Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “methane conversion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Comparative techno-economic analysis of synthetic renewable natural gas production via reactive CO 2 capture and conversion

Reactive CO 2 capture and conversion (RCC) is an emerging carbon management strategy that integrates CO 2 capture and conversion and avoids intermediate CO 2 purification. In this study, we design an RCC process to capture atmospheric CO 2 and react it with renewable hydrogen to produce synthetic renewable natural gas (SRNG), which serves as a carbon-neutral energy source and a chemical form of long-duration renewable energy storage. We assess the technological potential of RCC through process modeling, techno-economic, carbon footprint, and sensitivity analyses. Our findings demonstrate that RCC offers energy savings and comparable cost to separated capture and conversion processes. The cost is dominated by renewable hydrogen and material replacement cost. SRNG produced via RCC is competitive with existing low-carbon natural gas technologies and presents a promising low-cost option for long-duration energy storage. This work highlights the potential for deploying RCC technologies within a circular carbon economy and the scientific and technical challenges that must be overcome for material and technology developers.

03 NATURAL GAS↗

Roundtable on Foundational Science for Carbon-Neutral Hydrogen Technologies (Technology Status Document)

This document summarizes the status of carbon-neutral hydrogen production, storage and transport, and utilization. The state of the art in the implementation, limitations, and challenges of these technologies are summarized. Sources of hydrogen are broadly categorized as hydrcoarbons or water and the processes used to convert these sources to hydrogen as catalytic, thermochemical, or electrochemical. Catalytic steam methane reforming of methane is the dominant process today. Other processes have smaller production volumes and the technology is less mature, but are being deployed at increasing rates, most notably water electrolyzers for hydrogen fueling stations. Efficient transport and storage of hydrogen is one of the major challenges facing a hydrogen-based energy economy. This arises in part from its low volumetric energy density necessitating very high pressures or cryogenic temperatures to store sufficient amounts for practical applications. High-pressure compressed hydrogen cylinders are the incumbent hydrogen storage technology for applications such as light-duty fuel cell electric vehicles, for example. The storage of hydrogen in materials or in chemicals is being pursued to address the issues associated with compression, such as parasitic energy loss and weight, size, and cost of storage containers. The complex nature of the chemical and physical processes involved in the uptake, storage, and release of hydrogen has slowed the discovery of suitable hydrogen storage materials. Both small and large-scale storage face the challenge of embrittlement of the storage media by hydrogen. There is a myriad of uses of hydrogen offering the promises of improving the efficiency of various applications and reducing or eliminating CO 2 emissions. These range from direct electrochemical conversion to electricity to power vehicles and grid-level stationary applications to combustion to production of chemicals and commodities. One of the most impactful applications in terms of reduction of CO 2 emissions is fuel cell passenger vehicles and heavy-duty vehicles such as class 8 trucks. The challenges facing widespread deployment of fuel cells, beyond the major hurdle of the lack of a hydrogen distribution infrastructure, are cost and durability, primarily related to the precious metal cathode catalyst and its durability. The other uses of hydrogen from conversion to hydrocarbons, polymer upcycling, and upgrading of bio-oils are at varying stages of maturity and also face fundamental challenges associated with catalytic processes and materials.

08 HYDROGEN↗

Influence of Energy and Electron Availability on In Vivo Methane and Hydrogen Production by a Variant Molybdenum Nitrogenase

ABSTRACT The anoxygenic phototrophic bacterium Rhodopseudomonas palustris produces methane (CH 4 ) from carbon dioxide (CO 2 ) and hydrogen (H 2 ) from protons (H + ) when it expresses a variant form of molybdenum (Mo) nitrogenase that has two amino acid substitutions near its active site. We examined the influence of light energy and electron availability on in vivo production of these biofuels. Nitrogenase activity requires large amounts of ATP, and cells exposed to increasing light intensities produced increasing amounts of CH 4 and H 2 . As expected for a phototroph, intracellular ATP increased with increasing light intensity, but there was only a loose correlation between ATP content and CH 4 and H 2 production. There was a much stronger correlation between decreased intracellular ADP and increased gas production with increased light intensity, suggesting that the rate-limiting step for CH 4 and H 2 production by R. palustris is inhibition of nitrogenase by ADP. Increasing the amounts of electrons available to nitrogenase by providing cells with organic alcohols, using nongrowing cells, blocking electrons from entering the Calvin cycle, or blocking H 2 uptake resulted in higher yields of H 2 and, in some cases, CH 4 . Our results provide a more complete understanding of the constraints on nitrogenase-based production of biofuels. IMPORTANCE A variant form of Mo nitrogenase catalyzes the conversion of CO 2 and protons to the biofuels CH 4 and H 2 . A constant supply of electrons and ATP is needed to drive these reduction reactions. The bacterium R. palustris generates ATP from light and has a versatile metabolism that makes it ideal for manipulating electron availability intracellularly. We therefore explored its potential as a biocatalyst for CH 4 and H 2 production. We found that intracellular ADP had a major effect on biofuel production, more pronounced than the effect caused by ATP. This is probably due to inhibition of nitrogenase activity by ADP. In general, the amount of CH 4 produced by the variant nitrogenase in vivo was affected by electron availability much less than was the amount of H 2 produced. This study shows the nature of constraints on in vivo biofuel production by variant Mo nitrogenase.

solar (fuels), biofuels (including algae and bioma↗

Kinetics of low-temperature methane activation on IrO 2 (1 1 0): Role of local surface hydroxide species

The ability of the IrO 2 (1 1 0) surface to promote CH 4 activation at low temperatures (~150 K) suggests possibilities for developing IrO 2 -based catalysts to selectively convert light alkanes to high-value chemicals. In this study, we present experimental results and microkinetic simulations, based on density functional theory (DFT) calculations, of temperature programmed reaction spectra (TPRS) obtained for CH 4 σ-complexes adsorbed on IrO 2 (1 1 0), and focus on clarifying how surface OH groups modify the branching between CH 4 desorption, activation and subsequent reactions during TPRS. Our DFT results predict that surface OH groups strongly destabilize CH 4 σ-complexes on IrO 2 (1 1 0) in addition to deactivating surface O-atoms that are needed to achieve CH 4 activation at low temperature. We demonstrate that a microkinetic model that incorporates the influence of surface OH groups on the CH 4 binding and reactivity reproduces experimental TPRS results which show that adsorbed CH 4 σ-complexes preferentially dissociate at low CH 4 coverage, but that an increasing fraction of the adsorbed CH 4 desorbs at low temperature (~120 K) with increasing initial CH 4 or H coverage. The simulations reveal that low-temperature CH4 desorption during TPRS arises primarily from CH 4 σ-complexes that are kinetically-trapped between adjacent surface OH groups, and are thus destabilized and unable to access reactive O-atoms. In addition, when the effect of adjacent OH groups is incorporated we find that the PBE-D3 functional incorporating dispersion provides CH 4 binding energies that agree more closely with that obtained from the TPRS experiments. Overall, our results demonstrate that the local effect of adjacent OH groups must be incorporated into any microkinetic models to properly capture the selectivity between extensive and partial oxidation in alkane conversion on IrO 2 (1 1 0) under reaction conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Formation of (Rh–Fe)–FeO x Complex Sites Enables Methanol Synthesis from CO 2

Here, we addressed the challenges of designing catalysts for selective CO 2 hydrogenation by incorporating oxide Fe species onto Rh nanoparticles. Nanoscopic FeO x domains created a “reverse catalyst” structure (i.e., a metal oxide supported on a metal) that increased the density of interfacial sites compared to traditional supported catalysts. The contact between the metal nanoparticle and the oxide overlayer induced the formation of a surface Rh-Fe alloy that stabilize methoxy groups while suppressing hydrogenolysis to methane. Sites at FeO x -metal interfaces interact with CO 2 sevenfold stronger than sites on metal surfaces, show larger energy barriers to cleave the C-O bonds, and offer a barrierless pathway for hydrogenation of methoxy species to methanol. Consequently, the multifunctional sites over FeO x /Rh-Fe catalysts highlight and meet the requirements of a selective methanol catalyst: strong interaction with CO 2 to ensure high density of transition states; metal sites to activate and make hydrogen available to surface intermediates; and high energy barriers for C-O bond cleavage to form carbides. These synthesis and catalytic chemistries, demonstrated for Rh-Fe-FeO x interfaces, enable us to overcome the limitations to the design of methanol production catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Theoretical assessments of CO 2 activation and hydrogenation pathways on transition-metal surfaces

Carbon dioxide (CO 2 ) hydrogenation on transition-metal active sites offers a promising carbon utilization route toward mitigating greenhouse gas emissions. C 1 products are often formed in parallel during CO 2 hydrogenation, prompting investigations into the intrinsic properties of transition metals that drive activity and product selectivity. Here, in this work, close-packed surfaces of a selection of transition-metal catalysts (Ni, Co, Rh, Ru, Pd, and Pt) were studied with density functional theory (DFT) calculations to understand their fundamental reactivities for CO 2 transformation reactions. Results indicate that CO 2 conversion proceeds through CO* formation and hydrogenation to form C 1 products (* denotes an adsorbed species). Ni, Co, Rh, and Ru favor CO/CH 4 formation, while Pd and Pt favor CO/CH 3 OH formation. The ability of a metal to dissociate C-O bonds drives selectivity between CH 4 and CH 3 OH, while competition between CO* desorption and surface hydrogenation describes CO selectivities. The C-O bond dissociation steps often impose the highest barrier along CH 4 formation reaction profiles, suggesting their kinetic relevance for CH 4 formation rates. The provided DFT-derived data sets detail a comprehensive reaction network of elementary steps relevant to C 1 chemistries, ultimately offering a benchmark for insights into design strategies for materials that exploit transition-metal active sites in carbon capture or utilization processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Changing Interactions Between Trace Gas Fluxes, Belowground Chemistry, and Plant Traits Across an Arctic Thermokarst Landscape

Arctic permafrost soils are increasingly subject to thermokarst that is, abrupt ground subsidence caused by thaw. Wetlands can form within these depressions, leading to changes in organic matter decomposition and gas fluxes (CO 2 , CH 4 , N 2 O, NH 3 ). Thermokarst wetlands tend to be dominated by graminoids, while surrounding upland tussock tundra tends to be dominated by mixed communities of shrubs and graminoids. Here, to investigate how thermokarst alters the land-atmosphere exchange of C and N gases in Arctic tundra, we analyzed soil, porewater, above- and belowground biomass, and measured gas fluxes across dominant plant functional types (PFTs) within a lowland thermokarst wetland and adjacent upland tussock tundra. Both locations were overall sinks of CO 2 , sources of CH 4 , and sources of both N 2 O and NH 3 . We found that thermokarst wetlands emitted enough CH 4 to generate a positive radiative forcing in CO 2 equivalents (+1.2 μmol m −2 s −1 CO 2 -eq), counteracting the high CO 2 uptake. In contrast, the upland tussock tundra had a net negative radiative forcing (−1.2 μmol m −2 s −1 CO 2 -eq). Differences in gas flux and soil chemistry between upland and lowland are primarily driven by flooded conditions present in thermokarst wetland. Additionally, root biomass from graminoids across both lowlands and uplands significantly correlated with CH 4 fluxes, supporting previous observations of plant-mediated transport of CH 4 . Graminoid cover was correlated with increases in low molecular weight dissolved organic carbon, possibly associated with root exudates that fuel methanogenesis. Forb cover in the upland tussock tundra was significantly correlated with nine soil chemical variables, indicating that forbs may influence local soil chemistry or conversely, that soil chemistry controls where forbs grow. Overall, our findings indicate the variability in gas fluxes in the upland tussock tundra is partially controlled by PFT cover, while thermokarst wetlands emit enough CH 4 to counteract CO 2 uptake, with implications for carbon budget changes in Arctic systems.

Land-atmosphere feedback↗

Flame Synthesis of Nanosized Cu-Ce-O, Ni-Ce-O, and Fe-Ce-O Catalysts for the Water-Gas Shift (WGS) Reaction

A flame synthesis method has been used to prepare nanosized, high-surface-area Cu-Ce-O, Ni-Ce-O, and Fe-Ce-O catalysts from aqueous solutions of metal acetate precursors. The particles were formed by vaporization of the precursors followed by reaction and then gas to particle conversion. The specific surface areas of the synthesized powders ranged from 127 to 163 m{sup 2}/g. High-resolution transmission electron microscope imaging showed that the particle diameters for the ceria materials are in the range of 3-10 nm, and a thin layer of amorphous material was observed on the surface of the particles. The presence and surface enrichment of the transition-metal oxides (CuO, NiO, and Fe{sub 2}O{sub 3}) on the ceria particles were detected using X-ray photoelectron spectroscopy. Electron energy-loss spectroscopic studies suggest the formation of a core-shell structure in the as-prepared particles. Extended X-ray absorption fine structure studies suggest that the dopants in all M-Ce-O systems are almost isostructural with their oxide counterparts, indicating the doping materials form separate oxide phases (CuO, Fe{sub 2}O{sub 3}, NiO) within the host matrix (CeO{sub 2}). Etching results confirm that most of the transition-metal oxides are present on the surface of CeO{sub 2}, easily dissolved by nitric acid. The performance of the flame-synthesized catalysts was examined toward water-gas shift (WGS) activity for fuel processing applications. The WGS activity of metal ceria catalysts decreases in the order Cu-Ce-O > Ni-Ce-O > Fe-Ce-O > CeO{sub 2} with a feed mixture having a hydrogen to carbon monoxide (H{sub 2}/CO) ratio of 1. There was no methane formation for these catalysts under the tested conditions.

03 NATURAL GAS↗

Technology Demonstration of a High-Pressure Swirl Oxy-Coal Combustor

This technical report presents the exploration of the design and prototyping of a High-Pressure Swirl Oxy-coal Combustor. Pressurized oxy-coal combustion systems have the potential to improve efficiency along with an increased carbon capture rate. Reduction of flue gas at higher pressure, smaller system size, and capital cost reductions render high-pressure oxy-coal systems particularly attractive as next-generation energy-producing systems. High-pressure oxy-coal combustion systems are a recent concept, and thus operability issues of combustor designs for such systems are not fully understood. Significant challenges exist to maintain oxy-coal combustion stability at elevated pressure and a high CO 2 diluent environment. Although a body of knowledge exists for high-pressure oxygen combustion in rocket engines (or similar applications), it is yet to be strategized how these fundamental concepts can be translated to low-temperature CO 2 diluent combustion regimes. The realization of the pressurized oxy-coal based systems requires combustor components to be designed and demonstrated for an operating pressure over 10 bar. However, pressurized oxy-coal combustor design information at this pressure range and scale relevant to validate those proposed systems is currently limited. Experimental data from MWth scale oxy-coal combustors are needed to identify the optimal trade-off between net efficiency and systems size. The proposed effort is aimed at demonstrating a 1 MWth down-fired swirl Oxy-Coal combustor and investigate the interrelation between combustor operating conditions (pressure; flame stability; flue gas recirculation ratio) and conversion efficiencies to minimize oxygen requirements. One of the key challenges is to configure burner design (i.e., swirl number and injector) and operating conditions for high-pressure oxy-coal combustion systems. These experiments differ from current systems partly due to the high theoretical flame temperature and related burner operability issues associated with oxy-combustion. An ASPEN PLUS® model study for 550 MWe TIPS and ENEL pressurized oxy-coal systems with CO 2 recirculation was performed to evaluate system design, subsystems sizing, and operating condition determination. The system analysis effort included TRL and technology gap determination of subsystems and critical components. This information was scaled to develop design requirements (design pressure and flue gas recirculation: RR Flue Gas = $\frac{m_{flue}}{m_{total}}$) for the 1 MWth combustor. The effects of a wide range of carbon dioxide recirculation ratios on the thermal efficiency of ENEL and TIPS cycles are studied. The pressure of 10 bar and 80 bar are used for ENEL and TIPS cycles, respectively. The thermal efficiency of ENEL is significantly higher than the efficiency of TIPS at a pressure of less than 10 bar. The insights from system analysis were then used to design a 1 MWth swirl oxy-coal combustor. Flame temperature analysis and material strength analysis was performed to determine the combustor thickness. The structural integrity of the combustor was validated by finite element analysis using Abacus® and Hypermesh®. Feasibility of igniters and secondary burners are investigated in successful high-pressure oxy-methane combustion. The secondary burners are designed in such a way that it can operate between 100 to 500 kW firing input. Three generations of the pintle injector were designed based on swirl numbers (S=0, 0.9, and 1.2). Key pintle injector parameters such as pintle size, pintle orifice size, spray pattern were investigated by cold flow tests. Information from these tests was used to modify injector design for smooth and successful operation. A 5 mm pintle orifice size was decided upon as the optimum size for oxy-coal operation for the combustor. Shadow sizing experiments were performed to identify the atomization rate of each injector. Different coal water slurry mixtures (30 – 50% coal by wt% in the mixture) at various total momentum ratios (TMR) were investigated for this purpose. These experiments provided decisive information to choose the best design of the injector. The injector with 1.2 swirl provided higher atomization in all cases than other designs. The mean equivalent droplet size of the jet was similar at different TMR and mixture ratios using this injector, thus making it suitable for use in most cases. Therefore, the 1.2 swirl-pintle injector was chosen for the shakedown test. The combustor and other sub-systems, including feed systems and control and data acquisition, have been manufactured, assembled, and integrated. The total system integration and installation began on July 1, 2020. The shake-down tests and initial operational capability demonstration are expected to be completed by September 30, 2020.

01 COAL, LIGNITE, AND PEAT↗

Mechanistic aspects of plasma-enhanced catalytic methane decomposition by time-resolved operando diffuse reflectance infrared Fourier transform spectroscopy

To study mechanistic aspects of plasma-enhanced catalysis, methane is decomposed by a supported Ni catalyst assisted by an Ar/O 2 atmospheric pressure plasma jet (APPJ). Here, the time-resolved surface response of the Ni catalyst is investigated by operando diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) using various experimental settings. Catalyst temperatures of room temperature (RT) and 500 °C and nozzle-catalyst surface distances of 3, 5 and 8 mm were examined, and the amount of O 2 of the Ar/O 2 gas mixture flowing through the APPJ was either 0 or 0.5%. A synergistic effect of surface bonded C-O was observed during the exposure of the Ni catalyst to the APPJ for low oxygen operating conditions (pure Ar jet). Surface bonded C-O formed only when there was plasma present and the C-O signal was enhanced for higher catalyst temperature. When the supported Ni catalyst was subjected to the plasma-generated particle fluxes using highly oxidizing conditions, the presence of surface bonded C-O was suppressed. The plasma-catalytic CO and CO 2 production in the gas phase measured downstream mirrored the surface behavior of C-O bonds when the plasma source operating condition was changed from a low oxygen portion to a high oxygen portion at high catalyst temperature (500 °C). CH n (n =1, 2, ) species on the catalyst surface were also studied by DRIFTS, and CHn destruction was found to correlate with C-O formation. In particular, the time-resolved CH n response showed a possible conversion process of CH n to C-O when the Ni catalyst was exposed to the plasma source. This finding may indicate a plasma-mediated regeneration of the catalyst by plasma-catalyst surface interactions.

42 ENGINEERING↗

Conversion of CO 2 into Commercial Materials Using Carbon Feedstocks

In this project, our research focused on developing reaction chemistry that would support using carbon as a reductant for CO 2 utilization that would permit CO 2 consumption on a scale that would match or exceed anthropomorphic CO 2 generation for energy production from fossil fuels. Armed with the knowledge that reactions attempting to produce compounds with an energy content greater than CO 2 would be thermodynamically challenged and/or require significant amounts of energy, we developed a potential process that utilized a solid carbon source and recycled the carbon to effectively provide infinite time for the carbon to react. During testing of different carbon sources, we found a wide range of reaction rates. Biomass-derived samples had the most reactivity and coals and petcoke had the lowest. Because we had anticipated this challenge, we recognized that a catalyst would be necessary to improve reaction rates and conversion. From the data analysis of carbon samples, we recognized that alkali metals improved the reaction rate. Through parametric testing of catalyst formulations we were able to increase the reaction rate with petcoke by a factor of >70. Our efforts to identify the reaction mechanism to assist in improving the catalyst formulation demonstrated that the catalyst was catalyzing the extraction of oxygen from CO 2 and using this extracted oxygen to oxidize carbon. This was a significant discovery in that if we could modify the catalyst formulation to permit controlled the oxidation, we would have a very power selective oxidation process. With selective oxidation, CO 2 utilization could be effective used as one of the process steps in making many of the large volume commodity chemicals that support our modern lifestyles. The key challenges for incorporating these functionalities into the catalyst formulation were to make the oxidation selective and lower the temperature required for catalytic activity. We identified four catalyst families that had the potential to meet these challenges. Initial screening of the catalyst families did show that the reduction/oxidation activity did occur at lower temperatures and that these catalysts were able to cause carbon chain growth as well as C—C cleavage. A preliminary techno-economic feasibility of using petcoke/catalyst to produce a CO-rich syngas product was completed and showed significant economic promise. Testing of the different catalyst families demonstrated that Catalyst A was able to stably produce 5 sccm of ethylene/gram of catalyst at 900°C for one hour. For dry methane reforming, our Catalyst 4 was able to achieve production rates of > 10 sccm of CO and > 3 sccm of H2 per gram of catalyst at 600°C and 350 psig. Based on these developments, the potential for CO 2 utilization in the production of large volume commodity chemicals is very promising.

10 SYNTHETIC FUELS↗

Duration of O 2 Exposure Determines Dominance of Fe II vs CH 4 Production in Tropical Forest Soils

Temporal fluctuations in redox conditions influence the availability of Fe III and greenhouse gas emissions in humid upland soils. However, the impact of fluctuation duration on biogeochemical processes remains unclear. We hypothesized that rates of Fe III reduction and CH 4 production are sensitive to the duration of soil oxygenation. To test this, surface soil from the Luquillo Forest, Puerto Rico, was subjected to fluctuating redox conditions with an anoxic interval of 6 days followed by oxic intervals of either 8, 24, or 72 h. Shorter oxic intervals enhanced Fe reduction, while longer oxic intervals enhanced CH 4 emissions. As O 2 exposure decreased from 72 to 8 h, Fe reduction rates increased from 0.12 ± 0.02 to 0.26 ± 0.05 mmol kg –1 h –1 , whereas cumulative CH 4 decreased from 44.0 ± 4.7 to 12.7 ± 4.6 μmol kg –1 . 13 C-amino acid spikes were preferentially incorporated into the DNA of iron reducers (Anaeromyxobacter sp.) in the shorter oxic treatment (8 h vs 24 h), suggesting that Fe reducers are less inhibited by shorter periods of oxidation. Conversely, longer oxygen pulses appear to suppress Fe reducers more than methanogens, leading to increased CH 4 emissions. These findings highlight the role of the redox oscillation length in modulating biogeochemical processes and greenhouse gas emissions in soils.

54 ENVIRONMENTAL SCIENCES↗

Life-cycle implications of hydrogen fuel cell electric vehicle technology for medium- and heavy-duty trucks

This study provides a comprehensive and up-to-date life-cycle comparison of hydrogen fuel cell electric trucks (FCETs) and their conventional diesel counterparts in terms of energy use and air emissions, based on the ensemble of well-established methods, high-fidelity vehicle dynamic simulations, and real-world vehicle test data. For the centralized steam methane reforming (SMR) pathway, hydrogen FCETs reduce life-cycle or well-to-wheel (WTW) petroleum energy use by more than 98% compared to their diesel counterparts. The reduction in WTW air emissions for gaseous hydrogen (G.H2) FCETs ranges from 20-45% for greenhouse gases, 37-65% for VOC, 49-77% for CO, 62-83% for NOx, 19-43% for PM10, and 27-44% for PM2.5, depending on vehicle weight classes and truck types. With the current U.S. average electricity generation mix, FCETs tend to create more WTW SOx emissions than their diesel counterparts, mainly because of the upstream emissions related to electricity use for hydrogen compression/liquefaction. Compared to G.H2, liquid hydrogen (L.H2) FCETs generally provide smaller WTW emissions reductions. For both G.H2 and L.H2 pathways for FCETs, because of electricity consumption for compression and liquefaction, spatio-temporal variations of electricity generation can affect the WTW results. FCETs retain the WTW emission reduction benefits, even when considering aggressive diesel engine efficiency improvement.

air emissions↗

Hydrogen quality for fuel cell vehicles - a modeling study of the sensitivity of impurity content in hydrogen to the process variables in the SMR-PSA pathway.

As fuel cell vehicles approach wide-scale deployment, the issue of the quality of hydrogen dispensed to the vehicles has become increasingly important. The various factors that must be considered include the effects of different contaminants on fuel cell performance and durability, the production and purification of hydrogen to meet fuel quality guidelines, and the associated costs of providing hydrogen of that quality to the fuel cell vehicles. In this paper, we describe the development of a model to track the formation and removal of several contaminants over the various steps of hydrogen production by steam-methane reforming (SMR) of natural gas, followed by purification by pressure-swing adsorption (PSA). We have used the model to evaluate the effects of setting varying levels of these contaminants in the product hydrogen on the production/purification efficiency, hydrogen recovery, and the cost of the hydrogen. The model can be used to track contaminants such as CO{sub 2}, CO, N{sub 2}, CH{sub 4}, and H{sub 2}S in the process. The results indicate that a suggested specification of 0.2 ppm CO would limit the maximum hydrogen recovery from the PSA under typical design and operating conditions. The steam-to-carbon ratio and the process pressure are found to have a significant impact on the process efficiency. Varying the CO specification from 0.1 to 1 ppm is not expected to affect the cost of hydrogen significantly, although the cost of gas analysis to comply with such stringent requirements may add 2-10 cents/kg to the cost of hydrogen.

03 NATURAL GAS↗

CH 4 Activation over Perovskite Catalysts: True Density and Reactivity of Active Sites

The high thermal stability of perovskites has drawn attention toward their applications for catalytic CH 4 activation and conversion, typically occurring at high temperatures. The reaction rates of perovskite catalysts for CH 4 combustion, however, trail behind those of noble metal catalysts. Ways to optimize the performance of perovskite catalysts are destined to trial-and-error approaches unless their complex reconstructed surfaces are correlated with fundamental kinetic parameters. Discerning the intrinsic activity of surface catalytic sites and the density of those sites is crucial to rationally envision complex metal oxides with enhanced catalytic performance. Here, the present work presents a detailed kinetic analysis of catalytic CH 4 combustion over a set of seven perovskites (SrTiO 3 , SrZrO 3 , SrFeO 3 , LaFeO 3 , LaInO 3 , LaCoO 3 , LaMnO 3 ) with various surface terminations. Steady-state isotopic transient kinetic analysis was employed to measure turnover frequency (TOF) and density of surface intermediates (N) under operando conditions. Top surface characterization elucidated performance-structure relationships between near-monolayer surface composition and intrinsic reactivity of the catalysts. By using a chemical etching procedure to expose Fe-sites at the top surface of LaFeO 3 (LaFeO 3 , HNO 3 ), its TOF was increased 4-fold, compared with the unmodified sample, although N on the surface of LaFeO 3 , HNO 3 decreased. Density functional theory simulations corroborated that surface Fe-termination and La-Fe termination offer lower energetic barriers for CH 4 activation when compared with La-termination. In general, surface reconstruction is shown as a tool to tune TOF and N to improve reaction rates. This work fills a gap in current kinetic studies of perovskites through a careful assessment and discussion of the density and intrinsic reactivity of active sites for methane combustion over well-characterized reconstructed perovskite surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fundamental Studies of Metal Centered Transformations Relevant to Catalysis

The overall objectives the research performed have been to advance the mission of the U. S. Department of Energy, with specific emphasis concerned with the conversion and use of fossil and renewable energy resources, and the synthesis of advanced chemicals. Achieving this objective requires improvements in rational catalyst design by establishing details of reaction mechanisms and their kinetics. Therefore, over the course of this award, emphasis has been directed towards obtaining detailed information concerned with fundamental transformations that occur at metal centers, with particular attention given towards reactions such as (i) hydrodesulfurization (HDS) and hydrodenitrogenation (HDN), (ii) the use of carbon dioxide as a renewable C1 feedstock, (iii) the generation of hydrogen on demand, and (iv) transformations that involve the cleavage of H–H, C–H and C–C bonds. HDS and HDN are the essential processes for removing sulfur- and nitrogen-containing impurities from crude oil in order to obtain (i) cleaner fuels that minimize environmental pollution and (ii) cleaner chemical feedstocks that are less likely to poison the catalysts that are used for subsequent transformations. The catalysts employed for HDS and HDN are typically molybdenum and tungsten sulfides and, to gain insight into these transformations at the molecular level, we have focused on developing the coordination chemistry of heterocyclic sulfur and nitrogen compounds with molybdenum and tungsten. For example, we obtained the first examples of the cleavage of thiophene C–S bonds by employing molecular molybdenum compounds. The efficient utilization of carbon dioxide as a renewable C 1 source for the synthesis of value added organic chemicals and fuels has prompted much effort towards developing catalytic reactions to functionalize CO 2 . One such approach is hydrosilylation, which can proceed in a stepwise manner to afford a series of products with different levels of reduction, namely silyl formates, silyl acetals, methoxy silanes and methane. Despite the utility of these transformations, however, most catalysts employ precious metals, which operate at elevated temperatures, and control of the level of reduction is challenging. Therefore, it is significant that we have developed zinc and magnesium systems that can achieve hydrosilylation of CO 2 and which may be modified to control the level of reduction. The growing demand for energy requires the development of alternative energy sources that are more sustainable than fossil fuels and have a reduced impact on the environment. In this regard, an attractive energy storage medium is provided by hydrogen, which can, for example, be consumed in a fuel cell with only water as a byproduct. Unfortunately, a problem with using hydrogen in this manner is that present storage and transportation techniques are inadequate. For example, not only does storing liquid hydrogen present a safety risk, considerable energy is also required to liquefy the hydrogen and maintain it in this form. Therefore, we have focused on the application of chemical methods to provide hydrogen on demand. One such method utilizes formic acid as a storage medium and we reported the first examples of molybdenum compounds that serve as catalysts for releasing H 2 from formic acid. The nature of the interaction of a C–H bond with a metal center is of pivotal importance in many transformations of organic molecules, and we have examined several systems to probe how the interaction varies according to whether the metal is molybdenum or tungsten. These studies demonstrate that tungsten exhibits a greater propensity to cleave a C–H bond. While the oxidative addition of C–H bonds to a metal center is well precedented, transformations that feature oxidative addition of C–C bonds are uncommon and so it is noteworthy that we have observed the cleavage of a strong C–C bond that is a component of an unstrained 6-membered aromatic ring. The oxidative addition of dihydrogen to a metal center, and its microscopic reverse, reductive elimination, are two of the simplest yet most important transformations in organometallic chemistry. For example, oxidative addition of dihydrogen is a key step in many transition metal-catalyzed reactions involving H 2 . However, relatively few studies have established in detail the factors that influence the thermodynamics of this transformation. Therefore, it is significant that we demonstrated experimentally that that the energetics of the oxidative addition of H 2 to the six coordinate molybdenum and tungsten halide complexes depends very strongly on the nature of both the metal and the halogen. Deuterium kinetic isotope effects (KIEs) and equilibrium isotope effects (EIEs) serve as versatile tools to infer details about reaction mechanisms. In this regard, primary deuterium isotope effects are often interpreted by using two simple guidelines: (i) the KIE for an elementary reaction is normal (k H /k D > 1) and (ii) the EIE is dictated by deuterium preferring to be located in the site corresponding to the highest frequency oscillator. We have evaluated the applicability of these rules to the interactions of H–H and C–H bonds with a transition metal center and our results question the ability to predict primary EIEs in these systems based on the simple notion that deuterium prefers to occupy the highest frequency oscillator. The key findings are that the EIEs for (i) formation of σ–complexes by coordination of H–H and C–H bonds and (ii) oxidative addition of dihydrogen exhibit unusual temperature dependencies, such that the same system may exhibit both normal (i.e. K H /K D > 1) and inverse (i.e. K H /K D < 1) values.

02 PETROLEUM↗

Hydrogen production from food wastes and gas post-treatment by CO{sub 2} adsorption

Highlights: Black-Right-Pointing-Pointer The dark fermentation process of food wastes was studied over an extended period. Black-Right-Pointing-Pointer Decreasing the HRT of the process negatively affected the specific gas production. Black-Right-Pointing-Pointer Adsorption of CO{sub 2} was successfully attained using a biomass type activated carbon. Black-Right-Pointing-Pointer H{sub 2} concentration in the range of 85-95% was obtained for the treated gas-stream. - Abstract: The production of H{sub 2} by biological means, although still far from being a commercially viable proposition, offers great promise for the future. Purification of the biogas obtained may lead to the production of highly concentrated H{sub 2} streams appropriate for industrial application. This research work evaluates the dark fermentation of food wastes and assesses the possibility of adsorbing CO{sub 2} from the gas stream by means of a low cost biomass-based adsorbent. The reactor used was a completely stirred tank reactor run at different hydraulic retention times (HRTs) while the concentration of solids of the feeding stream was kept constant. The results obtained demonstrate that the H{sub 2} yields from the fermentation of food wastes were affected by modifications in the hydraulic retention time (HRT) due to incomplete hydrolysis. The decrease in the duration of fermentation had a negative effect on the conversion of the substrate into soluble products. This resulted in a lower amount of soluble substrate being available for metabolisation by H{sub 2} producing microflora leading to a reduction in specific H{sub 2} production. Adsorption of CO{sub 2} from a gas stream generated from the dark fermentation process was successfully carried out. The data obtained demonstrate that the column filled with biomass-derived activated carbon resulted in a high degree of hydrogen purification. Co-adsorption of H{sub 2}S onto the activated carbon also took place, there being no evidence of H{sub 2}S present in the bio-H{sub 2} exiting the column. Nevertheless, the concentration of H{sub 2}S was very low, and this co-adsorption did not affect the CO{sub 2} capture capacity of the activated carbon.

08 HYDROGEN↗

Artificial neural network based predictions of cetane number for furanic biofuel additives

The next generation of alternative fuels is being explored through advanced chemical and biological production techniques for the purpose of finding suitable replacements for diesel and gasoline while lowering production costs and increasing process yields. Chemical conversion of biomass to fuels offers a plethora of pathways with a variety of fuel molecules, both novel and traditional, which may be targeted. In the search for new fuels, an initial, intuition-driven evaluation of fuel compounds with desired properties is required. Due to the high cost and significant production time needed to synthesize these materials at a scale sufficient for exhaustive testing, a predictive model would allow chemists to preemptively screen fuel properties of potentially desirable fuel candidates. Current work has shown that predictive models, in this case artificial neural networks (ANN's) analyzing quantitative structure property relationships (QSPR's), can predict the cetane number (CN) of a proposed fuel molecule with relatively small error. A fuel's CN is a measure of its ignition quality, typically defined using prescribed ASTM standards and a cetane testing engine. Alternatively, the analogous derived cetane number (DCN), obtained using an Ignition Quality Tester (IQT), is a direct measurement alternative to the CN that uses an empirical inverse relationship to the ignition delay found in the constant volume combustion chamber apparatus. DCN data points acquired using an IQT were utilized for model validation and expansion of the experimental database used in this study. The present report improves on an existing model by optimizing the model architecture along with the key learning variables of the ANN and by making the model more generalizable to a wider variety of fuel candidate types, specifically the class of furans and furan derivatives, by including specific molecules for the model to incorporate. The new molecules considered include tetrahydrofuran, 2-methylfuran, 2-methyltetrahydrofuran, 5,5'-(furan-2-ylmethylene)bis(2-methylfuran), 5,5'-((tetrahydrofuran-2-yl)methylene)bis(2-methyltetrahydrofuran), tris(5-methylfuran-2-yl)methane, and tris(5-methyltetrahydrofuran-2-yl)methane. Model architecture adjustments improved the overall root-mean-square error (RMSE) of the base database predictions by 5.54%. Additionally, through the targeted database expansion, it is shown that the predicted cetane number of the furan-based molecules improves on average by 49.21% (3.74 CN units) and significantly for a few of the individual molecules. This indicates that a selected subset of representative molecules can be used to extend the model's predictive accuracy to new molecular classes. The approach, bolstered by the improvements presented in this paper, enables chemists to focus on promising molecules by eliminating less favorable candidates in relation to their ignition quality.

09 BIOMASS FUELS↗