Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “functional modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

The inverse problem of constructing a gravimetric geoid

Computation of a single geoidal height from gravity acceleration data formally requires that the latter be known everywhere on the earth. A computational procedure based on linear inverse theory for estimating geoidal heights from incomplete sets of data is presented. The same scheme can be used to estimate gravity accelerations from altimetry-derived geoids. The systematic error owing to lack of data and the choice of a particular inverse operator is described by using resolution functions and their spherical harmonic expansions. An rms value of this error is also estimated by assuming a spectrum for the unknown geoid. The influence of the size of the data region, the spacing between data, the filtering applied to the data, and the model weighting function chosen are all quantified in a spherical geometry. The examples presented show that when low degree spherical harmonic coefficients are available - from satellite orbit analysis - a band-passed version of the geoid can be constructed from local gravity data, even with a relatively restricted data set.

Zlotnicki, V.↗
NASA NTRS2017

Modeling and Simulating Airport Surface Operations with Gate Conflicts

The Surface Operations Simulator and Scheduler (SOSS) is a fast-time simulation platform used to develop and test future surface scheduling concepts such as NASAs Air Traffic Demonstration 2 of time-based surface metering at Charlotte Douglas International Airport (CLT). Challenges associated with CLT surface operations have driven much of SOSS development. Recently, SOSS functionality for modeling hardstand operations was developed to address gate conflicts, which occur when an arrival and departure wish to occupy the same gate at the same time. Because surface metering concepts such as ATD2 have the potential to increase gates conflicts as departure are held at their gates, it is important to study the interaction between surface metering and gate conflict management. Several approaches to managing gate conflicts with and without the use of hardstands were simulated and their effects on surface operations and scheduler performance compared.

Zelinski, Shannon↗
NASA NTRS1993

Kalman filter estimation of attitude and gyro bias with the QUEST observation model

The loss function for the Wahba attitude estimation problem employs unit vector observations with scalar weights. It is usually associated with the QUEST observation model, where the actual sensor noise is assumed the same for all components of the observed vector, regardless of the position in the field of view. The QUEST model has the great advantage of being sensor-independent except for the scalar parameter that characterizes the sensor errors. Although efficient algorithms for solving the Wahba problem exist, extending these algorithms to estimate gyro biases or sensor alignments has had mixed success. However, it is straightforward to estimate bias and alignment parameters with a Kalman filter. This paper investigates the use of an extended Kalman filter for the attitude and gyro bias that incorporates the QUEST observation model, to be referred to as the Unit Vector Filter (UVF). The UVF results are compared with those from a more conventional filter, the Real-Time Sequential Filter (RTSF), for which the residual is the two-dimensional projection of the unit vector onto the plane perpendicular to the sensor boresight. The RTSF is similar in design to that used by Multimission Modular Spacecraft for onboard attitude determination. An apparent obstacle to the use of unit vectors as measurements is their singular noise covariance matrix. Shuster has shown that this problem should not affect filter performance. The UVF and RTSF are tested using actual flight data from the Extreme Ultraviolet Explorer (EUVE). It is found that these filters generate nearly identical attitude and gyro bias estimates, thus validating the use of unit vectors and the QUEST noise model.

Sedlak, J.↗
NASA NTRS2017

Modeling and Simulating Airport Surface Operations with Gate Conflicts

The Surface Operations Simulator and Scheduler (SOSS) is a fast-time simulation platform used to develop and test future surface scheduling concepts such as NASA's Air Traffic Demonstration 2 of time-based surface metering at Charlotte Douglass International Airport (CLT). Challenges associated with CLT surface operations have driven much of SOSS development. Recently, SOSS functionality for modeling harsdstand operations was developed to address gate conflicts, which occur when an arrival and departure wish to occupy the same gate at the same time. Because surface metering concepts such as ATD2 have the potential to increase gates conflicts as departures are held at their gates, it is important to study the interaction between surface metering and gate conflict management. Several approaches to managing gate conflicts with and without the use of hardstands were simulated and their effects on surface operations and scheduler performance compared.

Zelinski, Shannon↗
DOE OSTI2022

Positive-Sequence Phasor Modeling of Droop-Controlled, Grid-Forming Inverters with Fault Current Limiting Function

Traditional positive-sequence phasor models of droop-controlled, grid-forming inverters do not have the fault current limiting function. During a short-circuit fault the model generates unrealistic high fault current making the simulation results less practical. This paper develops a fault current limiting function for the positive-sequence phasor model of droop-controlled, grid-forming inverters, which can effectively limit the inverter output current at the predefined maximum during faults. A user-written model has been developed for the commercially-available software Siemens/PTI PSS/E. Fault studies on a modified IEEE 39-bus system with all grid-forming inverters verify the effectiveness of the developed fault current limiting function. The proposed model can be used to evaluate how the limited fault currents of droop-controlled, grid-forming inverters impact the bulk power system transient stability under fault conditions.

Du, Wei↗
NASA NTRSDate not supplied

Development of An Improved BRDF Hotspot Model and its Use in VLIDORT to Study the Impact of Atmospheric Scattering on Hotspot Directional Signatures in the Atmosphere

The term “hotspot” refers to the sharp increase of reflectance occurring when incident (solar) and reflected (viewing) directions almost coincide in the backscatter direction. The accurate simulation of hotspot directional signatures is important for many remote sensing applications. The RossThick-LiSparse-Reciprocal (RTLSR) Bidirectional Reflectance Distribution Function (BRDF) model is widely used in radiative transfer simulations, and the hotspot model mostly used is from Maignan- Bréon but it typically requires large values of numerical quadrature and Fourier expansion terms in order to represent the hotspot accurately. To improve its use in atmospheric radiative transfer (RT) model simulations, in this paper we have developed a modified version based on the Maignan-Bréon’s hotspot BRDF model that converge much faster numerically, making it more practical for use in RT models that require Fourier expansion of BRDF to simulate the top-of-atmosphere (TOA) hotspot signatures. Using the vector linearized discrete ordinate radiative transfer model (VLIDORT), we found that reasonable TOA hotspot accuracy can be obtained with just 23 Fourier terms for clear atmospheres, and 63 Fourier terms for atmospheres with aerosol scattering. One advantage of this modified model is that the new hotspot model agrees very well with the original RossThick model away the hotspot region, making it is very convenient to use in the condition with and without hotspot in applications. This model can calculate the amplitude of hot spot accurately, and has been added in the most recent version of VLIDORT. However, there are some difference of this modified model with the original model for scattering angle close the hot spot, and it may not be appropriate for those who need an exact representation of the hot spot angular signature close to hot spot.

Xiaozhen (Shawn) Xiong↗
NASA NTRS1993

Effects of discrete-source outgassing on motions of periodic comets and discontinuous orbital anomalies

Isoline maps of the Style II nongravitational parameters A1 and A2 of periodic comets are presented for a baseline model as functions of the parameters of the inertially fixed spin vector and the source's location-dependent thrust angle. The parameters A1 and A2 for a collection of sources are equal to the sum of their values for the individual contributors, thus depending on the source distribution. The model is consistent with even the most extreme among detected perturbations, including instances of rapid temporal changes in A2 and the discontinuous orbital anomalies, which are interpreted as products of a sudden redistribution of the transferred momentum due to episodic activation of short-lived sources. It is argued that the lifetimes of active regions vary considerably from case to case, and forced precession of the nucleus strongly influences the comet's activity pattern.

Sekanina, Zdenek↗
DOE OSTI2021

Extended Lagrangian Born–Oppenheimer molecular dynamics for orbital-free density-functional theory and polarizable charge equilibration models

We report extended Lagrangian Born–Oppenheimer molecular dynamics (XL-BOMD) is formulated for orbital-free Hohenberg–Kohn density-functional theory and for charge equilibration and polarizable force-field models that can be derived from the same orbital-free framework. The purpose is to introduce the most recent features of orbital-based XL-BOMD to molecular dynamics simulations based on charge equilibration and polarizable force-field models. These features include a metric tensor generalization of the extended harmonic potential, preconditioners, and the ability to use only a single Coulomb summation to determine the fully equilibrated charges and the interatomic forces in each time step for the shadow Born–Oppenheimer potential energy surface. The orbital-free formulation has a charge-dependent, short-range energy term that is separate from long-range Coulomb interactions. This enables local parameterizations of the short-range energy term, while the long-range electrostatic interactions can be treated separately. The theory is illustrated for molecular dynamics simulations of an atomistic system described by a charge equilibration model with periodic boundary conditions. The system of linear equations that determines the equilibrated charges and the forces is diagonal, and only a single Ewald summation is needed in each time step. The simulations exhibit the same features in accuracy, convergence, and stability as are expected from orbital-based XL-BOMD.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1987

Simplified curve fits for the thermodynamic properties of equilibrium air

New, improved curve fits for the thermodynamic properties of equilibrium air have been developed. The curve fits are for pressure, speed of sound, temperature, entropy, enthalpy, density, and internal energy. These curve fits can be readily incorporated into new or existing computational fluid dynamics codes if real gas effects are desired. The curve fits are constructed from Grabau-type transition functions to model the thermodynamic surfaces in a piecewise manner. The accuracies and continuity of these curve fits are substantially improved over those of previous curve fits. These improvements are due to the incorporation of a small number of additional terms in the approximating polynomials and careful choices of the transition functions. The ranges of validity of the new curve fits are temperatures up to 25 000 K and densities from 10 to the -7 to 10 to the 3d power amagats.

Srinivasan, S.↗
DOE OSTI2022

In-beam γ-ray spectroscopy of 32 Mg via direct reactions

Background: The nucleus 32 Mg (N=20 and Z=12) plays a central role in the so-called “island of inversion,” where in the ground states sd-shell neutrons are promoted to the fp-shell orbitals across the shell gap, resulting in the disappearance of the canonical neutron magic number N=20. Purpose: The primary goals of this work are to extend the level scheme of 32Mg, provide spin-parity assignments to excited states, and discuss the microscopic structure of each state through comparisons with theoretical calculations. Method: In-beam γ-ray spectroscopy of 32 Mg was performed using two direct-reaction probes: one-neutron (two-proton) knockout reactions on 33 Mg ( 34 Si). Final-state exclusive cross sections and parallel momentum distributions were extracted from the experimental data and compared with eikonal-based reaction model calculations combined with shell-model overlap functions. Results: Owing to the remarkable selectivity of the one-neutron and two-proton knockout reactions, a significantly updated level scheme for 32 Mg, which exhibits negative-parity intruder and positive-parity normal states, was constructed. The experimental results were confronted with four different nuclear structure models. Conclusions: In some of these models, different aspects of 32 Mg and the transition into the island of inversion are well described. However, unexplained discrepancies remain, and, even with the help of these state-of-the-art theoretical approaches, the structure of this key nucleus is not yet fully captured.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Representing plant diversity in land models: An evolutionary approach to make “Functional Types” more functional

Plants are critical mediators of terrestrial mass and energy fluxes, and their structural and functional traits have profound impacts on local and global climate, biogeochemistry, biodiversity, and hydrology. Yet, Earth System Models (ESMs), our most powerful tools for predicting the effects of humans on the coupled biosphere-atmosphere system, simplify the incredible diversity of land plants into a handful of coarse categories of "Plant Functional Types" (PFTs) that often fail to capture ecological dynamics such as biome distributions. The inclusion of more realistic functional diversity is a recognized goal for ESMs, yet there is currently no consistent, widely accepted way to add diversity to models, that is, to determine what new PFTs to add and with what data to constrain their parameters. Here we review approaches to representing plant diversity in ESMs and draw on recent ecological and evolutionary findings to present an evolution-based functional type approach for further disaggregating functional diversity. Specifically, the prevalence of niche conservatism, or the tendency of closely related taxa to retain similar ecological and functional attributes through evolutionary time, reveals that evolutionary relatedness is a powerful framework for summarizing functional similarities and differences among plant types. We advocate that Plant Functional Types based on dominant evolutionary lineages ("Lineage Functional Types") will provide an ecologically defensible, tractable, and scalable framework for representing plant diversity in next-generation ESMs, with the potential to improve parameterization, process representation, and model benchmarking. We highlight how the importance of evolutionary history for plant function can unify the work of disparate fields to improve predictive modeling of the Earth system.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Intermittent Defect Fluctuations in Oxide Heterostructures

Abstract The heterogeneous nature, local presence, and dynamic evolution of defects typically govern the ionic and electronic properties of a wide variety of functional materials. While the last 50 years have seen considerable efforts into development of new methods to identify the nature of defects in complex materials, such as the perovskite oxides, very little is known about defect dynamics and their influence on the functionality of a material. Here, the discovery of the intermittent behavior of point defects (oxygen vacancies) in oxide heterostructures employing X‐ray photon correlation spectroscopy is reported. Local fluctuations between two ordered phases in strained SrCoO x with different degrees of stability of the oxygen vacancies are observed. Ab‐initio‐informed phase‐field modeling reveals that fluctuations between the competing ordered phases are modulated by the oxygen ion/vacancy interaction energy and epitaxial strain. The results demonstrate how defect dynamics, evidenced by measurement and modeling of their temporal fluctuations, give rise to stochastic properties that now can be fully characterized using coherent X‐rays, coupled for the first time to multiscale modeling in functional complex oxide heterostructures. The study and its findings open new avenues for engineering the dynamical response of functional materials used in neuromorphic and electrochemical applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Competing conduction mechanisms in high performance carbon nanotube fibers

The performance of carbon nanotube (CNT) cables, a contender for copper-wire replacement, is tied to its metallic and semi-conducting-like conductivity responses with temperature; the origin of the semi-conducting-like response however is an underappreciated incongruity in literature. With controlled aspect-ratio and doping-degree, over 61 unique cryogenic experiments including anisotropy and Hall measurements, CNT cable performance is explored at extreme temperatures (65 mK) and magnetic-fields (60 T). A semi-conducting-like conductivity response with temperature becomes temperature-independent approaching absolute-zero, uniquely demonstrating for the first time the necessity of heterogeneous fluctuation induced tunneling; complete de-doping leads to localized hopping, contrasting graphite's pure metallic-like response. High-field magneto-resistance (including novel +22 % longitudinal magneto-resistance near room-temperature) is analyzed with hopping and classical two-band models, both yielding a similar parameter useful for conductor development. Varying field-orientation angle uncovers significant two- and four-fold symmetries that are shown to be from Aharonov-Bohm-like corrections to the curvature-induced bandgap, a first for macroscale CNT fibers. Tight-binding calculations using Green's Function formalism model the largest, coherent transport to-date in commensurate CNT bundles in magnetic-field, revealing non-uniform transmission across bundle cross-sections with doping restoring uniformity; independent of doping, transport in bundle-junction-bundle systems are predominantly from CNTs adjacent to the other bundle—demonstrating that smaller bundles are more efficient for electronic transport. The final impact is predicting the ultimate conductivity of heterogeneous CNT cables using temperature and field-dependent transport, surpassing conductivity of traditional metals.

36 MATERIALS SCIENCE↗
NASA NTRS1986

Simplified curve fits for the thermodynamic properties of equilibrium air

New improved curve fits for the thermodynamic properties of equilibrium air were developed. The curve fits are for p = p(e,rho), a = a(e,rho), T = T(e,rho), s = s(e,rho), T = T(p,rho), h = h(p,rho), rho = rho(p,s), e = e(p,s) and a = a(p,s). These curve fits can be readily incorporated into new or existing Computational Fluid Dynamics (CFD) codes if real-gas effects are desired. The curve fits were constructed using Grabau-type transition functions to model the thermodynamic surfaces in a piecewise manner. The accuracies and continuity of these curve fits are substantially improved over those of previous curve fits appearing in NASA CR-2470. These improvements were due to the incorporation of a small number of additional terms in the approximating polynomials and careful choices of the transition functions. The ranges of validity of the new curve fits are temperatures up to 25,000 K and densities from 10 to the minus 7th to 100 amagats (rho/rho sub 0).

Srinivasan, S.↗
NASA NTRSDate not supplied

An Overview of the Patch Integral Method (PIM), a New Heat Transfer Analysis Tool for Hypersonic Wind Tunnel Facilities at NASA Langley

NASA Langley’s hypersonic wind tunnels are heavily leveraged for planetary missions. The data collection method in these tunnels is thermography, and surface temperature measurements of the model surface are collected and reduced to produce surface heating data, as seen in Fig 1. However, during model injection, no temperature data are collected, and thus conventional, integral heat transfer methods cannot be used to solve for surface heating. A method was developed in the 1990’s to reduce this data despite the data gap, known as the step approximation method. The method assumes that the film coefficient behaves as a step function, the model is semi-infinite, and thermal properties are constant. With these simplifying assumptions, a Laplace transform can be performed to result in an equation that takes the initial temperature of the model and a temperature at some point in time to back out the film coefficient at that time. This is the method that is used in the current thermographic data reduction software, IHEAT. While computationally light-weight, the step approximation has several issues associated with it. The time-history of temperature is not accounted for, which is vital as heat transfer is an integral process. Additionally, the required semi-infinite assumption is unnecessary and might be violated during runtime. Thermal variation of material properties can have a sizeable impact on heating results and are not modeled by the method. This method also takes multiple seconds to “collapse” to a steady state, which is undesirable from both a facility and data reduction standpoint. The method is also very sensitive to the “effective time” approximation, an approximation of when heating instantaneously starts (which is a nonphysical simplification), and a small variation in this value can result in an error in heating results.

J. S. Cheatwood↗
DOE OSTI2025

Reconstructing the Wave Function of Magnetic Topological Insulators MnBi 2 ⁢Te 4 and MnBi 4 ⁢Te 7 Using Spin-Resolved Photoemission

Despite their importance for exotic quantum effects, the surface electronic structure of magnetic topological insulators MnBi 2 ⁢Te 4 and MnBi 4 ⁢Te 7 remains poorly understood. Using high-efficiency spin- and angle-resolved photoemission spectroscopy, we directly image the spin-polarization and orbital character of the surface states in both compounds and map our observations onto a model wave function to describe the complex spin-orbital texture, which solidifies our understanding of the surface band structure by establishing the single-band nature of the most prominent states. Most importantly, our analysis reveals a new mechanism for reducing the magnetic gap of the topological surface states based on the orbital composition of the wave function.

Han, Xue [SLAC National Accelerator Laboratory (SL↗
NASA NTRS1990

A model of the diffuse galactic gamma ray emission

The galaxy was observed to be a source of high energy gamma rays as shown by the two successful satellite experiments, SAS-2 and COS-B. It is generally understood that these diffuse gamma rays result from interactions between energetic cosmic rays and interstellar gas. This work makes use of the most recent data on the distribution of atomic and molecular hydrogen in the galaxy along with new estimates of gamma ray production functions to model the diffuse galactic gamma ray emission. The model allows various spatial distributions for cosmic rays in the Galaxy including non-axisymmetric ones. In the light of the expected data from EGRET (Energetic Gamma-Ray Experiment Telescope), an improved model of cosmic ray-matter-gamma ray interaction will provide new insights into the distribution of cosmic rays and the strength of its coupling to matter.

Sreekumar, Parameswaran↗