Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “error performance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Inertial references based on single mode optical fiber waveguides

Recent developments in low loss single mode optical fiber waveguides, semiconductor waveguide lasers and waveguide optical and electro-optical components have made a new class of rotational inertial frame references possible. The subclasses of possible fiber waveguide gyro configurations are discussed and one approach which is under development is reviewed. Signal detection and processing, error sources, expected physical and performance characteristics, and present development status are discussed.

Goss, W. C.↗
NASA NTRS1981

Mitigation of pulsed RFI via automatic gain control

Three automatic gain control (AGC) strategies and their potential capabilities for mitigation of pulsed radio frequency interference (RFI) over a coded, nonlinear channel are examined. The first updates the AGC control voltage once each symbol interval in accordance with a prespecified criterion. The second implementation is designed to first detect high level RFI and then appropriately update its gain. The final implementation is a wideband device which updates its gain once each symbol interval by reducing the gain in direct proportion to a suitable power measurement. Computed results treat pulsed noise and pulsed CW RFI and compare performances in terms of bit error rate (BER) at the output of a Viterbi decoder.

Chang, R. W.-S.↗
NASA NTRS1984

Contribution to the Performance Determination of Microjets

Theoretical investigations are made on the performance of microjets. A description is given of experiments with micropropulsion units to correlate the results obtained in the first part of the report. Execution of performance measurements is discussed, and error calculations are presented.

Hayn, D.↗
NASA NTRS1986

Simulated performance of the NASA 30/20 GHz test transponder using multi-H phase coded modulation

The performance of a proposed NASA 30/20 GHz satellite communications system is studied for multi-h phase coded modulation (MHPM) schemes. The techniques used to model and simulate a satellite communications channel including transmitter, receiver, filters, nonlinearities, and interferers are presented. The performance of various MHPM schemes is compared for several different channel configurations. As a measure of performance, the probability of bit error vs Eb/NO is computed using a Monte Carlo simulation technique. It is found that, regardless of the channel configuration, MHPM schemes can provide power efficiency over serial minimum shift keying modulation.

Meader, C. B.↗
NASA NTRS1987

Development of a Fresnel lens concentrator for space application

The selected conceptual design of the dome lens photovoltaic concentrator for space applications uses a 3.7 cm square aperture dome lens to focus onto a 0.4 cm active diameter gallium arsenide cell. The selected configuration will provide 91.5 percent lens optical efficiency and 21.4 percent cell efficiency at 100 suns irradiance and 100 C cell temperature, for an overall cell efficiency of 19.6 percent. The selected configuration will tolerate 1 degree tracking errors with negligible loss of performance. The selected panel weight is 2.5 kg/sq.m.

Oneill, Mark J.↗
NASA NTRS1987

Fast-response, high-precision carbon monoxide sensor using a tunable diode laser absorption technique

A tunable diode laser instrument, denoted as DACOM (Differential Absorption CO Measurement), has been developed to meet the fast-response, high-precision CO measurement needs of the GTE (Global Tropospheric Experiment) program. Under the GTE program, DACOM participated in the three field missions of CITE 1 (Chemical Instrumentation Test and Evaluation 1), a project involving the intercomparison of trace gas measurement techniques. DACOM performance, including analyses of measurement error sources, is discussed for the ground-based mission at Wallops Island, VA (summer 1983), and two missions on the NASA CV-990 (fall 1983 and spring 1984). Examples of fast-response (about 1 s), high-precision (+ or - 1 part per billion by volume, + or - 1.5 percent of reading) airborne data are included to illustrate the capability of this instrument.

Sachse, Glen W.↗
NASA NTRS1987

Development of response models for the Earth Radiation Budget Experiment (ERBE) sensors. Part 1: Dynamic models and computer simulations for the ERBE nonscanner, scanner and solar monitor sensors

Dynamic models and computer simulations were developed for the radiometric sensors utilized in the Earth Radiation Budget Experiment (ERBE). The models were developed to understand performance, improve measurement accuracy by updating model parameters and provide the constants needed for the count conversion algorithms. Model simulations were compared with the sensor's actual responses demonstrated in the ground and inflight calibrations. The models consider thermal and radiative exchange effects, surface specularity, spectral dependence of a filter, radiative interactions among an enclosure's nodes, partial specular and diffuse enclosure surface characteristics and steady-state and transient sensor responses. Relatively few sensor nodes were chosen for the models since there is an accuracy tradeoff between increasing the number of nodes and approximating parameters such as the sensor's size, material properties, geometry, and enclosure surface characteristics. Given that the temperature gradients within a node and between nodes are small enough, approximating with only a few nodes does not jeopardize the accuracy required to perform the parameter estimates and error analyses.

Halyo, Nesim↗
NASA NTRS1989

Adaptive Telemetry Multiplexer

Telemetry-data-acquisition unit adjusted remotely to produce changes in sampling rate, sampling channels, measurement scale, and output-bias level. Functional configuration adapted to changing conditions or new requirements by distant operator over telemetry link. Reconfiguration done in real time, without removing equipment from service. Bus-interface unit accepts reprogramming commands and translates them for low-rate adaptive multiplexer. Reprogrammable equipment reduces need for spare parts, since not necessary to stock variety of hardware with fixed characteristics. Adaptive multiplexer performs well in tests, amplitude errors less than 0.5 percent, distortion less than 0.25 percent, and crosstalk and common-mode rejection indiscernible.

Sinderson, R. L.↗
NASA NTRS1989

Euler procedure for three-dimensional transonic wall interference

Based on an optimization formulation, a procedure has been developed to evaluate Mach number and angle-of-attack corrections. The Euler equations are assumed to be the flow governing equations. To obtain efficient solutions for the optimization problem, the iterative solutions for the flow variables and the design parameters are simultaneously updated. In addition to the model lift and geometry, the procedure requires pressure measurements near the tunnel walls. The tunnel boundary conditions are based on the introduction of Reimann invariants for a one-dimensional flow normal to the boundary. Computations are performed to verify that the errors introduced by this approximate boundary-condition formulation are acceptably small. The correction scheme is applied to an aircraft configuration in an open jet. The results indicate that the optimization scheme is highly efficient with the rate of convergence of the flow solution nearly equal to the corresponding rate of a regular analysis problem.

Rizk, Magdi H.↗
NASA NTRS1990

Performance measurements for a laboratory-simulated 30/20 GHz communication satellite transponder

NASA has developed a digital satellite communications system simulator and test bed facility, known as the Systems Integration, Test and Evaluation (SITE) Project. The purpose of the facility is to evaluate satellite system components, develop and verify system concepts, and perform satellite system experiments. A recently completed set of experiments measured the performance of the 30/20 GHz satellite transponder portion of the system in terms of RF parameters and high rate digital data transmission. The results of these tests indicate the quality of data transmission which can be obtained under various transponder conditions, as well as the relative effects of degraded RF performance on the bit-error rate (BER) of transmitted data.

Kerczewski, Robert J.↗
NASA NTRS1990

Performance measurements for a laboratory-simulated 30/20 GHz communication satellite transponder

NASA has developed a digital satellite communications system simulator and test bed facility, known as the SITE (System Integratrion, Test and Evaluation) Project. The purpose of the facility is to evaluate satellite system components, develop and verify system concepts, and perform satellite system experiments. A recently completed set of experiments measured the performance of the 30/20 GHz satellite transponder portion of the system in terms of RF parameters and high rate digital data transmission. The results of these tests indicate the quality of data transmission which can be obtained under various transponder operating conditions, as well as the relative effects of degraded RF performance on the bit-error rate (BER) of transmitted data.

Kerczewski, Robert J.↗
NASA NTRS1990

Model-based estimation of wind fields over the ocean from wind scatterometer measurements. I - Development of the wind field model. II - Model parameter estimation

Techniques for the determination of near-surface mesoscale ocean wind fields on the basis of satellite scatterometer data are developed and demonstrated. The derivation of normal-boundary and parameterized-boundary-condition (PBC) wind-field models is outlined, and results from a simulation performed to estimate the model errors are presented in tables. It is shown that the PBC model provides accurate results while minimizing the number of unknowns. After a review of the principles of scatterometry and an analysis of scatterometer measurement noise, an objective function for the measurement parameters is developed and optimized on the basis of gradient search with initial values computed from pointwise wind estimates. The model is then applied to data from a simulation of the NASA Scatterometer (Li et al., 1984), and the results are presented in extensive graphs. The feasibility of model-based wind-field estimation and the appropriateness of the PBC model are demonstrated.

Long, David G.↗
NASA NTRS1990

Statistical analysis of AFE GN&C aeropass performance

Performance of the guidance, navigation, and control (GN&C) system used on the Aeroassist Flight Experiment (AFE) spacecraft has been studied with Monte Carlo techniques. The performance of the AFE GN&C is investigated with a 6-DOF numerical dynamic model which includes a Global Reference Atmospheric Model (GRAM) and a gravitational model with oblateness corrections. The study considers all the uncertainties due to the environment and the system itself. In the AFE's aeropass phase, perturbations on the system performance are caused by an error space which has over 20 dimensions of the correlated/uncorrelated error sources. The goal of this study is to determine, in a statistical sense, how much flight path angle error can be tolerated at entry interface (EI) and still have acceptable delta-V capability at exit to position the AFE spacecraft for recovery. Assuming there is fuel available to produce 380 ft/sec of delta-V at atmospheric exit, a 3-sigma standard deviation in flight path angle error of 0.04 degrees at EI would result in a 98-percent probability of mission success.

Chang, Ho-Pen↗
NASA NTRS1992

Error analysis of finite element results on plates with nonuniform grids

Discrete Dirac delta functions in two dimensions and the governing plate differential equations are used to produce continuous approximations from discrete finite-element data on nonuniform grids. The resulting continuous approximation when compared to the discrete data provides an error analysis. Moreover, the continuous approximation can be differentiated to compute continuous stresses needed for component failure prediction. Stresses can then be calculated accurately at boundaries and at interfaces where finite-element analysis alone may not provide reliable results. The continuous solution along with the differential equations also provides a residual error which is used in the error analysis. This is a unique feature of this approach. Two application examples of the procedure are provided. One example involves the linear response of a clamped square plate under uniform transverse load. Results from finite-element analysis and the continuous solution from the present analysis are compared to a closed-form elasticity solution. The continuous solution is used in a Zienkiewicz-Zhu error estimator to assess the performance of the present analysis. The continuous solution is observed to dramatically correct the finite-element results. In a second example, results for the nonlinear response of a stiffened panel are compared to the finite-element solution.

Sistla, Rajaram↗
NASA NTRS1992

Precise orbit determination of high-earth elliptical orbiters using differenced Doppler and ranging measurements

Recent advances in NASA's Deep Space Network station calibration methods have led to renewed interest in the use of differenced radiometric data types for interplanetary navigation, particularly differenced Doppler and range. An orbit determination error analysis which compares the performance of these differenced data types when used in concert with conventional two-way Doppler for precise navigation of high-earth orbiters is described. Three highly elliptical orbits are investigated, with apogee heights on the order of 20,000 km, 70,000 km, and 156,000 km. The analysis assumes that each orbiter's downlink antenna has no ground footprint limitation in the near apogee regime. Results indicate that the most significant navigational accuracy improvements are seen for the lowest-altitude orbit by using differenced Doppler measurements in conjunction with two-way Doppler. The results for the two higher-altitude orbits, although less dramatic, suggest that accuracy improvements can also be achieved when differenced range measurements are combined with two-way Doppler.

Estefan, Jeff A.↗
NASA NTRS1991

Studies on distributed sensing and processing for the control of large flexible spacecraft

Technology is being developed to process signals from distributed sensors using distributed computations. These distributed sensors provide a new feedback capability for vibration control that has not been exploited. Additionally, the sensors proposed are of an optical and distributed nature and could be employed with known techniques of distributed optical computation (Fourier optics, etc.) to accomplish the control system functions of filtering and regulation in a distributed computer. This paper reviews a procedure for the analytic design of control systems for this application. For illustration, the procedure is applied to the problem of suppressing the vibrations of a simply supported beam. A simulator has been developed to study the effects of sensor and processing errors. An extensive study of the effects of these errors on estimation and regulation performance is presented.

Montgomery, Raymond C.↗
NASA NTRS1992

Design of a monopulse SAR system to determine elevation angles

Terrain height variations in mountainous areas cause problems in radiometric corrections of synthetic aperture radar (SAR) images. To determine the elevation angle and the height at the different parts of an image, an application of the monopulse principle is proposed. From the ratios of images radiometrically modulated by the difference and sum antenna pattern in range it is possible to calculate the appropriate elevation angle at any point in the image. Design considerations for a corresponding airborne SAR-system are presented, and some estimates of error influences (e.g., ambiguities), expected performance and precision in topographic mapping are given.

Oettl, H.↗