Density and crystallinity measurements of liquid and solid n-undecane, n-tridecane, and o-xylene from 200 to 350K
Explore the source record for details and available documents.
Hust, J. G.↗
SEARCH · Engineering Papers
Results for “crystalline”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Crystalline embryos at ice-vapor interfaces
The nucleation of small monolayer ice-like clusters at the basal and prism ice-vapor interfaces is considered. It is found that the basal surfaces prefer triangular embryos with an orientation that reverses from layer to layer, whereas the most stable clusters on the prism surfaces are rectangular in configuration. At any given saturation ratio, the preferred prism clusters are found to have a critical energy of formation significantly lower than that of the basal clusters, basically because of differences in cluster corner free energies.
Bartley, D. L.↗
Correlation between stimulated scattering processes and laser-induced damage in crystalline quartz
The results of a systematic series of experiments to uncover possible correlation between laser-induced stimulated-Brillouin-scattering (SBS) phonons and damage in quartz are presented. Such correlation is confirmed and the various thresholds are established. The anomalous transmission factor under phonon generation is found to decay exponentially as predicted with increasing incident laser power. The LF SBS phonon is also demonstrated to be a sensitive probe for precatastrophic damage.
Yu, C.↗
Surface crystalline carbon temperature sensor
The described sensor has been used to measure small temperature changes in investigations related to the study of the properties of superfluid helium under zero-gravity conditions. The sensor requirements included high sensitivity, rapid response, small size, reproducibility, and ease of application to a test surface. In the preparation of the sensor a thin film of a commercially available carbon colloidal suspension is deposited on a substrate which must be electrically insulated or be covered with an insulating layer.
Petrac, D.↗
Effect of temperature on the electronic instability and the crystalline phase change at low temperature of V3Si type compounds
Equations assuming a Jahn-Teller type effect for the d band electrons in V3Si compounds are given, and the results of free-energy change calculations by using some approximations based on these equations are depicted. The tetragonal structure is converted to cubic as the temperature rises past T sub m which is calculated as 13 K. by the Batterman-Barrett method and is measured to be 20-5 K. Other parameters such as change of C sub p with temperature are predicted better.
Labbe, J.↗
Ionization induced damage in crystalline silicon
Close examination of the interaction of the energetic knock-on atoms with the local lattice environment reveals a damage mechanism which does satisfy the experimental data on proton irradiation of silicon. A proton-atom interaction with high energy transfer is considered where the proton path is delineated by a trail of ionization, and the silicon ion path is characterized by much heavier ionization terminating in a dense displacement cluster. At collision, many of the silicon electrons are stripped off, and the resulting energetic ion subsequently loses energy rapidly by Coulomb interaction with bound electrons. The rate of energy loss depends on the charge state and velocity of the knock-on ion. For ion energies in excess of 1 MeV, the intensity of ionization is sufficient to permit lattice atoms, stripped of their binding electrons, to reorient randomly before having an opportunity to recombine with electrons and re-establish the lattice. The path of a knock-on ion thus becomes a thin cylinder of amorphous material within the crystal. Amorphous silicon has a Fermi level closer to mid-band than does single crystal silicon, and a strong field therefore, results around this damaged region. The field produces a large depletion region, representing a very large capture cross section for minority carriers.
Meulenberg, A., Jr.↗
Electronic instability and change of crystalline phase in compounds of the V3Si type at low temperature
In V3Si, the V atoms form an array of dense linear chains; a tight-binding approximation in one dimension was used to describe the d electrons. The electronic energy calculated by this method was reduced when the lattice is deformed. This lead to a band type of the Jahn Teller effect, which may explain the cubic to tetragonal transition which was observed at low temperatures. The theory can be extended to other superconductors of the V3X type when X=Ga, Ge, Sn, etcetera, or NB3SN.
Labbe, J.↗
Data collection and interpretation of the lithologic characterization of the crystalline basement provinces of the eastern United States
There are no author-identified significant results in this report.
Lidiak, E. G.↗
Lithological characterization of crystalline basement rock provinces of the interior of the United States
Data acquisition and evaluation, basement geologic provinces, basement ages and tectonic provinces, configuration of the basement surface, and various abstracts and preprints are provided.
Lidiak, E. G.↗
Mechanical contact induced transformation from the amorphous to the crystalline state in metallic glass
Friction and wear tests were conducted with 3.2- and 6.4-millimeter-diameter aluminum oxide spheres sliding, in reciprocating motion, on a Fe67Co18B14Si1 metallic foil. Crystallites with a size range of 10 to 150 nanometers were produced on the wear surface of the amorphous alloy. A strong interaction between transition metals and metalloids such as silicon and boron results in strong segregation during repeated sliding, provides preferential transition metal-metalloid clustering in the amorphous alloy, and subsequently produces the diffused honeycomb structure formed by dark grey bands and primary crystals, that is, alpha-Fe in the matrix. Large plastic flow occurs on an amorphous alloy surface with sliding and the flow film of the alloy transfers to the aluminum oxide pin surface. Multiple slip bands due to shear deformation are observed on the side of the wear track. Two distinct types of wear debris were observed as a result of sliding: an alloy wear debris, and/or powdery-whiskery oxide debris.
Miyoshi, K.↗
Reduced thermal focusing and birefringence in zig-zag slab geometry crystalline lasers
The present investigation is concerned with interferometric measurements of the thermally induced optical effects in laser crystals, taking into account crystals cut in both the zig-zag slab and the conventional rod geometries. The measurements conducted demonstrate the significant advantages obtained by replacing the rod in a Nd:YAG laser with a slab. A description is provided of simple measures designed to eliminate end and edge effects, and efficiency and threshold data for the Nd:YAG slab and the rod it replaced are presented. The only disadvantage is a small increase in cost due to the more difficult fabrication of the slab and the greater amount of Nd:YAG which is needed to allow the ends to be unpumped.
Kane, T. J.↗
Low defect, high purity crystalline layers grown by selective deposition
The purity and perfection of a semiconductor is improved by depositing a patterned mask of a material impervious to impurities of the semiconductor on a surface of a blank. When a layer of semiconductor is grown on the mask, the semiconductor will first grow from the surface portions exposed by the openings in the mask and will bridge the connecting portions of the mask to form a continuous layer having improved purity, since only the portions overlying the openings are exposed to defects and impurities.
Morrison, A. D.↗
Summary of the high-efficiency crystalline solar cell research forum
An outline is given listing the speeches given in each session and the pertinent points is some speeches. There were six session, besides the overview session they were: (1) high efficiency concepts; (2) surface/interface effects; (3) bulk effects; (4) modeling; and (5) high efficiency device processing. Besides the emphasis placed on increasing efficiency of energy conversion, a great amount of discussion was spent on ways to reduce recombination and reducing surface defects.
Wolf, M.↗
Mechanical-contact-induced transformation from the amorphous to the partially crystalline state in metallic glass
Friction and wear tests were conducted with 3.2- and 6.4-millimeter-diameter aluminum oxide spheres sliding, in reciprocating motion, on a Fe67Co18B14Si1 metallic foil. Crystallites with a size range of 10 to 150 nanometers were produced on the wear surface of the amorphous alloy. A strong interaction between transition metals and metalloids such as silicon and boron results in strong segregation during repeated sliding, provides preferential transition metal-metalloid clustering in the amorphous alloy, and subsequently produces the diffused honeycomb structure formed by dark grey bands and primary crystals, that is, alpha-Fe in the matrix. Large plastic flow occurs on an amorphous alloy surface with sliding and the flow film of the alloy transfers to the aluminum oxide pin surface. Multiple slip bands due to shear deformation are observed on the side of the wear track. Two distinct types of wear debris were observed as a result of sliding: an alloy wear debris, and/or powdery-whiskery oxide debris.
Miyoshi, K.↗
Isotope analysis of crystalline impact melt rocks from Apollo 16 stations 11 and 13, North Ray Crater
The North Ray Crater Target Rock Consortium was formed to study a large number of rake samples collected at Apollo 16 stations 11 and 13 with comparative chemical, mineralogical, and chronological techniques in order to provide a larger data base for the discussion of lunar highland evolution in the vicinity of the Apollo 16 landing region. The present investigation is concerned with Rb-Sr and Sm-Nd isotopic analyses of a number of whole-rock samples of feldspathic microporhyritic (FM) impact melt, a sample type especially abundant among the North Ray crater (station 11) sample collection. Aspects of sample mineralogy and analytical procedures are discussed, taking into account FM impact melt rocks 6715 and 63538, intergranular impact melt rock 67775, subophitic impact melt rock 67747, subophitic impact melt rock 67559, and studies based on the utilization of electron microscopy and mass spectroscopy.
Reimold, W. U.↗
New outlook on control of crystalline and chemical perfection during growth of silicon
Significant progress has been made in our understanding of the Czochralski crystal growth process with the realization that the incorporation of oxygen into silicon is directly related to the internal gettering capability of wafers during device fabrication. It was also recognized that the electronic properties exhibited by silicon during various stages of device fabrication were significantly affected by the thermal history of the silicon during the post-growth cool-down period. Turbulent melt convection, induced by unavoidable destabilizing thermal gradients, was found to interfere with homogeneous dopant (and oxygen) incorporation and to influence markedly the dynamics of nonequilibrium point defects in the solidified silicon matrix during the cool-down period. In view of the unavoidability of destabilizing thermal gradients in conventional crystal growth configurations, melt stabilization through the application of magnetic fields is generally considered a viable approach. Control of heat input to the melt through heat pipe systems, as used during growth of germanium, cannot be applied to industrial growth of silicon. Recent studies have shown that heat exchange systems located coaxially about a growing crystal can be used to stabilize and control not only heat transfer in the grown crystal, but also in the melt adjacent to the solidification interface.
Witt, A. F.↗
Mechanical-contact-induced transformation from the amorphous to the partially crystalline state in metallic glass
Friction and wear tests were conducted with 3.2- and 6.4-millimeter-diameter aluminum oxide spheres sliding, in reciprocating motion, on a Fe67Co18B14Si1 metallic foil. Crystallites with a size range of 10 to 150 nanometers were produced on the wear surface of the amorphous alloy. A strong interaction between transition metals and metalloids such as silicon and boron results in strong segregation during repeated sliding, provides preferential transition metal-metalloid clustering in the amorphous alloy, and subsequently produces the diffused honeycomb structure formed by dark grey bands and primary crystals, that is, alpha-Fe in the matrix. Large plastic flow occurs on an amorphous alloy surface with sliding and the flow film of the alloy transfers to the aluminum oxide pin surface. Multiple slip bands due to shear deformation are observed on the side of the wear track. Two distinct types of wear debris were observed as a result of sliding: an alloy wear debris, and/or powdery-whiskery oxide debris.
Miyoshi, K.↗
Mercury - Absence of crystalline Fe(2+) in the regolith
A composite visible and near-IR (0.53-1.02 micron) reflectance spectrum of terrain on Mercury including smooth plains and intercrater plains was produced (with a theoretical resolution of 17 A) from 59 high-SNR spectra of the planet taken on November 24, 1984 at the 1.0-m telescope of the CTIO. No evidence was found in the spectrum for the proposed orthopyroxene absorption centered near 0.9 micron observed in older spectra of this terrain; the surface material is highly reduced, with any Fe present in metallic form.
Vilas, F.↗