Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dimensional analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Evaluation of a simplified gross thrust calculation technique using two prototype F100 turbofan engines in an altitude facility

The technique which relies on afterburner duct pressure measurements and empirical corrections to an ideal one dimensional flow analysis to determine thrust is presented. A comparison of the calculated and facility measured thrust values is reported. The simplified model with the engine manufacturer's gas generator model are compared. The evaluation was conducted over a range of Mach numbers from 0.80 to 2.00 and at altitudes from 4020 meters to 15,240 meters. The effects of variations in inlet total temperature from standard day conditions were explored. Engine conditions were varied from those normally scheduled for flight. The technique was found to be accurate to a twice standard deviation of 2.89 percent, with accuracy a strong function of afterburner duct pressure difference.

Kurtenbach, F. J.↗
NASA NTRS1979

User's guide: SPAR processor MN analysis of inelastic three-dimensional solids, part 2

A user's guide to the processor MN is presented. The processor MN is used to analyze systems in which some or all of the three dimensional elements have nonlinear stress-strain relations. Representations of nonlinear material behavior implemented into the system are provided including Von Mises yield criterion, the Prandtl-Reuss flow rule, and the mechanical sublayer method. The primary data sets used to represent the state of the system are presented.

Whetstone, W. D.↗
NASA NTRS1980

Numerical calculation of transonic axial turbomachinery flows

A numerical method and the results of a computer program are presented for solving an exact, three dimensional, full potential equation that models rotating and nonrotating inviscid, absolutely irrotational, homentropic flows. Besides calculating the flows through an arbitrarily shaped rotor or stator blade row mounted on an axisymmetric hub and confined in an axisymmetric duct, the computer program is also capable of analyzing flow fields about arbitrarily shaped wing body combinations, propellers, helicopter rotors in hover, and wind turbine rotors. The governing equation is solved numerically in a fully conservative form by using an artificial time concept, a finite volume technique, rotated type dependent differencing, successive line overrelaxation, and sequential boundary conforming grid refinement. An artificial viscosity is added in fully conservative form, and an initial guess for the potential field is applied, as determined by a two dimensional cascade analysis.

Dulikravich, D. S.↗
NASA NTRS1980

Control electronics for a multi-laser/multi-detector scanning system

The Mars Rover Laser Scanning system uses a precision laser pointing mechanism, a photodetector array, and the concept of triangulation to perform three dimensional scene analysis. The system is used for real time terrain sensing and vision. The Multi-Laser/Multi-Detector laser scanning system is controlled by a digital device called the ML/MD controller. A next generation laser scanning system, based on the Level 2 controller, is microprocessor based. The new controller capabilities far exceed those of the ML/MD device. The first draft circuit details and general software structure are presented.

Kennedy, W.↗
NASA NTRS1980

Numerical calculation of transonic axial turbomachinery flows

This paper presents a numerical method and the results of a computer program for solving an exact, three-dimensional, full-potential equation that models rotating and nonrotating inviscid, absolutely irrotational, homentropic flows. Besides calculating the flows through an arbitrarily shaped rotor or stator blade row mounted on an axisymmetric hub and confined in an axisymmetric duct, the computer program is also capable of analysing flow fields about arbitrarily shaped wing-body combinations, propellers, helicopter rotors in hover, and wind turbine rotors. The governing equation is solved numerically in a fully conservative form by using an artificial time concept, a finite volume technique, rotated type-dependent differencing, successive line overrelaxation, and sequential boundary-conforming grid refinement. An artificial viscosity is added in fully conservative form; and an initial guess for the potential field is applied, as determined by a two-dimensional cascade analysis.

Dulikravich, D. S.↗
NASA NTRS1981

Performance and analysis of a three-dimensional nonorthogonal laser Doppler anemometer

A three dimensional laser Doppler anemometer with a nonorthogonal third axis coupled by 14 deg was designed and tested. A highly three dimensional flow field of a jet in a crossflow was surveyed to test the three dimensional capability of the instrument. Sample data are presented demonstrating the ability of the 3D LDA to resolve three orthogonal velocity components. Modifications to the optics, signal processing electronics, and data reduction methods are suggested.

Snyder, P. K.↗
NASA NTRS1982

Topological analysis of computed three-dimensional viscous flow fields

Computed solutions of the time-dependent, Reynolds-averaged Navier-Stokes equations for three dimensional flows having thin shear layers are analyzed using topological concepts. Specific examples include the transonic flow over a body of revolution with conical afterbody at moderate angles of incidence to the free stream. Experimental flow-visualization techniques are simulated graphically to visualize the computed flow. Scalar and vector fluid dynamics properties such as pressure, shear stress, and vorticity on the body surface are presented as topological maps, and their relationship to one another in terms of orientation and singular points is discussed. The extrapolation from these surface topologies toward the understanding of external flow-field behavior is and demonstrated.

Deiwert, G. S.↗
NASA NTRS1981

Stationary electrostatic solitary waves in the auroral plasma

Time-stationary fluid equations are used to describe electrostatic solitons in an auroral plasma of cold ionospheric and hot plasma sheet particles. A one-dimensional fluid analysis of the four component model auroral plasma indicates that at least two different, weakly damped, small amplitude electrostatic solitons can propagate along the geomagnetic field. The slower of the two is a generalization of an ion-acoustic solitary wave in a multi-component plasma, and ion inertia is negligible for the faster mode which is supported by the two electron components and resembles a clump of shielded negative space charge convected by the drifting plasma sheet electrons. Some expected features of the large amplitude properties are indicated qualitatively, and an analogy is considered between the theory of ion-acoustic shocks and a theory of double layers.

Lotko, W.↗
NASA NTRS1983

Transonic flow simulation of prop-fan configurations

This paper presents the results of a study that used a three-dimensional transonic analysis method to analyze flow around a wing-mounted prop-fan configuration. The transonic analysis method employs a cell-oriented finite volume approach to solve the full potential equation in conservative form over a numerically generated surface-fitted grid. The propeller slipstream effects are simulated using a linearized transpiration boundary condition. The results of analyses of flow over clean wing/body, wing/body/nacelle, and wing/body nacelle with slipstream are compared to test data.

Samant, S. S.↗
NASA NTRS1983

An analysis of the two-dimensional acoustic field in a nonuniform duct carrying compressible flow

An analytical/numerical linear acoustic solution in a nonuniform two-dimensional duct carrying a compressible mean flow is developed. A quasi-one dimensional mean flow model is employed together with a consistent expression for the cross-flow velocity. The acoustic solution is obtained using the Wave Envelope Method. Numerical results are compared with those of an existing Wave Envelope solution which includes a more general mean flow model. In addition, the singular behavior of the solutions derived in the current work for nearly sonic flow conditions is examined explicitly.

Uenishi, K.↗
NASA NTRS1982

Gravity receptors in a microcrustacean water flea - Sensitivity of antennal-socket setae in Daphnia magna

Gravity receptors of Dephnia magna were discovered on the basal segment of the swimming antennae and were shown to respond to upward water currents that pass the animal as it sinks between swimming strokes. Sensitivity of the gravity perceiving mechanism was tested by subjecting daphnids to a series of five decreasingly dense aqueous solutions (neutral density to water) in darkness (to avoid visual cues). Three-dimensional, video analysis of body position (pitch, yaw and roll) and swimming path (hop and sink, vertical and horizontal patterns) revealed a gradual threshold that occurred near a density difference between the animal and its environment of less than 0.25%. Because daphnids do not sink but continue to slide after stroking in the increased density solutions, gravity perception appears to occur during a vertical swing of the longitudinal body axis to the vertical plane, about their center of gravity, and, thereby, implies a multidirectional sensitivity for the antennal-socket setae.

Meyers, D. G.↗
NASA NTRS1983

The effects of the Asselin time filter on numerical solutions to the linearized shallow-water wave equations

In the present investigation, a one-dimensional linearized analysis is used to determine the effect of Asselin's (1972) time filter on both the computational stability and phase error of numerical solutions for the shallow water wave equations, in cases with diffusion but without rotation. An attempt has been made to establish the approximate optimal values of the filtering parameter nu for each of the 'lagged', Dufort-Frankel, and Crank-Nicholson diffusion schemes, suppressing the computational wave mode without materially altering the physical wave mode. It is determined that in the presence of diffusion, the optimum filter length depends on whether waves are undergoing significant propagation. When moderate propagation is present, with or without diffusion, the Asselin filter has little effect on the spatial phase lag of the physical mode for the leapfrog advection scheme of the three diffusion schemes considered.

Schlesinger, R. E.↗
NASA NTRS1982

Topological analysis of computed three-dimensional viscous flow fields

Computed solutions of the time-dependent, Reynolds-averaged Navier-Stokes equations for three-dimensional flows having thin shear layers are analyzed, using topological concepts. Specific examples include the transonic flow over a body of revolution with conical afterbody at moderate angles of incidence to the free stream. Experimental flow-visualization techniques are simulated graphically to visualize the computed flow. Scalar and vector fluid dynamic properties, such as pressure, shear stress, and vorticity on the body surface, are presented as topological maps, and their relationship to one another in terms of orientation and singular points is discussed. The extrapolation from these surface topologies toward the understanding of external flow-field behavior is discussed and demonstrated.

Deiwert, G. S.↗
NASA NTRS1983

Correlated particle and magnetic field observations of a large-scale magnetic loop structure behind an interplanetary shock

From a survey of observations on ISEE-3, an example of correlated particle and magnetic field observations of a large-scale magnetic loop structure is presented. Bidirectional proton fluxes were observed for a period of 40 hours in the energy range 35-1600 keV approximately 12 hours after the passage of the interplanetary shock of December 11, 1980, and directly after the passage of a discontinuity. For each of the eight logarithmically spaced energy channels, a three-dimensional anisotropy analysis reveals streaming along both directions of the magnetic field. The magnetic field rotated slowly but steadily through approximately 180 deg during this same 40-hour period; this is consistent with the existence of a large-scale loop with extent greater than 0.5 AU. The observations suggest that the particles are being injected into the loop sunward of the spacecraft; they appear as bidirectional fluxes in the outermost regions of the loop arising from a combination of focusing and near scatter-free transport.

Sanderson, T. R.↗
NASA NTRS1983

Eigenmode analysis of unsteady one-dimensional Euler equations

The initial boundary value problem describing the evolution of unsteady linearized perturbations of a steady, uniform subsonic flow is analyzed. The eigenmodes and eigenfrequencies of the system are derived and several examples are presented to illustrate the effect of different boundary conditions on the exponential decay rate of the eigenmodes. The resultant implications for the stability and convergence rates of finite difference computations are discussed.

Giles, M.↗
NASA NTRS1984

Assessment of three-dimensional inviscid codes and loss calculations for turbine aerodynamic computations

An assessment of several three dimensional inviscid turbine aerodynamic computer codes and loss models used at the NASA Lewis Research Center is presented. Five flow situations are examined, for which both experimental data and computational results are available. The five flows form a basis for the evaluation of the computational procedures. It was concluded that stator flows may be calculated with a high degree of accuracy, whereas, rotor flow fields are less accurately determined. Exploitation of contouring, learning, bowing, and sweeping will require a three dimensional viscous analysis technique.

Povinelli, L. A.↗
NASA NTRS1984

Wave drag as the objective function in transonic fighter wing optimization

The original computational method for determining wave drag in a three dimensional transonic analysis method was replaced by a wave drag formula based on the loss in momentum across an isentropic shock. This formula was used as the objective function in a numerical optimization procedure to reduce the wave drag of a fighter wing at transonic maneuver conditions. The optimization procedure minimized wave drag through modifications to the wing section contours defined by a wing profile shape function. A significant reduction in wave drag was achieved while maintaining a high lift coefficient. Comparisons of the pressure distributions for the initial and optimized wing geometries showed significant reductions in the leading-edge peaks and shock strength across the span.

Phillips, P. S.↗
NASA NTRS1983

Cooling and deformation of sulfur flows

A simple one-dimensional cooling analysis is used to consider the cooling of a flow of pure sulfur on the Ionian surface by a combination of upward radiation and downward conduction, and some speculations on the nature of surface structures and optical properties for such a flow are made. It is concluded that surface folding caused by compressive stresses, crustal foundering due to tensile fracturing and density inversions, and local turbulence may result in regularly spaced surface ridges periodically interrupted by upwellings of liquid sulfur onto the frozen surface of the flow. The model suggests that although the color of the surface crust of a quickly quenched sulfur flow will not necessarily reflect the local internal temperature of the flow, diapiric upwellings and convection from beneath this crust should indicate the progressive cooling of the inner, more fluid zones of the flow.

Fink, J. H.↗