Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “extrapolation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

A review of preflight estimates of real-gas effects on space shuttle aerodynamic characteristics

Preflight estimates of the hypersonic aerodynamic characteristics of the Shuttle orbiter were based on a diverse series of research studies using state of the art techniques developed by basic research in the 60's and 70's. Real-gas viscous calculations on simple shapes that were used to evaluate correlation parameters indicated that real-gas effects reduce aerodynamic forces and moments. Inviscid calculations on winged lifting shapes indicated reduced forces and a slight nose-up pitch resulted because of real-gas effects. Analysis of the extensive wind tunnel data base indicated viscous correlation parameters provided the most appropriate extrapolation technique for estimating flight aerodynamics. Variations because of changes in the ratio of specific heats, which was the only available experimental tool for evaluating real-gas effects, indicated that reduced loads and nose-up pitching moments would occur at high altitudes and Mach numbers but that the values would not exceed the tolerances and variations established about the aerodynamic design data book values derived from viscous correlations. During STS-1, nose-up pitching moments exceeded the established variations.

Woods, W. C.↗
NASA NTRS1983

Explanation of the hypersonic longitudinal stability problem: Lessons learned

Inviscid and viscous CFD codes have been applied to a modified Space Shuttle orbiter geometry to investigate differences between preflight aerodynamic predictions and aerodynamic data from hypersonic reentry flight. Flow field solutions were obtained for wind tunnel conditions and flight conditions to assess Mach number, real-gas, and viscous effects on the reentry aerodynamics of the orbiter. Based on the CFD studies, a methodology model has been developed to (1) extrapolate wind tunnel data to flight conditions and (2) calculate a DCM for use with the Aerodynamic Design Data Book. Comparisons are made with selected flight data. Results of the study indicate that the differences between flight and pre-STS-1 predictions of hypersonic pitching moment are primarily due the to Mach number and real-gas effects.

Griffith, B. J.↗
NASA NTRS1983

Flight test derived heating math models for critical locations on the orbiter during reentry

An analysis technique was developed for expanding the aerothermodynamic envelope of the Space Shuttle without subjecting the vehicle to sustained flight at more stressing heating conditions. A transient analysis program was developed to take advantage of the transient maneuvers that were flown as part of this analysis technique. Heat rates were derived from flight test data for various locations on the orbiter. The flight derived heat rates were used to update heating models based on predicted data. Future missions were then analyzed based on these flight adjusted models. A technique for comparing flight and predicted heating rate data and the extrapolation of the data to predict the aerothermodynamic environment of future missions is presented.

Hertzler, E. K.↗
NASA NTRS1983

Leeward centerline and side fuselage entry heating predictions for the space shuttle orbiter

Heat transfer data measured along the leeward centerline and on the side fuselage of the Space Shuttle orbiter during STS-2 and STS-3 are compared with predictions of empirical heating techniques derived from wind tunnel tests. Steps required to extrapolate an existing leeward centerline theory to flight conditions are described. Generally favorable comparisons from Mach 24 down to approximately Mach 7 for both flights are presented. The side fuselage impingement heating method is currently under development, but some preliminary results are available. The method is briefly described and compared with wind tunnel and flight measurements. Side heating predictions are given for an STS-3 trajectory point near Mach 10 showing good agreement with flight data. There is evidence of embedded vortices emanating from the side fuselage impingement line which significantly enhance local heating rates at both wind tunnel and flight conditions.

Helms, V. T., III↗
NASA NTRS1983

A comparison of measured and theoretical predictions for STS ascent and entry sonic booms

Sonic boom measurements have been obtained during the flights of STS-1 through 5. During STS-1, 2, and 4, entry sonic boom measurements were obtained and ascent measurements were made on STS-5. The objectives of this measurement program were (1) to define the sonic boom characteristics of the Space Transportation System (STS), (2) provide a realistic assessment of the validity of xisting theoretical prediction techniques, and (3) establish a level of confidence for predicting future STS configuration sonic boom environments. Detail evaluation and reporting of the results of this program are in progress. This paper will address only the significant results, mainly those data obtained during the entry of STS-1 at Edwards Air Force Base (EAFB), and the ascent of STS-5 from Kennedy Space Center (KSC). The theoretical prediction technique employed in this analysis is the so called Thomas Program. This prediction technique is a semi-empirical method that required definition of the near field signatures, detailed trajectory characteristics, and the prevailing meteorological characteristics as an input. This analytical procedure then extrapolates the near field signatures from the flight altitude to an altitude consistent with each measurement location.

Garcia, F., Jr.↗
NASA NTRS1983

A computer program for estimating the aerodynamic characteristics of NACA 16-series airfoils

A computer program written in a table ""look-up'' format, is presented which provides a comprehensive data base on NACA 16-series airfoils. The geometry covered is limited to cambers for a design-lift coefficient from 0.0 to 0.7 and thickness ratios from 4 to 21%. The data include Mach numbers from 0.3 to 1.6, angles of attack from -4 to 8 degrees, and lift coefficients from 0.0 to 0.8. Extrapolation is used to obtain data from Mach numbers, angles of attack, and lift coefficients beyond those for which data are available. A routine to adjust the lift and drag coefficients beyond stall is included. The uses and limitations of the program are also discussed.

Maksymiuk, C. M.↗
NASA NTRS1983

Theory of interstellar medium diagnostics

The theoretical interpretation of observed interplanetary resonance luminescence patterns is used as one of the must promising methods to determine the state of the local interstellar medium (LISM). However, these methods lead to discrepant results that would be hard to understand in the framework of any physical LISM scenario. Assuming that the observational data are reliable, two possibilities which could help to resolve these discrepancies are discussed: (1) the current modeling of resonance luminescence patterns is unsatisfactory and has to be improved, and (2) the extrapolated interstellar parameters are not indicative of the unperturbed LISM state, but rather designate an intermediate state attained in the outer regions of the solar system. It is shown that a quantitative treatment of the neutral gas-plasma interaction effects in the interface between the heliospheric and the interstellar plasmas is of major importance for the correct understanding of the whole complex.

Fahr, H. J.↗
NASA NTRS1983

Initial experimental results from a laboratory size beam plasma discharge device

A laboratory beam plasma discharge (BPD) device produced BPD in N2, A, and He. All features of the BPD observed in the device agree with those observed in a large vacuum chamber. The empirical ignition criteria determined in the large chamber apply in the small device but do not fit when used for extrapolation between the large and the small geometry. At some energies and magnetic fields beam currents exist for which the total light output in the BPD state varies by a factor of 2 with a factor of 6 pressure variation. Above 0.0001 torr the BPD width is pressure independent but for lower pressures it expands by as much as a factor of 4 at 0.00002 torr.

Konradi, A.↗
NASA NTRS1983

A helium-3 refrigerator employing capillary confinement of liquid cryogen

A condensation refrigerator suitable for operation in a zero gravity space environment was constructed. The condensed liquid refrigerant is confined by surface tension inside a porous metal matrix. Helium-4 and helium-3 gases were condensed and held in a copper matrix. Evaporative cooling of confined liquid helium-4 resulted in a temperature of 1.4K. Using a zeolite adsorption pump external to the cryostat, a temperature of 0.6 K was achieved through evaporative cooling of liquid helium-3. The amount of time required for complete evaporation of a controlled mass of liquid helium-4 contained in the copper matrix was measured as a function of the applied background power. For heating powers below 18 mW the measured times are consistent with the normal boiling of the confined volume of liquid refrigerant. At background powers above 18 mW the rapid rise in the temperature of the copper matrix the signature of the absence of confined liquid occurs in a time a factor of two shorter than that expected on the basis of an extrapolation of the low power data.

Ennis, D. J.↗
NASA NTRS1984

Improved finite-difference vibration analysis of pretwisted, tapered beams

An improved finite difference procedure based upon second order central differences is developed. Several difficulties encountered in earlier works with fictitious stations that arise in using second order central differences, are eliminated by developing certain recursive relations. The need for forward or backward differences at the beam boundaries or other similar procedures is eliminated in the present theory. By using this improved theory, the vibration characteristics of pretwisted and tapered blades are calculated. Results of the second order theory are compared with published theoretical and experimental results and are found to be in good agreement. The present method generally produces close lower bound solutions and shows fast convergence. Thus, extrapolation procedures that are customary with first order finite-difference methods are unnecessary. Furthermore, the computational time and effort needed for this improved method are almost the same as required for the conventional first order finite-difference approach.

Subrahmanyam, K. B.↗
NASA NTRS1984

Effect of creep in titanium alloy Ti-6Al-4V at elevated temperature on aircraft design and flight test

Short-term compressive creep tests were conducted on three titanium alloy Ti-6Al-4V coupons at three different stress levels at a temperature of 714 K (825 F). The test data were compared to several creep laws developed from tensile creep tests of available literature. The short-term creep test data did not correlate well with any of the creep laws obtained from available literature. The creep laws themselves did not correlate well with each other. Short-term creep does not appear to be very predictable for titanium alloy Ti-6Al-4V. Aircraft events that result in extreme, but short-term temperature and stress excursions for this alloy should be approached cautiously. Extrapolations of test data and creep laws suggest a convergence toward predictability in the longer-term situation.

Jenkins, J. M.↗
NASA NTRS1982

Influence of deformation behavior, oxydation, and temperature on the long time cyclic stress behavior of high temperature steels

The influence of different parameters on the creep-fatigue behavior of several steel alloys was investigated. The higher the temperature the lower the crack initiation value. Pauses during the cycle reduce the damage. Oxidation reduces and protective gas increases the lifetime. Prior loading and prior deformation reduce the lifetime. Short annealing slightly affects the cycle stress behavior. The test results do not satisfactorily agree with methods of extrapolation and damage accumulation.

Maile, K.↗
NASA NTRS1984

Creep-rupture reliability analysis

A probabilistic approach to the correlation and extrapolation of creep-rupture data is presented. Time temperature parameters (TTP) are used to correlate the data, and an analytical expression for the master curve is developed. The expression provides a simple model for the statistical distribution of strength and fits neatly into a probabilistic design format. The analysis focuses on the Larson-Miller and on the Manson-Haferd parameters, but it can be applied to any of the TTP's. A method is developed for evaluating material dependent constants for TTP's. It is shown that optimized constants can provide a significant improvement in the correlation of the data, thereby reducing modelling error. Attempts were made to quantify the performance of the proposed method in predicting long term behavior. Uncertainty in predicting long term behavior from short term tests was derived for several sets of data. Examples are presented which illustrate the theory and demonstrate the application of state of the art reliability methods to the design of components under creep.

Peralta-Duran, A.↗
NASA NTRS1984

Impact of Upheaval Dome, Utah

Reexamination of Upheaval Dome in the Canyonlands National Park, Utah, shows that the structure of this remarkable feature conforms with that expected for a deeply eroded astrobleme. The structure is definitely not compatible with an origin due simply to plastic flowage of salt and other rocks in the underlying Paradox Formation. The most strongly deformed rocks are bounded by a series of circumferential listric faults. The convergent displacement of the rocks corresponds to the deformation that results from collapse of a transient cavity produced by high speed impact. From considerations of the probable depth of exposure of the impact structure and upward extrapolation of the listric faults, the final collapsed crater is estimated to be about 8 to 10 km in diameter; the impacting body was on the order of 0.5 km in diameter.

Shoemaker, E. M.↗
NASA NTRS1984

Development of baseline random vibration environment criteria for Shuttle pallet payload subsystems

This paper presents a statistical evaluation of measured random vibration response data obtained from the Office of Space Science-1 (OSS-1) pallet payload. The data were measured during the acoustic test simulation (September 1980) and the ascent phase of the flight of STS-3, Orbiter 102 (launched from the Kennedy Space Center on March 22, 1982). Acoustic test efficiency factors are evaluated based on the Dynamic, Acoustic and Thermal Environments (DATE) instrumentation as the source of the measured vibration data. Test efficiency correction to test data is applied in the extrapolation of non-DATE acoustic test data to increase sample population size for improved statistical evaluation. For baseline criteria evaluation and development, data are grouped in accordance with the payload zone in which the component is mounted.

On, F. J.↗
NASA NTRS1984

Shuttle flight data analysis

As the STS moves into routine operations, the direction of the work is shifting to an in-depth assessment of performance and its impact on the design and development of a future generation of vehicles. Particular emphasis is placed on providing an accurate physical explanation of anomalies, assessing the quality of simulation provided by the ground test facilities utilized, understanding the ground to flight extrapolation procedures, and the limitations of theoretical prediction techniques. The results are expected to provide direction and focus for future research and technology programs to enable substantial technological improvements in the next generation vehicles. The recent approval of the Orbital Experiments (OEX) Program's Shuttle Infrared Leeside Temperature Sensing (SILTS), Shuttle Entry Air Data System (SEADS), and Shuttle Upper Atmospheric Mass Spectrometer (SUMS) experiments to be integrated for flight on OV-102 in late 1985 is a firm indication of a strong commitment to a continuing and vigorous program in shuttle flight data analysis.

Walberg, G. D.↗
NASA NTRS1984

Space structure vibration modes: How many exist? Which ones are important?

This report attempts to shed some light on the two issues raised in the title, namely, how many vibration modes does a real structure have, and which of these modes are important? The surprise-free answers to these two questions are, respectively, an infinite number and the first several modes. The author argues that the absurd subspace (all but the first billion modes) is not a strength of continuum modeling, but, in fact, a weakness. Partial differential equations are not real structures, only mathematical models. This note also explains (1) that the PDE model and the finite element model are, in fact, the same model, the latter being a numerical method for dealing with the former, (2) that modes may be selected on dynamical grounds other than frequency alone, and (3) that long slender rods are useful as primitive cases but dangerous to extrapolate from.

Hughes, P. C.↗