Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electron spin”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Synthesis, Stability, and Magnetic Properties of Antiperovskite Co 3 PdN

Experimental synthesis and characterization of theoretically predicted compounds are important steps in the materials discovery pipeline. Here, we report on the synthesis of Co 3 PdN, which was recently predicted to be a stable magnetic antiperovskite. The Co 3 PdN thin films were grown by reactive sputtering and were confirmed to form in an antiperovskite crystal structure. The thermal stability of the compound is demonstrated up to 600 K by in situ X-ray diffraction, though the phase persists at slightly higher temperatures (700 K) in an air-free magnetometer. Both ab initio calculations and magnetization measurements find Co 3 PdN to be ferromagnetic with an experimentally determined Curie temperature of T C = 560 ± 5 K. The saturation magnetization of 1.2 μ B /Co found in the experiment is slightly lower than the 1.7 μ B /Co value expected by theory. A narrow magnetic hysteresis loop with a coercive field of 100 Oe at low temperature suggests that Co 3 PdN might be useful in electronic applications requiring fast switching of the magnetization vector. While prior prediction of Co 3 PdN showed a gapped electronic band structure for each spin channel, we show that this was due to incomplete sampling of Brillouin zone paths and that band crossings exist along R-X|M and X|M-R paths. The metallic nature of Co 3 PdN is further confirmed by temperature-dependent transport measurements, which also show a considerable anomalous Hall effect. Altogether, this work represents an appreciable step toward understanding the synthesis, structure, stability, and properties of a new magnetic material.

14 SOLAR ENERGY↗
DOE OSTI2020

Table-Top X-ray Spectroscopy of Benzene Radical Cation

Herein, ultrafast table-top X-ray spectroscopy at the carbon K-edge is used to measure the X-ray spectral features of benzene radical cations (Bz + ). The ground state of the cation is prepared selectively by two-photon ionization of neutral benzene, and the X-ray spectra are probed at early times after the ionization by transient absorption using X-rays produced by high harmonic generation (HHG). Bz + is well-known to undergo Jahn-Teller distortion, leading to a lower symmetry and splitting of the π orbitals. Comparison of the X-ray absorption spectra of the neutral and the cation reveals a splitting of the two degenerate π* orbitals as well as an appearance of a new peak due to excitation to the partially occupied π-subshell. The π* orbital splitting of the cation, elucidated on the basis of high-level calculations in a companion theoretical paper, is discovered to be due to both the symmetry distortion and even more dominant spin coupling of the unpaired electron in the partially vacant π orbital (from ionization) with the unpaired electrons resulting from the transition from the 1s C core orbital to the fully vacant π* orbitals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Mechanistic Insights into Visible-Light-Induced ATRA Reactions Powered by the Symbiotic Relationship between Cu(II)/Cu(I) Phenanthroline Complexes

As photoredox catalysis continues to yield promising chemical transformations, there is an increased need to understand how specific photocatalysts function to improve reaction efficiencies while expanding their scope. Copper-phenanthroline-based photocatalysts such as Cu II (dap)Cl 2 (dap = 2,9-di(p-anisyl)-1,10-phenanthroline) and [Cu I (dap) 2 ]Cl were both found to be equally capable of olefin activation through electrophilic atom transfer radical addition (ATRA) reactions. Although these molecular catalysts have proven successful, many intermediates suggested in the proposed catalytic cycles have never been detected. One undetermined aspect in this chemistry is related to how one equivalent of Cu II (dap)Cl 2 generates half of an equivalent of [Cu I (dap) 2 ] + during the photocatalytic sequence. To this end, we initially used more synthetically accessible model systems, namely, [Cu I (dpp) 2 ]Cl and Cu II (dpp)Cl 2 (dpp = 2,9-diphenyl-1,10-phenanthroline), to glean detailed mechanistic insights into this unusual symbiotic relationship. We directly detected several intermediates involved in the ATRA photocatalytic cycle using these model chromophores in conjunction with electronic spectroscopy, infrared matrix-assisted laser desorption electrospray ionization (IR-MALDESI) mass spectrometry, electronic structure calculations, EPR spin-trap experiments, and 1 H NMR spectroscopy. We found that the unique ligand lability and coordinating properties of acetonitrile enable both the in situ oxidation of [Cu I (dpp) 2 ] + by tosyl chloride into Cu II (dpp)Cl 2 and the visible-light-induced homolysis of the Cu II –Cl bond, which initiates the conversion to the Cu I species [Cu I (dpp) 2 ][Cu I Cl 2 ]. Here, the combined findings from the present study of the catalytic cycle demonstrate that the symbiotic relationship between Cu II (dpp)Cl 2 and [Cu I (dpp) 2 ] + , as well as between Cu II (dap)Cl 2 and [Cu I (dap) 2 ] + , is the critical factor enabling the ATRA photoreaction by departing from either photocatalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Roadmap for Photonics with 2D Materials

Triggered by advances in atomic-layer exfoliation and growth techniques, along with the identification of a wide range of extraordinary physical properties in self-standing films consisting of one or a few atomic layers, two-dimensional (2D) materials such as graphene, transition metal dichalcogenides (TMDs), and other van der Waals (vdW) crystals now constitute a broad research field expanding in multiple directions through the combination of layer stacking and twisting, nanofabrication, surface-science methods, and integration into nanostructured environments. Photonics encompasses a multidisciplinary subset of those directions, where 2D materials contribute remarkable nonlinearities, long-lived and ultraconfined polaritons, strong excitons, topological and chiral effects, susceptibility to external stimuli, accessibility, robustness, and a completely new range of photonic materials based on layer stacking, gating, and the formation of moiré patterns. These properties are being leveraged to develop applications in electro-optical modulation, light emission and detection, imaging and metasurfaces, integrated optics, sensing, and quantum physics across a broad spectral range extending from the far-infrared to the ultraviolet, as well as enabling hybridization with spin and momentum textures of electronic band structures and magnetic degrees of freedom. The rapid expansion of photonics with 2D materials as a dynamic research arena is yielding breakthroughs, which this Roadmap summarizes while identifying challenges and opportunities for future goals and how to meet them through a wide collection of topical sections prepared by leading practitioners.

2D materials↗
DOE OSTI2023

Weyl nodal ring states and Landau quantization with very large magnetoresistance in square-net magnet EuGa 4

Magnetic topological semimetals allow for an effective control of the topological electronic states by tuning the spin configuration. Among them, Weyl nodal line semimetals are thought to have the greatest tunability, yet they are the least studied experimentally due to the scarcity of material candidates. Here, using a combination of angle-resolved photoemission spectroscopy and quantum oscillation measurements, together with density functional theory calculations, we identify the square-net compound EuGa 4 as a magnetic Weyl nodal ring semimetal, in which the line nodes form closed rings near the Fermi level. The Weyl nodal ring states show distinct Landau quantization with clear spin splitting upon application of a magnetic field. At 2 K in a field of 14 T, the transverse magnetoresistance of EuGa 4 exceeds 200,000%, which is more than two orders of magnitude larger than that of other known magnetic topological semimetals. Our theoretical model suggests that the non-saturating magnetoresistance up to 40 T arises as a consequence of the nodal ring state.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Vacancy-induced suppression of charge density wave order and its impact on magnetic order in kagome antiferromagnet FeGe

Two-dimensional (2D) kagome lattice metals are interesting because their corner sharing triangle structure enables a wide array of electronic and magnetic phenomena. Recently, post-growth annealing is shown to both suppress charge density wave (CDW) order and establish long-range CDW with the ability to cycle between states repeatedly in the kagome antiferromagnet FeGe. Here we perform transport, neutron scattering, scanning transmission electron microscopy (STEM), and muon spin rotation (μSR) experiments to unveil the microscopic mechanism of the annealing process and its impact on magneto-transport, CDW, and magnetism in FeGe. Annealing at 560 °C creates uniformly distributed Ge vacancies, preventing the formation of Ge-Ge dimers and thus CDW, while 320 °C annealing concentrates vacancies into stoichiometric FeGe regions with long-range CDW. The presence of CDW order greatly affects the anomalous Hall effect, incommensurate magnetic order, and spin-lattice coupling in FeGe, placing FeGe as the only kagome lattice material with tunable CDW and magnetic order.

critical phenomena↗
DOE OSTI2026

Optical properties of a diamond NV color center from capped embedded multiconfigurational correlated wavefunction theory

Diamond defects are among the most promising qubits. Modeling their properties through accurate quantum mechanical simulations can further their development into robust units of information. We use the recently developed capped density functional embedding theory (capped-DFET) with the multiconfigurational n-electron valence second-order perturbation theory to characterize the electronic excitation energies for different spin manifolds of the well-characterized negatively charged substitutional N defect adjacent to a vacancy (V C ) in diamond (N C V C − ). We successfully reproduce vertical excitation energies for both triplet and singlet states of N C V C − with errors < 0.1 eV. Unlike other embedding methods, capped-DFET exhibits robust predictions that are approximately independent of the embedded cluster size: it only requires a cluster to contain the defect atoms and their nearest neighbors (as small as a 40-atom capped cluster). Furthermore, our method is free from slowly converging Coulomb interactions between charged defects, and thus also only weakly dependent on supercell size.

Chemistry↗
DOE OSTI2021

Cluster defects in gibbsite nanoplates grown at acidic to neutral pH

Gibbsite [α-Al(OH) 3 ] is the solubility limiting phase for aluminum across a wide pH range, and it is a common mineral phase with many industrial applications. The growth mechanism of this layered-structure material, however, remains incompletely understood. Synthesis of gibbsite at low to circumneutral pH yields nanoplates with substantial interlayer disorder. Here we examine defects in this material in detail, and the effects of recrystallization in highly alkaline sodium hydroxide solution at 80 °C. We employed a multimodal approach, including scanning electron microscopy, magic-angle spinning nuclear magnetic resonance (MAS-NMR), Raman and infrared spectroscopies, X-ray diffraction (XRD), and X-ray total scattering pair distribution function (XPDF) analysis to characterize the ageing of the nanoplates over several days. Additionally, XRD and XPDF indicate that gibbsite nanoplates precipitated at circumneutral pH contain dense, truncated sheets imparting a local difference in interlayer distance. These interlayer defects appear well described by flat Al 13 aluminum hydroxide nanoclusters nearly isostructural with gibbsite sheets present under synthesis conditions and trapped as interlayer inclusions during growth. Ageing at elevated temperature in alkaline solutions gradually improves crystallinity, showing a gradual increase in H-bonding between interlayer OH groups. Between 7 to 8 vol% of the initial gibbsite nanoparticles exhibit this defect, with the majority of differences disappearing after 2–4 hours of recrystallization in alkaline solution. The results not only identify the source of disorder in gibbsite formed under acidic/neutral conditions but also point to a possible cluster-mediated growth mechanism evident through inclusion of relict oligomers with gibbsite-like topology trapped in the interlayer spaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Electrocatalytic water oxidation performance in an extended porous organic framework with a covalent alliance of distinct Ru sites

The rational synthesis of durable, earth-abundant efficient electrocatalysts for the oxygen evolution reaction (OER) from water is one of the most important routes for storing renewable energy and minimizing fossil fuel combustion. The prime hurdles for effectively utilizing commercial RuO 2 as (OER) electrocatalysts are its very low stability, catalyst deactivation, and high cost. In this work, we explored a Ru-integrated porous organic polymer (Ru@Bpy-POP) by a facile one-pot Friedel–Crafts alkylation strategy between redox-active (Ru(demob) 3 Cl 2 ) and a carbazole unit, which is composed of unique features including an extended framework unit, isolated active sites, and tunable electrode kinetics. Ru@Bpy-POP can serve as a bridge between a Metal–Organic Framework (MOF) and POP-based catalytic systems with a balanced combination of covalent bonds (structural stability) and open metal sites (single site catalysis). Ru@Bpy-POP, deposited on a three-dimensional nickel foam electrode support, exhibits a promising electrocatalytic OER activity with an ultra-low ruthenium loading compared to a benchmark RuO 2 catalyst, providing an overpotential of about 270 mV to reach 10 mA cm –2 in an alkaline medium. Moreover, a high current density of 248 mA cm –2 was achieved for the Ru@Bpy-POP catalyst at only 1.6 V (vs. RHE), which is much higher than 91 mA cm –2 for commercial RuO 2 . The robust, albeit highly conjugated, POP framework not only triggered facile electro-kinetics but also suppressed aggregation and metallic corrosion during electrolysis. In particular, the benefits of covalent integration of distinct Ru sites into the framework can modulate intermediate adsorption and charge density, which contributes to its exceptional OER activity. All of the critical steps involved in OER are complemented by Density Functional Theory (DFT) calculations, which suggest that electrocatalytic water oxidation proceeds from a closed-shell configuration to open-shell electronic configurations with high-spin states. Finally, these open-shell configurations are more stable than their closed-shell counterparts by 1 eV, improving the overall catalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Effective Hamiltonians derived from equation-of-motion coupled-cluster wave functions: Theory and application to the Hubbard and Heisenberg Hamiltonians

Effective Hamiltonians, which are commonly used for fitting experimental observables, provide a coarse-grained representation of exact many-electron states obtained in quantum chemistry calculations; however, the mapping between the two is not trivial. In this contribution, we apply Bloch’s formalism to equation-of-motion coupled-cluster (EOM-CC) wave functions to rigorously derive effective Hamiltonians in the Bloch’s and des Cloizeaux’ forms. We report the key equations and illustrate the theory by application to systems with two or three unpaired electrons, which give rise to electronic states of covalent and ionic characters. We show that the Hubbard and Heisenberg Hamiltonians can be extracted directly from the so-obtained effective Hamiltonians. By establishing a quantitative connection between many-body states and simple models, the approach facilitates the analysis of the correlated wave functions. We propose a simple diagnostic for assessing the validity of the model space choice based on the overlaps between the target- and model-space states. Finally, artifacts affecting the quality of electronic structure calculations such as spin contamination are also discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Solution phase high repetition rate laser pump x-ray probe picosecond hard x-ray spectroscopy at the Stanford Synchrotron Radiation Lightsource

We present a dedicated end-station for solution phase high repetition rate (MHz) picosecond hard x-ray spectroscopy at beamline 15-2 of the Stanford Synchrotron Radiation Lightsource. A high-power ultrafast ytterbium-doped fiber laser is used to photoexcite the samples at a repetition rate of 640 kHz, while the data acquisition operates at the 1.28 MHz repetition rate of the storage ring recording data in an alternating on-off mode. The time-resolved x-ray measurements are enabled via gating the x-ray detectors with the 20 mA/70 ps camshaft bunch of SPEAR3, a mode available during the routine operations of the Stanford Synchrotron Radiation Lightsource. As a benchmark study, aiming to demonstrate the advantageous capabilities of this end-station, we have conducted picosecond Fe K-edge x-ray absorption spectroscopy on aqueous [FeII(phen)3]2+, a prototypical spin crossover complex that undergoes light-induced excited spin state trapping forming an electronic excited state with a 0.6–0.7 ns lifetime. In addition, we report transient Fe Kβ main line and valence-to-core x-ray emission spectra, showing a unique detection sensitivity and an excellent agreement with model spectra and density functional theory calculations, respectively. Notably, the achieved signal-to-noise ratio, the overall performance, and the routine availability of the developed end-station have enabled a systematic time-resolved science program using the monochromatic beam at the Stanford Synchrotron Radiation Lightsource.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Diffusion energy barrier of Au on Bi 2 Se 3 : theory and experiment

The stability and diffusion of ultra-thin thermally deposited Au films on Bi 2 Se 3 was studied using scanning tunneling microscopy and density functional theory calculations. The Au/Bi 2 Se 3 interface is of interest as gold is predicted to provide excellent electrical contact while maintaining the spin-polarized characteristics of the electronic states in Bi 2 Se 3 that make the material attractive for spintronic applications. When deposited at room temperature, Au 10 covers the surface with tightly packed islands of nanometer scale dimension. The surface morphology is stable up to 400K. At this annealing temperature, Au atoms have sufficient energy to diffuse across the surface and aggregate into larger nanostructures. At 550K, the Bi 2 Se 3 surface is only sparsely covered, and the Au has formed clusters with length scales 5-10 times larger than the original islands formed at room temperature. Comparison of the experiment and first principle calculation lead to the conclusion that the diffusion energy barrier for Au on Bi 2 Se 3 is as high as 0.47 eV, 15 which is much larger than diffusion barriers on other van der Waals materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Stabilization of magnetic bubbles in [Ni/Co]n multilayers on an oxygen-reconstructed Nb(110) surface via an ultra-thin Cu interlayer

Magnetic thin films hosting topological spin textures, such as magnetic skyrmions, hold high potential for breakthroughs in the field of spintronics, due to good scalability and energy efficiency. Novel computational architectures such as memory-in-logic devices rely on material platforms able to host those topological spin textures. Furthermore, recently proposed designs of novel quantum information technologies are based on heterostructures where topological spin textures are in direct proximity to a superconducting layer. Here, we demonstrate the stabilization of out-of-plane magnetic bubbles in highly ordered [Ni/Co]n multilayers on a Nb(110) single crystal. This is achieved without the need for the removal of the well-known Nb(110)-oxide surface reconstruction, due to the introduction of an ultra-thin Cu interlayer in between the Nb substrate and the magnetic multilayer. The Cu interlayer generates a well-ordered hexagonal surface, which is key for the epitaxial growth of the [Ni/Co]n multilayers hosting the desired out-of-plane anisotropy. The magnetic ground state of the prepared material stacks is directly imaged via spin-polarized low-energy electron microscopy, revealing the presence of magnetic bubble domains with lateral sizes as small as 450 nm.

Dibajeh, Ahmad↗
DOE OSTI2026

Searching for axion dark matter with array-scalable single magnon detectors

We introduce an array-scalable, magnon-based detector to search for the spin-dependent interactions of electron-coupled axion dark matter with mass in the 1−100 μ⁢eV range. These axions can excite single magnons in magnetic targets, such as yttrium iron garnet (YIG) spheres, which are subsequently sensed by the detector. In our concept, this sensing is implemented by coupling the magnons in the YIG spheres to magnetic-field-resilient single-electron charge-qubits, whose state is then interrogated with a quantum nondemolition measurement. Using standard superconducting fabrication techniques, it is possible to integrate many YIG sphere-qubit sensors, forming a large detector array. We outline the detector design and operation for our concept, and determine its sensitivity to axion dark matter. We find that using available technology can already exceed the sensitivity of previous ferromagnetic haloscopes, and further improvements in performance would search for electron-coupled axion dark matter in unexplored parameter space.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2026

Relativistic Exact Two-Component Theory in the Generalized Pseudospectral Representation

We present a formulation and implementation of exact two-component (X2C) relativistic theory in the generalized pseudospectral representation. When combined with the Hartree-Fock-Slater framework, this approach enables efficient and accurate treatments of scalar-relativistic and spin-orbit effects in atomic electronic structures without the computational overhead of four-component methods. Benchmark calculations across light and heavy elements demonstrate that the our X2C scheme yields substantially more accurate relativistic corrections to core-electron binding energies than perturbational Breit-Pauli treatments while converging more rapidly with respect to basis size. The method provides an improved computational framework for modeling ultrafast x-ray-induced processes in heavy-element systems.

Wang, Xubo↗