Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “grade”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Electrocatalytic Hydrogenation of Biomass-Derived Organics: A review

Sustainable energy generation calls for a shift away from centralized, high-temperature, energy-intensive processes to decentralized, low-temperature conversions that can be powered by electricity produced from renewable sources. Electrocatalytic conversion of biomass-derived feedstocks would allow carbon recycling of distributed, energy-poor resources in the absence of sinks and sources of high-grade heat. Selective, efficient electrocatalysts that operate at low temperatures are needed for electrocatalytic hydrogenation (ECH) to upgrade the feedstocks. For effective generation of energy-dense chemicals and fuels, two design criteria must be met: (i) a high H:C ratio via ECH to allow for high-quality fuels and blends, and (ii) a lower O:C ratio in the target molecules via electrochemical decarboxylation/deoxygenation to improve the stability of fuels and chemicals. The goal of this review is to determine whether the following questions have been sufficiently answered in open literature, and if not, what additional information is required: (1) What organic functionalities are accessible for electrocatalytic hydrogenation under a set of reaction conditions? How do substitutions and functionalities impact the activity and selectivity of ECH? (2) What material properties cause an electrocatalyst to be active for ECH? Can general trends in ECH be formulated based on the type of electrocatalyst? (3) What is the impact of reaction (electrolyte concentration, pH, operating potential) and reactor type conditions?

Catalysts, redox reactions, hydrocarbons, Aromatic↗
DOE OSTI2020

Stability, Combustion, and Compatibility of High-Viscosity Heavy Fuel Oil Blends with a Fast Pyrolysis Bio-Oil

Properties related to the combustion, stability, and compatibility of blends composed of high-viscosity heavy fuel oil (HFO) and highly acidic pyrolysis bio-oil were determined to assess the utility of bio-oil as a marine fuel. The addition of bio-oil was shown to be fully stable with HFO at blend levels up to 50 mass % for up to 2 weeks. Bio-oil concentrations as low as 5 mass % significantly reduced the viscosity of HFO at 25 and 50 °C. Aging studies at 50 and 90 °C showed that the HFO inhibited the polymerization of bio-oil. The heating value and lubricity showed a linear dependency with bio-oil content, and combustion quality was acceptable for blends containing up to 15% bio-oil. The highly acidic bio-oil was found to be corrosive to carbon steel, 2.25Cr-1Mo steel, and 409 stainless steels, but not 304L and 316L. When blended into HFO at levels less than 19 mass %, no measurable corrosion was observed on any of the steel materials, but a 50 mass % concentration produced low-to-moderate corrosion in the carbon steel, 2.25Cr-1Mo steel, and 409 stainless steel grades. The combination of good blend stability, polymerization inhibition, reduced viscosity, and acceptable compatibility for low blend levels suggests that bio-oils may be suitable for use as a marine fuel.

09 BIOMASS FUELS↗
DOE OSTI2023

Elucidation of Structure and Physical Properties of Pyrolytic Sugar Oligomers Derived from Cellulose Depolymerization/Dehydration Reactions: A Density Functional Theory Study

Fast pyrolysis of lignocellulosic materials is a promising research area to produce renewable fuels and chemicals. Dehydration is known to be among the most important reaction families during cellulose pyrolysis; water is the most important product. Together with water, dehydration reactions also form a range of poorly known oligomer species of varying molecular sizes, often collected as part of bio-oil water-soluble (WS) fraction. In this work, we used electronic structure calculations to evaluate the relative thermodynamic stabilities of several oligomer species resulting from up to three consecutive dehydration events from cellulose depolymerization intermediates. A library of the thermodynamically favored candidate molecular structures was compiled. Results revealed that most of the water molecules are eliminated from the non-reducing end, forming thermodynamically more stable conjugated compounds. This is consistent with results reported by other researchers in literature where dehydration reactions occur preferably at the non-reducing ends of oligomers. The physical-chemical properties of the proposed structures were estimated using quantitative structure-property relationships (QSPRs) and quantitative property-property relationships (QPPRs). The anhydro-sugars derived from cellulose are often blamed for coke formation during bio-oil hydrotreatment. Understanding their chemical structure could help to develop rational strategies to mitigate coke formation. Furthermore, the thermo-physical properties reported (boiling point, melting point, Gibb’s free energy of formation, enthalpy of formation, and solubility parameters among others) are also fundamental to conducting first principle engineering calculations to design and analyze new pyrolysis reactors and bio-oil up-grading units.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Thermal Barrier Coatings Overview: Design, Manufacturing, and Applications in High-Temperature Industries

Today’s competitive world economy is creating an indispensable demand for increased efficiency of engineering components that operate in harsh environments (i.e., very high-temperature, corrosive, or neutron irradiation environments), for applications in the energy, automotive, aerospace, electronics, and power industries. Increased research is being done on thermal barrier coatings (TBCs) for protecting such components, since the versatility of manufacturing techniques and the scale of deployment result in increased life, economics, performance, and durability. This review focuses on the advances that led to using TBCs for component life extension and, more recently, as an integral part of advanced component design for high-temperature and other types of harsh environments, such as those found in nuclear-related applications. Furthermore, factors that led to state-of-the-art advanced coating-fabrication techniques [e.g., electron-beam physical vapor deposition (EB-PVD), plasma spray deposition, and electrophoretically deposited TBCs, as well as functionally graded material (FGM) manufacturing] have also been emphasized in current coating R&D. This review explores the current state of TBCs, i.e., the latest advances regarding their fabrication and performance, associated challenges, and recommendations for their future use in aerospace, nuclear, high-temperature, or otherwise harsh environments.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Optimization Modeling for Advanced Syngas to Olefin Reactive Systems

Reactor designs with mixed catalysts play an important role in transforming a multiple reactor system to single-shot reactors. In addition to savings in capital and ease of implementation, single-shot reactors are useful to break equilibrium limitations, thereby increasing the yield and selectivity of desired product as shown in previous studies. However, the nonlinear and highly exothermic nature of mixed-catalyst systems makes it difficult for commercial process simulation and optimization tools to optimize these systems. This study describes the development and application of optimization strategies for mixed-catalyst, single-shot reactors for syngas to olefin (STO) processes. Finding the optimal catalyst distribution is challenging and requires advanced solution strategies for singular optimal control problems, which are poorly conditioned and often lead to flat response surfaces. The graded bed and partial-moving finite-element approaches are used to find the optimal catalyst distribution that maximizes the olefins yield. A 1.3% increase in the yield is observed from one zone to three zones. The yield further improves from three zones to the exact infinite dimensional solution by 0.2%. This improvement can be realized in practice by changing only the catalyst distribution, without any extra investment. Lastly, the results suggest that a mixed-catalyst single shot reactor bed can be applied to other reaction mechanisms to increase reactor performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Efficient Treatment of Large Active Spaces through Multi-GPU Parallel Implementation of Direct Configuration Interaction

In this study, we have extended our graphical processing unit (GPU)-accelerated direct configuration interaction program to multiple devices, reducing iteration times for configuration spaces of 165 million determinants to only 3 s using NVIDIA P100 GPUs. Similar improvements in the one- and two-particle reduced density matrix formation allow for fast analytical energy gradients and electronic properties. Our parallel algorithm enables the calculation of arbitrarily large configuration spaces (limited only by available system memory), with iteration times of 13 min for an active space of 18 electrons in 18 orbitals (2.4 billion determinants) using six consumer grade NVIDIA 1080Ti GPUs. These advances enable routine molecular dynamics simulations, geometry optimizations, and absorption spectrum calculations for molecules with large configuration spaces, a task that has heretofore required massive computational effort. In this work, we demonstrate the utility of our program by generating the absorption spectrum for diphenyl acetylene at the floating occupation molecular orbital complete active space configuration interaction level of theory. Lastly, several active spaces were investigated to assess the dependence of spectral features on orbital space dimension.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Discovery of Macrocyclic Myeloid Cell Leukemia 1 (Mcl-1)Inhibitors that Demonstrate Potent Cellular Efficacy and In Vivo Activity in a Mouse Solid Tumor Xenograft Model

Abstract The B cell lymphoma 2 (Bcl-2) family of proteins are key regulators of intrinsic apoptosis. The antiapoptotic protein myeloid cell leukemia 1 (Mcl-1), which is associated with high tumor grade, poor survival, and resistance to treatment, has emerged as a promising candidate for treating hematological and solid cancers. Herein, we report the structure-guided design of small molecule macrocyclic Mcl-1 inhibitors based on the (R)-methyl-dihydropyrazinoindolone scaffold our group has previously disclosed. The macrocyclic inhibitors bind Mcl-1 with subnanomolar affinity and offer improved potency in cell culture growth inhibition assays. Inhibitor 13 achieved tumor regression in a lung cancer-derived tumor xenograft model in mice as a monotherapy. The improved potency of the macrocyclic series allowed replacement of heretofore conserved indole carboxylic acid moiety, resulting in neutral inhibitors. Amide inhibitor 25 displayed a >10-fold increase in oral bioavailability as compared to acid-containing macrocyclic or acyclic inhibitors.

Pharmacology & Pharmacy↗
DOE OSTI2025

Synthesis of Sandwich-α-Diimine Ligands via Copper-Mediated Stille Coupling

While sandwich diimines have found use in transition metal catalysis, the general method for their preparation has been lacking. Here, this approach utilizes a copper-mediated Stille-type coupling between aryl stannanes and α-diimines bearing 8-bromonaphthylimino group in commercial-grade N,N-dimethylformamide solvent and employs CuI or thiophene-2-carboxylate to promote the reactions. No other additives or bases are required. Electron-poor, electron-rich, heterocyclic, and hindered aryl stannanes can be employed as coupling reagents. Ligand scaffolds derived from structurally diverse α-diketones can be used.

Catalysts↗
DOE OSTI2022

Nanoscale Compositional Mapping of Commercial LiNi 0.8 Co 0.15 Al 0.05 O 2 Cathodes Using Atom Probe Tomography

Nickel-rich cathodes provide improved specific capacity that lead to higher gravimetric energy density, critical for electric vehicles. However, poor long-term capacity retention at elevated temperatures/high C-rates (the rate of charge and discharge on a battery) stem from material issues: surface phase changes, corrosive side reactions with the electrolyte, ion dissolution and propagation of cracks. Introducing dopants, developing nanoscale surface coatings and graded core-shell structures have all improved the electrochemical performance of nickel-rich cathodes. However, a material level understanding on the effect of Li composition and distribution in Ni-rich cathodes is limited, due to a lack of characterization methods available that can directly image Li at the nanoscale. Hence, it is critical to establish methods such as atom probe tomography (APT), having both nanometer scale spatial resolution and high compositional sensitivity to quantitatively analyze battery cathodes. To fully realize its potential as a method for quantitative compositional analysis of commercial Li-ion batteries, we provide a comprehensive description of the challenges in sample preparation and analyze the dependency of the analysis parameters, specifically laser pulse energy on the measured stoichiometry of elements in a high Ni content cathode material; LiNi 0.8 Co 0.15 Al 0.05 O 2 (NCA). In this work, our findings show the stoichiometry variations cannot be explained by charge state ratios or Ga implantation damage alone during FIB preparation, indicating that additional factors such as crystallographic orientation may need to be considered to achieve quantitative nanoscale compositional analysis of such battery cathodes using APT.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Synthesis of Tunable SnS-TaS 2 Nanoscale Superlattices

Nanoscale superlattices represent a compelling platform for designed materials as the specific identity and spatial arrangement of constituent layers can lead to tunable properties. A number of kinetically stabilized, nonepitaxial superlattices with almost limitless structural tunability have been reported in telluride and selenide chemistries but have not yet been extended to sulfides. Here, we present SnS-TaS 2 nanoscale superlattices with tunable layer architecture. Layered amorphous precursors are prepared as thin films programmed to mimic the targeted superlattice; subsequent low temperature annealing activates self-assembly into crystalline nanocomposites. We investigate structure and composition of superlattices comprised of monolayers of TaS 2 and 3–7 monolayers of SnS per repeating unit. Furthermore, a graded precursor preparation approach is introduced, allowing stabilization of superlattices with multiple stacking sequences in a single preparation. Controlled synthesis of the architecture of nanoscale superlattices is a critical path toward tuning their exotic properties and enabling integration with electronic, optical, or quantum devices.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Spatial Interactions in Hydrogenated Perovskite Nickelate Synaptic Networks

A key aspect of how the brain learns and enables decision-making processes is through synaptic interactions. Electrical transmission and communication in a network of synapses are modulated by extracellular fields generated by ionic chemical gradients. Emulating such spatial interactions in synthetic networks can be of potential use for neuromorphic learning and the hardware implementation of artificial intelligence. Here, in this work, we demonstrate that in a network of hydrogen-doped perovskite nickelate devices, electric bias across a single junction can tune the coupling strength between the neighboring cells. Electrical transport measurements and spatially resolved diffraction and nanoprobe X-ray and scanning microwave impedance spectroscopic studies suggest that graded proton distribution in the inhomogeneous medium of hydrogen-doped nickelate film enables this behavior. We further demonstrate signal integration through the coupling of various junctions.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Copper Iodide-Mediated Synthesis of α-Diimine Ligands from Bis(imidoyl chlorides) and Arylstannanes

Aryl-substitued α-diimines were prepared by employing an operationally simple copper iodide-mediated Stille type coupling between polyfluoro(chloro)aryl tributylstannanes and bis(imidoyl chlorides). Reactions proceed in commercial grade N, N-dimethylformamide (DMF) solvent at 70 ºC and require no additives or bases. Couplings are successful for aryl stannanes possessing two or more fluoro or chloro substituents on the aromatic ring. Products are obtained in moderate to good yields. Furthermore, this methodology allows for a simple synthesis of α-diimine ligands potentially useful in olefin polymerization as well as other catalytic transformations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Interplay Between Strain and Thickness on the Effective Carrier Lifetime of Buffer-Mediated Epitaxial Germanium Probed by the Photoconductance Decay Technique

We report contactless effective minority carrier lifetime of epitaxially grown unstrained and in-plane <110> biaxially tensile-strained (001) germanium (..epsilon..-Ge) epilayers measured using microwave-reflectance photoconductance decay measurements. Strained Ge epilayers were grown using InxGa1-xAs linearly graded buffers on (001) GaAs substrates. Using homogeneous excitation of unstrained Ge epilayers, thickness-dependent separation of minority carrier lifetime components under low injection conditions yielded a bulk lifetime of 114 +/- 2 ns and low surface recombination velocity of 21.3 +/- 0.04 cm/s. More notably, an effective minority carrier lifetime of >100 ns obtained from sub-50 nm 1.6% tensile-strained Ge epilayers showed no degradation relative to the unstrained counterpart. Detailed material characterization using X-ray diffractometry revealed successful strain transfer of 0.61 and 0.89% to the Ge epilayers via InxGa1-xAs metamorphic buffers and confirms pseudomorphic growth. Lattice coherence observed at the e-Ge epilayer and InxGa1-xAs buffer heterointerfaces via transmission electron microscopy substantiates the prime material quality achieved. The relatively high carrier lifetimes achieved are an indicator of excellent material quality and provide a path forward to realize low-threshold Ge laser sources.

bulk lifetime↗
DOE OSTI2021

Flexible Zn-MOF with Rare Underlying scu Topology for Effective Separation of C6 Alkane Isomers

Adsorptive separation by porous solids provides an energy-efficient alternative for the purification of important chemical species compared to energy-intensive distillations. Particularly, the separation of linear hexane isomers from its branched counterparts is crucial to produce premium grade gasoline with high research octane number (RON). Herein, we report the synthesis of a new, flexible zinc-based metal-organic framework, [Zn 5 (μ 3 -OH) 2 (adtb) 2 (H 2 O) 5 ·5 DMA] (Zn-adtb), constructed from a butterfly shaped carboxylate linker with underlying (4,8)-connected scu topology capable of separating the C6 isomers nHEX, 3MP, and 23DMB. The sorbate-sorbent interactions and separation mechanisms were investigated and analyzed through in situ FTIR, solid state NMR measurements and computational modeling. Here these studies reveal that Zn-adtb discriminates the nHEX/3MP isomer pair through a kinetic separation mechanism and the nHEX/23DMB isomer pair through a molecular sieving mechanism. Column breakthrough measurements further demonstrate the efficient separation of linear nHEX from the mono- and dibranched isomers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Reduced Recombination and Improved Performance of CdSe/CdTe Solar Cells due to Cu Migration Induced by Light Soaking

The performance of CdTe solar cells has advanced impressively in recent years with the incorporation of Se. Instabilities associated with light soaking and copper reorganization have been extensively examined for the previous generation of CdS/CdTe solar cells, but instabilities in Cu-doped Se-alloyed CdTe devices remain relatively unexplored. In this work, we fabricated a range of CdSe/CdTe solar cells by sputtering CdSe layers with thicknesses of 100, 120, 150, 180, and 200 nm on transparent oxide-coated glass and then depositing CdTe by close-spaced sublimation. After CdCl 2 annealing, Cu-doping, and back metal deposition, a variety of analyses were performed both before and after light soaking to understand the changes in device performance. The device efficiency was degraded with light soaking in most cases, but devices fabricated with a CdSe layer thickness of 120 nm showed reasonably good efficiency initially (13.5%) and a dramatic improvement with light soaking (16.5%). Here, the efficiency improvement is examined within the context of Cu ion reorganization that is well known for CdS/CdTe devices. Low-temperature photoluminescence data and V oc versus temperature measurements indicate a reduction in nonradiative recombination due to the passivation of defects and defect complexes in the graded CdSe x Te 1–x layer.

CdSexTe1−x↗
DOE OSTI2025

Chemical Vapor Transformation of Lithium Metal: Mechanism and Enhanced Stability

Constructing a stable solid electrolyte interface (SEI) with high productivity and scalability is essential for the practical application of thin Li metal anodes. Here, in this work, we report a chemical vapor transformation (CVT) strategy in which Li metal is exposed to trimethylaluminum (TMA), inducing a rapid and spontaneous surface reaction that forms a robust, multilayered SEI. In situ quartz crystal microbalance (QCM) and quadrupole mass spectrometry (QMS), combined with ex situ X-ray photoelectron spectroscopy (XPS), UV Raman spectroscopy, and density functional theory (DFT) calculations, reveal that TMA removes the native passivation layer, reacts with Li metal, and drives a coupled bulk-surface transformation involving Li–Al interdiffusion. The resulting SEI exhibits a chemically graded structure consisting of an inner Li–Al alloy and an outer amorphous carbon layer formed via demethylation and ligand-exchange pathways. This modified surface exhibits significantly enhanced stability compared to that of bare Li in electrochemical cycling using liquid and solid-state electrolytes. This work unveils a unique surface-mediated bulk transformation mechanism for lithium metal and establishes CVT as a scalable and fundamentally distinct approach for the interfacial engineering of reactive metals.

Li metal↗
DOE OSTI2026

Miscibility and Cocrystallization in Ethylene–Vinyl Alcohol Copolymer Blends

The compatibility among different ethylene−vinyl alcohol (EVOH) copolymer grades plays a crucial role in determining how easily they can be recycled when present together in a mixed waste stream. In this work, melt miscibility and cocrystallization in 50/50 wt/wt binary blends of EVOH copolymers with differing ethylene content were studied. Blends with up to a 21 mol % difference in composition were analyzed. Thin films of miscible blends appeared homogeneous in the melt as observed under an optical microscope, whereas AFM height images showed that immiscible blends underwent surface roughening due to phase separation. For copolymers with modest composition differences, the blend behaved as a single component, showing single, narrow melting and crystallization peaks in DSC thermograms, indicating cocrystallization at the level of crystal stems. Interestingly, even phase-separated blends demonstrated partial cocrystallization due to partial miscibility of the components in the molten phase-separated domains. The extent of cocrystallization is governed by the difference in freezing points of the components; rapid cooling increased cocrystallization in the blends. The maximum compositional difference allowed for miscibility is not constant but depends on the blend’s average comonomer content, in agreement with the “miscibility window” calculated from literature pressure−volume−temperature behavior for the individual EVOH copolymers and regular mixing theory. This study helps illuminate the effect of copolymer composition on miscibility, as well as cocrystallization behavior in blends of random copolymers with cocrystallizable units.

Cocrystallization↗
DOE OSTI2025

Mechanically and Chemically Robust Lanmodulin-Functionalized Silk Sponges for Rare Earth Element Sequestration

The extraction of rare-earth elements (REEs) from low-grade sources like electronic waste (E-waste) could supplement current unsustainable mining practices. REEs are crucial for various industries, but supply struggles to meet growing demand. Herein, we present an environmentally friendly method for REE extraction using silk protein sponges functionalized with lanmodulin (LanM), a protein that selectively binds REEs. These sponges are relatively facile to fabricate and scale, while offering highly selective REE binding. The REEs can then be recovered via simple acid leaching, allowing sponge reuse for multiple cycles as well as specific desorption of different REEs by changing the pH of the desorption buffer. Finally, this method avoids harmful solvents used in traditional extraction and enables recycling of REEs from industrial and E-waste.

REEs↗