Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “distributed state estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Measurements of the Higgs boson inclusive and differential fiducial cross-sections in the diphoton decay channel with pp collisions at $\sqrt{s}$ = 13 TeV with the ATLAS detector

A measurement of inclusive and differential fiducial cross-sections for the production of the Higgs boson decaying into two photons is performed using 139 fb –1 of proton-proton collision data recorded at $\sqrt{s}$ = 13 TeV by the ATLAS experiment at the Large Hadron Collider. The inclusive cross-section times branching ratio, in a fiducial region closely matching the experimental selection, is measured to be 67 ± 6 fb, which is in agreement with the state-of-the-art Standard Model prediction of 64 ± 4 fb. Extrapolating this result to the full phase space and correcting for the branching ratio, the total cross-section for Higgs boson production is estimated to be 58 ± 6 pb. In addition, the cross-sections in four fiducial regions sensitive to various Higgs boson production modes and differential cross-sections as a function of either one or two of several observables are measured. All the measurements are found to be in agreement with the Standard Model predictions. The measured transverse momentum distribution of the Higgs boson is used as an indirect probe of the Yukawa coupling of the Higgs boson to the bottom and charm quarks. In addition, five differential cross-section measurements are used to constrain anomalous Higgs boson couplings to vector bosons in the Standard Model effective field theory framework.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Application of Sequential Design of Experiments (SDoE) to Large Pilot-Scale Solvent-Based CO2 Capture Process at Technology Centre Mongstad (TCM)

The United States Department of Energy’s Carbon Capture Simulation for Industry Impact (CCSI2) program has developed a framework for sequential design of experiments (SDoE) that aims to maximize knowledge gained from budget- and schedule-limited pilot scale testing. SDoE was applied to the planning and execution of campaigns for testing CO2 capture systems at pilot-scale in order to optimally allocate resources available for the testing. In this methodology, a stochastic process model is developed by quantifying the parametric uncertainty in submodels of interest; for a solvent-based CO2 capture system, these may include physical properties and equipment performance submodels (e.g., mass transfer, interfacial area). This uncertainty is propagated through the full process model, over variable operating conditions, for estimating the resulting uncertainty in key model outputs (e.g., percentage of CO2 capture, solvent regeneration energy requirement). In developing a data collection plan, the predicted output uncertainty is incorporated into an algorithm that seeks simultaneously to select process operating conditions for which the predicted uncertainty is relatively high and to ensure that the entire space of operation is well represented. This test plan is then used to guide operation of the pilot plant at varying steady-state conditions, with resulting process data incorporated into the existing model using Bayesian inference to refine parameter distributions. The updated stochastic model, with reduced parametric uncertainty from data collected, is then used to guide additional data collection, thus the sequential nature of the experimental design. The SDoE process was implemented at the pilot test unit (12 MWe in scale) at Norway’s Technology Centre Mongstad (TCM) in a summer 2018 test campaign with aqueous monoethanolamine (MEA). During the test campaign, the varied operating conditions included the flowrates of circulated solvent, flue gas, and reboiler steam and the CO2 concentration in the flue gas. The process data were used to update probability distributions of mass transfer and interfacial area parameters of a stochastic process model developed by the CCSI2 team. Two iterations of the SDoE process were executed, resulting in the uncertainty in model predicted CO2 capture percentage decreasing by an average of 58.0 ± 4.7% over the full input space of interest. This work demonstrates the potential of the SDoE process for model refinement through reduction in process model parametric uncertainty, and ultimately risk in scale-up, in CO2 capture technology performance.

carbon capture↗
NASA NTRS2017

Answering the Call for Model-Relevant Observations of Aerosols and Clouds

We describe a technique for combining multiple A-Train aerosol data sets, namely MODIS spectral AOD (aerosol optical depth), OMI AAOD (absorption aerosol optical depth) and CALIOP aerosol backscatter retrievals (hereafter referred to as MOC retrievals) to estimate full spectral sets of aerosol radiative properties, and ultimately to calculate the 3-D distribution of direct aerosol radiative effects (DARE). We present MOC results using almost two years of data collected in 2007 and 2008, and show comparisons of the aerosol radiative property estimates to collocated AERONET retrievals. We compare the spatio-temporal distribution of the MOC retrievals and MOC-based calculations of seasonal clear-sky DARE to values derived from four models that participated in the Phase II AeroCom model intercomparison initiative. Comparisons of seasonal aerosol property to AeroCom Phase II results show generally good agreement best agreement with forcing results at TOA is found with GMI-MerraV3.We discuss the challenges in making observations that really address deficiencies in models, with some of the more relevant aspects being representativeness of the observations for climatological states, and whether a given model-measurement difference addresses a sampling or a model error.

Redemann, J.↗
DOE OSTI2024

WIND Toolkit Long-Term Ensemble Dataset

WIND Toolkit Long-term Ensemble Dataset (WTK-LED), an updated version of the meteorological WIND Toolkit, is a meteorological dataset providing high-resolution time series, including interannual variability and model uncertainty of wind speed at every modeling grid point to indicate ranges of possible wind speeds. The data were produced using the Weather Research and Forecasting Model (WRF). The vertical grid used in WTK-LED includes many vertical layers in the atmospheric boundary layer to provide information of atmospheric quantities across the rotor layer of utility scale and distributed wind turbines. The WTK-LED includes: (1) Numerical simulations of wind speed and other meteorological variables covering the contiguous United States (CONUS) and Alaska, with high-resolution (5-minute [min], 2-kilometer [km]) data for 3 years (2018-2020): WTK-LED CONUS, WTK-LED Alaska. (2) Climate simulations from Argonne National Laboratory covering North America, including Alaska, Canada, and most of Mexico and the Caribbean islands. These simulations complement the new WTK-LED to offer a 4-km, hourly dataset covering 20 years (2001-2020): WTK-LED Climate. (3) Specific long-term, high-resolution offshore simulations have been conducted separately for the U.S. coasts, Hawaii, and the Great Lakes, leading to the 2023 National Offshore Wind dataset: NOW-23. The data for Hawaii include land-based data and are part of WTK-LED Hawaii. Because the accuracy of simulations from a mesoscale model, such as WRF, varies depending on the location and weather situation, and can reach up to several m/s for wind speed, we provide simulated wind speed uncertainty estimates to the community to be used in conjunction with the deterministic model simulations. This dataset was developed to satisfy a wide group of stakeholders across various wind energy disciplines, including but not limited to stakeholders in the distributed and utility scale wind industry, the new emerging airborne wind energy field, grid integration, power systems modeling, environmental modeling, and researchers in academia, and to close some of the gaps that current public datasets have. Based on our validation results to date, we suggest use cases and applications for each dataset of the WTK-LED as shown in "WTK-LED Use Cases" resource below.

Array↗
DOE OSTI2024

The health, climate, and equity benefits of freight truck electrification in the United States

Abstract Long-haul freight shipment in the United States relies on diesel trucks and constitutes ∼3% of U.S. greenhouse gas emissions and a significant share of local air pollution. Here, we compare the climate and air pollution-related health damages from electric versus diesel long-haul truck fleets. We use truck commodity flows to estimate tailpipe emissions from diesel trucks and regional grid emissions intensities to estimate charging emissions from electric trucks under various grid scenarios. We use a reduced complexity air quality model combined with valuation of air pollution-related premature deaths (using two hazard ratios (HRs)) and quantify the distributional health impacts in different scenarios. We find that annual health and climate costs of the current diesel fleet are $195–$249/capita compared to $174–$205/capita for a new diesel fleet, and $156–$177/capita for an electric fleet, depending on the HR. We find that freight electrification could avoid $6.2–8.5 billion in health and climate damages annually when compared to a fleet of new diesel vehicles (with even higher benefits when compared to the current diesel fleet). However, the Midwest and parts of the Gulf Coast would experience an increase in health damages due to vehicles charging using electricity from coal power plants. If old coal power plants (operating in 1980 or earlier) are replaced with zero-emission generation, electrification of all U.S. freight would result in $32.3–39.2 billion in avoided damages annually and health benefits throughout the U.S. Electrifying transport of consumer manufacturing goods (including electronics, transport equipment, and precision instruments) and food, beverage, and tobacco products would provide the largest absolute health and climate benefits, whereas mixed freight and manufacturing goods would result in the largest benefits per tonne-km. We find small variations in health damages across race and income. These results will help policymakers prioritize electrification and charging investment strategies for the freight transportation sub-sector.

Hennessy, Eleanor M. (ORCID:0000000294715765)↗
DOE OSTI2026

Production of muonic kaon atoms at high-energy colliders

We develop a framework for the formation of exotic muonic kaon atoms ($K\mu$) in semileptonic $D^{0}$ decays, using the effective weak Hamiltonian, a helicity-based treatment of the leptonic current, and a nonrelativistic bound-state projection. The resulting branching ratio, $\mathrm{BR}(D^{0}\!\to(K\mu )\nu_{\mu})=2.29\times10^{-10}$, is implemented in a ROOT-based code to estimate yields at RHIC, LHC, and STCF. We show quantitatively that $K\mu$ atoms—also produced through coalescence in the quark--gluon plasma (QGP)—provide a sensitive probe of low-momentum primordial muons and early-time electromagnetic radiation, offering complementary constraints in an otherwise unexplored phase space for thermal dilepton and photon emission. Newly estimated dissociation cross sections in detector material indicate that secondary‑vertex reconstruction should be experimentally feasible, allowing clean experimental identification of the atoms. Projected yields from QGP coalescence in LHC and RHIC heavy-ion collisions, and from $D^{0}$ decays in LHC high-luminosity $p+p$ collisions indicate that the first observation of $K\mu$ atoms is within reach. Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI. Article funded by SCOAP3 and published under licence by Chinese Physical Society and the Institute of High Energy Physics of the Chinese Academy of Science and the Institute of Modern Physics of the Chinese Academy of Sciences and IOP Publishing Ltd.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Parametrization of Generalized Parton Distributions from 𝑡-Channel String Exchange in AdS Spaces

We introduce a string-based parametrization for nucleon quark and gluon generalized parton distributions (GPDs) that is valid for all skewness. Our approach leverages conformal moments, representing them as the sum of spin-𝑗 nucleon 𝐴-form factor and skewness-dependent spin-𝑗 nucleon 𝐷-form factor, derived from 𝑡-channel string exchange in AdS spaces consistent with Lorentz invariance and unitarity. This model-independent framework, satisfying the polynomiality condition due to Lorentz invariance, uses Mellin moments from empirical data to estimate these form factors. With just five Regge slope parameters, our method accurately produces various nucleon quark GPD types and symmetric nucleon gluon GPDs through pertinent Mellin-Barnes integrals. Our isovector nucleon quark GPD is in agreement with existing lattice data, promising to improve the empirical extraction and global analysis of nucleon GPDs in exclusive processes, by avoiding the deconvolution problem at any skewness, for the first time.

QCD phenomenology↗
DOE OSTI2025

Reconstructing Hanford worker external doses from photons for epidemiology

The accurate reconstruction of external photon doses is essential for credible radiation epidemiology. This article presents the methodology used to derive dose estimates for 37 012 Hanford Site workers included in the Million Person Study. The approach employs historical dose records from the Hanford Radiation Exposure database and a previous epidemiology study. Bias correction factors specific to dosimeter type and period of use were applied and missing annual doses were estimated using a hierarchical nearby method to estimate deep dose equivalent for each worker. For early years with limited detection sensitivity, missed doses were quantified based on expected time-period-specific, low-dose statistical distributions. The revised dose estimates resulted in lower median and mean career doses than unadjusted data, while increasing the number of person-years with nonzero dose. Sensitivity analyses assessed the influence of bias in dosimetry measurements, missed doses and gap years on dose estimates. Differences in cumulative dose estimates between unadjusted and revised annual estimates are most prominent in the early operational years due to the highest bias during that time period.

dose reconstruction↗
DOE OSTI2025

Are better combinations of DERs more profitable?: Combinatorial optimization for aggregation of DERs in wholesale electricity markets

Recently, regulatory changes in various countries have enabled the participation of small-scale distributed energy resources (DERs) aggregated in virtual power plants (VPPs) in wholesale electricity markets. The inherent uncertainty and variability of resources comprising VPPs can lead to imbalances between forecasted and metered outputs, potentially resulting in the deficient settlement of generation under imbalance settlement rules. To address this challenge, it is essential to manage variability in the planning phase and uncertainty in the operation phase. Most current research focuses on managing forecasting errors in the operational phase, with insufficient attention given to the planning phase. Here, to bridge this gap, this paper proposes an optimal combination strategy for DERs to maximize the market participation revenue of VPPs by proactively managing variability in the planning phase. To estimate the expected revenue, we conducted analyses for homogeneous and heterogeneous DERs using Monte Carlo simulations and genetic algorithms. Remarkably, the proposed method demonstrated approximately 8 % higher revenue compared to the neighboring group case when considering diversity in DER set configuration with equal proportions of photovoltaics and wind.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2021

Assessing the use of portable air cleaners for reducing exposure to airborne diseases in a conference room with thermal stratification

The COVID-19 pandemic has highlighted the need for strategies that mitigate the risk of aerosol disease transmission in indoor environments with different ventilation strategies. It is necessary for building operators to be able to estimate and compare the relative impacts of different mitigation strategies to determine suitable strategies for a particular situation. Using a validated CFD model, this study simulates the dispersion of exhaled contaminants in a thermally stratified conference room with overhead heating. The impacts of portable air-cleaners (PACs) on the room airflow and contaminant distribution were evaluated for different PAC locations and flow rates, as well as for different room setups (socially distanced or fully occupied). To obtain a holistic view of a strategy's impacts under different release scenarios, we simultaneously model the steady-state distribution of aerosolized virus contaminants from eight distinct sources in 18 cases for a total of 144 release scenarios. The simulations show that the location of the source, the PAC settings, and the room set-up can impact the average exposure and PAC effectiveness. For this studied case, the PACs reduced the room average exposure by 31%-66% relative to the baseline case. Some occupant locations were shown to have a higher-than-average exposure, particularly those seated near the airflow outlet, and occupants closest to sources tended to see the highest exposure from said source. We found that these PACs were effective at reducing the stratification caused by overhead heating, and also identified at least one sub-optimal location for placing a PAC in this space.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRS1985

Kalman-like estimation for static distributed systems Antenna shape from radiation measurements

This paper advances an approach to the determination of shape of static distributed systems. It also illustrates the application of the approach to the problems of surface diagnosis of large parabolic reflectors. The estimation methods developed combine in an optimal sense the information from an elliptic model of the structure and from measurements of the structural deflection and of the far-field pattern changes due to the structural deformation. The estimators have a predictor-corrector structure, quite similar to that of a Kalman filter. The system model is first used to obtain a predicted estimate. A correction term is then added to the prediction to obtain the final state estimate. The relative weighting between prediction and correction terms is determined by an estimator gain. As in a Kalman filter, the estimator gain can be expressed in terms of the state estimation error covariance.

Rodriguez, G.↗
DOE OSTI2026

Gaussian processes for inferring parton distributions

The extraction of parton distribution functions (PDFs) from experimental or lattice QCD data is an ill-posed inverse problem, where regularization strongly impacts both systematic uncertainties and the reliability of the results. We study a framework based on Gaussian Process Regression (GPR) to reconstruct PDFs from lattice QCD matrix elements. Within a Bayesian framework, Gaussian processes serve as flexible priors that encode uncertainties, correlations, and constraints without imposing rigid functional forms. We investigate a wide range of kernel choices, mean functions, and hyperparameter treatments. We quantify information gained from the data using the Kullback-Leibler divergence. Synthetic data tests demonstrate the consistency and robustness of the method. Our study establishes GPR as a systematic and non-parametric approach to PDF reconstruction, offering controlled uncertainty estimates and reduced model bias in lattice QCD analyses.

hadronic spectroscopy↗
DOE OSTI2025

Effects of Galactic Irradiation on Thermal and Electronic Transport in Tungsten

The impact of irradiation on the thermal and electronic properties of materials is a persistent puzzle, particularly defect formation at the atomic and nanoscales. This work examines the nanoscale effects of low-energy irradiation on tungsten (W), focusing on defect-induced modifications to thermal and electronic transport. Using the site-projected thermal conductivity (SPTC) method [A. Gautam et al. PSS-RRL, 2400306, 2024], bulk and twin-grain boundary W with vacancy defects based on the Norgett–Robinson–Torrens displacements per atom model is analyzed. SPTC provides a detailed prediction of postcascade spatial thermal conductivity distribution. Electronic conductivity activity is estimated using the “N 2 method” [K. Nepal et al. Carbon, 119711, 2025] to explore the consequences of vacancies and grain boundaries, highlighting the defect-dependent nature of charge transport behavior. These findings offer high-resolution insights into irradiation-driven transport phenomena, with implications for space-exposed materials and nanoscale thermal/electronic management.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Simplified calculation of the area specific impedance for solid-state battery design

Simplified algebraic area specific impedance (ASI) correlations have been developed for solid-state composite battery electrodes made of a single ion conducting electrolyte, conductive additive, and intercalation active material. Two ASI expressions were developed, one for short times ( i.e. , pulsed power operation) and another for the pseudo steady state operation (i.e., sustained discharge for energy estimation). A full electrochemical model based on porous electrode theory was developed to examine the accuracy of the simplified ASI expressions. The simplified expressions agree favorably with full model results over a wide range of parameters (i.e. , electrode thicknesses, electrolyte conductivities, solid-state diffusion coefficients, specific surface areas, etc.) and conditions (i.e. , C-rates, states of charge, and pulse times). Under most conditions, the error between the full model and the correlations is well below 7 %. Higher errors were observed for the pseudo steady state expression at high/ low states of charge where the assumption of uniform reaction distributions loses validity. Here, the short time ASI has higher error at low states of charge due to the nonlinearity of the open circuit voltage equation, which is assumed linear in the formulation of the simplified algebraic expression.

25 ENERGY STORAGE↗
DOE OSTI2026

The Role of Internal Variability in Springtime Arctic Amplification from 1980 to 2022

Arctic amplification (AA) refers to the enhanced warming of the Arctic relative to the global average due to rising greenhouse gases, measured as the ratio of Arctic-mean to global-mean surface air temperature (SAT) trends. From 1980 to 2022, annual-mean AA reached 4.2 (Arctic defined as north of 70°N). Climate models simulate AA but fail to reproduce its magnitude. Sweeney et al. attributed much of this model–observation discrepancy to internal variability. AA shows seasonality and so does the discrepancy. Spring (March–May) shows the largest gap: Observed AA is 4.2, while the multimodel mean is 2.7. This raises several questions: 1) What role does internal variability play in observed spring AA? 2) How does simulated spring AA compare to observations when internal variability is removed? 3) If internal variability is significant, what mechanisms drive it? To address these, we adapted the machine learning algorithm from Sweeney et al., training on simulated multidecadal spring SAT and sea level pressure (SLP) trend maps. Our results show that internal variability enhanced spring Arctic warming by 37% and reduced global warming by 10%. Removing internal variability reconciles the spring AA discrepancy. The estimated internal contribution to Arctic spring warming is supported by an independent dynamical adjustment approach. We identify an atmospheric circulation pattern in observations associated with this internal warming. Observed internal Siberian SAT and SLP trends follow the simulated SAT–SLP relationship but lie at the distribution’s extreme, suggesting models generally underestimate internal variability unless the observed configuration reflects a rare real-world realization.

Arctic↗
NASA NTRS1980

X-ray spectroscopy of late-type stars

The solid state spectrometer on the Einstein Observatory determined .4 - 4.5 keV spectra for Capella, Algol and 6 RS CVn binaries. All show evidence for a bimodal distribution of emission measure with temperature with one component approximately 7 million degrees and one approximately 40 million degrees. The spread in values of both luminosity and emission measure is 10 for the low temperature component and approximately 500 for the high temperature component. Line emission due to Fe can be identified in most of them and abundances of Si, S and Fe are consistent with approximately solar values in all cases. Estimates indicate dimensions of the emitting regions are on the order of the stellar size and the binary separation for the low and high temperature components, respectively, unless the pressures are high. Variations in the flux were observed, mostly in the hard component for the RS CVn binaries, in the soft component for Capella. A flare was observed during primary eclipse of Algol. The possibility is discussed that the other variations could all be due to intrinsic variability with a time scale of hours-days rather than eclipse or modulation with photometric phase.

Swank, J. H.↗
NASA NTRS2011

Reconciling Satellite-Derived Atmospheric Properties with Fine-Resolution Land Imagery: Insights for Atmospheric Correction

This paper investigates to what extent satellite measurements of atmospheric properties can be reconciled with fine-resolution land imagery, in order to improve the estimates of surface reflectance through physically based atmospheric correction. The analysis deals with mountainous area (Landsat scene of Peruvian Amazon/Andes, 72 E and 13 S), where the atmosphere is highly variable. Data from satellite sensors were used for characterization of the key atmospheric constituents: total water vapor (TWV), aerosol optical depth (AOD), and total ozone. Constituent time series revealed the season-dependent mean state of the atmosphere and its variability. Discrepancies between AOD from the Advanced Along-Track Scanning Radiometer (AATSR) and Moderate Resolution Imaging Spectroradiometer (MODIS) highlighted substantial uncertainty of atmospheric aerosol properties. The distribution of TWV and AOD over a Landsat scene was found to be exponentially related to ground elevation (mean R(sup 2) of 0.82 and 0.29, respectively). In consequence, the atmosphere-induced and seasonally varying bias of the top-of-atmosphere signal was also elevation dependent (e.g., mean Normalized Difference Vegetation Index bias at 500 m was 0.06 and at 4000 m was 0.01). We demonstrate that satellite measurements of key atmospheric constituents can be downscaled and gap filled with the proposed "background + anomalies" approach, to allow for a better compatibility with fine-resolution land surface imagery. Older images (i.e., predating the MODIS/ATSR era), without coincident atmospheric data, can be corrected using climatologies derived from time series of satellite retrievals. Averaging such climatologies over space compromises the quality of correction result to a much greater degree than averaging them over time. We conclude that the quality of both recent and older fine-resolution land surface imagery can be improved with satellite-based atmospheric data acquired to date.

Zelazowski, Przemyslaw↗
NASA NTRSDate not supplied

Comparison of Entry Descent and Landing Aerodynamic Databases with Uncertainty Quantification Developed Using Machine Learning Techniques

When developing the aerodynamic databases for use in trajectory simulations, it is important to develop a system of metrics to qualify which aerodynamic models are best to use. Since aerodynamics are just one input into trajectory simulations, the results of these simulations do not reflect on the quality of the aerodynamic database used. This means that aerodynamic database comparisons must be done offline. While traditional metrics that focus on mean/nominal predictions are a good first step, more robust estimates of the prediction interval become important as more focused uncertainty models are developed. We explore the limitations of evaluating aerodynamic models based purely on nominal-centered response surfaces. Before elaborating and evaluating metrics based on distributed models, the value of evaluating prediction interval and confidence interval are discussed to conclude that prediction intervals are more relevant to the use of trajectory analysis. Several metrics to evaluate the prediction interval are introduced with a focus on the standard calibration metric. Finally, we compare candidate models using both mean and distributed metrics. A finalized candidate model developed using state of the art machine learning methods is compared to a baseline model developed using traditional aerodynamic database modeling techniques.

Aerodynamic Database↗