at GE Global Research has shown where a single nanotube device can behave as an "ideal" pn diode (5). The SWNT was bridged over a SiO2 channel between Mo contacts and exhibited an ideality factor of 1, based on a fit of the current-voltage data using the diode equation. The measured PV efficiency under a 0.8 eV monochromatic illumination showed a power conversion efficiency of 0.2 %. However, the projected efficiency of these junctions is estimated to be > 5 %, especially when one considers the enhanced absorption (from nanotubes whose bandgap is tailored to illumination) and electromagnetic coupling in a network of nanotubes.

Efstathiadis, Harry↗
NASA NTRS2023

Space Weathering of Genesis Mission Solar-wind Collectors with Inferences for Weathering on Airless Bodies

Samples from the Genesis Solar Wind Sample Return (NASA Discovery 5) are a unique opportunity to study the initial stages of space weathering, i.e., the physical and chemical effects of solar-wind irradiation. Arrays of collectors containing multiple materials were each exposed to a different solar-wind regime (fast, slow, bulk, or coronal mass ejection) at the L1 point for long durations (years). Materials exposed to the solar wind included metals, semiconductors, and insulators. Although the time of exposure was obviously short relative to samples having extraterrestrial origins, optical properties, surface chemical properties, and matrix structure have changed in many collectors due to exposure to solar wind. The thickness of amorphous zones, where present, appears to correspond with the depth of the peak of the solar-wind H distribution in each regime. Damage from high-energy particles was negligible because the collectors were 700 μm or less in thickness and shielded from the back by the spacecraft. Micrometeorite impacts and sputtering were also negligible because of the short exposure times. Our current results are preliminary: We hope future workers will extend this study both to support Genesis characterization efforts and to further understand space-weathering processes on a geologic timescale.

space weathering↗
DOE OSTI2025

Full Device Evaluation of Metal Halide Perovskite Solar Cells in Low Earth Orbit Aboard the International Space Station

This study investigates how sustained low Earth orbit (LEO) exposure affects metal halide perovskite (MHP) thin films and perovskite solar cells (PSCs). It examines samples deployed on the Materials International Space Station Experiment (MISSE) 15 and 16 missions. Five methylammonium lead iodide (MAPI) thin films are deployed on MISSE-16, each with distinct UV filters to selectively attenuate AM0 spectral bands. While post-flight optical analysis reveals that the least UV-exposed film exhibits the highest emission and lowest non-radiative recombination rate, no clear correlation is observed among the rest, and all MAPI films maintained excellent integrity throughout the mission. MISSE-15 deployed eight PSCs with diverse structures, MHP compositions, and contact materials. Post-flight analysis reveals stable, highly emissive MHPs, but damaged contacts due to ion migration, which caused loss of electrical response. The MISSE missions demonstrate MHPs' suitability for space applications, while highlighting the need for improved interfacial layers and contact materials to enhance charge carrier mobility, prevent ion migration, and improve charge carrier extraction efficiency.

14 SOLAR ENERGY↗
DOE OSTI2022

X-ray diffraction measurements and pressure determination in nanosecond compression of solids up to 600 GPa

X-ray diffraction measurements under laser-driven dynamic compression now allow us to investigate the atomic structure of matter at TPa pressures and thousands of degree temperatures with broad implications for condensed matter physics, planetary science and astronomy. Furthermore, pressure determination in these experiments often relies on velocimetry measurements coupled with modeling that requires accurate knowledge of the optical and thermo-mechanical properties of a window material, resulting in significant systematic uncertainty. Here we demonstrate different approach applicable to X-ray diffraction experiments under quasi-isentropic ramp-compression based on the use of in-situ pressure calibrants, similar to the methods often adopted in static-compression experiments with diamond anvil cells. Focusing on experiments using a diamond window, we discuss challenges and mitigation strategies for the novel approach. Our study, in addition to providing new structural information of 5 metals up to hundreds of GPa, provides validation to the currently used methods based on time-resolved measurement of the diamond free-surface velocity, and reveals that the use of in-situ calibrants enables a factor of four reduction in the pressure uncertainty in these experiments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1990

Optical constants of solid methane

Methane is the most abundant simple organic molecule in the outer solar system bodies. In addition to being a gaseous constituent of the atmospheres of the Jovian planets and Titan, it is present in the solid form as a constituent of icy surfaces such as those of Triton and Pluto, and as cloud condensate in the atmospheres of Titan, Uranus, and Neptune. It is expected in the liquid form as a constituent of the ocean of Titan. Cometary ices also contain solid methane. The optical constants for both solid and liquid phases of CH4 for a wide temperature range are needed for radiative transfer calculations, for studies of reflection from surfaces, and for modeling of emission in the far infrared and microwave regions. The astronomically important visual to near infrared measurements of solid methane optical constants are conspicuously absent from the literature. Preliminary results are presented on the optical constants of solid methane for the 0.4 to 2.6 micrometer region. Deposition onto a substrate at 10 K produces glassy (semi-amorphous) material. Annealing this material at approximately 33 K for approximately 1 hour results in a crystalline material as seen by sharper, more structured bands and negligible background extinction due to scattering. The constant k is reported for both the amorphous and the crystalline (annealed) states. Typical values (at absorption maxima) are in the .001 to .0001 range. Below lambda = 1.1 micrometers the bands are too weak to be detected by transmission through the films less than or equal to 215 micrometers in thickness, employed in the studies to date. Using previously measured values of the real part of the refractive index, n, of liquid methane at 110 K, n is computed for solid methane using the Lorentz-Lorenz relationship. Work is in progress to extend the measurements of optical constants n and k for liquid and solid to both shorter and longer wavelengths, eventually providing a complete optical constants database for condensed CH4.

Khare, Bishun N.↗
DOE OSTI2022

Direct Characterization of Type-I Band Alignment in 2D Ruddlesden–Popper Perovskites

2D Ruddlesden–Popper halide perovskites have attracted considerable attention due to their desirable optoelectronic properties, high chemical and structural tunability, and improved environmental stability. However, the understanding of their structure–properties relationships is still limited. In particular, the energy level positions and band alignments at interfaces involving these materials, which are important features to control in the context of any applications, are still under debate. Here, the electronic structure of high-purity films of BA 2 MA n-1 Pb n I 3n+1 for n = 1–5 (where BA stands for butylammonium and MA for methylammonium) is investigated, using optical absorption, ultraviolet, and inverse photoemission spectroscopies, and density functional theory calculations. Further, this study determines the ionization energy and electron affinity of each compound and demonstrates a type-I band alignment for the BA 2 MA n-1 Pb n I 3n+1 series. This study further describes the evolution of the exciton binding energy as a function of the thickness of the inorganic layers.

2D Ruddlesden–Popper perovskites↗
NASA NTRS2017

Tutorial on Atomic Oxygen Effects and Contamination

Atomic oxygen is the most predominant specie in low Earth orbit (LEO) and is contained in the upper atmosphere of many other planetary bodies. Formed by photo-dissociation of molecular oxygen, it is highly reactive and energetic enough to break chemical bonds on the surface of many materials and react with them to form either stable or volatile oxides. The extent of the damage for spacecraft depends a lot on how much atomic oxygen arrives at the surface, the energy of the atoms, and the reactivity of the material that is exposed to it. Oxide formation can result in shrinkage, cracking, or erosion which can also result in changes in optical, thermal, or mechanical properties of the materials exposed. The extent of the reaction can be affected by mechanical loading, temperature, and other environmental components such as ultraviolet radiation or charged particles. Atomic oxygen generally causes a surface reaction, but it can scatter under coatings and into crevices causing oxidation much farther into a spacecraft surface or structure than would be expected. Contamination can also affect system performance. Contamination is generally caused by arrival of volatile species that condense on spacecraft surfaces. The volatiles are typically a result of outgassing of materials that are on the spacecraft. Once the volatiles are condensed on a surface, they can then be fixed on the surface by ultraviolet radiation andor atomic oxygen reaction to form stable surface contaminants that can change optical and thermal properties of materials in power systems, thermal systems, and sensors. This tutorial discusses atomic oxygen erosion and contaminate formation, and the effect they have on typical spacecraft materials. Scattering of atomic oxygen, some effects of combined environments and examples of effects of atomic oxygen and contamination on spacecraft systems and components will also be presented.

Earth orbital environments↗
DOE OSTI2021

In Situ Wood Delignification toward Sustainable Applications

As one of the most abundant and versatile natural materials on Earth, recently wood has attracted tremendous attention from scientists and engineers due to its outstanding advantages, including hierarchically porous microstructure, high mechanical strength, environmental friendliness, renewability, and biodegradability. Wood’s hierarchically porous structure and chemical components (e.g., cellulose, hemicelluloses, and lignin) enable its mechanical, ionic, optical, and thermal properties to be tuned via physical, chemical, and/or thermal modifications. Among these various approaches, the chemical delignification of bulk wood is the most fascinating, in which the majority of lignin and hemicelluloses is removed while leaving the cellulose intact, maintaining wood’s physical integrity and hierarchical structure. This delignified structure is unique, composed of hollow, aligned channels made up of cellulose microfibrils, and particularly attractive given its origin from a sustainable and renewable resource. As a result, delignified wood has attracted increasing attention for applications that go far beyond traditional wood utilization, such as lightweight yet strong structural materials, energy storage and conversion, environmental remediation, flexible electronics, and bioengineering. Here, we review recent developments in bulk wood delignification strategies toward the achievement of such advanced wood technologies for sustainable applications, with a focus on the research in our group. Similar to chemical pulping and bleaching, wood delignification involves a series of nucleophilic reactions based on alkaline Na 2 SO 3 or Na 2 S systems (i.e., chemical pulping) or electrophilic, radical, and oxidation reactions based on H 2 O 2 , ClO 2 , or NaClO systems (i.e., chemical bleaching) to deconstruct, fragment, and promote the hydrophilicity of lignin macromolecules, which finally make lignin easier to be removed. We discuss the structure and properties of partially and near-completely delignified wood, with a focus on process-structure–property relationships. The resulting delignified wood materials, with tunable structure and properties, demonstrate various advanced functions, in a wide range of advanced applications, such as building and construction, green energy, and electronics. Finally, the potential challenges and appealing perspectives of in situ wood delignification are discussed. In situ wood delignification, as a powerful modification strategy, has speeded up the development of advanced wood technologies and wood-based functional materials and products.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Unconventional Spintronics from Chiral Perovskites

Spintronic devices typically employ heterostructures with ferromagnets which break time-reversal symmetry and have non-vanishing magnetization. With the growing class of materials that support spin-polarized carriers, current, and excitations, it is possible to envision emerging spintronic applications that are not limited to magnetoresistance. Here, chiral perovskites with no net magnetization are considered, where the space-inversion and mirror symmetries are broken to induce chiral structure. The known importance of these perovskites is further expanded by the demonstration of the chiral-induced spin selectivity (CISS). However, the generation of the spin-polarized carriers across the interface with these chiral perovskites remains to be fully understood. These first-principles studies for 2D PbBr4-based chiral perovskites provide their electronic structure and an orbital-based symmetry analysis, which allows to establish an effective Hamiltonian to elucidate the underlying origin of their chirality. The same analysis is used for the Edelstein effect, responsible for electrical generation of the nonequilibrium spin polarization in many materials, which in chiral perovskites can be a mechanism contributing to CISS. Furthermore, by examining optical properties of chiral perovskites and the opportunity to use them to realize tunable altermagnets, another class of zero-magnetization spintronic materials, a versatile materials platform is put forth for unconventional spintronics.

14 SOLAR ENERGY↗
DOE OSTI2021

Electro-Optic Modulation Using Metal-Free Perovskites

Electro-optic (EO) modulation is of interest to impart information onto an optical carrier. Inorganic crystals—most notably LiNbO 3 and BaTiO 3 —exhibit EO modulation and good stability, but are difficult to integrate with silicon photonic technology. Solution-processed organic EO materials are readily integrated but suffer from thermal degradation at the temperatures required in operating conditions for accelerated reliability studies. Hybrid organic–inorganic metal halide perovskites have the potential to overcome these limitations; however, these have so far relied on heavy metals such as lead and cadmium. Here, we report linear EO modulation using metal-free perovskites, which maintain the crystalline features of the inorganic EO materials and incorporate the flexible functionality of organic EO chromophores. We find that, by introducing a deficiency of cations, we reduce the symmetry in the perovskite crystal and produce thereby an increased EO response. The best-engineered perovskites reported herein showcase an EO coefficient of 14 pm V –1 at a modulation frequency of 80 kHz, an order of magnitude higher than in the nondefective materials. Furthermore, we observe split peaks in the X-ray diffraction and neutron diffraction patterns of the defective sample, indicating that the crystalline structure has been distorted and the symmetry reduced. Density functional theory (DFT) studies link this decreased symmetry to NH 4 + deficiencies. This demonstration of EO from metal-free perovskites highlights their potential in next-generation optical information transmission.

36 MATERIALS SCIENCE↗