SEARCH · Engineering Papers
Results for “flows”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Volatility and Viscosity Are Correlated in Terpene Secondary Organic Aerosol Formed in a Flow Reactor
Secondary organic aerosol (SOA) is a complex mixture of largely unspeciated compounds. Volatility and viscosity of the bulk organic aerosol influence new particle formation, processing, and lifetime in the atmosphere. Relationships between these properties are well-defined for pure compounds, but currently unavailable for bulk organic aerosol. In this survey study, we characterized SOA formed from a range of biogenic precursors and conditions in an oxidation flow reactor for volatility (thermodenuder), viscosity (dimer coagulation, isolation, and coalescence), and oxidation state (aerosol chemical speciation monitor). We find linear trends in log-linear and log-log plots of single-parameter representations of volatility and viscosity, with higher condensed phase fractions of extremely low and low volatility material associated with increased viscosity (R=0.69). Per this relationship, a 10% increase in the contribution of these fractions (i.e., lower volatility) results in an increase in viscosity of approximately 200%. The viscosity (at 30°C) of SOA fell between $6.2 × 10^5$ to $8.0 × 10^8$ Pa s, and thus in the semi-solid range. SOA oxidation state ranged from -1.0 and 0.1, and was weakly anti-correlated with volatility (but not viscosity). We found larger SOA mass loadings generally associated with increased volatility and decreased viscosity. Overall, the results of this preliminary study are consistent with “molecular corridor”-style frameworks employing molecular mass and volatility to estimate viscosity to bulk real-world SOA.
Temperature Homogeneity under Selective and Localized Microwave Heating in Structured Flow Reactors
Selective heating of different phases of multiphase systems via microwaves can result in energy savings and suppression of side reactions. However, materials properties and operating conditions that maximize temperature gradients are poorly understood. Here we utilize computational fluid dynamics (CFD) computations and temperature measurements in structured flow reactors (monoliths) in a monomodal microwave cavity to assess the temperature difference between the walls and the fluid and develop a simple lumped model to estimate when temperature gradients exist. We also explore the material’s thermal and electrical properties of structured reactors for isothermal catalyst conditions. We propose that CFD simulations can be used as a nonintrusive, predictive tool of temperature homogeneity. Importantly, we demonstrate that localized heating in the bed under several conditions rather than selective heating is responsible for the selectivity enhancement. Furthermore, our results indicate that structured beds made of high thermal conductivity materials avoid arcing and enable temperature homogeneity and low electrical conductivity materials allow microwaves to penetrate the domain.
Pilot-Scale Continuous Plug-Flow Hydrothermal Liquefaction of Food Waste for Biocrude Production
Pilot-scale hydrothermal liquefaction (HTL) of biowaste is a critical step toward commercialization of the HTL technology. Despite many HTL studies conducted with wet biomass, including food waste, few were performed with a pilot-scale continuous plug-flow reactor (PFR), with the biocrude yield and quality analysis based on dewatering (ASTM D2892 Annex X1). This paper describes the development and performance evaluation of a mobile pilot-scale HTL continuous PFR, with a processing capacity of 60 L/h of wet feedstock and 6 L/h of biocrude production. The reactor system was designed for reaction conditions of up to 325 °C and 17.25 MPa. The reactor has a volume of 28.88 L with an additional counterflow heat exchanger volume of 18.07 L. Two types of food wastes, from a food processing plant and grocery store, were processed at 280 °C for 30 min, producing biocrude oil yields of 52.19 and 47.06 wt %, energy recoveries of 68.17 and 70.77%, and carbon recoveries of 66.91 and 64.78%, respectively. Furthermore, due to its high feedstock capacity and reaction volume, large amounts of biocrude oil and post-HTL wastewater (PHW) were obtained from this pilot-scale reactor to allow downstream research on upgrading biocrude oil for transportation fuel as well as PHW treatment and nutrient recovery.
Flow and extraction of energy and charge carriers in hybrid plasmonic nanostructures
Strong interactions of electromagnetic fields with plasmonic nanomaterials have been exploited in various applications. These applications have centred on plasmon-enhanced scattering rates in nearby molecules or plasmon-induced heating. A question that has emerged recently is whether it is possible to use plasmonic nanostructures in a range of hot electron (hole) applications, including photocatalysis, photovoltaics and photodetection. These applications require coupling of a plasmonic component, which amplifies the interaction of light with the material, to an attached non-plasmonic component that extracts this energy in the form of electronic excitations to perform a function. Here, in this Perspective, we discuss recent work in the emerging field of hybrid plasmonics. We focus on fundamental questions related to the nanoscopic flow of energy and excited charge carriers in these multicomponent materials. We also address critical misconceptions, challenges and opportunities that require more attention.
Non-scaling behavior of electroosmotic flow in voltage-gated nanopores
Ionic size effects and electrostatic correlations result in the non-monotonic dependence of the electrical conductivity on the pore size. For ion transport at a high gating voltage, the conductivity oscillates with the pore size due to a significant overlap of the electric double layers.
Methanesulfonic acid-based electrode-decoupled vanadium–cerium redox flow battery exhibits significantly improved capacity and cycle life
V–Ce RFBs (∼100% CE and ∼70% EE over 100 cycles) using a CH 3 SO 3 H-based electrolyte and a AEM separator shows 30% higher capacity and 0.024% capacity fade/cycle vs. 5% capacity fade/cycle for H 2 SO 4 supported V–Ce ED-RFBs.
Selected-ion flow tube temperature-dependent measurements for the reactions of O{sub 2}{sup +} with N atoms and N{sub 2}{sup +} with O atoms
The temperature variation of rate constants has been measured for the gas phase reactions of the oxycation O{sub 2}{sup +} with N atoms and of N{sub 2}{sup +} with O atoms from 120 to 400 K using a variable temperature-selected ion flow tube. Measured room temperature rate constants, 0.75 × 10{sup −10} cm{sup 3} s{sup −1} (±30%) for O{sub 2}{sup +} with N and 1.4 × 10{sup −10} cm{sup 3} s{sup −1} (±30%) for N{sub 2}{sup +} with O, are in agreement with previously reported values. A temperature dependence of T{sup −0.7(±0.3)} is observed for the O{sub 2}{sup +} + N reaction; however, the N{sub 2}{sup +} + O reaction is found to be independent of temperature. Calculations at varying levels of theory were used in tandem with experiments to evaluate likely pathways in potential energy surfaces for the reactions of concern.
System overview and characterization of a high-temperature, high-pressure, entrained-flow, laboratory-scale gasifier
The high-temperature, high-pressure, entrained-flow, laboratory-scale gasifier at the Colorado School of Mines, including the primary systems and the supporting subsystems, is presented. The gasifier is capable of operating at temperatures and pressures up to 1650 °C and 40 bar. The heated section of the reactor column has an inner diameter of 50 mm and is 1 m long. Solid organic feedstock (e.g., coal, biomass, and solid waste) is ground into batches with particle sizes ranging from 25 to 90 μm and is delivered to the reactor at feed rates of 2–20 g/min. The maximum useful power output of the syngas is 10 kW, with a nominal power output of 1.2 kW. The initial characterization and demonstration results of the gasifier system with a coal feedstock are also reported.
Communication: State-to-state dynamics of the Cl + H{sub 2}O → HCl + OH reaction: Energy flow into reaction coordinate and transition-state control of product energy disposal
Quantum state-to-state dynamics of a prototypical four-atom reaction, namely, Cl + H{sub 2}O → HCl + OH, is investigated for the first time in full dimensionality using a transition-state wave packet method. The state-to-state reactivity and its dependence on the reactant internal excitations are analyzed and found to share many similarities both energetically and dynamically with the H + H{sub 2}O → H{sub 2} + OH reaction. The strong enhancement of reactivity by the H{sub 2}O stretching vibrational excitations in both reactions is attributed to the favorable energy flow into the reaction coordinate near the transition state. On the other hand, the insensitivity of the product state distributions with regard to reactant internal excitation stems apparently from the transition-state control of product energy disposal.
Numerical simulations of optically thick accretion onto a black hole. II. Rotating flow
In this paper, we report on recent upgrades to our general relativistic radiation magnetohydrodynamics code, Cosmos++, including the development of a new primitive inversion scheme and a hybrid implicit-explicit solver with a more general M {sub 1} closure relation for the radiation equations. The new hybrid solver helps stabilize the treatment of the radiation source terms, while the new closure allows for a much broader range of optical depths to be considered. These changes allow us to expand by orders of magnitude the range of temperatures, opacities, and mass accretion rates, and move a step closer toward our goal of performing global simulations of radiation-pressure-dominated black hole accretion disks. In this work, we test and validate the new method against an array of problems. We also demonstrate its ability to handle super-Eddington, quasi-spherical accretion. Even with just a single proof-of-principle simulation, we already see tantalizing hints of the interesting phenomenology associated with the coupling of radiation and gas in super-Eddington accretion flows.
Effect of plasma on gas flow and air concentration in the effluent of a pulsed cold atmospheric pressure helium plasma jet
In this work, we report on the flow effects induced by a nanosecond pulsed helium cold atmospheric pressure plasma jet impinging on a glass substrate. Herein, gas temperature measurements have been performed using optical emission spectroscopy including rotational spectra of OH(A-X) (0,0) and N 2 (C-B) (0,0) and resonance broadening of a helium emission line at 667.8 nm. The measured increase in gas temperature was less than 15 K. We have measured the air concentration distribution in the jet effluent by means of Rayleigh scattering exploiting the large difference in Rayleigh cross-section of air and helium. The obtained results show that the plasma causes a broadening of the helium channel suggesting an enhanced gas velocity and mixing with the ambient air. The impact of the plasma on the jet effluent is polarity dependent and is larger in the case of positive applied voltage pulses. Using an estimation of the increased gas velocity required to obtain the observed air concentrations, we have shown that both gas heating and electrohydrodynamic (EHD) forces related to the propagation of an ionization front are not causing the observed phenomena. The surface charge which can exist for a much longer time than the duration of the applied voltage pulse is the primary cause of the EHD forces on the bulk charges which lead to significant different air concentration profiles in the jet effluent for plasma on and off.
Anisotropic fluid dynamics for Gubser flow
Investigating a variety of closing schemes to the infinite hierarchy of momentum moments of the exactly solvable Boltzmann equation for systems undergoing Gubser flow, we study the precision with which the resulting hydrodynamic equations reproduce the exact evolution of hydrodynamic moments of the distribution function. We find that anisotropic hydrodynamics, obtained by expanding the distribution function around a dynamically evolving locally anisotropic background whose evolution is matched to exactly reproduce the macroscopic pressure anisotropy caused by the different longitudinal and transverse expansion rates in Gubser ow, provides the most accurate macroscopic description of the microscopic kinetic evolution. This confirms a similar earlier finding for Bjorken ow [Molnar, Niemi and Rischke, Phys. Rev. D 94, 125003 (2016)]. Also, we explain the physics behind this optimal matching procedure and show that one can efficiently correct for a nonoptimized matching choice by adding a residual shear stress to the energy-momentum tensor whose evolution is again determined by the Boltzmann equation. Further insights to guide the optimal choice of a macroscopic anisotropic hydrodynamic framework for strongly-coupled systems that do not admit a microscopic kinetic description are reported.
Measurement of color flow in t t ¯ events from p p ¯ collisions at s = 1.96 TeV
Not Available
Lines of Fisher’s zeros as separatrices for complex renormalization group flows
Not Available