Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cp”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Conditional probability density functional theory

Here we present conditional probability (CP) density functional theory (DFT) as a formally exact theory. In essence, CP-DFT determines the ground-state energy of a system by finding the CP density from a series of independent Kohn-Sham (KS) DFT calculations. By directly calculating CP densities, we bypass the need for an approximate XC energy functional. In this paper we discuss and derive several key properties of the CP density and corresponding CP-KS potential. Illustrative examples are used throughout to help guide the reader through the various concepts and theory presented. We explore a suitable CP-DFT approximation and discuss exact conditions, limitations, and results for selected examples.

36 MATERIALS SCIENCE↗

Charmless B{yields}K{sub h{eta}}{sup (')} decays with K{sub h}=K, K{sup *}, K{sub 0}{sup *}(1430), K{sub 2}{sup *}(1430)

We study the charmless decays B{yields}K{sub h{eta}} and B{yields}K{sub h{eta}}{sup '} within the framework of QCD factorization (QCDF) for K{sub h}=K, K{sup *}, K{sub 0}{sup *}(1430) and naive factorization for K{sub h}=K{sub 2}{sup *}(1430). There are three distinct types of penguin contributions: (i) b{yields}sqq{yields}s{eta}{sub q}, (ii) b{yields}sss{yields}s{eta}{sub s}, and (iii) b{yields}sqq{yields}qK{sub h}, where {eta}{sub q}=(uu+dd)/{radical}(2) and {eta}{sub s}=ss. B{yields}K{sup (*){eta}(')} decays are dominated by type-II and type-III penguin contributions. The interference, constructive for K{eta}{sup '} and K{sup *{eta}} and destructive for K{eta} and K{sup *{eta}'}, between type-II and type-III diagrams explains the pattern of {Gamma}(B{yields}K{eta}{sup '})>>{Gamma}(B{yields}K{eta}) and {Gamma}(B{yields}K{sup *{eta}'})<<{Gamma}(B{yields}K{sup *{eta}}). Within QCDF, the observed large rate of the K{eta}{sup '} mode can be naturally explained without invoking flavor-singlet contributions or something exotic. The decay pattern for B{yields}K{sub 0}{sup *}(1430){eta}{sup (')} decays depends on whether the scalar meson K{sub 0}{sup *}(1430) is an excited state of {kappa} or a lowest-lying P-wave qq state. Hence, the experimental measurements of B{yields}K{sub 0}{sup *}(1430){eta}{sup (')} can be used to explore the quark structure of K{sub 0}{sup *}(1430). If K{sub 0}{sup *}(1430) is a low-lying qq bound state, we find that K{sub 0}{sup *{eta}} has a rate slightly larger than K{sub 0}{sup *{eta}'} owing to the fact that the {eta}-{eta}{sup '} mixing angle in the {eta}{sub q}, {eta}{sub s} flavor basis is less than 45 degree sign , in agreement with experiment. The type-III penguin diagram does not contribute to B{yields}K{sub 2}{sup *{eta}(')} under the factorization hypothesis and the type-II diagram dominates. The ratio {Gamma}(B{yields}K{sub 2}{sup *{eta}'})/{Gamma}(B{yields}K{sub 2}{sup *{eta}}) is expected to be of order 2.5 as a consequence of (i) |f{sub {eta}}{sup 's}|>|f{sub {eta}}{sup s}| and (ii) a destructive (constructive) interference between type-I and type-II penguin diagrams for K{sub 2}{sup *{eta}} (K{sub 2}{sup *{eta}'}). However, the predicted rates of B{yields}K{sub 2}{sup *{eta}(')} in naive factorization are too small by 1 order of magnitude and this issue remains to be resolved. There are two K{sup (*){eta}(')} modes in which direct CP asymmetries have been measured with significance around 4{sigma}: A{sub CP}(K{sup -}{eta})=-0.37{+-}0.09 and A{sub CP}(K{sup *0}{eta})=0.19{+-}0.05. In QCDF, power corrections from penguin annihilation which are needed to resolve CP puzzles in K{sup -}{pi}{sup +} and {pi}{sup +}{pi}{sup -} modes will flip A{sub CP}(K{sup -}{eta}) into a wrong sign. We show that soft corrections to the color-suppressed tree amplitude a{sub 2} in conjunction with the charm content of the {eta} will finally lead to A{sub CP}(K{sup -}{eta})=-0.15{sub -0.28}{sup +0.19}. Likewise, this power correction is needed to improve the prediction for A{sub CP}(K{sup *0{eta}}).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A Rainbow Coverage Path Planning for a Patrolling Mobile Robot With Circular Sensing Range

In this paper, we proposed a coverage path (CP) planning approach for a mobile robot moving in a dynamically changing environment. Our family of algorithms begins by finding the first path around the center of interior obstacles/disks of a given target region (TR) through the Graham scan algorithm. The first path is then used as a foundational path to generate a collision free, first order differentiable, and observable CP through a complete set of input and output transformation algorithms which together form the rainbow CP planning approach. The last algorithm of the rainbow CP planning approach finds a sufficient number of observation points on the CP needed to observe the TR. The novelty of our rainbow CP planning approach is that it partitions the TR into different shapes with different properties needed to obtain complete coverage while achieving first order path differentiability. The main technical contributions of the proposed approach is to provide a holistic solution that segments any TR, uses triangulation to determine the line of sights and observation points, and computes the collision-free CP within a quadratic runtime. The proposed method can be readily generalized to address problems of higher dimensions, and it is scalable with respect to the size of TR and the number of robots. Computer simulations are used to illustrate the effectiveness and correctness of the proposed approach.

54 ENVIRONMENTAL SCIENCES↗

SURFACE FINISHING AND ELECTROLESS NICKEL PLATING OF ADDITIVELY MANUFACTURED (AM) METAL COMPONENTS

This study investigates the application of electroless nickel deposition on additively manufactured stainless steel samples. Current additive manufacturing (AM) technologies produce metal components with a rough surface. Rough surfaces generally exhibit fatigue characteristics, increasing the probability of initiating a crack or fracture to the printed part. For this reason, the direct use of as-produced parts in a finished product cannot be actualized, which presents a challenge. Post-processing of the AM parts is therefore required to smoothen the surface. This study analyzes chempolish (CP) and electropolish (EP) surface finishing techniques for post-processing AM stainless steel components CP has a great advantage in creating uniform, smooth surfaces regardless of size or part geometry EP creates an extremely smooth surface, which reduces the surface roughness to the sub-micrometer level. In this study, we also investigate nickel deposition on EP, CP, and as-built AM components using electroless nickel solutions. Electroless nickel plating is a method of alloy treatment designed to increase manufactured component's hardness and surface resistance to the unrelenting environment. The electroless nickel plating process is more straightforward than its counterpart electroplating.. We use low-phosphorus (2-5% P), medium-phosphorus (6-9% P), and high-phosphorus (10-13% P). These Ni deposition experiments were optimized using the L9 Taguchi design of experiments (TDOE), which compromises the prosperous content in the solution, surface finish, plane of the geometry, and bath temperature. The pre-and post-processed surface of the AM parts was characterized by KEYENCE Digital MicroscopeVHX-7000 and Phenom XL Desktop SEM. The experimental results show that electroless nickel deposition produces uniform Ni coating on the additively manufactured components up to 20 μm per hour. Mechanical properties of as-built and Ni coated AM samples were analyzed by applying a standard 10 N scratch test. Nickel coated AM samples were up to two times scratch resistant compared to the as-built samples. This study suggests electroless nickel plating is a robust viable option for surface hardening and finishing AM components for various applications and operating conditions.

Keywords: additive manufacturing, fatigue, chempol↗

Structure of a pentameric virion-associated fiber with a potential role in Orsay virus entry to host cells

Despite the wide use of Caenorhabditis elegans as a model organism, the first virus naturally infecting this organism was not discovered until six years ago. The Orsay virus and its related nematode viruses have a positive-sense RNA genome, encoding three proteins: CP, RdRP, and a novel δ protein that shares no homology with any other proteins. δ can be expressed either as a free δ or a CP-δ fusion protein by ribosomal frameshift, but the structure and function of both δ and CP-δ remain unknown. Using a combination of electron microscopy, X-ray crystallography, computational and biophysical analyses, here we show that the Orsay δ protein forms a ~420-Å long, pentameric fiber with an N-terminal α-helical bundle, a β-stranded filament in the middle, and a C-terminal head domain. The pentameric nature of the δ fiber has been independently confirmed by both mass spectrometry and analytical ultracentrifugation. Recombinant Orsay capsid containing CP-δ shows protruding long fibers with globular heads at the distal end. Mutant viruses with disrupted CP-δ fibers were generated by organism-based reverse genetics. These viruses were found to be either non-viable or with poor infectivity according to phenotypic and qRT-PCR analyses. Furthermore, addition of purified δ proteins to worm culture greatly reduced Orsay infectivity in a sequence-specific manner. Based on the structure resemblance between the Orsay CP-δ fiber and the fibers from reovirus and adenovirus, we propose that CP-δ functions as a cell attachment protein to mediate Orsay entry into worm intestine cells.

59 BASIC BIOLOGICAL SCIENCES↗

Molecular Dissection of the Arabidopsis 26S Proteasome

The 26S proteasome is a 2.5-MDa, ATP-dependent protease complex responsible for degrading many important cell regulators in plants and animals, especially those targeted by ubiquitylation. Its 64 or more subunits generate two subparticles: a 20S core protease (CP) that houses the proteolytic active sites and a 19S regulatory particle (RP) that binds to both ends of the CP and recruits appropriate substrates for breakdown. Despite its importance, we had only a rudimentary appreciation of the structure and functions of the core 26S proteasome from plants, and hints that the previously defined complex actually represents the nucleus of an even more elaborate and dynamic particle harboring multiple routes for substrate recognition and sophisticated mechanisms to control its assembly/location. Genomic analyses also suggested that plants in particular exploit this heterogeneity to generate a wide array of proteasome types, each with distinct compositions, locations, and/or functions/specificities. The goal of this DOE BES-funded research was to better define the 26S proteasome and its diversity in plants by a thorough analysis of the particle from Arabidopsis thaliana. During this completed work, we developed stringent affinity methods to rapidly isolate 26S proteasomes intact from Arabidopsis seedlings, and identified by mass spectrometry all the main CP and RP subunits along with a suite of interacting proteins. We also identified a number of post-translational modifications, and detected an alternative proteasome containing the CP capped by the PA200 protein. We then amassed a large collection of mutants eliminating most CP and RP subunits, and notable accessory proteins such as PA200. Phenotypic analyses of a few RP mutants support the notion that the Arabidopsis 26S proteasome is functionally heterogeneous. Through both genetic and biochemical analyses, we characterized a collection of shuttle proteins that help deliver ubiquitylated substrates, and discovered a subset of accessory proteins that likely act as chaperones that facilitate CP and RP assembly. These chaperone activities were supported by examining 26S proteasome assembly in plants missing these factors, which showed that the mutants accumulated high levels of partially assembled subparticles. In an effort to understand how the numerous genes encoding the various proteasome subunits are coordinately regulated to assemble the 64-subunit core complex and ultimately maintain adequate proteolytic capacity, we discovered by RNA-seq that most Arabidopsis genes required to synthesize the 26S proteasome are coordinately regulated transcriptionally. Through analysis of this ‘proteasome-stress’ regulon by protein-DNA binding, and reverse genetic methods, we identified the cis and trans-acting elements involved, that center around a pair of NAC transcription factors (NAC53 and NAC78) binding to a consensus proteasome-related cis element (PRCE) upstream of most proteasome-associated genes. And finally, we discovered that proteasomes are rapidly degraded by autophagy in response to nutrient stress or inactivation via a process we called proteaphagy. Whereas the former turnover is triggered by the ATG1-kinase complex working downstream of stress sensors such as the TOR kinase, the latter turnover is induced by substantial ubiquitylation of the complex followed by recognition of the appended ubiquitin moieties by the ubiquitin-binding autophagy receptor RPN10. Surprisingly, studies with RPN10 revealed that it represents the founding member of a new class of autophagy receptors that exploit a novel way to tether cargo to autophagic membranes. Instead of using the canonical AIM motif to bind ATG8 lining the autophagic membranes, it and relatives exploit a UIM motif to bind ATG8 at an alternative site. Studying the same inhibitor-induced proteaphagy in yeast revealed that an unrelated autophagy receptor Cue5 is required to recognize the bound ubiquitins. Strikingly, we found that carbon starvation also induces the accumulation novel cytoplasmic particles called proteasome storage granules that appear to protect proteasomes from autophagy. Their accumulation in yeast requires the CP-binding protein PA200 along with the RP-binding proteins Spg5. Taken together, this research revealed the composition of plant 26S proteasome, how it is assembled, and how is abundance is regulated both transcriptionally and by autophagy. Collectively, this research enhanced our appreciation of the plant 26S proteasome and its roles in ubiquitin-mediated protein turnover, and identified points of opportunity where its abundance or activity can be manipulated to improve food and biofuel crops.

59 BASIC BIOLOGICAL SCIENCES↗

Chapter 4: Physically informed deep learning networks for simulating microstructure evolution of 3D polycrystals

As discussed in the previous chapter, high energy diffraction microscopy (HEDM) is used to study the micromechanical evolution of a material during in situ loading. HEDM experiments have been used to verify crystal plasticity (CP) simulations [119, 91, 90, 120], for experimental planning, material design, and to further analyze experimental results. However, Fast Fourier transform-based CP (CP-FFT) or finite element-based CP (CP-FE) methods are often too slow to be used in real-time during an experiment. CP-FFT is faster than CP-FE simulations due to the absence of meshing, but can still take hours to simulate the response of a single volume depending on the size and number of strain steps [127]. Reducing computation time would create a larger exploration space in planning and design, and enable faster analysis of experimental results and real-time feedback during an experiment. This research expands upon previous works to develop a workflow for predicting the full-field evolution of a 3D polycrystal. The workflow is simplified from previous works to predict only orientation and elastic strain tensors (from which stress tensors are calculated). The network is physically informed through loss functions and network architecture for a more robust model. The orientation predictions are informed about the cubic crystal symmetry of the material by incorporating disorientation and misorientation information into the network architecture and loss. The Von Mises stress is used to enforce the correct stress-strain trends in the strain tensor predictions. Additional total strain steps from the elastic and elastoplastic region are included to better capture the stress-strain evolution at smaller total strain steps. Material and hardening parameters are additional inputs into the networks to further inform the network and to study the network’s ability to predict different materials other than those used for training.

36 MATERIALS SCIENCE↗

Nuclear Structure Studies for Schiff Moment Enhancement

One of the major open questions in modern physics is the origin of the matter-antimatter asymmetry observed in the universe. While the Standard Model contains sources of charge-parity (CP) violation, they appear insufficient to explain the observed dominance of matter over antimatter. As a result, searches for additional sources of CP violation are an important area of contemporary nuclear and particle physics. Atomic electric dipole moments (EDMs) provide sensitive probes of CP-violating interactions. In heavy nuclei, the observable atomic EDM can be enhanced through the presence of a nuclear Schiff moment, which arises from CP-violating nuclear forces and nuclear structure effects. The review paper Nuclear Schiff Moments and CP Violation by Jonathan Engel provides an overview of the theoretical framework connecting CP violation, nuclear structure, and Schiff moments. The long-term goal of this project is to contribute to the identification and characterization of nuclei that may exhibit enhanced Schiff moments. Such nuclei are often associated with strong octupole correlations or low-energy parity-doublet structures that can amplify CP-violating effects. This report summarizes progress made during the initial phase of the project, including a survey of candidate isotopes and preparation for nuclear-structure calculations using the HFODD code.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

T Tank Farm Interim Surface Barrier Demonstration - Vadose Zone Monitoring FY09 Report

DOE’s Office of River Protection constructed a temporary surface barrier over a portion of the T Tank Farm as part of the T Farm Interim Surface Barrier Demonstration Project. As part of the demonstration effort, vadose zone moisture is being monitored to assess the effectiveness of the barrier at reducing soil moisture. A solar-powered system was installed to continuously monitor soil water conditions at four locations (i.e., instrument Nests A, B, C, and D) beneath the barrier and outside the barrier footprint as well as site meteorological conditions. Nest A is placed in the area outside the barrier footprint and serves as a control, providing subsurface conditions outside the influence of the surface barrier. Nest B provides subsurface measurements to assess surface-barrier edge effects. Nests C and D are used to assess changes in soil-moisture conditions beneath the interim surface barrier. Each instrument nest is composed of a capacitance probe (CP) with multiple sensors, multiple heat-dissipation units (HDUs), and a neutron probe (NP) access tube. The monitoring results in FY09 are summarized below. The solar panels functioned normally and could provide sufficient power to the instruments. The CP in Nest C after September 20, 2009, was not functional. The CP sensors in Nest B after July 13 and the 0.9-m CP sensor in Nest D before June 10 gave noisy data. Other CPs were functional normally. All the HDUs were functional normally but some pressure-head values measured by HDUs were greater than the upper measurement-limit. The higher-than-upper-limit values might be due to the very wet soil condition and/or measurement error but do not imply the malfunction of the sensors. Similar to FY07 and FY08, in FY09, the soil under natural conditions (Nest A) was generally recharged during the winter period (October-March) and discharged during the summer period (April-September). Soil water conditions above about 1.5-m to 2-m depth from all three types of measurements (i.e., CP, NP and HDU) showed relatively large variation during the seasonal wetting-drying cycle. For the soil below 2-m depth, the seasonal variation of soil water content was relatively small. The construction of the surface barrier was completed in April 2008. In the soil below the surface barrier (Nests C and D), the CP measurements showed that water content at the soil between 0.6-m and 2.3-m depths was very stable, indicating no climatic impacts on soil water condition beneath the barrier. The NP-measured water content showed that soil water drainage seemed occurring in the soil between about 3.4 m (11 ft) and 9.1 m (30 ft) in FY09. The HDU-measured water pressure decreased consistently in the soil above 5-m depth, indicating soil water drainage at these depths of the soil. In the soil below the edge of the surface barrier (Nest B), the CP-measured water content was relatively stable through the year except at the 0.9-m depth; the NP-measured water content showed that soil water drainage was occurring in the soil between about 3.4 m (11 ft) and 9.1 m (30 ft) but at a slightly smaller magnitude than those in Nests C and D; the HDU-measurements show that the pressure head changes in FY09 in Nest B were less than those for C and D but more than those for A. The soil-water-pressure head was more sensitive to soil water regime changes under dry conditions. In the soil beneath the barrier, the theoretical steady-state values of pressure head is equal to the negative of the distance to groundwater table. Hence, it is expected that, in the future, while the water content become stable, the pressure head will keep decreasing for a long time (e.g., many years). These results indicate that the T Tank Farm surface barrier was performing as expected by intercepting the meteoric water from infiltrating into the soil and the soil was becoming drier gradually. The barrier also has some effects on the soil below the barrier edge but at a reduced magnitude.

54 ENVIRONMENTAL SCIENCES↗

Tutorial on Chemical Pressure Analysis: How Atomic Packing Drives Laves/Zintl Intergrowth in K3Au5Tl

The tight atomic packing generally exhibited by alloys and intermetallics can create the impression of their being composed of hard spheres arranged to maximize their density. As such, the atomic size factor has historically been central to explanations of the structural chemistry of these systems. However, the role atomic size plays structurally has traditionally been inferred from empirical considerations. The recently developed DFT-Chemical Pressure (CP) analysis has opened a path to investigating these effects with theory. In this article, we provide a step-by-step tutorial on the DFT-CP method for non-specialists, along with advances in the approach that broaden its applicability. A new version of the CP software package is introduced, which features an interactive system that guides the user in preparing the necessary electronic structure data and generating the CP scheme, with the results being readily visualized with a web browser (and easily incorporated into websites). For demonstration purposes, we investigate the origins of the crystal structure of K3Au5Tl, which represents an intergrowth of Laves and Zintl phase domains. Here, CP analysis reveals that the intergrowth is supported by complementary CP features of NaTl-type KTl and MgCu2-type KAu2 phases. In this way, K3Au5Tl exemplifies how CP effects can drive the merging for geometrical motifs derived from different families of intermetallics through a mechanism referred to as epitaxial stabilization.

36 MATERIALS SCIENCE↗

Inhibition of the C1s Protease and the Classical Complement Pathway by 6-(4-Phenylpiperazin-1-yl)Pyridine-3-Carboximidamide and Chemical Analogs

Abstract The classical pathway (CP) is a potent mechanism for initiating complement activity and is a driver of pathology in many complement-mediated diseases. The CP is initiated via activation of complement component C1, which consists of the pattern recognition molecule C1q bound to a tetrameric assembly of proteases C1r and C1s. Enzymatically active C1s provides the catalytic basis for cleavage of the downstream CP components, C4 and C2, and is therefore an attractive target for therapeutic intervention in CP-driven diseases. Although an anti-C1s mAb has been Food and Drug Administration approved, identifying small-molecule C1s inhibitors remains a priority. In this study, we describe 6-(4-phenylpiperazin-1-yl)pyridine-3-carboximidamide (A1) as a selective, competitive inhibitor of C1s. A1 was identified through a virtual screen for small molecules that interact with the C1s substrate recognition site. Subsequent functional studies revealed that A1 dose-dependently inhibits CP activation by heparin-induced immune complexes, CP-driven lysis of Ab-sensitized sheep erythrocytes, CP activation in a pathway-specific ELISA, and cleavage of C2 by C1s. Biochemical experiments demonstrated that A1 binds directly to C1s with a K d of ∼9.8 μM and competitively inhibits its activity with an inhibition constant (K i) of ∼5.8 μM. A 1.8-Å-resolution crystal structure revealed the physical basis for C1s inhibition by A1 and provided information on the structure–activity relationship of the A1 scaffold, which was supported by evaluating a panel of A1 analogs. Taken together, our work identifies A1 as a new class of small-molecule C1s inhibitor and lays the foundation for development of increasingly potent and selective A1 analogs for both research and therapeutic purposes.

Immunology↗

Late Holocene evolution of a coupled, mud-dominated delta plain–chenier plain system, coastal Louisiana, USA

Abstract. Major deltas and their adjacent coastal plains are commonly linked by means of coast-parallel fluxes of water, sediment, and nutrients. Observations of the evolution of these interlinked systems over centennial to millennial timescales are essential to understand the interaction between point sources of sediment discharge (i.e. deltaic distributaries) and adjacent coastal plains across large spatial (i.e. hundreds of kilometres) scales. This information is needed to constrain future generations of numerical models to predict coastal evolution in relation to climate change and other human activities. Here we examine the coastal plain (Chenier Plain, CP) adjacent to the Mississippi River delta, one of the world's largest deltas. We use a refined chronology based on 22 new optically stimulated luminescence and 22 new radiocarbon ages to test the hypothesis that cyclic Mississippi subdelta shifting has influenced the evolution of the adjacent CP. We show that over the past 3 kyr, accumulation rates in the CP were generally 0–1 Mt yr −1 . However, between 1.2 and 0.5 ka, when the Mississippi River shifted to a position more proximal to the CP, these rates increased to 2.9 ±1.1 Mt yr −1 or 0.5–1.5 % of the total sediment load of the Mississippi River. We conclude that CP evolution during the past 3 kyr was partly a direct consequence of shifting subdeltas, in addition to changing regional sediment sources and modest rates of relative sea-level (RSL) rise. The RSL history of the CP during this time period was constrained by new limiting data points from the base of overwash deposits associated with the cheniers. These findings have implications for Mississippi River sediment diversions that are currently being planned to restore portions of this vulnerable coast. Only if such diversions are located in the western portion of the Mississippi Delta plain could they potentially contribute to sustaining the CP shoreline. Our findings highlight the importance of a better understanding of mud-dominated shorelines that are often associated with major deltas, in light of the enormous investments in coastal management and restoration that will likely be made around the globe, now and especially later during this century.

Hijma, Marc P.↗

A proposition for the classification of carbonaceous chondritic micrometeorites

Classification of interplanetary dust particles (IDP's) should be unambiguous and, if possible, provide an opportunity to interrelate these ultrafine IDP's with the matrices of undifferentiated meteorites. I prefer a scheme of chemical groupings and petrologic classes that is based on primary IDP properties that can be determined without prejudice by individual investigators. For IDP's of 2-50 microns these properties are bulk elemental chemistry, morphology, shape, and optical properties. The two major chemical groups are readily determined by energy dispersive spectroscopic analysis using the scanning or analytical electron microscope. Refinement of chondritic IDP classification is possible using the dominant mineral species, e.g. olivine, pyroxene, and layer silicates, and is readily inferred from FTIR, and automated chemical analysis. Petrographic analysis of phyllosilicate-rich IDP's will identify smectite-rich and serpentine-rich particles. Chondritic IDP's are also classified according to morphology, viz., CP and CF IDP's are aggregate particles that differ significantly in porosity, while the dense CS IDP's have a smooth surface. The CP IDP's are characterized by an anhydrous silicate mineralogy, but small amounts of layer silicates may be present. Distinction between the CP and CF IDP's is somewhat ambiguous, but the unique CP IDP's are fluffy, or porous, ultrafine-grained aggregates. The CP IDP's, which may contain silicate whiskers, are the most carbon-rich extraterrestrial material presently known. The CF IDP's are much less porous that CP IDP's. Using particle type definitions, CP IDP's in the NASA JSC Cosmic Dust Catalogs are approx. 15 percent of all IDP's that include nonchondritic spheres. Most aggregate particles are of the CF type.

Rietmeijer, Frans J. M.↗

Solubility and cation exchange in phosphate rock and saturated clinoptilolite mixtures

Mixtures of zeolite and phosphate rock (PR) have the potential to provide slow-release fertilization of plants in synthetic soils by dissolution and ion-exchange reactions. This study was conducted to examine solubility and cation-exchange relationships in mixtures of PR and NH4- and K-saturated clinoptilolite (Cp). Batch-equilibration experiments were designed to investigate the effect of PR source, the proportion of exchangeable K and NH4, and the Cp to PR ratio on solution N, P, K, and Ca concentrations. The dissolution and cation-exchange reactions that occurred after mixing NH4- and K-saturated Cp with PR increased the solubility of the PR and simultaneously released NH4 and K into solution. The more reactive North Carolina (NC) PR rendered higher solution concentrations of NH4 and K when mixed with Cp than did Tennessee (TN) PR. Solution P concentrations for the Cp-NC PR mixture and the Cp-TN PR mixture were similar. Solution concentrations of N, P, K, and Ca and the ratios of these nutrients in solution varied predictably with the type of PR, the Cp/PR ratio, and the proportions of exchangeable K and NH4 on the Cp. Our research indicated that slow-release fertilization using Cp/PR media may provide adequate levels of N, P, and K to support plant growth. Solution Ca concentrations were lower than optimum for plant growth.

NASA Discipline Number 61-10↗

Comparing and Integrating Constraint Programming and Temporal Planning for Quantum Circuit Compilation

Recently, the makespan-minimization problem of compiling a general class of quantum algorithms into near-term quantum processors has been introduced to the AI community. The research demonstrated that temporal planning is a strong solution approach for the studied class of quantum circuit compilation (QCC) problems. In this paper, we explore the use of methods from operations research, specifically constraint programming (CP), as an alternative and complementary approach to temporal planning. We also extend previous work by introducing two new problem variations that incorporate important characteristics identified by the quantum computing community. We apply temporal planning and CP to the baseline and extended QCC problems as both stand-alone and hybrid approaches. The hybrid method uses solutions found by temporal planning to warm-start CP, leveraging the ability of temporal planning to find satisficing solutions to problems with a high degree of task optionality, an area that CP typically struggles with. These solutions are then used to seed the CP formulation which significantly benefits from inferred bounds on planning horizon and task counts provided by the warm-start. Our extensive empirical evaluation indicates that while stand-alone CP is not competitive with temporal planning, except for the smallest problems, CP in a hybrid setting is beneficial for all temporal planners in all problem classes.

quantum circuit compilation↗

A Gene Expression and Histologic Approach to Study Production and Outflow of Cerebrospinal Fluid in Hindlimb Suspended Rats

INTRODUCTION: The Spaceflight Associated Neuro-ocular Syndrome (SANS) is thought to be associated with weightlessness-induced cephalad fluid shift, possibly associated with a chronic elevation of intracranial pressure (ICP) during long-duration ISS missions. Changes in cerebrospinal fluid (CSF) dynamics and cranial compliance might be involved in the ICP increase. It is not known whether CSF production and/or outflow are altered in microgravity, but changes at the molecular and cellular level in the structures that produce and regulate the transcellular and paracellular secretion and reabsorption of CSF may be relevant. In this study, we used the rat hindlimb suspension (HS) model to examine the relationship between intracranial pressure (ICP) and the cellular responses to the prolonged change in body posture elicited specifically in the choroid plexus (CP). This was evaluated by transcriptomics, histopathology and ultrastructure of the CP and arachnoid villi (AV). METHODS: ICP was measured by telemetry. The morphology, ultrastructure, and gene expression profile of the CP was examined using male 9-month-old Long Evans rats subjected to HS for 14 and 90 days. A subset of animals completing 90-day HS returned to normal posture for 14 and 90 additional days of recovery. All HS rats had age-matched cage controls maintained in normal posture. A group of animals was maintained in conditions of 1% CO2 throughout the entire protocol. The rat brains were carefully removed and preserved for various analyses, including transmission electron microscopy (TEM), immunohistochemical analysis of specific targets involved in CSF regulation, and RNA sequencing analysis of laser capture micro-dissected CP tissue from the lateral ventricles. SUMMARY OF RESULTS: The ICP record was limited, which impacted any conclusions derived from the results. However, the ICP of rats in the CO2-enriched atmosphere appeared increased compared to those in a normal air composition. HS of rats resulted in an altered transcriptomics profile in the choroid plexus compared to animals maintained at normal posture. This was observed during both the HS period and during normal posture recovery period following 90 days of suspension. The greatest number of differentially expressed genes was observed at 90 days HS. Elevated CO2 also led to a different transcriptomics profile in the CP. The histology and ultrastructure results should be considered preliminary due to the limited number of samples. Examination of the CP by TEM showed blood vessel congestion and microvilli swelling in the CP, as well as some subpial and periventricular gliosis, but no associations were observed with treatment. There was no evidence of a reduced clearance of b-amyloid in the periventricular, perivascular and subpial regions of the brain in HS animals versus those in normal posture. Immunohistochemical staining of aquaporin 4, showed the localization to the subpial region and ependyma with increased immunoreactivity in the brains of CO2 exposed rats. This work was supported by awards NNX15AW48G to S.Z. Animal tissue and live data was provided under a tissue/data sharing agreement with Dr. Charles Fuller, UC Davis.

S B Zanello↗

A Gene Expression and Histologic Approach to Study Production and Outflow of Cerebrospinal Fluid in Hindlimb Suspended RATS

INTRODUCTION: The Spaceflight Associated Neuro-ocular Syndrome (SANS) is thought to be associated with weightlessness-induced cephalad fluid shift, possibly associated with a chronic elevation of intracranial pressure (ICP) during long-duration ISS missions. Changes in cerebrospinal fluid (CSF) dynamics and cranial compliance might be involved in the ICP increase. It is not known whether CSF production and/or outflow are altered in microgravity, but changes at the molecular and cellular level in the structures that produce and regulate the transcellular and paracellular secretion and reabsorption of CSF may be relevant. In this study, we used the rat hindlimb suspension (HS) model to examine the relationship between intracranial pressure (ICP) and the cellular responses to the prolonged change in body posture elicited specifically in the choroid plexus (CP). This was evaluated by transcriptomics, histopathology and ultrastructure of the CP and arachnoid villi (AV). METHODS: ICP was measured by telemetry. The morphology, ultrastructure, and gene expression profile of the CP was examined using male 9-month-old Long Evans rats subjected to HS for 14 and 90 days. A subset of animals completing 90-day HS returned to normal posture for 14 and 90 additional days of recovery. All HS rats had age-matched cage controls maintained in normal posture. A group of animals was maintained in conditions of 1% CO2 throughout the entire protocol. The rat brains were carefully removed and preserved for various analyses, including transmission electron microscopy (TEM), immunohistochemical analysis of specific targets involved in CSF regulation, and RNA sequencing analysis of laser capture micro-dissected CP tissue from the lateral ventricles. SUMMARY OF RESULTS: The ICP record was limited, which impacted any conclusions derived from the results. However, the ICP of rats in the CO2-enriched atmosphere appeared increased compared to those in a normal air composition. HS of rats resulted in an altered transcriptomics profile in the choroid plexus compared to animals maintained at normal posture. This was observed during both the HS period and during normal posture recovery period following 90 days of suspension. The greatest number of differentially expressed genes was observed at 90 days HS. Elevated CO2 also led to a different transcriptomics profile in the CP. The histology and ultrastructure results should be considered preliminary due to the limited number of samples. Examination of the CP by TEM showed blood vessel congestion and microvilli swelling in the CP, as well as some subpial and periventricular gliosis, but no associations were observed with treatment. There was no evidence of a reduced clearance of b-amyloid in the periventricular, perivascular and subpial regions of the brain in HS animals versus those in normal posture. Immunohistochemical staining of aquaporin 4, showed the localization to the subpial region and ependyma with increased immunoreactivity in the brains of CO2 exposed rats. This work was supported by awards NNX15AW48G to S.Z. Animal tissue and live data was provided under a tissue/data sharing agreement with Dr. Charles Fuller, UC Davis.

S B Zanello↗

Splitting a C-O bond in dialkylethers with bis(1,2,4-tri-t-butylcyclopentadienyl) cerium-hydride does not occur by a sigma-bond metathesis pathway: a combined experimental and DFT computational study

Addition of diethylether to [1,2,4(Me3C)3C5H2]2CeH, abbreviated Cp'2CeH, gives Cp'2CeOEt and ethane. Similarly, di-n-propyl- or di-n-butylether gives Cp'2Ce(O-n-Pr) and propane or Cp'2Ce(O-n-Bu) and butane, respectively. Using Cp'2CeD, the propane and butane contain deuterium predominantly in their methyl groups. Mechanisms, formulated on the basis of DFT computational studies, show that the reactions begin by an alpha or beta-CH activation with comparable activation barriers but only the beta-CH activation intermediate evolves into the alkoxide product and an olefin. The olefin then inserts into the Ce-H bond forming the alkyl derivative, Cp'2CeR, that eliminates alkane. The alpha-CH activation intermediate is in equilibrium with the starting reagents, Cp'2CeH and the ether, which accounts for the deuterium label in the methyl groups of the alkane. The one-step sigma-bond metathesis mechanism has a much higher activation barrier than either of the two-step mechanisms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗