SEARCH · Engineering Papers
Results for “operational assessment”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Liquefaction and Storage of In-Situ Oxygen on the Surface of Mars
The In-Situ production of propellants for Martian and Lunar missions has been heavily discussed since the mid 1990's. One portion of the production of the propellants is the liquefaction, storage, and delivery of the propellants to the stage tanks. Two key technology development efforts are required: large refrigeration systems (cryocoolers) to perform the liquefaction and high performance insulation within a soft vacuum environment. Several different concepts of operation may be employed to liquefy the propellants based on how and where these two technologies are implemented. The concepts that were investigated include: using an accumulator tank to store the propellant until it is needed, liquefying in the flow stream going into the tank, and liquefying in the flight propellant tank itself. The different concept of operations were studied to assess the mass and power impacts of each concept. Additionally, the trade between insulation performance and cryocooler mass was performed to give performance targets for soft vacuum insulation development. It was found that liquefying within the flight propellant tank itself adds the least mass and power requirements to the mission.
Data Analysis & Statistical Methods for Command File Errors
This paper explains current work on modeling for managing the risk of command file errors. It is focused on analyzing actual data from a JPL spaceflight mission to build models for evaluating and predicting error rates as a function of several key variables. We constructed a rich dataset by considering the number of errors, the number of files radiated, including the number commands and blocks in each file, as well as subjective estimates of workload and operational novelty. We have assessed these data using different curve fitting and distribution fitting techniques, such as multiple regression analysis, and maximum likelihood estimation to see how much of the variability in the error rates can be explained with these. We have also used goodness of fit testing strategies and principal component analysis to further assess our data. Finally, we constructed a model of expected error rates based on the what these statistics bore out as critical drivers to the error rate. This model allows project management to evaluate the error rate against a theoretically expected rate as well as anticipate future error rates.
Performance Analysis of Airborne Photon-Counting Lidar Data in Preparation for the ICESat-2 Mission
Two airborne photon-counting laser altimeters have been deployed in direct support of National Aeronautics and Space Adminsitration (NASA's) upcoming Ice, Cloud, and land Elevation Satellite-2 (ICESat-2) mission. Multiple Altimeter Beam Experimental Lidar (MABEL) was developed specifically for ICESat-2 testing and development. MABEL data are used to simulate key aspects of the ICESat-2 measurement strategy and are critical to the development of the algorithms for geophysical data-product generation. Slope Imaging Multipolarization Photon-counting Lidar (SIMPL) is a NASA Goddard Space Flight Center instrument that has also been deployed in support of ICESat-2 performance discovery. Both instruments are photon-counting, small footprint laser altimeters that sample in both the 532- and 1064-nm wavelengths. And both instruments serve as a proxy for ICESat-2 operational performance and error assessment and a basis for the development of potential validation strategies. This paper provides an overview of how data from MABEL and SIMPL overflights have specifically provided the foundation for understanding the quality of ICESat-2 data and how we can plan to evaluate ICESat-2 products through comparison with other modalities of lidar data and/or groundtruth locations using ground fiducials.
Initial Trade Study for In-line Silver Sensor for Spacecraft Potable Water Systems
Ionic silver is currently baselined as the biocide for microbial control in potable water systems for future space exploration missions. In-line monitoring of silver ion concentration is desired for system feedback control to introduce and maintain sufficient and safe levels of biocide in the water. To date, NASA testing of silver biocide system prototypes has made use of an Ion-Selective Electrode (ISE) for in-line silver concentration measurements. However, known issues with ISE technology have continued to motivate a search for alternate sensor systems. Although devices capable of detecting silver are available for terrestrial applications, these systems are generally not well-suited for the unique demands of spaceflight. Desired attributes include: low weight, volume, and power consumption; stable, autonomous, and in-line measurement capability; long calibration lifetime; and limited maintenance requirements. This paper provides the results from a preliminary trade study conducted on three candidate silver sensor technologies: ISEs, Anodic Stripping Voltammetry (ASV), and Fiber Optic Chemical Sensors (FOCS). The review of these technologies includes the rationale for their selection, an overview of the principles of their operation, and a detailed assessment of their strengths and weaknesses relative to the anticipated requirements of future spacecraft applications. The study concluded that none of the currently-available versions of these technologies is suitable for immediate application to spacecraft systems; further technology development should be considered. To that end, recommendations for forward development work have been proposed and provided herein.
Human Factors Assessment of Disturbances to Scheduled Performance-Based Navigation Arrival Operations
The introduction of Performance-Based Navigation (PBN) specifications to air traffic management has resulted in many benefits during nominal operations, including shorter flight paths, reduced fuel costs, and improved terminal area arrival rates. However, these benefits become less noticeable during off-nominal operations where aircraft are routinely interrupted from staying on PBN procedures due to disturbances such as missed approaches. This human-in-the-loop (HITL) study used multiple types of disturbance events to perturb the arrival schedule. Perturbed schedules were managed with different types of schedule adjustments, including a condition with no adjustments. The study collected data on a host of dependent variables, including human factors measures on controller workload and system performance measures such as schedule nonconformance (nc). Initial analyses showed strong correlations between aggregated controller workload and aggregated nc, as well as benefits of both automatic and manual schedule adjustments for increasing system performance, such as reduced PBN procedure interruptions. The goal of this paper is to further test these initial findings. The results indicated that an increase in schedule nonconformance correlated with an increase in controller workload at specific time intervals, and automated schedule adjustments consistently reduced controller workload associated with nonconformance.
Risk Management for Dynamic Radioisotope Power Systems
The implementation of dynamic power conversion technology in Radioisotope Power Systems (RPS) for spaceflight has potential for improved specific power and efficiency, compared with existing Radioisotope Thermoelectric Generators (RTGs). This proposed expansion of current RPS technology necessitates a full exploration of the requirements, goals, and concerns related to risks in developing and deploying such systems. The nature of dynamic systems also presents a new set of challenges related to the presence of moving machinery not intrinsic to traditional RTG units. A general RPS risk management methodology is outlined, which is used to identify and assess the variables and operational scenarios introducing risk throughout the design, fabrication, and system integration processes. This paper will demonstrate how mission requirements for Dynamic RPS concepts (DRPS) drive decisions throughout the development process. This work will define the standard practices for decision making within the scope of the risks associated with DRPS hardware development and deployment in sensitive spacecraft near sensitive payloads. Examples of potential risk areas are analyzed for the proposed dynamic systems, and compared to those associated with traditional RTG technologies. This analysis shows the promise for DRPS systems to elevate and extend the capabilities for power systems used in future NASA missions.
Compatibility Tests Between the Mars Vehicle System Test Bed and RIMFAX Radar Antenna Prototype for the Mars 2020 Mission
NASA's Mars 2020 rover will carry a wideband (150 megahertz to 1200 megahertz) ground penetrating radar—RIMFAX (Radar Imager for Mars’ subsurFace eXperiment ), contributed by FFI (Forsvarets forskningsinstitutt) of Norway—to survey the subsurface geology of Mars. RIMFAX will take radar soundings while the rover drives across the Martian terrain, which presents possible compatibility issues between rover and radar operations. In order to study this risk, a prototype RIMFAX antenna was attached to the flight-analogous rover Vehicle System Test Bed (VSTB) in a mechanically representative location. The prototype antenna collected spectral and time-domain data across a variety of driving operations in order to assess the radar sensitivity to rover-generated noise. Conversely, the prototype antenna was driven while an engineering-model UHF (Ultra High Frequency) antenna used for rover telecom measured received in-band power to ensure that the rover hardware was not at risk of damage. Evaluation of the data by the instrument science team showed that while rover noise was apparent to the receiver, data post-processing would yield greater than 40 decibels margin to the science requirements. Similarly, power levels received by the UHF antenna were well below damage thresholds.
Mid-Course Correction Contingency Analysis for the James Webb Space Telescope
This investigation details two analyses performed as part of an early orbit contingency operations study related to the James Webb Space Telescope’s limited ability to maneuver in a sunward direction. First, contingency planning developed by the Flight Dynamics Team and shared with the Science and Operations Center to quickly assess the available timeline in the event of a delayed mid-course correction maneuver is presented. Second, the methods for recovering from a maneuver over-burn using observatory geometry to exploit the solar radiation pressure perturbation contributions from the large sunshield as well as adjusting the maneuver campaign to recover the observatory are examined.
NASA Radiation Operations Sources, Models, and Standards
Space radiation is one of the major challenges of spaceflight. Astronauts spending time in low Earth orbit, the lunar surface, deep space, and elsewhere will all be exposed to multiple space radiation sources. These sources include trapped radiation in Earth’s upper atmosphere, solar energetic particles, and the omnipresent galactic cosmic radiation, as well as non-ionizing radiation from inside and outside a vehicle or habitat. The Space Radiation Analysis Group (SRAG) at Johnson Space Center is responsible for ensuring astronauts are protected from short- and long-term risks of radiation exposure. This talk details the radiation operational standards employed by NASA.
Safety Review Process: International Space Station Program (Revision F)
The International Space Station (ISS) Program has developed a safety review process to execute its responsibilities for the overall integrated safety of the ISS. This process will assess the design and operations of the ISS hardware/elements(including visiting vehicles during integrated ISS operations)and its ground support equipment in accordance with the applicable safety requirements as specified in Section2.0.
Evidence-Based Process for Assessing Teamwork Competencies in Applicant Performance in High-Risk, Operational Occupations
Explore the source record for details and available documents.
Tri-Agency Reliability Engineering Post: Mission Disposal and Extension Assessment Guidance Addendum
The intent of this addendum is to support the guidance document, Tri-Agency Reliability Engineering Guidance: Post Mission Disposal and Extension Assessment (https://ntrs.nasa.gov/citations/20210024973). It is intended to further assist spacefaring entities in assessing their designs and operational plans for extending missions and Post Mission Disposal (PMD) by providing an hypothetical mission example.
Hayabusa2#’s Exploration to Asteroids 2001 CC21 and 1998 KY26 Provides Key Insights Into Planetary Defense
The Hayabusa2 extended mission, nicknamed Hayabusa2# (SHARP: Small Hazardous Asteroid Reconnaissance Probe), started its mission after the Hayabusa2 spacecraft successfully returned in December 2020 to the Earth with Ryugu's samples and released the Sample Return Capsule containing it. Hayabusa2#’s key operations include flying by Near Earth Asteroid (98943) 2001 CC21 and rendezvousing with Near-Earth Asteroid 1998 KY26. The flyby is planned to be in 2026, and the rendezvous will be in 2031. Detailed investigations of these targets enable maturing key knowledge and technologies necessary for planetary defense. This paper reviews the characteristics of these targets and strategies to maximize outcomes from the mission. The spacecraft will fly by 2001 CC21 at a speed of ~5 km/s in 2026. Given constraints on the spacecraft condition, not designed to perform a flyby operation, operational plans require careful assessments to maximize the proximity observations of this asteroid. The ~700 m diameter asteroid's shape is currently unknown, though lightcurve observations suggest the asteroid is elongated. While the spin pole is not constrained well, the spin period is about 5.02 h with uncertainties of 0.01 h [1]. The taxonomic class may be L-type, which implies the presence of Calcium-aluminum-rich inclusions (CAI), one of the primitive materials in the solar system [2], although there are studies suggesting an S-type. Therefore, this must be carefully examined. Photometric and spectroscopic observations will strongly constrain this asteroid’s properties. Our rendezvous target, 1998 KY26, is a ~30 m diameter roundish object spinning at a spin period of 10.7 min, which may represent one of the common groups of Near Earth Asteroids in size and composition that give a higher likelihood of threatening the Earth. Radar and optical observations reconstructed this asteroid's shape with high uncertainties and inferred that its surface composition might be similar to that of carbonaceous asteroids [3]. No spacecraft has ever visited such small bodies. Hayabusa2# visiting 1998 KY26 will be the first mission to document its geophysical properties, offering strong insights into what most frequent invaders look like [4].
Computational Aerothermal Modeling and Simulation of Hypersonic, Low-density Flows for the ADEPT Drag Modulated Aerocapture Mission
NASA Ames Entry Systems and Technology Division has been leading development and testing of the Adaptable, Deployable, Entry and Placement Technology (ADEPT). A teaming partnership with JPL has been established to study and develop a compelling application of the ADEPT mechanically deployable hypersonic decelerator as part of the Venus Drag Modulated Aerocapture (VDMA) JPL R&TD effort. The primary work of this activity is to develop a design tool for the ADEPT drag skirt (e.g. a CFD-anchored CBAERO model) that enables rapid estimation of aerothermal environments for a range of candidate trajectories. This capability will enable rapid feasibility trades and design assessments for early stage mission concept evaluation for ADEPT Drag Modulated Aerocapture applications. Results of using TPSizer provided an ADEPT carbon fabric design thickness of the required number of fabric layers needed for predicted aerothermal environments and still have sufficient fabric remaining for overall vehicle integrity. This resulted in aerothermal design closure of the ADEPT drag skirt. In addition, the similar methodology for Venus DMA was used to assess a similar DMA operation at Earth as part of a possible Technology Demonstration Mission (TDM) for ADEPT DMA. This analysis showed that there is a close similarity of design approaches for an Earth DMA TDM that would be applicable to Venus DMA mission designs.
Large Hybrid Electric Turboprop Freighter Opportunity
This paper describes a potential future opportunity for the development of a large hybrid electric turboprop freighter aircraft. The aircraft concept, enabling NASA and ARPA-E technology developments, an initial market and cost assessment, and a basic operational concept is presented.
Advanced Materials Testing Plan for the Space Suit Portable Life Support System
The Space Suit Portable Life Support System (PLSS) has a tight mass requirement to meet while also meeting other requirements for supporting a crewmember in space, on the Moon, or on Mars. To meet these requirements, atypical materials must be considered to close the mass budget allocations. However, many of these materials and processes are relatively new and untested. Therefore, initial analysis and testing of some new and advanced processes have been conducted following a roadmap presented last year. This material testing has focused primarily on thermoplastics, both additively manufactured and machined, to assess plating and fastening operations that will be required. These processes will provide additional strength and shielding capability typically only achieved with metallics. This testing has also helped to define a forward plan to certify these materials and processes for critical spaceflight applications. This report will review testing plated thermoplastics both for strength and thermal properties. It will also review fastener and fastening options and look at insert and fastener testing. It will also review state-of-the-art methods being considered elsewhere and some additional testing being conducted. Using the testing results researched here, there will be recommendations on applications for each of these types of methods going forward.