Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “drawing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Integration of first-principles methods and crystallographic database searches for new ferroelectrics: Strategies and explorations

In this concept paper, the development of strategies for the integration of first-principles methods with crystallographic database mining for the discovery and design of novel ferroelectric materials is discussed, drawing on the results and experience derived from exploratory investigations on three different systems: (1) the double perovskite Sr(Sb{sub 1/2}Mn{sub 1/2})O{sub 3} as a candidate semiconducting ferroelectric; (2) polar derivatives of schafarzikite MSb{sub 2}O{sub 4}; and (3) ferroelectric semiconductors with formula M{sub 2}P{sub 2}(S,Se){sub 6}. A variety of avenues for further research and investigation are suggested, including automated structure type classification, low-symmetry improper ferroelectrics, and high-throughput first-principles searches for additional representatives of structural families with desirable functional properties. - Graphical abstract: Integration of first-principles methods with crystallographic database mining, for the discovery and design of novel ferroelectric materials, could potentially lead to new classes of multifunctional materials. Highlights: Black-Right-Pointing-Pointer Integration of first-principles methods and database mining. Black-Right-Pointing-Pointer Minor structural families with desirable functional properties. Black-Right-Pointing-Pointer Survey of polar entries in the Inorganic Crystal Structural Database.

36 MATERIALS SCIENCE↗

Synthesis and crystal structures of new oxyapatites BiCa{sub 4-x}La{sub x}(VO{sub 4}){sub 3-x}(GeO{sub 4}){sub x}O, x=1-3

New germanate-vanadates with the general formula BiCa{sub 4-x}La{sub x}(VO{sub 4}){sub 3-x}(GeO{sub 4}){sub x}O, x=1-3, have been synthesized by the nitrate-citrate method and characterized. Structural refinement based on X-ray powder diffraction data showed that these compounds are isostructural with BiCa{sub 4}(VO{sub 4}){sub 3}O (space group P6{sub 3}/m (N 176), Z=2, a=9.8327-9.8755(3), and c=7.1203-7.2133(2) ). They may be viewed as continuous series of solid solutions where Ca{sup 2+} and V{sup 5+} cations in the crystal lattice of vanadate BiCa{sub 4}(VO{sub 4}){sub 3}O are replaced by La{sup 3+} and Ge{sup 4+} cations. In the process of substitution, the La{sup 3+} cations occupy mainly the 4f lattice sites of the germanate-vanadate oxyapatites, but the filling of the 4f and 6h lattice sites in the germanate BiCaLa{sub 3}(GeO{sub 4}){sub 3} is equivalent. IR and Raman spectra were studied. The Raman spectra clearly show a two-mode behavior: the lines of GeO{sub 4} and VO{sub 4} are separated from each other, and the (V/Ge)O{sub 4} tetrahedra exhibit a quasi-independent behavior. - Graphical abstract: Schematic drawing of the BiCa{sub 3}La(VO{sub 4}){sub 2}(GeO{sub 4})O structure in projection on the ac plane. Green-V and Ge, red-Ca(1) and La(1), yellow-Ca(2), La(2) and Bi, dark-blue-O(1)-O(4), blue-O(5). Highlights: Black-Right-Pointing-Pointer The citrate synthesis of germanate-vanadate oxyapatites. Black-Right-Pointing-Pointer The synthesized compounds crystallize in the hexagonal symmetry. Black-Right-Pointing-Pointer A single series of solid solutions BiCa{sub 4-x}La{sub x}(VO{sub 4}){sub 3-x}(GeO{sub 4}){sub x}O, (x=0-3). Black-Right-Pointing-Pointer IR an Raman spectra of mixed crystals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Redetermination of the structure of ALa₂WO₇ (A=Ba, Sr) with fluorite-like metal ordering

The crystal structures of ALa₂WO₇ (A=Ba, and Sr) at room temperature were re-determined by the Rietveld method using the combined X-ray and neutron powder diffraction data. The compounds are confirmed to be isomorphic, crystallizing in the space group P112₁/b. In ALa₂WO₇ the ordering of metal atoms is fluorite-like, but it differs from that of the fluorite-defect compounds of the formula Ln₃MO₇ (Ln=lanthanide or Y, M=pentavalent metal). The structure of ALa₂WO₇ consists of isolated WO₆ octahedra, whereas in the normal Ln₃MO₇ the MO₆ octahedra share corners forming one-dimensional chains. Although ALa₂WO₇ has a centric space group, La ions are not situate at the centre of symmetry, which explains the ⁵D₀→⁷F₂ transition being dominant in emission spectrum of Eu-doped materials. - Graphical abstract: Schematic drawing of the crystal structures of ALa₂WO₇ (A=Ba, Sr) (left) and Ln₃MO₇ (right) showing the different arrangement of metal octahedra. Note that the example of Ln₃MO₇ is the structure of La₃TaO₇ with the space group Cmcm. Highlights: • The structural ambiguity of BaLa₂WO₇ has been resolved. • The details of the crystal structure of SrLa₂WO₇ are reported for the first time. • ALa₂WO₇ (A=Ba, Sr) closely resemble β-La₃RuO₇ and one of the La₃IrO₇ polymorph.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electron diffraction and high-resolution electron microscopy studies on layered Li{sub 2−δ}(Mn{sub 1−x}Co{sub x}){sub 1+δ}O{sub 3}

The structure of Li{sub 2}MnO{sub 3}–LiCoO{sub 2} solid solutions or Li{sub 2−δ}(Mn{sub 1−x}Co{sub x}){sub 1+δ}O{sub 3} (LMCO) which are promising lithium-battery cathodes was studied by high-resolution electron microscopy (HREM). X-ray diffraction (XRD) analyses indicate that Li{sub 1.6}Mn{sub 0.2}Co{sub 1.2}O{sub 3} and Li{sub 1.7}Mn{sub 0.4}Co{sub 0.9}O{sub 3} take a rhombohedral (R3-bar m space group) structure, whereas Li{sub 1.85}Mn{sub 0.7}Co{sub 0.45}O{sub 3} and Li{sub 1.95}Mn{sub 0.9}Co{sub 0.15}O{sub 3} take a monoclinic (C2/m) superstructure. HREM studies on those samples reveal that all of the observed crystallites in sample Li{sub 1.95}Mn{sub 0.9}Co{sub 0.15}O{sub 3} contain sharp stripe structures due to the planar defects along the c{sub h}-axis (stacking direction of the hexagonal close-packed planes) of parent rhombohedral R3-bar m cell. Such stripe structures become faint with increasing x, Co content. The origin of the planar defects is mainly attributed not to the different structures but to the different local orientations of the monoclinic LMCO. Local disordering of Li and (Mn,Co) in (Li,Mn,Co) planes is developed with increasing x and the structures are transformed from C2/m to R3-bar m. The alternative (Li,Mn,Co)-plane stacking structure, trigonal P3{sub 1}12 LMCO, was occasionally observed. However, only P3{sub 1}12 LMCO platelets with a thickness of a single unit cell were detected. - Graphical abstract: An HREM image for Li{sub 1.95}(Mn{sub 0.9}Co{sub 0.15})O{sub 3} and schematic drawings of C2/m and P3{sub 1}12 Li{sub 2}MnO{sub 3} projected along the various zone axes. Each projected unit cell is indicated by rectangles and parallelograms . - Highlights: • Li{sub 2−δ}(Mn{sub 1−x}Co{sub x}){sub 1+δ}O{sub 3} was studied by high-resolution electron microscopy (HREM). • HREM studies revealed a large amount of planar defects in C2/m Li{sub 1.95}Mn{sub 0.9}Co{sub 0.15}O{sub 3}. • The origin of the defects is the different local orientations of the C2/m platelets. • P3{sub 1}12 platelets with only single unit cell sequence were detected.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polycrystalline Mg{sub 2}Si thin films: A theoretical investigation of their electronic transport properties

The electronic structures and thermoelectric properties of a polycrystalline Mg{sub 2}Si thin film have been investigated by first-principle density-functional theory (DFT) and Boltzmann transport theory calculations within the constant-relaxation time approximation. The polycrystalline thin film has been simulated by assembling three types of slabs each having the orientation (001), (110) or (111) with a thickness of about 18 Å. The effect of applying the relaxation procedure to the thin film induces disorder in the structure that has been ascertained by calculating radial distribution functions. For the calculations of the thermoelectric properties, the energy gap has been fixed at the experimental value of 0.74 eV. The thermoelectric properties, namely the Seebeck coefficient, the electrical conductivity and the power factor, have been determined at three temperatures of 350 K, 600 K and 900 K with respect to both the energy levels and the p-type and n-type doping levels. The best Seebeck coefficient is obtained at 350 K: the S{sub yy} component of the tensor amounts to about ±1000 μV K{sup −1}, depending on the type of charge carriers. However, the electrical conductivity is much too small which results in low values of the figure of merit ZT. Structure–property relationship correlations based on directional radial distribution functions allow us to tentatively draw some explanations regarding the anisotropy of the electrical conductivity. Finally, the low ZT values obtained for the polycrystalline Mg{sub 2}Si thin film are paralleled with those recently reported in the literature for bulk chalcogenide glasses. - Graphical abstract: Structure of the polycrystalline thin film of Mg{sub 2}Si. - Author-Highlights: • Polycrystalline Mg{sub 2}Si film has been modelled by DFT approach. • Thermoelectric properties have been evaluated by semi-classical Boltzmann theory. • The structure was found to be slightly disordered after relaxation. • The highest value of Seebeck coefficient reaches −1000 μV/K at 350 K. • The ZT value is estimated between 0.0175 at 350 K and 0.2 at 900 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of short-range order on microstructure, texture and strain hardening of cold drawn Cu-10 at.%Mn alloy

Highlights: • Excluding the effect of stacking fault energy, short-range order effect is discussed solely. • Short-range order is beneficial for twinning and slip planarity. • Short-range order promotes the formation of <111> fiber texture. • Strain hardening improving by short-range order. - Abstract: The aim of the present study is to investigate the effect of short-range order (SRO) on the microstructural evolution and mechanical property of Cu-10 at.%Mn alloy during cold drawing deformation. Characterization of the cold drawn Cu-10 at.%Mn alloy samples were performed using transmission electron microscope (TEM) and electron back scattering diffraction (EBSD), and their hardness were also tested. The results show that SRO is beneficial for both twinning and the transition of dislocation glide from wavy slip to planar slip at the low strains. At the high strains, the wavy slip generates due to the destruction of SRO. SRO increases the volume fraction of <111> texture component and the critical strain threshold. Moreover, the presence of SRO significantly improves strain hardening by combining the effects of dislocation, deformation twinning and texture hardening, which results in a significant increase of hardness.

36 MATERIALS SCIENCE↗

Statistical characterization of twin transmission across grain boundaries in magnesium

Here, a detailed statistical analysis of twin transmission (TT) across grain boundaries is performed in rolled, commercial purity magnesium compressed along the rolling direction. EBSD images are acquired from two different cuts: a section containing the rolling (RD) and normal (ND) directions; and a section at 35° to the ND which contains transverse direction (TD). An automated twinning analysis software, METIS, is used to obtain the statistical correlations between deformation twins and other microstructural features by analyzing EBSD microstructures comprising thousands of grains and twins. This detailed statistical analysis reveals that the TT propensity is sensitive to the grain boundary (GB) misorientation angle but not to the GB misorientation axis. Specifically, TT propensity decreases with increasing GB misorientation angle; however, the decreasing trend is not monotonic. Further, the detailed analysis of TT events combining macroscopic Schmid factor and the geometric measures (m’: accounts for the alignment of both twin plane normal and shear directions; m”: accounts for the alignment of only twin shear directions; and m”’: accounts for the alignment of only twin plane normal) helps in understanding and identifying the process of twin-pair formation, i.e., co-nucleation versus transmission, also to identify the role of local stresses at GBs induced by inter-grain interaction versus twinning shear transformation processes. In addition, Bayesian inference is used to draw statistically meaningful conclusions as to the likelihood of transmission given misorientation angles. Lastly, twin chain frequency as a function of chain length is predicted using the probability distribution obtained from the Bayesian inference and compared with the actual data from the EBSD microstructures.

36 MATERIALS SCIENCE↗

Wood-reinforced composites by stereolithography with the stress whitening behavior

In this study, poplar wood flour at various concentrations (1–10 wt%) is incorporated into a methacrylate-based resin via solution blending to fabricate wood-reinforced composites using stereolithography apparatus (SLA) 3D printing. Differential scanning calorimetry (DSC) along with Fourier transform infrared spectroscopy (FTIR) analysis shows the presence of a small amount of residual monomer in the printed samples. For the printed composites, the glass transition temperature (T g ) from dynamic mechanical analysis (DMA) decreases as more wood flour is incorporated, which indicates an increase in free volume occupied by polymer chains. The tensile strength is improved up to 17.3% from 21.1 MPa (no wood flour) to 24.7 MPa (1.0 wt% wood flour). The highest Young’s modulus reaches 323.8 MPa (2.0 wt% wood flour), which is 1.9-fold of that of the sample without wood flour. Moreover, the composites show “stress whitening” with the addition of wood flour during the uniaxial drawing. Morphology analysis of the tested samples show that the formation of microcraze and microvoids likely causing the stress whitening. This is the first study that demonstrates wood flour can be utilized in SLA 3D printed wood plastic composites (WPC) which can reinforce the printed products with a modest loading amount.

36 MATERIALS SCIENCE↗

Thermal stability and transport studies of (100 - 2x)TeO{sub 2}-xAg{sub 2}O-xWO{sub 3} (7.5 {<=} x {<=} 30) glass system

Graphical abstract: Typical modulated DSC (NRHF and C{sub p}) results during a heating scan in the 85TeO{sub 2}-7.5Ag{sub 2}O-7.5WO{sub 3} glass sample. Research highlights: {yields} The addition of equal mol% of WO{sub 3} and Ag{sub 2}O to TeO{sub 2} increases the thermal stability. {yields} The 55TeO{sub 2}-22.5WO{sub 3}-22.5Ag{sub 2}O shows the highest thermal stability ({Delta}T = 237 {sup o}C). {yields} These glasses are more useful for drawing of optical fibers. {yields} The present glass system shows higher conductivity. -- Abstract: Differential scanning calorimetry (DSC), infrared (IR) and direct current (DC) conductivity studies have been carried out on (100 - 2x)TeO{sub 2}-xAg{sub 2}O-xWO{sub 3} (7.5 {<=} x {<=} 30) glass system. The IR studies show that the structure of glass network consists of [TeO{sub 4}], [TeO{sub 3}]/[TeO{sub 3+1}], [WO{sub 4}] units. Thermal properties such as the glass transition (T{sub g}), onset crystallization (T{sub o}), thermal stability ({Delta}T), glass transition width ({Delta}T{sub g}), heat capacities in the glassy and liquid state (C{sub pg} and C{sub pl}), heat capacity change ({Delta}C{sub p}) and ratios C{sub pl}/C{sub pg} of the glass systems were calculated. The highest thermal stability (237 {sup o}C) obtained in 55TeO{sub 2}-22.5Ag{sub 2}O-22.5WO{sub 3} glass suggests that this new glass may be a potentially useful candidate material host for rare earth doped optical fibers. The DC conductivity of glasses was measured in temperature region 27-260 {sup o}C, the activation energy (E{sub act}) values varied from 1.393 to 0.272 eV and for the temperature interval 170-260 {sup o}C, the values of conductivity ({sigma}) of glasses varied from 8.79 x 10{sup -9} to 1.47 x 10{sup -6} S cm{sup -1}.

36 MATERIALS SCIENCE↗

Green synthesis of silver nanoparticles from aqueous Aegle marmelos leaf extract

Graphical abstract: Silver nanoparticles capped with polyphenols present in Aegle marmelos leaf extract. Display Omitted Highlights: ► Silver nanoparticles are synthesized using Aegle marmelos leaf extract in aqueous media. ► Reduction reaction is fast and occurs at room temperature. ► The presence of polyphenols acts as in situ capping agent. -- Abstract: Synthesis of nanoparticles by green route is an emerging technique drawing more attention recently because of several advantages over the convention chemical routes. The present study reports one-pot synthesis and in situ stabilization of silver nanoparticles using Aegle marmelos leaf extract. Nanoparticles of almost uniform spherical size (∼60 nm) were synthesized within ∼25 min reaction time at room temperature. The size of particles depends on the ratio of AgNO{sub 3} and leaf extract. The crystallinity, size, and shape of the nanoparticles were characterized by X-ray diffraction, dynamic light scattering, and scanning electron microscopy respectively. The size stability was attained by the capping effect of polyphenolic tannin compound, procatacheuate in the extract. The capped polyphenols can be removed from the particle surface by simple NaOH/methanol wash. The involvement of phenolic compounds in metal ion reduction and capping were supported by UV–visible spectroscopy, infrared spectroscopy, high performance liquid chromatography, and zeta potential measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

SeTe alloy semiconductor core optical fibers

Highlights: • Phosphate glass-clad Se{sub 0.5}Te{sub 0.5} semiconductor core optical fibers were fabricated. • Crystalline Se{sub 0.5}Te{sub 0.5} semiconductor core optical fibers were successfully obtained. • The fibers can detect light incident on it from at any point along its entire length. • The fibers can be used as stress sensing without the use of optical probing signals. - Abstract: Se{sub 0.5}Te{sub 0.5} semiconductor core optical fibers with phosphate glass cladding were fabricated by using a reactive molten core approach. The core was found to be amorphous with some oxygen diffusing in from the cladding glass. Crystalline Se{sub 0.5}Te{sub 0.5} (c-Se{sub 0.5}Te{sub 0.5}) semiconductor core fibers were obtained by a post-drawing annealing process. Significant disparities in conductivity under stress and without stress were observed in c-Se{sub 0.5}Te{sub 0.5} semiconductor core fibers. To the best of our knowledge, this is the first time that stress sensing can be realized in c-Se{sub 0.5}Te{sub 0.5} semiconductor core optical fibers. This is in contrast to all previous work on stress sensing using fibers, which require the use of optical probing signals. In addition, it is found that more than 60 times change in conductivity between dark and illuminated states in c-Se{sub 0.5}Te{sub 0.5} semiconductor core fibers. These results demonstrate that c-Se{sub 0.5}Te{sub 0.5} semiconductor core optical fibers have promising applications in stress sensor, photodetector, and optical switch.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mn4+/Zn2+:YAG glass ceramic for light emitting devices

Highlights: • Luminescence of Mn{sup 4+}:YAG red phosphor was enhanced via Zn{sup 2+} doping. • Mn{sup 4+}/Zn{sup 2+}:YAG GC was successfully prepared via one-step low temperature co-sintering technique. • A series of lighting device was achieved by coupling the Mn{sup 4+}/Zn{sup 2+}:YAG GC with the commercial blue chips and Ce{sup 3+}:LuAG GC. - Abstract: The rare-earth-free Mn{sup 4+}-activated oxide red phosphors draw great attention for their potential applications in the field of light-emitting diodes (LEDs). In this work, the red-emitting Mn{sup 4+}/Zn{sup 2+}:Y{sub 3}Al{sub 5}O{sub 12} phosphor, showing strong red emission peaked at ∼ 672 nm as a result of the spin-forbidden {sup 2}E{sub 2g} → {sup 4}A{sub 2g} electron transition of Mn{sup 4+} ions under 478 nm excitation, was synthesized by a traditional solid-state reaction route in air. The microstructure and luminescent performance of this red-emission phosphor was investigated in detail. From the experimentally measured spectroscopic data, the crystal field strength (Dq) and the Racah parameters B and C were calculated, respectively. In addition, Zn{sup 2+} dopant was found to be beneficial for enhancing Mn{sup 4+} luminescence. Subsequently, Mn{sup 4+}/Zn{sup 2+}:YAG glass ceramic was successfully prepared via using Mn{sup 4+}/Zn{sup 2+}:YAG phosphors incorporated into tellurate glass. A tunable lighting device was successfully achieved by coupling the red-emitting Mn{sup 4+}/Zn{sup 2+}:YAG GC with the commercial blue chips and Ce{sup 3+}:Lu{sub 3}Al{sub 5}O{sub 12} GC.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dual-step photocarrier injection by mixture layer of ZnO QDs and MoS 2 NPs on hybrid PdAu NPs

Hybrid UV-photodetector (PD) design consisted of various compatible nano-material systems are drawing significant research interests due to their improved device tunability and functionality. A hybrid ZnO–MoS 2 /HNP UV-PD design is demonstrated by the mixture layer of zinc oxide (ZnO) quantum dot (QD) and molybdenum di-sulfate (MoS 2 ) nanoparticles (NPs) on the plasmonic hybrid PdAu NP template. The proposed design exhibits an excellent photocurrent of 1.45×10 -3 A under the 54.9 mW/mm2 at ± 10 V due to a dual step enhancement of photo-carrier injection. It then leads to the significantly improved performance factors of photo-responsivity 1430 mA/mm 2 and detectivity 4.50 × 10 10 jones at 0.34 mW/mm 2 . The rise time (T r ) and fall time (T f ) of 3.37 and 0.35 s are obtained for the ZnO–MoS 2 /HNP PD. Finally, the demonstrated performance factors indicate that the hybrid ZnO–MoS 2 /HNP UV-PD platform is one of the best UV-PDs as summarized in Table 1.

36 MATERIALS SCIENCE↗

Conductive nanolamellar Cu/martensite wire with high strength

Cu wires can be greatly strengthened without losing much conductivity if a continuous nanolamellar structure with Cu and a strong second constituent is achieved. Here, we report on a nanolamellar Cu/steel wire fabricated by repetitive hot-pressing, forging, rolling and subsequent wire drawing. Austenization and quenching in liquid nitrogen resulted in a Cu/martensite structure, exhibiting tensile strength of 1220 MPa. The electrical conductivity of the wire was measured to be about 60% International Annealed Copper Standard (IACS), which was comparable with Cu/Fe fabricated by alloying and casting. In situ tensile tests under high energy X-ray diffraction were utilized to explore the deformation behavior of the wire. It was discovered that the martensite carried about 60% of the load, accounting for the high strength.

36 MATERIALS SCIENCE↗

Protein markers for identification of Yersinia pestis and their variation related to culture

The detection of high consequence pathogens, such as Yersinia pestis, is well established in biodefense laboratories for bioterror situations. Laboratory protocols are well established using specified culture media and a growth temperature of 37 °C for expression of specific antigens. Direct detection of Y. pestis protein markers, without prior culture, depends on their expression. Unfortunately protein expression can be impacted by the culture medium which cannot be predicted ahead of time. Furthermore, higher biomass yields are obtained at the optimal growth temperature (i.e. 28 °C–30 °C) and therefore are more likely to be used for bulk production. Analysis of Y. pestis grown on several types of media at 30 °C showed that several protein markers were found to be differentially detected in different media. Analysis of the identified proteins against a comprehensive database provided an additional level of organism identification. Peptides corresponding to variable regions of some proteins could separate large groups of strains and aid in organism identification. This work illustrates the need to understand variability of protein expression for detection targets. The potential for relating expression changes of known proteins to specific media factors, even in nutrient rich and chemically complex culture medium, may provide the opportunity to draw forensic information from protein profiles.

59 BASIC BIOLOGICAL SCIENCES↗

Standardization of Head and Neck Contouring Using the Acanthiomeatal Line

The purpose of this study was to determine the perceived and actual chin position(s) used for radiotherapy of head-and-neck cancers in a variety of clinical settings. Dosimetrists were asked to describe the external landmarks used to set the chin position. The lateral treatment planning radiographic figures in Ang's textbook, Radiotherapy for Head and Neck Cancers: Indications and Techniques, were analyzed for chin position by drawing a horizontal line from the tip of the chin to the cervical spine. The physicians at 7 departments were asked to rate the chin positions used in their departments for head-and-neck simulations. Choices included: (1) mildly flexed, (2) neutral, (3) mildly extended, and (4) hyperextended. In addition, each center was asked to select 2 representative cases to show routine chin position. The dosimetrists fixed the chin in neutral position by placing a virtual plane defined by 3 points (the base of the nasal septum [acanthus] and the external auditory canals) perpendicular to the table top. The type of head holder was irrelevant. Eighty-two percent (31/38) of the figures in Ang's text showed positioning in the neutral position (tip of the chin intersected the cervical spine between C2-3/C3-4). Most (71.4%) of the radiotherapists thought their patients were treated in the hyperextended neck position but, in fact, 85.7% (12/14) of the simulations showed a neural neck position. Reproducible chin positioning can be obtained by using the acanthiomeatal line. Consistent use of this technique will create a uniformly positioned set of axial co-images that have consistent appearance of avoidance and lymphatic areas. This will simplify contouring on axial computed tomography (CT) images of the neck. Standardizing the chin position is an important step to developing a standardized atlas and developing an information tool for automated contouring.

61 RADIATION PROTECTION AND DOSIMETRY↗

Proton Range Uncertainty Due to Bone Cement Injected Into the Vertebra in Radiation Therapy Planning

We wanted to evaluate the influence of bone cement on the proton range and to derive a conversion factor predicting the range shift by correcting distorted computed tomography (CT) data as a reference to determine whether the correction is needed. Two CT datasets were obtained with and without a bone cement disk placed in a water phantom. Treatment planning was performed on a set of uncorrected CT images with the bone cement disk, and the verification plan was applied to the same set of CT images with an effective CT number for the bone cement disk. The effective CT number was determined by measuring the actual proton range with the bone cement disk. The effects of CT number, thicknesses, and position of bone cement on the proton range were evaluated in the treatment planning system (TPS) to draw a conversion factor predicting the range shift by correcting the CT number of bone cement. The effective CT number of bone cement was 260 Hounsfield units (HU). The calculated proton range for native CT data was significantly shorter than the measured proton range. However, the calculated range for the corrected CT data with the effective CT number coincided exactly with the measured range. The conversion factor was 209.6 [HU . cm/mm] for bone cement and predicted the range shift by approximately correcting the CT number. We found that the heterogeneity of bone cement could cause incorrect proton ranges in treatment plans using CT images. With an effective CT number of bone cement derived from the proton range and relative stopping power, a more actual proton range could be calculated in the TPS. The conversion factor could predict the necessity for CT data correction with sufficient accuracy.

61 RADIATION PROTECTION AND DOSIMETRY↗

Improved manufacturability of vacuum thermoforming molds by segmentation

Thin polymer shell components used in consumer goods, the automotive industry, and marine applications are often produced by thermoforming. Depending on the quantity of parts, molding processes can increase throughput significantly when compared to processes such as milling or additive manufacturing. One disadvantage to mold-based manufacturing methods, however, is that molds must be produced to form the required geometry. Mold production is often complex and requires a large capital investment. For large-scale molding processes, mold production is sometimes complicated by the requirement for large working volume machine tools which are capable of machining the cavities to the appropriate tolerances for the selected molding process. Here, this paper focuses on a segmented design for a large draw ratio (>3:1 molded surface area to sheet surface area) thermoforming mold and a cost-benefit analysis of segmentation versus monolithic design. Discussion of the thermoforming tests are included. The primary goals were to improve manufacturability and reduce the overall cost of the mold.

Manufacturability↗