Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “enhanced sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Large CO 2 effluxes at night and during synoptic weather events significantly contribute to CO 2 emissions from a reservoir

CO 2 emissions from inland waters are commonly determined by indirect methods that are based on the product of a gas transfer coefficient and the concentration gradient at the air water interface (e.g., wind-based gas transfer models). The measurements of concentration gradient are typically collected during the day in fair weather throughout the course of a year. Direct measurements of eddy covariance CO 2 fluxes from a large inland water body (Ross Barnett reservoir, Mississippi, USA) show that CO 2 effluxes at night are approximately 70% greater than those during the day. At longer time scales, frequent synoptic weather events associated with extratropical cyclones induce CO 2 flux pulses, resulting in further increase in annual CO 2 effluxes by 16%. Therefore, CO 2 emission rates from this reservoir, if these diel and synoptic processes are under-sampled, are likely to be underestimated by approximately 40%. Our results also indicate that the CO 2 emission rates from global inland waters reported in the literature, when based on indirect methods, are likely underestimated. Field samplings and indirect modeling frameworks that estimate CO 2 emissions should account for both daytime-nighttime efflux difference and enhanced emissions during synoptic weather events. Furthermore, the analysis here can guide carbon emission sampling to improve regional carbon estimates.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2013

Normal and outlying populations of the Milky Way stellar halo at [Fe/H] <–2

From detailed abundance analysis of >100 Hamburg/ESO candidate extremely metal-poor (EMP) stars we find 45 with [Fe/H] < –3.0 dex. We identify a heretofore unidentified group: Ca-deficient stars with sub-solar [Ca/Fe] ratios and the lowest neutron-capture abundances; the Ca-deficient group comprises ∼10% of the sample, excluding Carbon stars. Our radial velocity distribution shows that the carbon-enhanced stars with no s-process enhancements, CEMP-no, and which do not show C{sub 2} bands are not preferentially binary systems. Ignoring Carbon stars, approximately 15% of our sample are strong (≥5σ) outliers in one or more elements between Mg and Ni; this rises to ∼19% if very strong (≥10σ) outliers for Sr and Ba are included. Examples include: HE0305–0554 with the lowest [Ba/H] known; HE1012–1540 and HE2323–0256, two (non-velocity variable) C-rich stars with very strong [Mg,Al/Fe] enhancements; and HE1226–1149, an extremely r-process rich star.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2017

Intrinsically low thermal conductivity from a quasi-one-dimensional crystal structure and enhanced electrical conductivity network via Pb doping in SbCrSe 3

The development of new routes for the production of thermoelectric materials with low-cost and high-performance characteristics has been one of the long-term strategies for saving and harvesting thermal energy. We report a new approach for improving thermoelectric properties by employing the intrinsically low thermal conductivity of a quasi-one-dimensional (quasi-1D) crystal structure and optimizing the power factor with aliovalent ion doping. As an example, we demonstrated that SbCrSe 3 , in which two parallel chains of CrSe 6 octahedra are linked by antimony atoms, possesses a quasi-1D property that resulted in an ultra-low thermal conductivity of 0.56 W m -1 K -1 at 900 K. After maximizing the power factor by Pb doping, the peak ZT value of the optimized Pb-doped sample reached 0.46 at 900 K, which is an enhancement of 24 times that of the parent SbCrSe 3 structure. The mechanisms that lead to low thermal conductivity derive from anharmonic phonons with the presence of the lone-pair electrons of Sb atoms and weak bonds between the CrSe 6 double chains. Our results shed new light on the design of new and high-performance thermoelectric materials.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Enhanced reaction rates in NDP analysis with neutron scattering

Neutron depth profiling (NDP) makes accessible quantitative information on a few isotopic concentration profiles ranging from the surface into the sample a few micrometers. Because the candidate analytes for NDP are few, there is little interference encountered. Furthermore, neutrons have no charge so mixed chemical states in the sample are of no direct concern. There are a few nuclides that exhibit large probabilities for neutron scattering. The effect of neutron scattering on NDP measurements has not previously been evaluated as a basis for either enhancing the reaction rates or as a source of measurement error. Hydrogen is a common element exhibiting large neutron scattering probability found in or around sample volumes being analyzed by NDP. A systematic study was conducted to determine the degree of signal change when neutron scattering occurs during analysis. The relative signal perturbation was evaluated for materials of varied neutron scattering probability, concentration, total mass, and geometry. Signal enhancements up to 50% are observed when the hydrogen density is high and in close proximity to the region of analysis with neutron beams of sub thermal energies. Greater signal enhancements for the same neutron number density are reported for thermal neutron beams. Even adhesive tape used to position the sample produces a measureable signal enhancement. Because of the shallow volume, negligible distortion of the NDP measured profile shape is encountered from neutron scattering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Enhanced Photocatalytic Property of Cu Doped Sodium Niobate

Here, we investigate the photocatalytic activity of Cu doped NaNbO 3 powder sample prepared by the modified polymer complex method. The photocatalytic activity of hydrogen evolution from methanol aqueous solution was improved by Cu 2.6 at% doping. The photocatalytic degradation of rhodamine B (RhB) under visible light irradiation was enhanced in comparison with pristine NaNbO 3 . Cu introduction improved the adsorption property of NaNbO 3 , judging from the Fourier transform infrared spectra. Moreover, the ultraviolet light excitation in Cu doped sample would accelerate the mineralized process.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Crystallization processes in Ge{sub 2}Sb{sub 2}Se{sub 4}Te glass

Highlights: • Crystallization kinetics of Ge{sub 2}Sb{sub 2}Se{sub 4}Te glass was studied in dependence on particle size by DSC. • All studied fractions were described in terms of the SB autocatalytic model. • Relatively high amount of Te enhances manifestation of bulk crystallization mechanisms. • XRD analysis of samples crystallized under different conditions showed correlation with DSC data. • XRD analysis revealed a new crystallization mechanism indistinguishable by DSC. - Abstract: Differential scanning calorimetry (DSC) and X-ray diffraction (XRD) analysis were used to study crystallization in Ge{sub 2}Sb{sub 2}Se{sub 4}Te glass under non-isothermal conditions as a function of the particle size. The crystallization kinetics was described in terms of the autocatalytic Šesták–Berggren model. An extensive discussion of all aspects of a full-scale kinetic study of a crystallization process was undertaken. Dominance of the crystallization process originating from mechanically induced strains and heterogeneities was confirmed. Substitution of Se by Te was found to enhance the manifestation of the bulk crystallization mechanisms (at the expense of surface crystallization). The XRD analysis showed significant dependence of the crystalline structural parameters on the crystallization conditions (initial particle size of the glassy grains and applied heating rate). Based on this information, a new microstructural crystallization mechanism, indistinguishable by DSC, was proposed.

36 MATERIALS SCIENCE↗
NASA NTRS1995

Star formation activity in spiral galaxy disks and the properties of radio halos: Observational evidence for a direct dependence

In this article we address observationally the questions: how does star formation (SF) in the disks of galaxies lead to the creation of radio halos, and what minimum energy input into the interstellar medium (ISM) is needed to facilitate this? For the investigation we use a sample of five edge-on galaxies exhibiting radio continuum emmission in their halos and enhanced SF spread over large parts of their disks. In a detailed study of the two galaxies in our sample for which we have the best data, NGC 891 and NGC 4631, we show that the radio halos cut off abruptly at galactocentric radii smaller than those of the underlying thin radio disks. Our most important result is that the halo cutoffs are spatially coincident with the radii where the SF activity in the underlying disks drops sharply. The difference in radius of the emission distributions tracing ongoing SF in the disks (IRAS 50 micrometers, H alpha) versus that of the nonthermal radio continuum thin disks (tracing the distribution of cosmic-ray (CR) electrons) is typically a few kpc. This difference in extent is caused by CR diffusion. We have measured the CR diffusion coefficients in the thin disks of both NGC 891 and NGC 4631. For radial diffusion of CR electrons within the galactic disks the values are D(sub r) = 1.1-2.5 x 10 (exp 29) sq cm/s (NGC 4631) and D(sub r) = 1.2 x 10(exp 29) sq cm/s (NGC 891). For motions in the z-direction in areas within the thin disks where no outflows occur, we derive a firm upper limit of D(sub z) less than or equal to 0.2 x 10(exp 28) sq cm/s for NGC 891. The value for NGC 4631 is D(sub z = 1.4 x 10 (exp 28) sq cm/s. The other three galaxies in our sample, NGC 3044, NGC 4666, and NGC 5775 show (at the sensitivity of our data) less extended, more filamentary radio halos. Isolates spurs or filaments of nonthermal radio continuum emission in their halos are traced only above the most actively star-forming regions in the disks. This, in conjuction with the results obtained for NGC 891 and NGC 4631, suggests a direct connection between the shapes and radial extents of radio halos of normal galaxies and the level and the spatial distribution of the current SF in their disks. The existence of filamentary structures implies that expansion and convection of CR-heated plasma plays an important role even at low z-distances above the plane. Based on radio data we derive the disk-averaged mean energy input rates into the ISM due to supernova explosions per unit surface area in nine galaxies, including the ones in our sample. We find a clear trend in the sense that the galaxies with the highest mean energy input rates in the underlying disks have the most extended and pervasisve radio halos. Below a certain threshohld, outflows are inhibited. As a lower limit for this threshhold we derive an energy input rate of approximately 10 (exp -4) erg/s sq cm. The fact that radio halo emission is found only above the most luminous giant H 2 regions in late-type 'normal' galaxies (of type Sbc or later) indicates that only these are capable of initiating disk-halo interactions by locally exceeding the threshold. The distribution of the local outflows determines the overall shapes of the CR halos and leads to the observed filamentary structures.

Dahlem, Michael↗
NASA NTRS2000

Proposed Science Requirements and Acquisition Priorities for the First Mars Sample Return

A sample return mission is an important next step in the exploration of Mars. The first sample return should come early in the program time-line because the science derived from earth-based analyses of samples provides crucial "ground truth" needed for further exploration planning, enhancement of remote measurements, and achieving science goals and objectives that include: (1) the search for environments that may support life and any indicators of the past or present existence of life, (2) understanding the history of water and climate on Mars, (3) understanding the evolution of Mars as a planet. Returned samples from Mars will have unique value because they can be studied by scientists worldwide using the most powerful analytical instruments available. Furthermore, returned Mars samples can be preserved for studies by future generations of scientists using new techniques and addressing new issues in Mars science. To ensure a high likelihood of success, the first sample return strategy should be simple and focused. We outline a fundamental set of sample requirements and acquisition priorities for Mars sample return.

Agee, C. B.↗
DOE OSTI2018

An algorithm to correct saturated mass spectrometry ion abundances for enhanced quantitation and mass accuracy in omic studies

The mass accuracy and peak intensity of ions detected by mass spectrometry (MS) measurements are essential to facilitate compound identification and quantitation. However, high concentration species can easily cause problems if their ion intensities reach beyond the limits of the detection system, leading to distorted and non-ideal detector response (e.g. saturation), and largely precluding the calculation of accurate m/z and intensity values. Here we present an open source computational method to correct peaks above a defined intensity (saturated) threshold determined by the MS instrumentation such as the analog-to-digital converters or time-to-digital converters used in conjunction with time-of-flight MS. In this method, the isotopic envelope for each observed ion above the saturation threshold is compared to its expected theoretical isotopic distribution. The most intense isotopic peak for which saturation does not occur is then utilized to re-calculate the precursor m/z and correct the intensity, resulting in both higher mass accuracy and greater dynamic range. The benefits of this approach were evaluated with proteomic and lipidomic datasets of varying complexities. After correcting the high concentration species, reduced mass errors and enhanced dynamic range were observed for both simple and complex omic samples. Specifically, the mass error dropped by more than 50% in most cases with highly saturated species and dynamic range increased by 1-2 orders of magnitude for peptides in a blood serum sample.

Environmental Molecular Sciences Laboratory↗
DOE OSTI2025

Introducing new resonant soft x-ray scattering capability in SSRL

Resonant soft x-ray scattering (RSXS) is a powerful technique for probing both spatial and electronic structures within solid-state systems. Here, we present a newly developed RSXS capability at beamline 13-3 of the Stanford Synchrotron Radiation Lightsource, designed to enhance materials science research. This advanced setup achieves a base sample temperature as low as 9.8 K combined with extensive angular motions (azimuthal ϕ and flipping χ), enabling comprehensive exploration of reciprocal space. Two types of detectors—an Au/GaAsP Schottky photodiode and a charge-coupled device detector with over 95% quantum efficiency—are integrated to effectively capture scattered photons. Extensive testing has confirmed the enhanced functionality of this RSXS setup, including its temperature and angular performance. The versatility and effectiveness of the system have been demonstrated through studies of various materials, including superlattice heterostructures and high-temperature superconductors.

Kuo, Cheng-Tai [SLAC National Accelerator Laborato↗
DOE OSTI2019

Characterization of laboratory-scale hydraulic fracturing for EGS

To investigate the impact of reservoir stimulation by hydraulic fracturing, a series of advanced lab-scale block tests were conducted with multiple measurement methods to characterize the fracture and to assess the operation and the performance of an enhanced or engineered geothermal system (EGS). The stimulation test samples were 330-mm cubic blocks of Sierra White granite with one injection well and four producers drilled into it. Acoustic emissions generated during the fracture initiation and propagation were monitored with twenty AE sensors mounted on all sides of the block to help characterize the fracture initiation and propagation process. The recorded AE signals were analyzed to obtain the event location and the failure mechanism. The localized AE events shows that due to the low viscosity of the fracturing fluid (water), the fracture propagated rapidly and took only about 1.4 s to reach near the block surface. During the fracturing phase, about 47 percent of the events were determined to be shear/mixed mode failure events, 28 percent tensile failure events, and 25 percent compressional failure events. Just after the simulation, a step-rate (constant flowrate) injection test was carried out to investigate the reservoir injectivity enhancement. During this phase additional compressional failure events were observed and the percentages of tensile failure and shear/mixed mode failure decreased. The dramatic increase of the injection rate with small increments of the injection pressure demonstrates the nonlinear response of the fracture to effective normal stress variation with much higher fracture opening increase during the low effective normal stress interval. Hydraulic fracturing tests under different stress levels show that more AE hits/events are recorded when the rock block is under higher applied stress. The reconstructed 3D fracture geometry shows good agreement with the AE monitoring results. After fracturing, a tracer test was carried out and the fracture aperture was estimated to be around 139 μm. The tracer recovery curve shows two linear portions of the tracer tail on a semi-log plot similar to that observed in some field data and predicted by numerical modeling. Laser scanning of the fracture surfaces indicates that the induced fracture has a rough surface with a joint roughness coefficient (JRC) of 12.98 and tortuosity of 1.10, both of which are slightly larger than that from the Brazilian test fracture on the same rock. The thin section and SEM observations show that the fracture follows the weak boundaries between the Quartz and Albite grains or the weak beddings in the grains.

58 GEOSCIENCES↗
NASA NTRS1993

High resolution IRAS observations of interacting systems in the IRAS bright galaxy sample

Several conclusions have been drawn from IRAS observations and the determination of infrared fluxes of interacting bright galaxies. These are: (1) individual interacting galaxies are indistinguishable from isolated galaxies of similar blue luminosity on the basis of infrared properties; (2) no correlation was found between measures of interaction strength and indicators of enhanced star formation; and (3) comparison of the interacting and isolated samples indicates substantial differences between their distributions of far-infrared color ratios, luminosities, and surface brightnesses.

Surace, Jason A.↗
DOE OSTI2015

Magnetically tunable alternating current electrical properties of x La{sub 0.7}Sr{sub 0.3}MnO{sub 3}–(1 − x) ErMnO{sub 3} (x = 0.1, 0.3, and 0.5) multiferroic nanocomposite

Detailed magnetically tunable ac electrical properties of x La{sub 0.7}Sr{sub 0.3}MnO{sub 3} (LSMO)–(1 − x) ErMnO{sub 3} (EMO) (x = 0.1, 0.3, and 0.5) multiferroic nanocomposites have been studied at 300 K in presence of varying magnetic field (H{sub appl}), applied both in parallel and perpendicular configuration with respect to the measuring electric field. AC electrical properties have exhibited significant variation with H{sub appl} for all composites, whereas for parallel configuration of H{sub appl} such effect is very feeble for x = 0.3 composite. We have attributed this anisotropic behavior to the demagnetization effect in the sample. In contrast, for x = 0.1 and 0.5 composites, no such anisotropy effect is experimentally evidenced. Impedance and real part of impedance have been found to decrease with H{sub appl} at low frequency (f) region. We attribute this observation to the depinning of the magnetic domain walls from the grain boundaries pinning centers and thereby enhancing the spin dependent transport in the composite. For x = 0.3 composite, Nyquist plots have been fitted considering dominant contributions of LSMO and EMO grain boundaries and the interface region between them. However, for x = 0.1 composite, it corresponds to EMO grain boundaries and grain boundary interface region. The relaxation frequency (f{sub R}) is observed to shift at higher/lower f region in perpendicular/parallel configuration of H{sub appl} for x = 0.3 composite. This opposite variation of f{sub R}s with H{sub appl} for perpendicular and parallel configurations has been attributed to two competing factors of H{sub appl} induced enhancement of inductive part and H{sub appl} enhanced spin dependent transport causing fast relaxation processes in the sample. For x = 0.1 composite, in both configurations of H{sub appl}, f{sub R}s is shifting towards high f region, which has been discussed in terms of dominant role of spin dependent transport.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Constraints on the normal branch of DGP gravity from SPT galaxy clusters with DES and HST weak-lensing mass calibration and from P l a n c k PR4 CMB anisotropies

We present constraints on the normal branch of the Dvali-Gabadadze-Porrati (nDGP) braneworld gravity model from the abundance of massive galaxy clusters. On scales below the nDGP crossover scale r c , the nDGP model features an effective gravitylike fifth force that alters the growth of structure, leading to an enhancement of the halo mass function (HMF) on cluster scales. The enhanced cluster abundance allows for constraints on the nDGP model using cluster samples. We employ the South Pole Telescope (SPT) cluster sample, selected through the thermal Sunyaev-Zel’dovich effect with the SPT and with mass calibration using weak-lensing data from the Dark Energy Survey (DES) and the Hubble Space Telescope (HST). The cluster sample contains 1,005 clusters with redshifts 0.25 < z < 1.78 , which are confirmed with the multicomponent matched filter algorithm using optical and near-infrared data. Weak-lensing data from DES and HST enable a robust mass measurement of the cluster sample. We use DES Year 3 data for 688 clusters with redshifts z < 0.95 , and HST data for 39 clusters with redshifts 0.6 < z < 1.7 . We account for the enhancement in the HMF through a semi-analytic correction factor to the standard cosmology HMF derived from the spherical collapse model in the nDGP model. We then further calibrate this model using N -body simulations. In addition, for the first time, we analyze the primary CMB temperature and polarization anisotropy measurements from Planck PR4 within the nDGP model. We obtain a competitive constraint from the joint analysis of the SPT cluster abundance with the Planck PR4 data, and report an upper bound of 1 / H 0 r c < 1.41 at 95% when assuming a cosmology with massive neutrinos.

Vogt, S. M.L. [Munich U. Observ.; LMU Munich (main↗
NASA NTRS1990

Quantifying the FIR interaction enhancement in paired galaxies

The Catalog of Isolated Pairs of Galaxies in the Northern Hemisphere, by Karachentsev (1972), was studied and a well-matched comparison sample taken from the Catalog of Isolated Galaxies, by Karachentseva (1973), in order to quantify the enhanced FIR emission properties of interacting galaxies.

Xu, Cong↗
DOE OSTI2013

THE SECOND FERMI LARGE AREA TELESCOPE CATALOG OF GAMMA-RAY PULSARS

This catalog summarizes 117 high-confidence ≥0.1 GeV gamma-ray pulsar detections using three years of data acquired by the Large Area Telescope (LAT) on the Fermi satellite. Half are neutron stars discovered using LAT data through periodicity searches in gamma-ray and radio data around LAT unassociated source positions. The 117 pulsars are evenly divided into three groups: millisecond pulsars, young radio-loud pulsars, and young radio-quiet pulsars. We characterize the pulse profiles and energy spectra and derive luminosities when distance information exists. Spectral analysis of the off-peak phase intervals indicates probable pulsar wind nebula emission for four pulsars, and off-peak magnetospheric emission for several young and millisecond pulsars. We compare the gamma-ray properties with those in the radio, optical, and X-ray bands. We provide flux limits for pulsars with no observed gamma-ray emission, highlighting a small number of gamma-faint, radio-loud pulsars. The large, varied gamma-ray pulsar sample constrains emission models. Fermi's selection biases complement those of radio surveys, enhancing comparisons with predicted population distributions.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2014

Enhanced quantum efficiency of amorphous silicon thin film solar cells with the inclusion of a rear-reflector thin film

We investigated the growth mechanism of amorphous silicon thin films by implementing hot-wire chemical vapor deposition and fabricated thin film solar cell devices. The fabricated cells showed efficiencies of 7.5 and 8.6% for the samples without and with the rear-reflector decomposed by sputtering, respectively. The rear-reflector enhances the quantum efficiency in the infrared spectral region from 550 to 750 nm. The more stable quantum efficiency of the sample with the inclusion of a rear-reflector than the sample without the rear-reflector due to the bias effect is related to the enhancement of the short circuit current.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Interface Carriers and Enhanced Electron-Phonon Coupling Effect in Al 2 O 3 /TiO 2 Heterostructure Revealed by Resonant Inelastic Soft X-Ray Scattering

The electronic structure and the electron-phonon couplings in a novel mass-production-compatible Al 2 O 3 /TiO 2 2D electron system (2DES) are investigated using resonant inelastic soft X-ray scattering. The experimental data from the samples of various TiO 2 thicknesses unequivocally show that the Ti 3+ state indeed exists at the deep interface to serve as an n-type dopant for the 2DES. Here, the electronic structure of Ti 3+ species is scrutinized as entirely separated from that of the Ti 4+ host lattice. Furthermore, features of sub-eV energy loss phonon modes are clearly observed, indicating substantial electron-phonon coupling effects. Such low energy loss features are enhanced in thinner TiO 2 samples, implying that polaronic local lattice deformation is enhanced due to the presence of Ti 3+ . These findings suggest that the 2DES properties can be controlled via well-established TiO 2 engineering, thereby enthroning the binary oxide heterostructure as a promising candidate for 2DES device applications.

2D electron gas↗