SEARCH · Engineering Papers
Results for “evaluation study”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Nitrogen dynamics and physiological N use efficiency in high‐biomass sorghum
Improving nitrogen (N) efficiency is essential for sustainable high-biomass sorghum ( Sorghum bicolor L. Moench) production. This study evaluated leaf and stem N dynamics, canopy N remobilization, and physiological nitrogen use efficiency (pNUE) in two photoperiod-sensitive sorghum hybrids under two N rates (0 and 168 kg-N ha −1 ) across multiple environments in Texas and Illinois. Leaf N concentrations increased with plant height in the canopy with steeper gradients under low-N conditions, indicating enhanced N remobilization when N is limited. Stem tissue showed less variation in N concentration across canopy nodal positions, with within-plant differences ranging from 1.2 to 7.6 g kg −1 , compared to 3.1 to 16.3 g kg −1 in leaves. While pNUE was generally higher under unfertilized conditions, it varied largely by site; however, genotypic differences were minimal within the given year. These results highlight the importance of integrating environmental and management factors into breeding and fertilization strategies to enhance N efficiency in high-biomass sorghum.
Battery Electrolyte Design for Electric Vertical Takeoff and Landing (eVTOL) Platforms
Here, the development of robust and high-performance battery systems is crucial for the advancement of Electric Vertical Takeoff and Landing (eVTOL) vehicles for urban air mobility. This study evaluates the performance of different lithium-ion battery chemistries under Electric Vertical Takeoff and Landing (eVTOL) load profiles. The actual flight data coupled with physical models is used to create discharge profiles for testing on developed lithium-ion cells for eVTOLs. The performance of a standard liquid electrolyte (1.2 M LiPF 6 in EC:EMC), labeled Gen-2, is benchmarked and compared with a fast-charging electrolyte (1.2 M LiFSI in EC:EMC), labeled XFC. Cell analysis involves the use of various techniques, such as impedance spectroscopy, polarization curves, and capacity retention measurements. Capacity retention is stable for both systems over 500 cycles, but unique discharge capacity trends are observed for different mission segments. During the initial takeoff hover stages, Gen-2 electrolytes experience substantial voltage fade, while XFC electrolytes maintain consistent behavior. In general, the Gen-2 electrolyte demonstrated lower discharge overpotentials and higher decay during cycling compared to the XFC electrolyte. This work highlights the complexity of eVTOL battery behavior and provides insights into battery system design, contributing to the advancement of battery energy storage solutions for urban air mobility.
Electrochemically recovered struvite matches conventional fertilizers in soil nutrient supply
Phosphorus (P) is an essential macronutrient for agriculture, yet global reliance on finite phosphorite reserves raises concerns about long-term food and nutrient security. Struvite (MgNH 4 PO 4 ·6H 2 O), a mineral recovered from municipal wastewater, represents a sustainable and circular source of P, but uncertainty remains regarding its nutrient availability relative to conventional fertilizers. This study evaluated the fertilizer value and environmental safety of electrochemically recovered struvite (RecoP) in comparison with diammonium phosphate (DAP), triple superphosphate (TSP), and rock phosphate (RockP). Nutrient availability, potential contaminant concentrations, and soil P and nitrogen (N) dynamics were assessed using standardized chemical analyses and an 8-week incubation experiment across three soils with contrasting soil types. RecoP contained 14.7% citrate-soluble P, significantly greater than RockP and comparable to DAP and TSP. Across all soils, RecoP increased both readily available and moderately labile P pools (p < 0.01), matching the performance of conventional fast-release fertilizers. Despite containing approximately half the total of DAP, RecoP stimulated nitrification rates that were 2.2 times greater than the control and exceeded those of TSP, suggesting that fertilizer-derived N bioavailability, rather than total N loading, governed microbial N transformation responses. Concentrations of potentially toxic elements in RecoP were consistently well below US Environmental Protection Agency regulatory limits thresholds. Collectively, these results indicate that RecoP functions as a readily available source of both P and N, comparable to widely used conventional fertilizers, while meeting environmental safety standards. RecoP therefore represents a viable component of sustainable nutrient management strategies that support P recycling and agricultural productivity.
A trimethylamine–carbon dioxide draw solution for osmotic engines
This study evaluates the pressure retarded osmosis performance of TMA–CO 2 for potential use in osmotic heat engines. Power densities up to 18.6 W m −2 were achievable at relatively low pressure (10 bar) using 5 M TMA–CO 2 draw solutions. Compared to NaCl control tests, the TMA–CO 2 exhibited 20% lower water flux due in large part to its larger molecular size and associated higher solution viscosity and lower diffusion coefficient. Compared to the ammonia‐carbon dioxide draw solution, water flux was comparable but reverse solute flux of TMA–CO 2 was nearly one order of magnitude lower. Larger solute size was found to create a performance tradeoff as reduced reverse solute flux improved water flux while higher viscosity and lower diffusion coefficient worsened water flux. © 2018 American Institute of Chemical Engineers AIChE J , 64: 3369–3375, 2018
Life-cycle greenhouse gas emissions reduction potential for corn ethanol refining in the USA
This study evaluates how low-carbon production technologies applicable to ethanol plants may reduce the life-cycle greenhouse gas emission (GHG) intensities of corn ethanol production in the USA. Results indicate that options focusing on incremental energy efficiency (e.g., combined heat and power) and yield improvements have a limited impact on GHG reductions. To achieve deep decarbonization (>50% GHG reduction compared to current corn ethanol production), a fuel switch from natural gas (NG) to alternative low-carbon fuels is needed. Replacing 50% of NG demand at ethanol plants with syngas from biomass through gasification or renewable natural gas from animal waste could achieve significant GHG reductions (11.7–23.5 g CO 2 e/MJ ethanol). Adding multiple technologies, including carbon capture and storage, to existing ethanol plants may further reduce GHG emissions to –18.4 g CO 2 e MJ –1 ethanol (including land-use change emissions), which is 120% lower than the carbon intensity of pure gasoline. These results could inform how the ethanol industry could move toward net-zero ethanol production.
Carbon‐negative hydrogen from ethanol via catalytic oxidative reforming
Abstract This study evaluated a commercial technology for producing low‐ or negative‐carbon hydrogen through ethanol catalytic oxidative reforming, focusing on the life cycle greenhouse gas emissions, or carbon intensity (CI). Various scenarios were analyzed: (a) comparing corn ethanol (first‐generation or Gen1 ethanol) and cellulosic ethanol (second‐generation or Gen2 ethanol) as feedstocks; (b) assessing carbon capture and sequestration (CCS) for CO 2 from upstream fermentation; and (c) evaluating oxygen sourcing via air separation units vs. on‐site or off‐site water electrolysis using a proton exchange membrane. Findings indicate that the CI for hydrogen production using Gen2 ethanol from corn stover is lower than that of Gen1 corn ethanol. Additionally, using proton exchange membrane‐generated oxygen results in a lower CI than air separation unit‐generated oxygen, regardless of the sourcing method. Implementing CCS for the hydrogen production plant's evolved CO 2 is essential for achieving a net‐negative CI for hydrogen from Gen1 ethanol. All examined scenarios, including both ethanol generations, oxygen sources, and CCS applications, demonstrated a net‐negative carbon intensity, surpassing the life cycle greenhouse gas emissions threshold of 0.45 kg CO 2 e/kg to enable policy credits as outlined in the Inflation Reduction Act §45V. In comparison, the CI for hydrogen from steam methane reforming stands at 3.4 kg CO 2 e/kg with CCS and 9.4 kg CO 2 e/kg without CCS.
Seasonal and flow-driven dynamics of particulate and dissolved mercury and methylmercury in a stream impacted by an industrial mercury source
Abstract Sediments and floodplain soils in the East Fork Poplar Creek watershed (Oak Ridge, TN, USA) are contaminated with high levels of mercury (Hg) from an industrial source at the headwaters. Although baseflow conditions have been monitored, concentrations of Hg and methylmercury (MeHg) during high-flow storm events, when the stream is more hydrologically connected to the floodplain, have yet to be assessed. The present study evaluated baseflow and event-driven Hg and MeHg dynamics in East Fork Poplar Creek, 5 km upstream of the confluence with Poplar Creek, to determine the importance of hydrology to in-stream concentrations and downstream loads and to ascertain whether the dynamics are comparable to those of systems without an industrial Hg source. Particulate Hg and MeHg were positively correlated with discharge (r2 = 0.64 and 0.58, respectively) and total suspended sediment (r2 = 0.97 and 0.89, respectively), and dissolved Hg also increased with increasing flow (r2 = 0.18) and was associated with increases in dissolved organic carbon (r2 = 0.65), similar to the dynamics observed in uncontaminated systems. Dissolved MeHg decreased with increases in discharge (r2 = 0.23) and was not related to dissolved organic carbon concentrations (p = 0.56), dynamics comparable to relatively uncontaminated watersheds with a small percentage of wetlands (<10%). Although stormflows exert a dominant control on particulate Hg, particulate MeHg, and dissolved Hg concentrations and loads, baseflows were associated with the highest dissolved MeHg concentration (0.38 ng/L) and represented the majority of the annual dissolved MeHg load. Environ Toxicol Chem 2016;35:1386–1400. Published 2015 Wiley Periodicals, Inc. on behalf of SETAC. This article is a US Government work, and as such, is in the public domain in the United States of America.
Conservative solute transport processes and associated transient storage mechanisms: Comparing streams with contrasting channel morphologies, land use and land cover
Abstract Land use within a watershed impacts stream channel morphology and hydrology and, therefore, in‐stream solute transport processes and associated transient storage mechanisms. This study evaluated transport processes in two contrasting stream sites where channel morphology was influenced by the surrounding land use, land cover, climate and geologic controls: Como Creek, CO, a relatively undisturbed, high gradient, forested stream with a gravel bed and complex channel morphology, and Clear Creek, IA, an incised, low‐gradient stream with low‐permeability substrate draining an agricultural landscape. We performed conservative stream tracer injections at these sites to address the following questions: (1) How does solute transport vary between streams with differing morphologies? and (2) How does solute transport at each stream site change as a function of discharge? We analysed in‐stream tracer time series data and compared results quantifying solute attenuation in surface and subsurface transient storage zones. Significant trends were observed in these metrics with varying discharge conditions at the forested site but not at the agricultural site. There was a broad range of transport mechanisms and evidence of substantial exchange with both surface and hyporheic transient storage in the relatively undisturbed, forested stream. Changing discharge conditions activated or deactivated different solute transport mechanisms in the forested site and greatly impacted advective travel time. Conversely in the simplified agricultural stream, there was a narrow range of solute transport behaviour across flows and predominantly surface transient storage at all measured discharge conditions. These results demonstrate how channel simplification inhibits available solute transport mechanisms across varying discharge conditions.
Temporal Patterns in Soil Redox Potential Vary Across a Freshwater Coastal Delta
Widespread and persistent flooding is submerging coastal ecosystems, particularly along the Louisiana Gulf coast, where flooding results from the compounding effects of ground subsidence and rising sea level. Restoration projects aim to mitigate land loss by diverting sediment loads from rivers into degraded areas to increase ground elevation. To predict how coastal ecosystems will change over time in response to projected changes in relative sea level and restoration, it is necessary to understand how subsurface biogeochemical processes respond to dynamic hydrologic forcings. Here, this study evaluates how environmental parameters that integrate biogeochemical processes vary with water table fluctuations in the freshwater Wax Lake Delta (WLD) in Louisiana, USA, where water diversions have formed one of the only active deltas along the coast. High‐frequency observations of water level, soil redox potential, specific conductance and pH were made for 1 year along elevation transects located on the older, proximal and younger, distal ends of a deltaic island. Redox responded rapidly to changing water tables, with fluctuations occurring primarily in shallow soils (< 20 cm) and at higher elevations. Deeper soils and those at lower elevation remained inundated and reduced. Semi‐diurnal tidal fluctuations were pronounced in younger, distal soils, presumably due to rapid groundwater exchange with the river channel. Tidal signals were muted in older soils that instead exhibited seasonal variability associated with river discharge and evapotranspiration. Although much of the delta sediments are persistently reducing and anoxic, redox fluctuations in the natural levees that border the deltaic islands likely drive high rates of biogeochemical activity. Evaluating how hydrology drives the frequency and duration of redox fluctuations provides a basis for understanding how biogeochemical processes might vary with complex hydrological interactions in coastal systems.
Southwest Pacific tropical cyclone development classification utilizing machine learning and synoptic composites
This study evaluates the ability of machine learning algorithms to classify tropical depressions (TDs) and tropical storms (TSs) in the western region of the southwest Pacific Ocean (SWPO). Decision rules are generated to predict the environment required for a depression to fully develop into a mature storm, and the most influential predictors in the classification decision are ranked. TD and TS are discriminated based on a maximum sustained wind speed threshold (≥17 ms -1 ). Various aerosol, thermodynamic, and dynamic parameters are extracted closest to the initiation point of each non-developing and developing sample. The covariates associated with each labelled sample are used to train a decision tree and random forest model. Results using a testing dataset suggest the random forest approach more accurately distinguishes between non-developing and developing samples. The classification accuracy of the decision tree and random forest are 72% and 91%, respectively. Random forest outperformed the decision tree by providing higher accuracy in test data. The most important variables for binary classification are sea salt aerosol optical depth (AOD), 1,000 mb relative humidity, and sea surface temperature. AOD is a quantitative estimate of the aerosols presents in the air through the extinction of a ray of light as it passes through the atmosphere. Mean composite maps constructed in an unsupervised manner have been created for the most important variables identified by the random forest classifier during TD and TS events to highlight the difference in geophysical and aerosol variables' climatology during the two different classifications. This work will advance the risk management strategies for northeastern Australia and other SWPO basin islands to control their tropical cyclone related losses through prioritizing forecasting variables that are the strongest predictors of the strengthening of tropical depressions into tropical cyclones.
Ionic Liquid Aided [ 11 C]CO Fixation for Synthesis of 11 C‐carbonyls
Tributyl(ethyl)phosphonium oxopentenolate ([P 4442 ][Pen]) is an ionic liquid developed to capture CO and has shown ability to catalyze carbonylation reactions in organic chemistry. Carbon-11 ( 11 C, t 1/2 =20.4 min) labeled CO is a highly versatile building block for the synthesis of positron emission tomography (PET) radiotracers that are applied for medical imaging. The use of [ 11 C]CO is limited by its low solubility in organic solvents. Herein, we report a proof-of-concept study evaluating a new method to prepare 11 C-labeled amides, ureas and carbamates via reaction of [ 11 C]CO in [P 4442 ][Pen] and applied for fully automated radiosyntheses of Bruton's tyrosine kinase inhibitors, [ 11 C]evobrutinib and [ 11 C]ibrutinib.
Enhanced Interfacial Strength in Carbon Fiber Composites via Mussel‐Inspired Sizing Polymers
Composite materials possess a high strength-to-weight ratio. A key determinant of their mechanical performance is the interfacial strength between the fibers and the matrix. Sizing agents are commonly used to improve this interface by promoting better adhesion, though optimizing this interaction remains a significant challenge. Here, this study evaluates the use of poly(catechol-styrene) (PCS), a mussel-inspired sizing agent, to enhance fiber–matrix bonding in carbon fiber composites. Woven carbon fiber laminates were dip-coated with varying concentrations of PCS (0.05 and 0.1 wt%) and subsequently fabricated using vacuum-assisted resin transfer molding followed by compression molding. Interlaminar shear strength (ILSS) tests showed improvements of 4% and 8% for the 0.05% and 0.1% PCS treatments, respectively. These results indicate that PCS is effective in reinforcing interfacial adhesion, thereby improving the mechanical integrity of carbon fiber-reinforced composites.
ACTIVE CAPPING TECHNOLOGY - NEW APPROACHES FOR IN SITU REMEDIATION OF CONTAMINATED SEDIMENTS
This study evaluated pilot-scale active caps composed of apatite, organoclay, biopolymers, and sand for the remediation of metal-contaminated sediments. The active caps were constructed in Steel Creek, at the Savannah River Site near Aiken, South Carolina. Monitoring was conducted for 12 months. Effectiveness of the caps was based on an evaluation of contaminant bioavailability, resistance to erosion, and impacts on benthic organisms. Active caps lowered metal bioavailability in the sediment during the one-year test period. Biopolymers reduced sediment suspension during cap construction, increased the pool of carbon, and lowered the release of metals. This field validation showed that active caps can effectively treat contaminants by changing their speciation, and that caps can be constructed to include more than one type of amendment to achieve multiple goals.
Hierarchical computation in the SPMD programming model
Large-scale parallel machines are programmed mainly with the single program, multiple data (SPMD) model of parallelism. While this model has advantages of scalability and simplicity, it does not fit well with divide-and-conquer parallelism or hierarchical machines that mix shared and distributed memory. In this paper, we define the recursive single program, multiple data model (RSPMD) that extends SPMD with a hierarchical team mechanism to support hierarchical algorithms and machines. We implement this model in the Titanium language and describe how to eliminate a class of deadlocks by ensuring alignment of collective operations. We present application case studies evaluating the RSPMD model, showing that it enables divide-and-conquer algorithms such as sorting to be elegantly expressed and that team collective operations increase performance of conjugate gradient by up to a factor of two. The model also facilitates optimizations for hierarchical machines, improving scalability of particle in cell by 8x and performance of sorting and a stencil code by up to 40% and 14%, respectively.
Identification of the feeding arteries of hepatocellular carcinomas by performing dual arterial phase CT during pre-transarterial chemoembolization angiography
Purpose: This study evaluated the usefulness of performing dual arterial phase computed tomography (CT) during pre-transarterial chemoembolization (TACE) angiography for identifying the feeding arteries of hepatocellular carcinomas (HCC). Materials and methods: Dual arterial phase CT was performed during pre-TACE angiography in 73 patients with 139 HCC. Ten HCC underwent this procedure twice, so the total number of examined HCC was 149. Early and late arterial phase images were obtained 6 seconds after injection of an iodinated contrast material serially during a single breath-hold. The feeding artery was defined as the branch of the hepatic artery that was connected to the enhanced areas of the tumor. For HCC that could not be visualized on the early arterial phase images, fusion images superimposing the early and late arterial phase images were constructed. Furthermore, technical success defined as successful catheterization of the subsegmental or more distal feeding artery was evaluated. Results: The feeding artery was correctly identified on dual arterial phase CT in 146 of the 149 tumors (98.0%). In two HCC, the feeding arteries could not be identified due to severe motion artifacts, and in one, due to the presence of anastomosis between the right and left hepatic arteries. Catheterization of the subsegmental feeding artery was successful in all TACE procedures (technical success rate: 100%). Conclusion: Performing dual arterial phase CT during angiography appears to be useful for identifying the feeding arteries of HCC.
Hepatocellular Carcinoma Supplied by the Right Lumbar Artery
This study evaluated the clinical features of hepatocellular carcinoma (HCC) supplied by the right lumbar artery. Eleven patients with HCC supplied by the right lumbar artery were treated with chemoembolization. The patients' medical records were retrospectively analyzed. All patients underwent 6.7 {+-} 3.7 (mean {+-} SD) chemoembolization sessions, and the hepatic arterial branches were noted as being attenuated. The right inferior phrenic artery (IPA) was also embolized in 10 patients. The interval between initial chemoembolization and chemoembolization of the lumbar artery supply was 53.2 {+-} 26.9 months. Mean tumor diameter was 3.1 {+-} 2.4 cm and was located at the surface of S7 and S6. The feeding-branch arose proximal to the bifurcation of the dorsal ramus and muscular branches (n = 8) or from the muscular branches (n = 3) of the right first (n = 10) or second lumbar artery (n = 1). The anterior spinal artery originated from the tumor-feeding lumbar artery in one patient. All feeders were selected, and embolization was performed after injection of iodized oil and anticancer drugs (n = 10) or gelatin sponge alone in a patient with anterior spinal artery branching (n = 1). Eight patients died from tumor progression 10.1 {+-} 4.6 months later, and two patients survived 2 and 26 months, respectively. The remaining patient died of bone metastases after 32 months despite liver transplantation 10 months after chemoembolization. The right lumbar artery supplies HCC located in the bare area of the liver, especially in patients who undergo repeated chemoembolization, including chemoembolization by way of the right IPA. Chemoembolization by way of the right lumbar artery may be safe when the feeder is well selected.
Outcomes of Interventions Via a Transradial Approach for Dysfunctional Brescia-Cimino Fistulas
The transradial artery approach to angioplasty has rarely been reported as a method for treating dysfunctional Brescia-Cimino fistulas. This study evaluated the feasibility, safety, and 1-year efficacy of this method for treating dysfunctional Brescia-Cimino fistulas. We retrospectively evaluated 154 consecutive procedures in 131 patients (age, 58.3 {+-} 11.6 years; male, 48.1%) who underwent the transradial approach in dysfunctional Brescia-Cimino fistulas in the 1-year period after the procedure. The operator determined the use of a regular or a cutting balloon (two cases) in combination with urokinase injection (one case) or catheter thromboaspiration. Radial artery puncture was successful in all cases. Fifty-two cases (33.8%) had totally occluded fibrotic lesions. The overall anatomic success rate and clinical success rate were 61% (94/154) and 81.1% (125/154), respectively. In cases with a totally occluded fibrotic lesion, the clinical success rate was 46%. Successful intervention was associated with a significant reduction in the radial arterial systolic and diastolic pressures. There were no complications of symptomatic arterial embolization or pulmonary embolism, and one complication of venous rupture was successfully treated by compression. The primary patency rates based on intention-to-treat were 75.3% at 30 days and 39.0% at 1 year after the procedure. Excluding the cases with a totally occluded lesion, the clinical success rate was 99% (101/102) and the primary patency rates were 84.3% (86/102) and 52.0% (53/102) at 3 months and 1 year after the procedure, respectively. In conclusion, the transradial approach is a feasible, safe, and effective alternative for catheter intervention for dysfunctional Brescia-Cimino fistulas. Its success rate in cases with a totally occluded fibrotic lesion is unsatisfactory.