Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “form”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

NEAR-INFRARED CIRCULAR POLARIZATION SURVEY IN STAR-FORMING REGIONS: CORRELATIONS AND TRENDS

We have conducted a systematic near-infrared circular polarization (CP) survey in star-forming regions, covering high-mass, intermediate-mass, and low-mass young stellar objects. All the observations were made using the SIRPOL imaging polarimeter on the Infrared Survey Facility 1.4 m telescope at the South African Astronomical Observatory. We present the polarization properties of 10 sub-regions in 6 star-forming regions. The polarization patterns, extents, and maximum degrees of linear and circular polarizations are used to determine the prevalence and origin of CP in the star-forming regions. Our results show that the CP pattern is quadrupolar in general, the CP regions are extensive, up to 0.65 pc, the CP degrees are high, up to 20%, and the CP degrees decrease systematically from high- to low-mass young stellar objects. The results are consistent with dichroic extinction mechanisms generating the high degrees of CP in star-forming regions.

79 ASTRONOMY AND ASTROPHYSICS↗

Alma resolves the properties of star-forming regions in a dense gas disk at z ∼ 3

We exploit long baseline ALMA submillimeter observations of the lensed star-forming galaxy SDP 81 at z = 3.042 to investigate the properties of the interstellar medium (ISM) on scales of 50–100 pc. The kinematics of the {sup 12}CO gas within this system are well described by a rotationally supported disk with an inclination-corrected rotation speed, v{sub rot} = 320 ± 20 km s{sup −1,} and a dynamical mass of M{sub dyn} = (3.5 ± 1.0)× 10{sup 10} M{sub ⊙} within a radius of 1.5 kpc. The disk is gas-rich and unstable, with a Toomre parameter, Q = 0.30 ± 0.10, and so into star-forming regions with Jeans length L{sub J} ∼ 130 pc. We identify five star-forming regions within the ISM on these scales and show that their scaling relations between luminosity, line widths, and sizes are significantly offset from those typical of molecular clouds in local galaxies (Larson’s relations). These offsets are likely to be caused by the high external hydrostatic pressure for the ISM, P{sub tot}/k{sub B}∼ 40{sub −20}{sup +30} × 10{sup 7} K cm{sup −3}, which is ∼10{sup 4}× higher than the typical ISM pressure in the Milky Way. The physical conditions of the star-forming ISM and giant molecular clouds appear to be similar to those found in the densest environments in the local universe, such as those in the Galactic center.

79 ASTRONOMY AND ASTROPHYSICS↗

A HIGHER EFFICIENCY OF CONVERTING GAS TO STARS PUSHES GALAXIES AT z ∼ 1.6 WELL ABOVE THE STAR-FORMING MAIN SEQUENCE

Local starbursts have a higher efficiency of converting gas into stars, as compared to typical star-forming galaxies at a given stellar mass, possibly indicative of different modes of star formation. With the peak epoch of galaxy formation occurring at z > 1, it remains to be established whether such an efficient mode of star formation is occurring at high redshift. To address this issue, we measure the molecular gas content of seven high-redshift (z ∼ 1.6) starburst galaxies with the Atacama Large Millimeter/submillimeter Array and IRAM/Plateau de Bure Interferometer. Our targets are selected from the sample of Herschel far-infrared-detected galaxies having star formation rates (∼300–800 M{sub ⊙} yr{sup −1}) elevated (≳4×) above the star-forming main sequence (MS) and included in the FMOS-COSMOS near-infrared spectroscopic survey of star-forming galaxies at z ∼ 1.6 with Subaru. We detect CO emission in all cases at high levels of significance, indicative of high gas fractions (∼30%–50%). Even more compelling, we firmly establish with a clean and systematic selection that starbursts, identified as MS outliers, at high redshift generally have a lower ratio of CO to total infrared luminosity as compared to typical MS star-forming galaxies, although with a smaller offset than expected based on past studies of local starbursts. We put forward a hypothesis that there exists a continuous increase in star formation efficiency with elevation from the MS with galaxy mergers as a possible physical driver. Along with a heightened star formation efficiency, our high-redshift sample is similar in other respects to local starbursts, such as being metal rich and having a higher ionization state of the interstellar medium.

79 ASTRONOMY AND ASTROPHYSICS↗

Star-forming S0 Galaxies in SDSS-MaNGA: fading spirals or rejuvenated S0s?

ABSTRACT We investigate the origin of rare star formation in an otherwise red-and-dead population of S0 galaxies, using spatially resolved spectroscopy. Our sample consists of 120 low redshift (z < 0.1) star-forming S0 (SF-S0) galaxies from the SDSS-IV MaNGA DR15. We have selected this sample after a visual inspection of deep images from the DESI Legacy Imaging Surveys DR9 and the Subaru/HSC-SSP survey PDR3 to remove contamination from spiral galaxies. We also construct two control samples of star-forming spirals (SF-Sps) and quenched S0s (Q-S0s) to explore their evolutionary link with the star-forming S0s. To study star formation at resolved scales, we use dust-corrected H α luminosity and stellar density (Σ⋆) maps to construct radial profiles of star formation rate (SFR) surface density (ΣSFR) and specific SFR (sSFR). Examining these radial profiles, we find that star formation in SF-S0s is centrally dominated as opposed to disc-dominated star formation in spirals. We also compared various global (size–mass relation, bulge-to-total luminosity ratio) and local (central stellar velocity dispersion) properties of SF-S0s to those of the control sample galaxies. We find that SF-S0s are structurally similar to the quenched S0s and are different from star-forming spirals. We infer that SF-S0s are unlikely to be fading spirals. Inspecting stellar and gas velocity maps, we find that more than $50{{\ \rm per\ cent}}$ of the SF-S0 sample shows signs of recent galaxy interactions such as kinematic misalignment, counter-rotation, and unsettled kinematics. Based on these results, we conclude that in our sample of SF-S0s, star formation has been rejuvenated, with minor mergers likely to be a major driver.

79 ASTRONOMY AND ASTROPHYSICS↗

Interacting galaxies in the IllustrisTNG simulations – V. Comparing the influence of star-forming versus passive companions

ABSTRACT We study interacting galaxy pairs in the TNG100-1 and TNG300-1 cosmological simulations using previously generated closest companion samples. We study the specific star-formation rates (sSFRs) of massive ($10^{10} \, {\rm M}_{\odot } \lt M_* \lt 10^{12} \, {\rm M}_{\odot }$ ) galaxies at z ≤ 0.2 as a function of separation from the closest companion galaxy. We split our sample based on whether the companion galaxy is star-forming or passive. We find that galaxies with close star-forming companions have sSFRs that are enhanced (on average) by a factor of 2.9 ± 0.3 in TNG100-1 and 2.27 ± 0.06 in TNG300-1 compared to controls, with enhancements present out to separations of ∼300 kpc. Galaxies with passive companions in TNG300-1 exhibit mild sSFR suppression (∼12 per cent) at 100–300 kpc and small sSFR enhancements at separations below 50 kpc. sSFR suppression is strongest in pairs where the galaxy’s stellar mass is more than 2 times that of its passive companion. By generating a stellar mass-matched (‘twinned’) sample in TNG300-1, we show that differences in sSFR trends between companion types are not a result of intrinsic stellar mass differences in star-forming versus passive galaxies. We compare with an analogous sample of galaxy pairs from SDSS, finding consistent results between observations and simulations. Overall, we find that star-forming galaxies show enhanced sSFRs regardless of companion type, but that galaxies with close passive companions are more likely to be passive themselves.

Astronomy & Astrophysics↗

The IRX–β relation in kpc-sized star-forming regions in nearby galaxies

The effect of dust attenuation on a galaxy’s light depends on a number of physical properties, such as geometry and dust composition, both of which can vary across the faces of galaxies. To investigate this variation, we continue analysis on star-forming regions in 29 galaxies studied previously. We analyse these regions using Swift /UV Optical Telescope and Wide-field Infrared Survey Explorer images, as well as Sloan Digital Sky Survey/Mapping Nearby Galaxies at Apache Point Observatory emission line maps to constrain the relationship between the infrared excess (IRX) and the ultraviolet spectral index, β, for each star-forming region. This relationship can be used to constrain which dust attenuation law is appropriate for the region. We find that the value of D n (4000) for a region is correlated with both IRX and β, and that the gas-phase metallicity is strongly correlated with the IRX. This correlation between metallicity and IRX suggests that regardless of aperture, metal-rich regions have steeper attenuation curves. We also find that integrated galactic light follows nearly the same IRX–β relationship as that found for kpc-sized star-forming regions. Here, this similarity may suggest that the attenuation law followed by the galaxy is essentially the same as that followed by the regions, although the relatively large size of our star-forming regions complicates this interpretation because optical opacity and attenuation curves have been observed to vary within individual galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

Transition form factors: γ * + p → Δ ( 1232 ) , Δ ( 1600 )

We report that electroproduction form factors describing the γ * p → Δ + ( 1232 ) , Δ + ( 1600 ) transitions are computed using a fully dynamical diquark-quark approximation to the Poincaré-covariant three-body bound-state problem in relativistic quantum field theory. In this approach, the Δ ( 1600 ) is an analogue of the Roper resonance in the nucleon sector, appearing as the simplest radial excitation of the Δ ( 1232 ) . Precise measurements of the γ * p → Δ + ( 1232 ) transition already exist on 0 ≤ Q 2 ≲ 8 GeV 2 , and the calculated results compare favorably with the data outside the meson-cloud domain. The predictions for the γ * p → Δ + ( 1600 ) magnetic dipole and electric quadrupole transition form factors are consistent with the empirical values at the real photon point, and extend to Q 2 ≈ 6 m p 2 , enabling a meaningful direct comparison with experiment once analysis of existing data is completed. In both cases, the electric quadrupole form factor is particularly sensitive to deformation of the Δ -baryons. Interestingly, while the γ * p → Δ + ( 1232 ) transition form factors are larger in magnitude than those for γ * p → Δ + ( 1600 ) in some neighborhood of the real photon point, this ordering is reversed on Q 2 ≳ 2 m p 2 , suggesting that the γ * p → Δ + ( 1600 ) transition is more localized in configuration space.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

High-quality axions from higher-form symmetries in extra dimensions

The extradimensional axion solves the strong C P problem while largely circumventing the quality problem that plagues its four-dimensional counterparts. Such high quality can be clearly understood in terms of the generalized global symmetries of the higher-dimensional theory. We emphasize that an electric one-form symmetry is entirely responsible for protecting the potential of axions arising from 5D gauge theories and use this to systematically characterize the extradimensional axion quality problem. We identify three ways of breaking this one-form symmetry to generate an axion potential: adding electrically charged matter, gauging a magnetic higher-form symmetry, and turning on an Adler-Bell-Jackiw anomaly. In the latter case, we identify new ways of generating an axion potential via extradimensional magnetic monopoles. We also discuss how the axion is modified if the protective electric one-form symmetry is itself gauged. Finally, we relate these effects to gravitational expectations for the quality problem via generalized weak gravity conjectures. The clarity that generalized symmetries bring to the extradimensional axion quality problem highlights their relevance to particle phenomenology. Published by the American Physical Society 2025

Craig, Nathaniel↗

Vanishing of the CP asymmetry in leptogenesis due to form dominance

We emphasize that the vanishing of the CP asymmetry in leptogenesis, previously observed for models with tribimaximal mixing and family symmetry, may be traced to a property of the type I seesaw mechanism satisfied by such models known as form dominance, corresponding to the case of a diagonal Casas-Ibarra R-matrix. Form dominance leads to vanishing flavor-dependent CP asymmetries irrespective of whether one has tribimaximal mixing or a family symmetry. Successful leptogenesis requires violation of form dominance, but not necessarily violation of tribimaximal mixing. This may be achieved in models where the family symmetry responsible for tribimaximal mixing is implemented indirectly and a strong neutrino mass hierarchy is present with the form dominance broken only softly by the right-handed neutrino responsible for the lightest neutrino mass, as in constrained sequential dominance.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Arbitrary p-form Galileons

We show that scalar, 0-form, Galileon actions--models whose field equations contain only second derivatives--can be generalized to arbitrary even p-forms. More generally, they need not even depend on a single form, but may involve mixed p combinations, including equal p multiplets, where odd p fields are also permitted: We construct, for given dimension D, general actions depending on scalars, vectors, and higher p-form field strengths, whose field equations are of exactly second derivative order. We also discuss and illustrate their curved-space generalizations, especially the delicate nonminimal couplings required to maintain this order. Concrete examples of pure and mixed actions, field equations, and their curved-space extensions are presented.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Up, down, and strange nucleon axial form factors from lattice QCD

Here, we report a calculation of the nucleon axial form factors $G_A^q(Q^2)$ and $G_P^q(Q^2)$ for all three light quark flavors $q\in\{u,d,s\}$ in the range $0\leq Q^2\lesssim 1.2\text{ GeV}^2$ using lattice QCD. Our work was done using a single ensemble with pion mass 317 MeV and made use of the hierarchical probing technique to efficiently evaluate the required disconnected loops. We perform nonperturbative renormalization of the axial current, including a nonperturbative treatment of the mixing between light and strange currents due to the singlet-nonsinglet difference caused by the axial anomaly. The form factor shapes are fit using the model-independent $z$ expansion. From $G_A^q(Q^2)$, we determine the quark contributions to the nucleon spin and axial radii. By extrapolating the isovector $G_P^{u-d}(Q^2)$, we obtain the induced pseudoscalar coupling relevant for ordinary muon capture and the pion-nucleon coupling constant. We also found that the disconnected contributions to $G_P$ form factors are large, and give an interpretation based on the dominant influence of the pseudoscalar poles in these form factors.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Secondary structure of double-stranded DNA under stretching: Elucidation of the stretched form

Almost two decades ago, measurements of force versus extension on isolated double-stranded DNA molecules revealed a force plateau. This unusual stretching phenomenon in DNA suggests that the long molecules may be extended from the usual B form into a new conformation. Different models have been proposed to describe the nature of DNA in its stretched form, S-DNA. Using atomic force microscopy combined with a molecular combing method, we identified the structure of {lambda}-phage DNA for different stretching values. We provide strong evidence for the existence of a first-order transition between B form and S form. Beyond a certain extension of the natural length, DNA molecules adopt a new double-helix conformation characterized by a diameter of 1.2 nm and a helical pitch of18 nm.

36 MATERIALS SCIENCE↗

Sixty years from discovery to solution: crystal structure of bovine liver catalase form III

The crystallization and structural characterization of bovine liver catalase (BLC) has been intensively studied for decades. Forms I and II of BLC have previously been fully characterized using single-crystal X-ray diffraction. Form III has previously been analyzed by electron microscopy, but owing to the thinness of this crystal form an X-ray crystal structure had not been determined. Here, the crystal structure of form III of BLC is presented in space group P212121, with unit-cell parameters a = 68.7, b = 173.7, c = 186.3 {angstrom}. The asymmetric unit is composed of the biological tetramer, which is packed in a tetrahedron motif with three other BLC tetramers. This higher resolution structure has allowed an assessment of the previously published electron-microscopy studies.

59 BASIC BIOLOGICAL SCIENCES↗

Power-Sharing between Grid-Forming and Grid-Following Inverters

Power-sharing between the grid-forming and the grid-following inverter in a small microgrid is a challenging task. Specifically, the decentralized droop-based power-sharing is difficult to achieve when the grid-forming inverter regulates the voltage and the frequency. This article proposes controllers for the grid-forming and the grid-following inverters, which ensure proportional power-sharing as well as regulate the voltage and the frequency. Both controllers use active power-frequency and reactive power-voltage droops. Additional secondary loops and secondary forward paths are added to the controller of the grid-forming inverter and the grid-following inverter, respectively, to ensure simultaneous voltage and frequency regulation and power-sharing. The efficacy of the proposed controllers for power-sharing is verified through experiment results in a multi-inverter testbed.

Sadeque, Fahmid↗

Operation and Control of a Back to Back Modular Multilevel Converter System for Grid Forming Application with Advanced Grid Support Functionalities

The main focus of this paper is to investigate the possibility of using modular multilevel converter based back-to-back system for grid forming applications. A decentralized hierarchical control architecture with a modified local controller based on nonlinear techniques for grid forming application have been investigated. Grid functionalities based on IEEE 1547-2018 for grid forming converters have been utilized. The local controllers ensure distortion free balanced sinusoidal output voltage on the grid forming side with unbalanced or nonlinear loading condition. The grid following side ensures unity power factor currents under unbalanced grid voltage condition. The dc bus voltage control ensures oscillation free voltage under balanced conditions and control of the average voltage under unbalanced condition. Efficacy of the overall system is verified by modeling the system in MATLAB/Simulink and PLECS domain and the most important case studies are presented.

advanced grid support functionalities↗

Positive-Sequence Phasor Modeling of Droop-Controlled, Grid-Forming Inverters with Fault Current Limiting Function

Traditional positive-sequence phasor models of droop-controlled, grid-forming inverters do not have the fault current limiting function. During a short-circuit fault the model generates unrealistic high fault current making the simulation results less practical. This paper develops a fault current limiting function for the positive-sequence phasor model of droop-controlled, grid-forming inverters, which can effectively limit the inverter output current at the predefined maximum during faults. A user-written model has been developed for the commercially-available software Siemens/PTI PSS/E. Fault studies on a modified IEEE 39-bus system with all grid-forming inverters verify the effectiveness of the developed fault current limiting function. The proposed model can be used to evaluate how the limited fault currents of droop-controlled, grid-forming inverters impact the bulk power system transient stability under fault conditions.

Du, Wei↗

Grid Forming Inverter: Laboratory-Scale Hardware Test Bed Setup and Weak Grid Operation

In recent times, the concept of grid forming inverters has gained popularity. Grid forming inverters have proven to be a promising alternative to the grid following inverters. In this paper, we present the hardware test bed implementation of grid forming inverter in islanding mode as well as in grid connected mode. The control structure includes inverter-level inner current control and outer voltage control, and plant-level P - f and Q - V droop control. The Q - V droop provides the voltage command, whereas P - f droop provides the frequency command and is also key for the synchronization process. While it is straightforward to set up the test bed for the islanded operation, it is a challenging process to set up the grid-forming inverter in the grid-connected mode. We present the key technologies and demonstrate the start-up process and weak grid operation using the hardware experiment results. Results from EMT model developed in MATLAB/SimPowerSystems are also presented for side-by-side comparison.

Mittal, Ratik↗

Seamless Transition of Critical Infrastructures using Droop Controlled Grid-forming Inverters

Seamless recovery of power to critical infrastructures, after grid failure, is a crucial need arising in scenarios that are increasingly becoming more frequent. Here, this article proposes a seamless transition strategy using a single and unified mode-dependent droop controlled grid-forming inverters. The control strategy achieves the following objectives: 1) regulates the output active and reactive power by the droop-controlled inverters to a desired value while operating in on-grid mode; 2) seamless transition and recovery of power injections into the load after grid failure by inverters that operates in grid-forming mode all the time; 3) requires only a single bit of information on the grid/network status for the mode transition. A framework for assessing the stability of the system and to guide the choice of parameters for controllers is developed using control-oriented modeling. A controller hardware-in-the-loop-based real-time simulation study on a test system based on the realistic electrical network of a commercial-scale medical center is conducted for initial prototyping of the control strategy. A hardware experiment is conducted with two 3 - $\phi$, 480 -V, 125 -kVA grid-forming inverters, a 3 - $\phi$, 480 -V, 270 -kVA grid simulator, a physical grid switch, and a physical load bank. The experimental data establishes the effectiveness of the always grid-forming operation and control of inverters in meeting power delivery objectives when on-grid and off-grid under various kinds of loads and scenarios while minimizing transients during transitions. Furthermore, performance comparison with existing strategies showcases the advantage of the proposed strategy.

24 POWER TRANSMISSION AND DISTRIBUTION↗