Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “directional data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Characterization of structural connections using free and forced response test data

The accurate prediction of system dynamic response often has been limited by deficiencies in existing capabilities to characterize connections adequately. Connections between structural components often are complex mechanically, and difficult to accurately model analytically. Improved analytical models for connections are needed to improve system dynamic predictions. A procedure for identifying physical connection properties from free and forced response test data is developed, then verified utilizing a system having both a linear and nonlinear connection. Connection properties are computed in terms of physical parameters so that the physical characteristics of the connections can better be understood, in addition to providing improved input for the system model. The identification procedure is applicable to multi-degree of freedom systems, and does not require that the test data be measured directly at the connection locations.

Lawrence, C.↗
NASA NTRS1986

Development and application of linear and nonlinear methods for interpretation of lightning strikes to in-flight aircraft

Since 1980, NASA has been collecting direct strike lightning data by flying an instrumented F-106B aircraft into thunderstorms. The continuing effort to interpret the measured data is reported here. Both linear and nonlinear finite difference modeling techniques are applied to the problem of lightning triggered by an aircraft in a thunderstorm. Five different aircraft are analyzed to determine the effect of aircraft size and shape on lightning triggering. The effect of lightning channel impedance on aircraft response is investigated. The particle environment in thunderstorms and electric field enhancements by typical ice particles is also investigated.

Rudolph, Terence↗
NASA NTRS1991

A k-epsilon modeling of near wall turbulence

A k-epsilon model is proposed for turbulent bounded flows. In this model, the turbulent velocity scale and turbulent time scale are used to define the eddy viscosity. The time scale is shown to be bounded from below by the Kolmogorov time scale. The dissipation equation is reformulated using the time scale, removing the need to introduce the pseudo-dissipation. A damping function is chosen such that the shear stress satisfies the near wall asymptotic behavior. The model constants used are the same as the model constants in the commonly used high turbulent Reynolds number k-epsilon model. Fully developed turbulent channel flows and turbulent boundary layer flows over a flat plate at various Reynolds numbers are used to validate the model. The model predictions were found to be in good agreement with the direct numerical simulation data.

Yang, Z.↗
NASA NTRS1989

Automated homodyne analysis instrumentation for characterizing S.C. lasers

A versatile laser characterization method is described for evaluating semiconductor lasers developed under R&D efforts and also commercially available lasers. This method features a high-resolution technique for measuring laser linewidth that was also found to introduce optical feedback to the laser. The modified delayed self-homodyne system is therefore utilized to collect a variety of laser characteristic measurements under dynamic operating conditions while simultaneously assessing the effects of optical feedback on the laser. Measurements employing scanning Fabry-Perot interferometers are described which supplement the data obtained from direct measurements and measurements made utilizing the self-homodyne system.

Hendricks, Herbert D.↗
NASA NTRS1991

Scaling of spanwise length scales in a turbulent boundary layer

The results from an experimental investigation at IIT were combined with Spalart's (1988) Direct Numerical Simulation data base to investigate the scaling of the spanwise length scales of the dominant structures in the near-wall region of a turbulent boundary layer. To achieve this goal, the scaling of the spanwise correlation coefficient between the wall-shear stress and the streamwise velocity, at various heights in the boundary layer, was studied over the Reynolds number range, 670 to 5961. In addition, the scaling of the conditional velocity field associated with high and low wall-shear stress events was examined. The results indicate that the spanwise correlation coefficient scales with inner variables for 'small' spanwise offsets.

Wark, C. E.↗
NASA NTRS1991

An investigation of a contoured wall injector for hypervelocity mixing augmentation

An experimental and computational investigation of a contoured wall fuel injector is presented. The injector was aimed at enabling shock-enhanced mixing for the supersonic combustion ramjet engines currently envisioned for applications on hypersonic vehicles. Three-dimensional flow field surveys, and temporally-resolved planar Rayleigh scattering measurements are presented for Mach 1.7 helium injection into Mach 6 air. These experimental data are compared directly with a three-dimensional Navier-Stokes simulation of the flow about the injector array. Two dominant axial vorticity sources are identified and characterized. The axial vorticity produced strong convective mixing of the injectant with the freestream. Shock-impingement was particularly effective as it assured seeding of baroclinic vorticity directly on the helium/air interface. The vorticity coalesced into a counter-rotating vortex pair of a sense which produced migration of the helium away from the wall. The influences of spatial averaging on the representation of the flow field as well as the importance of the fluctuating component of the flow in producing molecularly-mixed fluid are addressed.

Waitz, Ian A.↗
NASA NTRS1992

Solar exposure of LDEF experiment trays

Exposure to solar radiation is one of the primary causes of degradation of materials on spacecraft. Accurate knowledge of solar exposure is needed to evaluate the performance of materials carried on the Long Duration Exposure Facility (LDEF) during its nearly 6 year orbital flight. Presented here are tables and figures of calculated solar exposure for the experiment rows, longerons, and end bays of the spacecraft as functions of time in orbit. The data covers both direct solar and earth reflected radiation. Results are expressed in cumulative equivalent sun hours (CESH) or the hours of direct, zero incidence solar radiation that would cause the same irradiance of a surface. Space end bays received the most solar radiation, 14,000 CESH; earth end bays received the least, 4,500 CESH. Row locations received between 6,400 CESH and 11,200 CESH with rows facing either eastward or westward receiving the most radiation and rows facing northward or southward receiving the least.

Bourassa, R. J.↗
NASA NTRS1992

Reactant conversion in homogeneous turbulence: Mathematical modeling, computational validations and practical applications

Closed form analytical expressions are obtained for predicting the limited rate of reactant conversion in a binary reaction of the type F + rO yields (1 + r) Product in unpremixed homogeneous turbulence. These relations are obtained by means of a single point Probability Density Function (PDF) method based on the Amplitude Mapping Closure. It is demonstrated that with this model, the maximum rate of the reactants' decay can be conveniently expressed in terms of definite integrals of the Parabolic Cylinder Functions. For the cases with complete initial segregation, it is shown that the results agree very closely with those predicted by employing a Beta density of the first kind for an appropriately defined Shvab-Zeldovich scalar variable. With this assumption, the final results can also be expressed in terms of closed form analytical expressions which are based on the Incomplete Beta Functions. With both models, the dependence of the results on the stoichiometric coefficient and the equivalence ratio can be expressed in an explicit manner. For a stoichiometric mixture, the analytical results simplify significantly. In the mapping closure, these results are expressed in terms of simple trigonometric functions. For the Beta density model, they are in the form of Gamma Functions. In all the cases considered, the results are shown to agree well with data generated by Direct Numerical Simulations (DNS). Due to the simplicity of these expressions and because of nice mathematical features of the Parabolic Cylinder and the Incomplete Beta Functions, these models are recommended for estimating the limiting rate of reactant conversion in homogeneous reacting flows. These results also provide useful insights in assessing the extent of validity of turbulence closures in the modeling of unpremixed reacting flows. Some discussions are provided on the extension of the model for treating more complicated reacting systems including realistic kinetics schemes and multi-scalar mixing with finite rate chemical reactions in more complex configurations.

Madnia, C. K.↗
NASA NTRS1992

Numerical evaluation of the incomplete airy functions and their application to high frequency scattering and diffraction

The incomplete Airy integrals serve as canonical functions for the uniform ray optical solutions to several high frequency scattering and diffraction problems that involve a class of integrals characterized by two stationary points that are arbitrarily close to one another or to an integration endpoint. Integrals of such analytical properties describe transition region phenomena associated with composite shadow boundaries. An efficient and accurate method for computing the incomplete Airy functions would make the solutions to such problems useful for engineering purposes. Here, a convergent series solution form for the incomplete Airy functions is derived. Asymptotic expansions involving several terms were also developed and serve as large argument approximations. The combination of the series solution form with the asymptotic formulae provides for an efficient and accurate computation of the incomplete Airy functions. Validation of accuracy is accomplished using direct numerical integration data.

Constantinides, E. D.↗
NASA NTRS1991

Comparison between carbon monoxide measurements from spaceborne and airborne platforms

The measurements of air pollution from satellites (MAPS) experiment measured the distribution of middle tropospheric carbon monoxide (CO) from the Space Shuttle during October 1984. A critical area of the experiment is the assessment of experimental error of the MAPS data. This error is determined by the comparison between the space-based CO data and concurrent, direct CO measurements taken aboard aircraft. Because of the variability in the CO measurements near land sources, a strategy for comparing the tropospheric CO measurements over the remote oceans is presented.

Connors, V. S.↗
NASA NTRS1992

Probability density functions in turbulent channel flow

The probability density functions (pdf's) of the fluctuating velocity components, as well as their first and second derivatives, are calculated using data from the direct numerical simulations (DNS) of fully developed turbulent channel flow. It is observed that, beyond the buffer region, the pdf of each of these quantities is independent of the distance from the channel wall. It is further observed that, beyond the buffer region, the pdf's for all the first derivatives collapse onto a single universal curve and those of the second derivatives also collapse onto another universal curve, irrespective of the distance from the wall. The kinetic-energy dissipation rate exhibits log normal behavior.

Dinavahi, Surya P. G.↗
NASA NTRS1991

White paper on science operations

Major changes are taking place in the way astronomy gets done. There are continuing advances in observational capabilities across the frequency spectrum, involving both ground-based and space-based facilities. There is also very rapid evolution of relevant computing and data management technologies. However, although the new technologies are filtering in to the astronomy community, and astronomers are looking at their computing needs in new ways, there is little coordination or coherent policy. Furthermore, although there is great awareness of the evolving technologies in the arena of operations, much of the existing operations infrastructure is ill-suited to take advantage of them. Astronomy, especially space astronomy, has often been at the cutting edge of computer use in data reduction and image analysis, but has been somewhat removed from advanced applications in operations, which have tended to be implemented by industry rather than by the end-user scientists. The purpose of this paper is threefold. First, we briefly review the background and general status of astronomy-related computing. Second, we make recommendations in three areas: data analysis; operations (directed primarily to NASA-related activities); and issues of management and policy, believing that these must be addressed to enable technological progress and to proceed through the next decade. Finally, we recommend specific NASA-related work as part of the Astrotech-21 plans, to enable better science operations in the operations of the Great Observatories and in the lunar outpost era.

Schreier, Ethan J.↗
NASA NTRS1993

Hidden Markov models for fault detection in dynamic systems

The invention is a system failure monitoring method and apparatus which learns the symptom-fault mapping directly from training data. The invention first estimates the state of the system at discrete intervals in time. A feature vector x of dimension k is estimated from sets of successive windows of sensor data. A pattern recognition component then models the instantaneous estimate of the posterior class probability given the features, p(w(sub i) perpendicular to x), 1 less than or equal to i is less than or equal to m. Finally, a hidden Markov model is used to take advantage of temporal context and estimate class probabilities conditioned on recent past history. In this hierarchical pattern of information flow, the time series data is transformed and mapped into a categorical representation (the fault classes) and integrated over time to enable robust decision-making.

Smyth, Padhraic J.↗
NASA NTRS1992

Infrared optical properties of Mars soil analog materials: Palagonites

The globally distributed bright soils on Mars represent products of chemical alteration of primary igneous materials. As such, understanding the chemistry and mineralogy of these soils provides clues about the nature of the parent materials and the type, duration, and extent of the chemical weathering environments on Mars. Such clues are key in developing an understanding of the interior and surficial processes that have operated throughout Mars' history to yield the surface as it is currently observed. The generally homogeneous nature of these soils is illustrated by a variety of observational data. These data include (1) direct determination of elemental abundances by the X-ray fluorescence instruments on both Viking Landers, (2) Earth-based telescopic observations, and (3) space-based observations. Based on their spectral properties in the visible and near-infrared, terrestrial palagonitic soils have been suggested as analogs for the bright regions on Mars. Palagonites represent the weathering products of basaltic glass and as such are composed of a variety of minerals/materials. In order to gain an understanding regarding the chemical, mineralogical, and spectral properties of a broad suite of palagonites, several samples were collected from the eastern and central regions of the island of Hawaii.

Roush, Ted L.↗
NASA NTRS1992

Detection and characterization of fatigue cracks in thin metal plates by low frequency resonant model analysis

Low-frequency resonant model analysis, a technique for the detection and characterization of fatigue cracks in thin metal plates, which could be adapted to rapid scan or large area testing, is considered. Experimental data displaying a direct correlation between fatigue crack geometry and resonance frequency for the second vibrational plate mode are presented. FEM is used to calculate the mechanical behavior of the plates, and provides a comparison basis for the experimentally determined resonance frequency values. The waveform of the acoustic emission generated at the resonant frequency is examined; it provides the basis for a model of the interaction of fatigue crack faces during plate vibration.

Wincheski, B.↗
NASA NTRS1991

Creep and stress relaxation modeling of polycrystalline ceramic fibers

A variety of high performance polycrystalline ceramic fibers are currently being considered as reinforcement for high temperature ceramic matrix composites. However, under mechanical loading above 800 C, these fibers display creep-related instabilities which can result in detrimental changes in composite dimensions, strength, and internal stress distributions. As a first step toward understanding these effects, this study examines the validity of mechanistic-based empirical model which describes primary stage tensile creep and stress relaxation of polycrystalline ceramic fibers as independent functions of time, temperature, and applied stress or strain. To verify these functional dependencies, a simple bend test is used to measure stress relaxation for four types of commercial ceramic fibers for which direct tensile creep data are available. These fibers include both nonoxide (SCS-6, Nicalon) and oxide (PRD-166, FP) compositions. The results of the bend stress relaxation (BSR) test not only confirm the stress, time, and temperature dependencies predicted by the model but also allow measurement of model empirical parameters for the four fiber types. In addition, comparison of model predictions and BSR test results with the literature tensile creep data show good agreement, supporting both the predictive capability of the model and the use of the BSR test as a simple method for parameter determination for other fibers.

Dicarlo, James A.↗
NASA NTRS1992

Reactant conversion in homogeneous turbulence - Mathematical modeling, computational validations, and practical applications

The presently obtained closed-form analytical expressions, which predict the limiting rate of mean reactant conversion in homogeneous turbulent flows under the influence of a binary reaction, are derived via the single-point pdf method based on amplitude mapping closure. With this model, the maximum rate of the mean reactant's decay can be conveniently expressed in terms of definite integrals of the parabolic cylinder functions. The results obtained are shown to be in good agreement with data generated by direct numerical simulations.

Madnia, C. K.↗
NASA NTRS1993

A Reynolds stress model for near-wall turbulence

The paper formulates a tensorially consistent near-wall second-order closure model. Redistributive terms in the Reynolds stress equations are modeled by an elliptic relaxation equation in order to represent strongly nonhomogeneous effects produced by the presence of walls; this replaces the quasi-homogeneous algebraic models that are usually employed, and avoids the need for ad hoc damping functions. The model is solved for channel flow and boundary layers with zero and adverse pressure gradients. Good predictions of Reynolds stress components, mean flow, skin friction, and displacement thickness are obtained in various comparisons to experimental and direct numerical simulation data. The model is also applied to a boundary layer flowing along a wall with a 90-deg, constant-radius, convex bend.

Durbin, P. A.↗