Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “highly deviated”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51
All sourcesNASA NTRSDOE OSTI
NASA NTRS1998

Combined Numerical/Analytical Perturbation Solutions of the Navier-Stokes Equations for Aerodynamic Ejector/Mixer Nozzle Flows

In spite of rapid advances in both scalar and parallel computational tools, the large number of variables involved in both design and inverse problems make the use of sophisticated fluid flow models impractical, With this restriction, it is concluded that an important family of methods for mathematical/computational development are reduced or approximate fluid flow models. In this study a combined perturbation/numerical modeling methodology is developed which provides a rigorously derived family of solutions. The mathematical model is computationally more efficient than classical boundary layer but provides important two-dimensional information not available using quasi-1-d approaches. An additional strength of the current methodology is its ability to locally predict static pressure fields in a manner analogous to more sophisticated parabolized Navier Stokes (PNS) formulations. To resolve singular behavior, the model utilizes classical analytical solution techniques. Hence, analytical methods have been combined with efficient numerical methods to yield an efficient hybrid fluid flow model. In particular, the main objective of this research has been to develop a system of analytical and numerical ejector/mixer nozzle models, which require minimal empirical input. A computer code, DREA Differential Reduced Ejector/mixer Analysis has been developed with the ability to run sufficiently fast so that it may be used either as a subroutine or called by an design optimization routine. Models are of direct use to the High Speed Civil Transport Program (a joint government/industry project seeking to develop an economically.viable U.S. commercial supersonic transport vehicle) and are currently being adopted by both NASA and industry. Experimental validation of these models is provided by comparison to results obtained from open literature and Limited Exclusive Right Distribution (LERD) sources, as well as dedicated experiments performed at Texas A&M. These experiments have been performed using a hydraulic/gas flow analog. Results of comparisons of DREA computations with experimental data, which include entrainment, thrust, and local profile information, are overall good. Computational time studies indicate that DREA provides considerably more information at a lower computational cost than contemporary ejector nozzle design models. Finally. physical limitations of the method, deviations from experimental data, potential improvements and alternative formulations are described. This report represents closure to the NASA Graduate Researchers Program. Versions of the DREA code and a user's guide may be obtained from the NASA Lewis Research Center.

DeChant, Lawrence Justin↗
NASA NTRS2016

Aerosol Optical Properties at the Lulin Atmospheric Background Station in Taiwan and the Influences of Long-Range Transport of Air Pollutants

The Lulin Atmospheric Background Station (LABS, 23.47 deg. N 120.87 deg. E, 2862 m ASL) in Central Taiwan was constructed in 2006 and is the only high-altitude background station in the western Pacific region for studying the influence of continental outflow. In this study, extensive optical properties of aerosols, including the aerosol light scattering coefficient [Sigma(sub s)] and light absorption coefficient [Sigma(sub a)], were collected from 2013 to 2014. The intensive optical properties, including mass scattering efficiency [Sigma(sub s)], mass absorption efficiency [Sigma(sub a)] single scattering albedo (Omega), scattering Angstrom exponent (A), and backscattering fraction (b), were determined and investigated, and the distinct seasonal cycle was observed. The value of [Alpha(sub a)] began to increase in January and reached a maximum in April; the mean in spring was 5.89 m(exp. 2) g(exp. -1) with a standard deviation (SD) of 4.54 m(exp. 2) g(exp. -1) and a 4.48 m(exp. 2) g(exp. -1) interquartile range (IQR: 2.95-7.43 m(exp. 2) g(exp. -1). The trend was similar in [Sigma(sub a)], with a maximum in March and a monthly mean of 0.84 m(exp. 2) g(exp. -1). The peak values of Omega (Mean = 0.92, SD = 0.03, IQR: 0.90 - 0.93) and A (Mean = 2.22, SD = 0.61, IQR: 2.12 = 2.47) occurred in autumn. These annual patterns of optical properties were associated with different long-range transport patterns of air pollutants such as biomass burning (BB) aerosol in spring and potential anthropogenic emissions in autumn. The optical measurements performed at LABS during spring in 2013 were compared with those simultaneously performed at the Doi Ang Kang Meteorology Station, Chiang Mai Province, Thailand (DAK, 19.93 deg. N, 99.05 deg. E, 1536 m a.s.l.), which is located in the Southeast Asia BB source region. Furthermore, the relationships among [Sigma(sub s)], [Sigma(sub a)], and (b) were used to characterize the potential aerosol types transported to LABS during different seasons, and the data were inspected according to the HYSPLIT 5-day backward trajectories, which differentiate between different regions of air mass origin.

aerosol optical properties↗
NASA NTRS2021

Analysis of the long-term drift rates and oscillations of Jupiter’s largest vortices

Jupiter’s troposphere is dynamically characterized by a series of alternating eastward and westward jets. Embedded between these alternating jets, large vortices, characterized by their high speed closed circulations can be found in several latitudinal bands. The Great Red Spot (GRS) and the White Ovals (WOS) located at ≈22 and ≈30 degrees south respectively1 are the largest of these vortices. The GRS has undergone significant changes in size, coloration and maximum circumferential wind speed over the last two decades. The three WOS also experienced changes in size, and they merged over time until there was only one remaining, which since then has been formally known as oval BA. Here we used over four decades worth of data from the Database for Object Positions on Jupiter (JUPOS), to investigate the long-term mean longitudinal drift of these largest vortices, and to characterize the deviations from this mean drift. A linear fit to the GRS drift speed for the last two decades gives a rate of change of (3.1 ± 0.4)^(-3°)/day/year. For oval BA we find that its annual drift rate changed from -0.39°/day in 2016 to -0.58°/day in 2020 following a steep trend that is best fitted by a second order polynomial. Regarding oscillations, we find that for the last two decades the GRS has continued to oscillate longitudinally with the same period (90 days) and peak-to-peak amplitude (1.2 degrees longitude) as reported historically. For the WOS, the data prior to 2000 seems to indicate that they presented similar oscillations with periods of ≈158 days and peak-to-peak amplitudes of ≈1.6 degrees. The analysis of the data for oval BA since the year 2000 reveals evidence of an oscillation with a period of ≈138 days and peak-to-peak amplitude of ≈1.6 degrees longitude.

Raúl Morales-Juberías↗
NASA NTRS1992

Computations of unsteady multistage compressor flows in a workstation environment

High-end graphics workstations are becoming a necessary tool in the computational fluid dynamics environment. In addition to their graphic capabilities, workstations of the latest generation have powerful floating-point-operation capabilities. As workstations become common, they could provide valuable computing time for such applications as turbomachinery flow calculations. This report discusses the issues involved in implementing an unsteady, viscous multistage-turbomachinery code (STAGE-2) on workstations. It then describes work in which the workstation version of STAGE-2 was used to study the effects of axial-gap spacing on the time-averaged and unsteady flow within a 2 1/2-stage compressor. The results included time-averaged surface pressures, time-averaged pressure contours, standard deviation of pressure contours, pressure amplitudes, and force polar plots.

Gundy-Burlet, Karen L.↗
NASA NTRS1994

Actively controlled shaft seals for aerospace applications

This study experimentally investigates an actively controlled mechanical seal for aerospace applications. The seal of interest is a gas seal, which is considerably more compact than previous actively controlled mechanical seals that were developed for industrial use. In a mechanical seal, the radial convergence of the seal interface has a primary effect on the film thickness. Active control of the film thickness is established by controlling the radial convergence of the seal interface with piezoelectric actuator. An actively controlled mechanical seal was initially designed and evaluated using a mathematical model. Based on these results, a seal was fabricated and tested under laboratory conditions. The seal was tested with both helium and air, at rotational speeds up to 3770 rad/sec, and at sealed pressures as high as 1.48 x 10(exp 6) Pa. The seal was operated with both manual control and with a closed-loop control system that used either the leakage rate or face temperature as the feedback. The output of the controller was the voltage applied to the piezoelectric actuator. The seal operated successfully for both short term tests (less than one hour) and for longer term tests (four hours) with a closed-loop control system. The leakage rates were typically 5-15 slm (standard liters per minute), and the face temperatures were generally maintained below 100 C. When leakage rate was used as the feedback signal, the setpoint leakage rate was typically maintained within 1 slm. However, larger deviations occurred during sudden changes in sealed pressure. When face temperature was used as the feedback signal, the setpoint face temperature was generally maintained within 3 C, with larger deviations occurring when the sealed pressure changed suddenly.

Salant, Richard F.↗
NASA NTRS2003

High-Time-Resolution Study of Magnetic Holes in the Solar Wind

The objectives of this investigation are to determine the internal plasma structure of kinetic-scale and larger scale magnetic holes, and to determine their stability, their source mechanism(s), and their spatial extent. It is also of importance to determine the relationship between kinetic-scale holes and long-duration holes. As smaller and smaller magnetic depressions are investigated in order to make this a complete study, a robust criterion is necessary for distinguishing magnetic holes from random or unresolvable fluctuations in the interplanetary magnetic field. In order to resolve this ambiguity, we obtained from the MFI experiments magnetic field measurements from the WIND spacecraft at a time resolution of 46 to 184 ms over certain periods. We have also devised a measure of certainty for magnetic hole detections. The certainty factor, q, is defined as the difference between the mean magnetic field in the hole and the local magnetic field, in units of the local standard deviation of the field strength. For fullest generality, it is necessary to calculate this q over the range of available scales of interest, from 60 ms up to 300 s. This technique establishes a two dimensional matrix of relative probabilities that a hole of some duration (d) might exist in the data set at a given time (t). In identifying q-peaks in time and duration, we also come upon a natural method for distinguishing holes with internal structure from multiple holes in close proximity or holes nested inside of others. If two q-peaks are more than a half-width apart, they are simply said to be separate events.

Lazarus, Alan↗
NASA NTRS2011

Evaluation and Windspeed Dependence of MODIS Aerosol Retrievals Over Open Ocean

The Maritime Aerosol Network (MAN) data set provides high quality ground-truth to validate the MODIS aerosol product over open ocean. Prior validation of the ocean aerosol product has been limited to coastal and island sites. Comparing MODIS Collection 5 ocean aerosol retrieval products with collocated MAN measurements from ships shows that MODIS is meeting the pre-launch uncertainty estimates for aerosol optical depth (AOD) with 64% and 67% of retrievals at 550 nm, and 74% and 78% of retrievals at 870 nm, falling within expected uncertainty for Terra and Aqua, respectively. Angstrom Exponent comparisons show a high correlation between MODIS retrievals and shipboard measurements (R= 0.85 Terra, 0.83 Aqua), although the MODIS aerosol algorithm tends to underestimate particle size for large particles and overestimate size for small particles, as seen in earlier Collections. Prior analysis noted an offset between Terra and Aqua ocean AOD, without concluding which sensor was more accurate. The simple linear regression reported here, is consistent with other anecdotal evidence that Aqua agreement with AERONET is marginally better. However we cannot claim based on the current study that the better Aqua comparison is statistically significant. Systematic increase of error as a function of wind speed is noted in both Terra and Aqua retrievals. This wind speed dependency enters the retrieval when winds deviate from the 6 m/s value assumed in the rough ocean surface and white cap parameterizations. Wind speed dependency in the results can be mitigated by using auxiliary NCEP wind speed information in the retrieval process.

Kleidman, Richard G.↗
NASA NTRS2012

Interval Management with Spacing to Parallel Dependent Runways (IMSPIDR) Experiment and Results

An area in aviation operations that may offer an increase in efficiency is the use of continuous descent arrivals (CDA), especially during dependent parallel runway operations. However, variations in aircraft descent angle and speed can cause inaccuracies in estimated time of arrival calculations, requiring an increase in the size of the buffer between aircraft. This in turn reduces airport throughput and limits the use of CDAs during high-density operations, particularly to dependent parallel runways. The Interval Management with Spacing to Parallel Dependent Runways (IMSPiDR) concept uses a trajectory-based spacing tool onboard the aircraft to achieve by the runway an air traffic control assigned spacing interval behind the previous aircraft. This paper describes the first ever experiment and results of this concept at NASA Langley. Pilots flew CDAs to the Dallas Fort-Worth airport using airspeed calculations from the spacing tool to achieve either a Required Time of Arrival (RTA) or Interval Management (IM) spacing interval at the runway threshold. Results indicate flight crews were able to land aircraft on the runway with a mean of 2 seconds and less than 4 seconds standard deviation of the air traffic control assigned time, even in the presence of forecast wind error and large time delay. Statistically significant differences in delivery precision and number of speed changes as a function of stream position were observed, however, there was no trend to the difference and the error did not increase during the operation. Two areas the flight crew indicated as not acceptable included the additional number of speed changes required during the wind shear event, and issuing an IM clearance via data link while at low altitude. A number of refinements and future spacing algorithm capabilities were also identified.

Baxley, Brian T.↗
NASA NTRS2016

Photospheric Current Spikes and Their Possible Association with Flares - Results from an HMI Data Driven Model

A data driven, near photospheric magnetohydrodynamic model predicts spikes in the horizontal current density, and associated resistive heating rate per unit volume Q. The spikes appear as increases by orders of magnitude above background values in neutral line regions (NLRs) of active regions (ARs). The largest spikes typically occur a few hours to a few days prior to M or X flares. The spikes correspond to large vertical derivatives of the horizontal magnetic field. The model takes as input the photospheric magnetic field observed by the Helioseismic & Magnetic Imager (HMI) on the Solar Dynamics Observatory (SDO) satellite. This 2.5 D field is used to determine an analytic expression for a 3 D magnetic field, from which the current density, vector potential, and electric field are computed in every AR pixel for 14 ARs. The field is not assumed to be force-free. The spurious 6, 12, and 24 hour Doppler periods due to SDO orbital motion are filtered out of the time series of the HMI magnetic field for each pixel using a band pass filter. The subset of spikes analyzed at the pixel level are found to occur on HMI and granulation scales of 1 arcsec and 12 minutes. Spikes are found in ARs with and without M or X flares, and outside as well as inside NLRs, but the largest spikes are localized in the NLRs of ARs with M or X flares. The energy to drive the heating associated with the largest current spikes comes from bulk flow kinetic energy, not the electromagnetic field, and the current density is highly non-force free. The results suggest that, in combination with the model, HMI is revealing strong, convection driven, non-force free heating events on granulation scales, and that it is plausible these events are correlated with subsequent M or X flares. More and longer time series need to be analyzed to determine if such a correlation exists. Above an AR dependent threshold value of Q, the number of events N(Q) with heating rates greater than or equal to Q obeys a scale invariant power law distribution for each AR given by N(Q) varies Q(sup -s), where 0.40 less than or equal to S less than or equal to 0.53, with a mean and standard deviation across the 14 ARs of 0.47 and 0.045, showing there is little variation of S from one AR to another. These properties of N(Q) are in close agreement with those of the distribution N(E) for the total energy E of solar flares, determined from observations to be N(E) = constant x E(sup -alpha). From observations of nanoflares in the 0.7 to 4 MK range, and from observations of flares in hard X-rays, it is found that 0.51 less than or equal to alpha less than or equal to 0.57, and 0.4 less than or equal to alpha less than or equal to 0.6, respectively (Crosby et al. 1993, Sol. Phys., 143, 275; Aschwanden & Parnell 2002, ApJ, 572, 1048). Observations also show that, as is found here for the exponent S, there is little variation of alpha with AR (Wheatland 2000, ApJ, 532, 1209), indicating N(E) and N(Q) are largely independent of individual properties of ARs such as area, total magnetic flux, and distribution of current density (i.e. non-potentiality). Therefore the power law scaling of the photospheric heating rate Q computed here on granulation scales is essentially identical to that found for coronal observations of flare energies on scales 1-2 orders of magnitude larger. This suggests the physical mechanisms that cause Q and coronal flares are closely related. It seems likely that Q is the signature of a magnetic reconnection process in an energy range and volume orders of magnitude smaller than those of flares. In this context, at least the larger spikes in Q might be signatures of UV photospheric or lower chromospheric bombs in which plasma is heated to temperatures approximately 10(exp -5) K (Peter et al. 2014, Science 346, 1255726; Judge 2015, ApJ, 808, 116). In addition, lattice based avalanche simulations of flare energy release predict 0.4 less than or equal to alpha less than or equal to 0.5, while analytic, fractal-diffusive self-organized criticality models predict 0.4 less than or equal to alpha less than or equal to 0.67, in excellent agreement with observations, and the results presented here (Aschwanden & Parnell 2002, ApJ, 572, 1048; Aschwanden 2012, A&A, 539, A2; Aschwanden 2013, in "Self Organized Criticality Systems"; Aschwanden et al. 2016, SSR, 198, 47).

Goodman, Michael↗
NASA NTRS2023

Leveraging Automated Fiber Placement Computer Aided Process Planning Framework for Defect Validation and Dynamic Layup Strategies

Process planning represents an essential stage of the Automated Fiber Placement (AFP) workflow. It develops useful and efficient machine processes based upon the working material, composite design, and manufacturing resources. The current state of process planning requires a high degree of interaction from the process planner and could greatly benefit from increased automation. Therefore, a list of key steps and functions are created to identify the more difficult and time-consuming phases of process planning. Additionally, a set of metrics must exist by which to evaluate the effectiveness of the manufactured laminate from the machine code created during the Process Planning stage. Layup strategies, in addition to dog ears, stagger shifts, steering constraints, and starting points, represented the group of functions labeled as process optimization and ranked the highest in terms of priority for automation. The laminates resulting from the selected parameters are evaluated through the occurrences of principal defect metrics such as fiber gaps, overlaps, angle deviation and steering violations. This document presents an automated software solution to the layup strategy and starting point selection phase of process planning. A series of ply scenarios are generated with variations of these ply parameters and evaluated according to a set of metrics entered by the Process Planner. These metrics are generated through use of the Analytical Hierarchy Process (AHP), where relative importance between each of the fiber features are defined. The ply scenarios are selected which reduce the overall fiber feature scores based on the defects the Process Planner wishes to minimize.

HiCAM↗
NASA NTRS1980

Radar estimation of slant path rain attenuation at frequencies above 10 GHz and comparisons with measured multi-season results

Techniques and results pertaining to estimating Earth satellite path rain attenuation events and statistics using radar at nonattenuating wavelengths are presented. The radar formulation and beam scanning methods are described and the procedure for relating the radar measured Rayleigh reflectivity to the high frequency Mie attenuation coefficient are given. Examples of radar derived single terminal statistics and estimation criteria as they relate to path angle and frequency are reviewed. Radar derived space diversity statistics and their dependence on terminal spacing and frequency are described. Site diversity performance curves obtained by radar and radiometry are compared with each other demonstrating the utility of radar methods. Results of a multi-year experiment to test, refine, and establish accuracies of radar methods for arriving at estimates of rain attenuation along an Earth-satellite path are discussed. Comparisons of measured and radar estimated fade events are presented and found to be good. Comparisons of cumulative fade distributions show agreement to be excellent giving an rms deviation of 1 dB.

Goldhirsh, J.↗
NASA NTRS1984

Aspheric concave grating spectrographs

The design of aspheric concave gratings for high-resolution spectroscopes is examined theoretically, using the requirements of the proposed Far-UV Spectroscopic Explorer (effective area 100 sq cm and lambda/delta lambda = 30,000 in the 90-120-nm range) as a concrete example and taking the limitations of current fabrication technology (straight grooves only and maximum density 6000 lines/mm) into account. The total-path function derived by Namioka (1961) for an ellipsoidal grating is subjected to aberration analysis to obtain the optical surface best suited to the design requirements; expressions for corrections to the conventional stigmatic Rowland-circle mount are obtained and shown to produce significant performance improvements; and the design advantages of coma-corrected non-Rowland geometries are explored. Ray tracings and deviation contours are provided.

Cash, W. C., Jr.↗
NASA NTRS1999

The Design of a Fault-Tolerant COTS-Based Bus Architecture

In this paper, we report our experiences and findings on the design of a fault-tolerant bus architecture comprised of two COTS buses, the IEEE 1394 and the 12C. This fault-tolerant bus is the backbone system bus for the avionics architecture of the X2000 program at the Jet Propulsion Laboratory. COTS buses are attractive because of the availability of low cost commercial products. However, they are not specifically designed for highly reliable applications such as long-life deep-space missions. The X2000 design team has devised a multi-level fault tolerance approach to compensate for this shortcoming of COTS buses. First, the approach enhances the fault tolerance capabilities of the IEEE 1394 and 12 C buses by adding a layer of fault handling hardware and software. Second, algorithms are developed to enable the IEEE 1394 and the 12 C buses assist each other to isolate and recovery from faults. Third, the set of IEEE 1394 and 12 C buses is duplicated to further enhance system reliability. The X2000 design team has paid special attention to guarantee that all fault tolerance provisions will not cause the bus design to deviate from the commercial standard specifications. Otherwise, the economic attractiveness of using COTS will be diminished. The hardware and software design of the X2000 fault-tolerant bus are being implemented and flight hardware will be delivered to the ST4 and Europa Orbiter missions.

Chau, Savio N.↗
NASA NTRS2019

Closure Relations of Gamma-Ray Bursts in High Energy Emission

The synchrotron external shock model predicts the evolution of the spectral (β) and temporal (α) indices during the gamma-ray burst (GRB) afterglow for different environmental density profiles, electron spectral indices, electron cooling regimes, and regions of the spectrum. We study the relationship between α and β, the so-called “closure relations” with GRBs detected by Fermi Large Area Telescope (Fermi-LAT) from 2008 August to 2018 August. The spectral and temporal indices for the >100 MeV emission from the Fermi-LAT as determined in the Second Fermi-LAT Gamma-Ray Burst Catalog (2FLGC) are used in this work. We select GRBs whose spectral and temporal indices are well constrained (58 long-duration GRBs and 1 short-duration GRBs) and classify each GRB into the best-matched relation. As a result, we found that a number of GRBs require a very small fraction of the total energy density contained in the magnetic field (òB <~10−7). The estimated mean and standard deviation of electron spectral index p are 2.40 and 0.44, respectively. The GRBs satisfying a closure relation of the slow cooling tend to have a softer p value compared to those of the fast cooling. Moreover, the Kolmogorov–Smirnov test of the two p distributions from the fast and slow coolings rejects a hypothesis that the two distributions are drawn from the single reference distribution with a significance of 3.2σ. Lastly, the uniform density medium is preferred over the medium that decreases like the inverse of distance squared for long-duration GRBs.

Gamma-ray bursts↗
NASA NTRS1994

The downward flux of O(+) over the nightside of Venus

We have constructed a map of the downward flux of O(+) over the nightside of Venus at high and low solar activities through a combination of modeling and analysis of Pioneer Venus ion mass spectrometer data. O(+) density profiles were obtained for almost 40 inbound or outbound segments of orbits from the first 2 years of the mission and about 40 more in the recent reentry phase of the mission. We have determined the nearly linear relationship between the 0(+) maximum density and the downward O(+) flux for several solar zenith angles and local times by constructing models of the nightside ionosphere of Venus for a range of downward ion fluxes at the upper boundaries. We find that the largest downward fluxes occur near the terminators, and the fluxes fall off sharply toward the antisolar point. Although the standard deviations in the data are large, there is a suggestion of a local maximum near 155 deg, and the location of this maximum correlates fairly well with structure in the peak electron density as a function of solar zenith angle reported for the Pioneer Venus radio occulation experiment. The average downward ion flux is inferred to be about 1.7 x 10(exp 8)/sq cm/sec over the nightside hemisphere at solar maximum and a factor of 7 less at moderately low solar activity.

Brannon, J. J.↗
NASA NTRS2014

Adaptive Controller Effects on Pilot Behavior

Adaptive control provides robustness and resilience for highly uncertain, and potentially unpredictable, flight dynamics characteristic. Some of the recent flight experiences of pilot-in-the-loop with an adaptive controller have exhibited unpredicted interactions. In retrospect, this is not surprising once it is realized that there are now two adaptive controllers interacting, the software adaptive control system and the pilot. An experiment was conducted to categorize these interactions on the pilot with an adaptive controller during control surface failures. One of the objectives of this experiment was to determine how the adaptation time of the controller affects pilots. The pitch and roll errors, and stick input increased for increasing adaptation time and during the segment when the adaptive controller was adapting. Not surprisingly, altitude, cross track and angle deviations, and vertical velocity also increase during the failure and then slowly return to pre-failure levels. Subjects may change their behavior even as an adaptive controller is adapting with additional stick inputs. Therefore, the adaptive controller should adapt as fast as possible to minimize flight track errors. This will minimize undesirable interactions between the pilot and the adaptive controller and maintain maneuvering precision.

Trujillo, Anna C.↗
NASA NTRSDate not supplied

The PolCube CubeSat Polarimeter for Earth Science

PolCube is a 12U CubeSat + polarimeter instrument designed by NASA Langley and the Korea Astronomy and Space Science Institute (KASI) for Earth Science. PolCube is based on the PolCam polarimeter onboard the Korean Pathfinder Lunar Observatory (KPLO) that launched in August 2022. The objective of the PolCube instrument is to retrieve detailed fine-mode (pollution and smoke) and coarse-mode (sea-salt and dust) aerosol properties over the ocean for a range of light to heavy aerosol loadings using its polarimetric-imaging capability at multiple angles and wavelengths from 410 − 865 nm. An additional objective is to discriminate aerosols from thin clouds. We quantify the performance of aerosol and ocean remote sensing products from the PolCube polarimeter instrument using the Microphysical Aerosol Properties from Polarimetry (MAPP) remote sensing retrieval algorithm. PolCube’s accurate and high-resolution aerosol-retrieval products will provide unique spatial and temporal coverage of the Earth that can be used synergistically with other instruments, such as the PACE (Plankton, Aerosols, Clouds and Ecosystems) and GEMS (Geostationary Environmental Monitoring Spectrometer) mission to improve air-quality forecasting. We present the PolCube-MAPP retrieval algorithm, which used optimal estimation and artificial intelligence, as well as multiple powerful inherent optical property look-up-tables for the Earth’s aerosol, cloud, and hydrosol particles. We estimate that PolCube can retrieve total aerosol optical depth at 555 nm (AOD555) within ±0.068, fine-mode AOD555 within ±0.078, and fine-mode single-scattering albedo within ±0.036, where all uncertainties are expressed as one standard deviation (1σ).

Snorre Stamnes↗
NASA NTRS1976

Empirical models of high latitude electric fields

Model cross sections of the high latitude dawn-dusk electric field based on OGO-6 data are presented for the signature profiles, most frequently encountered for both + and -Y orientations of the interplanetary magnetic field. Line integrals give a total potential of 76 keV in each case. To illustrate extremes, examples of model cross-sections with total potentials of 23 keV and 140 keV are also given. Model convection patterns are also presented utilizing OGO-6 data on boundary locations at other magnetic local times. When this information is combined with characteristic field geometries in the region of the Harang discontinuity, and is supplemented by data from Ba+ cloud motions in the polar cap, it becomes possible to construct realistic convection patterns on the nightside which deviate from the usual sun-aligned patterns. The observational models presented are of limited applicability as a consequence of the variability of observed distributions. These limitations are emphasized with particular attention given to several types of recurrent deviations which have not previously been discussed.

Heppner, J. P.↗