Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “model intercomparison”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Issues in Absolute Spectral Radiometric Calibration: Intercomparison of Eight Sources

The application of atmospheric models to AVIRIS and other spectral imaging data to derive surface reflectance requires that the sensor output be calibrated to absolute radiance. Uncertainties in absolute calibration are to be expected, and claims of 92% accuracy have been published. Measurements of accurate surface albedos and cloud absorption to be used in radiative balance calculations depend critically on knowing the absolute spectral-radiometric response of the sensor. The Earth Observing System project is implementing a rigorous program of absolute radiometric calibration for all optical sensors. Since a number of imaging instruments that provide output in terms of absolute radiance are calibrated at different sites, it is important to determine the errors that can be expected among calibration sites. Another question exists about the errors in the absolute knowledge of the exoatmospheric spectral solar irradiance.

Goetz, Alexander F. H.↗

An Intercomparison and Evaluation of Aircraft-Derived and Simulated CO from Seven Chemical Transport Models During the TRACE-P Experiment

Four global scale and three regional scale chemical transport models are intercompared and evaluated during NASA's TRACE-P experiment. Model simulated and measured CO are statistically analyzed along aircraft flight tracks. Results for the combination of eleven flights show an overall negative bias in simulated CO. Biases are most pronounced during large CO events. Statistical agreements vary greatly among the individual flights. Those flights with the greatest range of CO values tend to be the worst simulated. However, for each given flight, the models generally provide similar relative results. The models exhibit difficulties simulating intense CO plumes. CO error is found to be greatest in the lower troposphere. Convective mass flux is shown to be very important, particularly near emissions source regions. Occasionally meteorological lift associated with excessive model-calculated mass fluxes leads to an overestimation of mid- and upper- tropospheric mixing ratios. Planetary Boundary Layer (PBL) depth is found to play an important role in simulating intense CO plumes. PBL depth is shown to cap plumes, confining heavy pollution to the very lowest levels.

Kiley, C. M.↗

A preliminary intercomparison between numerical upper wind forecasts and research aircraft measurements of jet streams

During the past several years, research on the structure of extra-tropical jet streams has been carried out with direct measurements with instrumented research aircraft from the National Center for Atmospheric Research (NCAR). These measurements have been used to describe the wind, temperature, turbulence and chemical characteristics of jet streams. A fundamental question is one of assessing the potential value of existing operational numerical forecast models for forecasting the meteorological conditions along commercial aviation flight routes so as to execute Minimum Flight Time tracks and thus obtain the maximum efficiency in aviation fuel consumption. As an initial attempt at resolving this question, the 12 hour forecast output from two models was expressed in terms of a common output format to ease their intercomparison. The chosen models were: (1) the Fine-Mesh Spectral hemispheric and (2) the Limited Area Fine Mesh (LFM) model.

Shapiro, M. A.↗

The Continuous Intercomparison of Radiation Codes (CIRC): Phase I Cases

CIRC aspires to be the successor to ICRCCM (Intercomparison of Radiation Codes in Climate Models). It is envisioned as an evolving and regularly updated reference source for GCM-type radiative transfer (RT) code evaluation with the principle goal to contribute in the improvement of RT parameterizations. CIRC is jointly endorsed by DOE's Atmospheric Radiation Measurement (ARM) program and the GEWEX Radiation Panel (GRP). CIRC's goal is to provide test cases for which GCM RT algorithms should be performing at their best, i.e, well characterized clear-sky and homogeneous, overcast cloudy cases. What distinguishes CIRC from previous intercomparisons is that its pool of cases is based on observed datasets. The bulk of atmospheric and surface input as well as radiative fluxes come from ARM observations as documented in the Broadband Heating Rate Profile (BBHRP) product. BBHRP also provides reference calculations from AER's RRTM RT algorithms that can be used to select the most optimal set of cases and to provide a first-order estimate of our ability to achieve radiative flux closure given the limitations in our knowledge of the atmospheric state.

Oreopoulos, Lazaros↗

Simulation of High-Latitude Hydrological Processes in the Torne-Kalix Basin: PILPS Phase 2(e): Equivalent Model Representation and Sensitivity Experiments - 3

The Project for Intercomparison of Land Surface Parameterization Schemes (PILPS) Phase 2(e) showed that in cold regions the annual runoff production in Land Surface Schemes (LSSs) is closely related to the maximum snow accumulation, which in turn is controlled in large part by winter sublimation. To help further explain the relationship between snow cover, turbulent exchanges and runoff production, a simple equivalent model-(SEM) was devised to reproduce the seasonal and annual fluxes simulated by 13 LSSs that participated in PILPS Phase 2(e). The design of the SEM relates the annual partitioning of precipitation and energy in the LSSs to three primary parameters: snow albedo, effective aerodynamic resistance and evaporation efficiency. Isolation of each of the parameters showed that the annual runoff production was most sensitive to the aerodynamic resistance. The SEM was somewhat successful in reproducing the observed LSS response to a decrease in shortwave radiation and changes in wind speed forcings. SEM parameters derived from the reduced shortwave forcings suggested that increased winter stability suppressed turbulent heat fluxes over snow. Because winter sensible heat fluxes were largely negative, reductions in winter shortwave radiation imply an increase in annual average sensible heat.

Bowling, Laura C.↗

Introduction and data summary, chapter 5

A subset of data representing most of the participating model groups was discussed and reviewed. The results are presented for intercomparisons of that subset of data. Subsequent to the workshop, the various modeling groups had the opportunity to either update or add to the data sets discussed at the workshop. The overall revised data sets as of December 1988 are presented. Data from all the models (where available) are grouped according to: (1) photochemistry and radiation (photodissociation coefficients, and ultraviolet heating and infrared cooling); (2) transport (net radiative heating, tropospheric source tracer experiment, time-dependent source conserved tracer experiment, stratospheric source tracer experiment, and O3 column); (3) current atmosphere (integrated columns of trace gases, Cl(y) and NO(y), nitrogen gases, chlorine gases, O(x) and HO(x) gases, and source gases); and (4) perturbed circulations and temperatures. The data presented provide a detailed summary of the two-dimensional picture of the atmosphere as seen by current atmospheric models.

Source record↗

The Fifth Calibration/Data Product Validation Panel Meeting

The minutes and associated documents prepared from presentations and meetings at the Fifth Calibration/Data Product Validation Panel meeting in Boulder, Colorado, April 8 - 10, 1992, are presented. Key issues include (1) statistical characterization of data sets: finding statistics that characterize key attributes of the data sets, and defining ways to characterize the comparisons among data sets; (2) selection of specific intercomparison exercises: selecting characteristic spatial and temporal regions for intercomparisons, and impact of validation exercises on the logistics of current and planned field campaigns and model runs; and (3) preparation of data sets for intercomparisons: characterization of assumptions, transportable data formats, labeling data files, content of data sets, and data storage and distribution (EOSDIS interface).

Source record↗

Upper-Stratospheric Ozone Trends 1979-1998

Extensive analyses of ozone observations between 1978 and 1998 measured by Dobson Umkehr, Stratospheric Aerosol and Gas Experiment (SAGE) I and II, and Solar Backscattered Ultraviolet (SBUV) and (SBUV)/2 indicate continued significant ozone decline throughout the extratropical upper stratosphere from 30-45 km altitude. The maximum annual linear decline of -0.8 +/- 0.2 %/yr(2sigma) occurs at 40 km and is well described in terms of a linear decline modulated by the 11-year solar variation. The minimum decline of -0.110.1% yr-1(2o) occurs at 25 km in midlatitudes, with remarkable symmetry between the Northern and Southern Hemispheres at 40 km altitude. Midlatitude upper-stratospheric zonal trends exhibit significant seasonal variation (+/- 30% in the Northern Hemisphere, +/- 40% in the Southern Hemisphere) with the most negative trends of -1.2%/yr occurring in the winter. Significant seasonal trends of -0.7 to -0.9%/yr occur at 40 km in the tropics between April and September. Subjecting the statistical models used to calculate the ozone trends to intercomparison tests on a variety of common data sets yields results that indicate the standard deviation between trends estimated by 10 different statistical models is less than 0.1%/yr in the annual-mean trend for SAGE data and less than 0.2%/yr in the most demanding conditions (seasons with irregular, sparse data) [World Meteorological Organization (WMO), 1998]. These consistent trend results between statistical models together with extensive consistency between the independent measurement-system trend observations by Dobson Umkehr, SAGE I and II, and SBUV and SBUV/2 provide a high degree of confidence in the accuracy of the declining ozone amounts reported here. Additional details of ozone trend results from 1978 to 1996 (2 years shorter than reported here) along with lower-stratospheric and tropospheric ozone trends, extensive intercomparisons to assess relative instrument drifts, and retrieval algorithm details are given by WMO [1998].

Newchurch, M. J.↗

Methods for Validation and Intercomparison of Remote Sensing and In situ Ice Water Measurements: Case Studies from CRYSTAL-FACE and Model Results

Remote sensing observations, such as those from AURA, are necessary to understand the role of cirrus in determining the radiative and humidity budgets of the upper troposphere. Using these measurements quantitatively requires comparisons with in situ measurements that have previously been validated. However, a direct comparison of remote and in situ measurements is difficult due to the requirement that the spatial and temporal overlap be sufficient in order to guarantee that both instruments are measuring the same air parcel. A difficult as this might be for gas phase intercomparisons, cloud inhomogeneities significantly exacerbate the problem for cloud ice water content measurements. The CRYSTAL-FACE mission provided an opportunity to assess how well such intercomparisons can be performed and to establish flight plans that will be necessary for validation of future satellite instruments. During CRYSTAL-FACE, remote and in situ instruments were placed on different aircraft (NASA's ER-2 and WB-59, and the two planes flew in tandem so that the in situ payload flew in the field of view of the remote instruments. We show here that, even with this type of careful flight planning, it is not always possible to guarantee that remote and in situ instruments are viewing the same air parcel. We use ice water data derived from the in situ Harvard Total Water (HV-TW) instrument, and the remote Goddard Cloud Radar System (CRS) and show that agreement between HV-TW and CRS is a strong function of the horizontal separation and the time delay between the aircraft transects. We also use a cloud model to simulate possible trajectories through a cloud and evaluate the use of statistical analysis in determining the agreement between the two instruments. This type of analysis should guide flight planning for future intercomparison efforts, whether for aircraft or satellite-borne instrumentation.

Sayres, D.S.↗

Object-Based Evaluation of Tropical Precipitation Systems in DYAMOND Simulations over the Maritime Continent

The present study uses an object-based evaluation metric to examine the precipitation bias over the Maritime Continent in the global cloud-resolving models. We specifically focus on the difference between the models that directly resolve convection and those using convection parameterization. The 40-day hindcast experiments of the DYnamics of the Atmospheric general circulation Modeled On Non-hydrostatic Domain (DYAMOND) intercomparison project are evaluated against the high-resolution satellite rainfall products. The hindcast of the Central Weather Bureau Global Forecast System (CWBGFS) under the DYAMOND protocol is also included. The results indicate that most models simulate insufficient numbers of large precipitation system [object-based precipitation system (OPS), > 370 km in scale], indicating weaker convection organization. The observation indicates that the maximum precipitation within the OPS intensifies with increasing object size. All of the models capture this positive relationship, but most of them overestimate the sensitivity. Most of the models overestimate both the frequency and intensity of small OPS (< 160 km), except for the models with convection parameterization [i.e., CWBGFS, European Centre for Medium-Range Weather Forecasts Integrated Forecasting System (IFS)-9 km]. Although most of the models can reproduce the observed peak time of diurnal precipitation over the land area in the Maritime Continent, the simulated fractional contribution of different sizes of OPS to the total precipitation varies from model to model, and their peak times do not follow the observed ones with delayed peak times as the size of OPS increases from small, mid-size, to large categories. Most of the models reasonably capture the mean diurnal cycle peak time, but only the models with convection parameterization and Model for Prediction Across Scales (MPAS) can represent the diurnal evolution of fractional contribution from different OPSs. The implications of the current results to the upscale processes of the tropical convection systems in the global models are also discussed.

54 ENVIRONMENTAL SCIENCES↗

input4MIPs.CMIP6Plus.PCMDI.PCMDI-AMIP-1-1-9

CMIP6Plus Forcing Datasets (input4MIPs). This dataset PCMDI-AMIP-1-1-9 is part of input4MIPs under dataset_category: "['SSTsAndSeaIce']". More information about the dataset can be found at the following links: https://pcmdi.llnl.gov/mips/amip https://input4mips-controlled-vocabularies-cvs.readthedocs.io/en/stable/database-views/input4MIPs_source-id_CMIP7.html https://input4mips-controlled-vocabularies-cvs.readthedocs.io/en/stable/dataset-overviews/ The dataset is available at: https://esgf-node.ornl.gov/search/input4mips/?mip_era=CMIP6Plus&activity_id=input4MIPs&institution_id=PCMDI&source_id=PCMDI-AMIP-1-1-9

54 ENVIRONMENTAL SCIENCES↗

Intercomparison of Atmospheric Radiation Schemes for the Lower Martian Atmosphere

Interpretation of the vast data flow from the recent and ongoing Mars missions requires extensive modeling activity to support the investigations and conclusions drawn from the observations. We have initiated a campaign to compare atmospheric radiation schemes for the lower Martian atmosphere with leastcompromise reference line-by-line calculations (Meadows and Crisp 1996, Crisp 1986). By using fixed reference conditions we are introducing an intercomparison framework to enable atmospheric modeling teams to compare their modeling results with the reference line-by-line calculations, and to improve their models. The atmosphere of Mars is thin and therefore its response to local radiative forcing is strong when compared to that of the Earth s troposphere. Airborne dust and also the water vapor give significant contributions to the radiative fluxes. Thus models of the Martian atmosphere should have fairly accurate radiative transfer (RT) algorithms. This is specifically important for the net radiative flux at the surface, which is the main driver for the surface temperature evolution, since the surface turbulent fluxes are small due to the thin atmosphere (e.g. Haberle et al. 1993, Savij arvi 1991a, Savij arvi 1991b, Savij arvi 1999). However, the accuracy of the RT schemes has not been rigorously tested in many cases as reference calculations have been rare. We introduce a set of reference cases for Martian atmospheric conditions with profiles for temperature, pressure, dust optical depth (Conrath 1975, Clancy et al. 1995, OckertBell et al. 1997, Smith et al. 2000), water, CO2,O3,CO and O2 (Table 1). The reference atmosphere uses a diurnally and globally averaged thermal structure derived from Mariner 9 IRIS observations acquired during late southern summer. Thermal structures for nighttime and daytime conditions will be included shortly. Computationally expensive reference simulations were performed by applying a spectrum resolving (line-by-line multiple scattering) model, SRM, to give the least-compromise base for comparisons. We call for other groups to join in future comparisons. This resembles the International Comparison of Radiation Codes for Climate Models (ICRCCM; e.g. Ellingson and Fouquart 1991, Ellingson et al. 1991). The ICRCCM led to many improvements in the Earth GCM radiation codes. The intercomparison framework presented in this paper is a step toward that direction for Mars. We have already five modeling teams participating in this intercomparison exercice. Additional teams investigating the Martian atmosphere are cordially invited to join this effort of comparing the radiation schemes in fixed conditions. The results achieved will be reported and some additional features to be included in the intercomparison will be discussed.

A-M Harri↗

Global Intercomparison of 12 Land Surface Heat Flux Estimates

A global intercomparison of 12 monthly mean land surface heat flux products for the period 1993-1995 is presented. The intercomparison includes some of the first emerging global satellite-based products (developed at Paris Observatory, Max Planck Institute for Biogeochemistry, University of California Berkeley, University of Maryland, and Princeton University) and examples of fluxes produced by reanalyses (ERA-Interim, MERRA, NCEP-DOE) and off-line land surface models (GSWP-2, GLDAS CLM/ Mosaic/Noah). An intercomparison of the global latent heat flux (Q(sub le)) annual means shows a spread of approx 20 W/sq m (all-product global average of approx 45 W/sq m). A similar spread is observed for the sensible (Q(sub h)) and net radiative (R(sub n)) fluxes. In general, the products correlate well with each other, helped by the large seasonal variability and common forcing data for some of the products. Expected spatial distributions related to the major climatic regimes and geographical features are reproduced by all products. Nevertheless, large Q(sub le)and Q(sub h) absolute differences are also observed. The fluxes were spatially averaged for 10 vegetation classes. The larger Q(sub le) differences were observed for the rain forest but, when normalized by mean fluxes, the differences were comparable to other classes. In general, the correlations between Q(sub le) and R(sub n) were higher for the satellite-based products compared with the reanalyses and off-line models. The fluxes were also averaged for 10 selected basins. The seasonality was generally well captured by all products, but large differences in the flux partitioning were observed for some products and basins.

Jimenez, C.↗

Intercomparison of Global Precipitation Products: The Third Precipitation Intercomparison Project (PIP-3)

A set of global, monthly rainfall products has been intercompared to understand the quality and utility of the estimates. The products include 25 observational (satellite-based), four model and two climatological products. The results of the intercomparison indicate a very large range (factor of two or three) of values when all products are considered. The range of values is reduced considerably when the set of observational products is limited to those considered quasi-standard. The model products do significantly poorer in the tropics, but are competitive with satellite-based fields in mid-latitudes over land. Over ocean, products are compared to frequency of precipitation from ship observations. The evaluation of the observational products point to merged data products (including rain gauge information) as providing the overall best results.

Adler, Robert F.↗

Intercomparison of Global Precipitation Products: The Third Precipitation Intercomparison Project (PIP-3)

A set of global, monthly rainfall products has been intercompared to understand the quality and utility of the estimates. The products include 25 observational (satellite-based), four model and two climatological products. The results of the intercomparison indicate a very large range (factor of two or three) of values when all products are considered. The range of values is reduced considerably when the set of observational products is limited to those considered quasi-standard. The model products do significantly poorer in the tropics, but are competitive with satellite-based fields in mid-latitudes over land. Over ocean, products are compared to frequency of precipitation from ship observations. The evaluation of the observational products point to merged data products (including rain gauge information) as providing the overall best results.

Adler, Robert F.↗

Simple atmospheric perturbation models for sonic-boom-signature distortion studies

Sonic-boom propagation from flight level to ground is influenced by wind and speed-of-sound variations resulting from temperature changes in both the mean atmospheric structure and small-scale perturbations. Meteorological behavior generally produces complex combinations of atmospheric perturbations in the form of turbulence, wind shears, up- and down-drafts and various wave behaviors. Differences between the speed of sound at the ground and at flight level will influence the threshold flight Mach number for which the sonic boom first reaches the ground as well as the width of the resulting sonic-boom carpet. Mean atmospheric temperature and wind structure as a function of altitude vary with location and time of year. These average properties of the atmosphere are well-documented and have been used in many sonic-boom propagation assessments. In contrast, smaller scale atmospheric perturbations are also known to modulate the shape and amplitude of sonic-boom signatures reaching the ground, but specific perturbation models have not been established for evaluating their effects on sonic-boom propagation. The purpose of this paper is to present simple examples of atmospheric vertical temperature gradients, wind shears, and wave motions that can guide preliminary assessments of nonturbulent atmospheric perturbation effects on sonic-boom propagation to the ground. The use of simple discrete atmospheric perturbation structures can facilitate the interpretation of the resulting sonic-boom propagation anomalies as well as intercomparisons among varied flight conditions and propagation models.

Ehernberger, L. J.↗

Bio-Optical Measurement and Modeling of the California Current and Polar Oceans

This Sensor Intercomparison and Merger for Biological and Interdisciplinary Oceanic Studies (SIMBIOS) project contract supports in situ ocean optical observations in the California Current, Southern Ocean, Indian Ocean as well as merger of other in situ data sets we have collected on various global cruises supported by separate grants or contracts. The principal goals of our research are to validate standard or experimental products through detailed bio-optical and biogeochemical measurements, and to combine ocean optical observations with advanced radiative transfer modeling to contribute to satellite vicarious radiometric calibration and advanced algorithm development. In collaboration with major oceanographic ship-based observation programs funded by various agencies (CalCOFI, US JGOFS, NOAA AMLR, INDOEX and Japan/East Sea) our SIMBIOS effort has resulted in data from diverse bio-optical provinces. For these global deployments we generate a high-quality, methodologically consistent, data set encompassing a wide-range of oceanic conditions. Global data collected in recent years have been integrated with our on-going CalCOFI database and have been used to evaluate Sea-Viewing Wide Field-of-view Sensor (SeaWiFS) algorithms and to carry out validation studies. The combined database we have assembled now comprises more than 700 stations and includes observations for the clearest oligotrophic waters, highly eutrophic blooms, red-tides and coastal case two conditions. The data has been used to validate water-leaving radiance estimated with SeaWiFS as well as bio optical algorithms for chlorophyll pigments. The comprehensive data is utilized for development of experimental algorithms (e.g., high-low latitude pigment transition, phytoplankton absorption, and cDOM).

Mitchell, B. Greg↗