Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “core sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Dependence of Electronic Structure of SrRuO3 and the Degree of Correlation on Cation Off-Stoichiometry

We have grown and studied high quality SrRuO{sub 3} films grown by MBE as well as PLD. By changing the oxygen activity during deposition we were able to make SrRuO{sub 3} samples that were stoichiometric (low oxygen activity) or with ruthenium vacancies (high oxygen activity). Samples with strontium vacancies were found impossible to produce since the ruthenium would precipitate out as RuO{sub 2}. The volume of the unit cell of SrRuO{sub 3} becomes larger as more ruthenium vacancies are introduced. The residual resistivity ratio (RRR) and room temperature resistivity were found to systematically depend on the volume of the unit cell and therefore on the amount of ruthenium vacancies. The RRR varied from {approx}30 for stoichiometric samples to less than two for samples that were very ruthenium poor. The room temperature resistivity varied from 190 {micro}{Omega} cm for stoichoimetric samples to over 300 {micro}{Omega} cm for very ruthenium poor samples. UPS spectra show a shift of weight from the coherent peak to the incoherent peak around the Fermi level when samples have more ruthenium vacancies. Core level XPS spectra of the ruthenium 3d lines show a strong screened part in the case of stoichiometric samples. This screened part disappears when ruthenium vacancies are introduced. Both the UPS and the XPS results are consistent with the view that correlation increases as the amount of ruthenium vacancies increase.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Localized reactive flow in carbonate rocks: Core-flood experiments and network simulations

We conducted four core-flood experiments on samples of a micritic, reef limestone from Abu Dhabi under conditions of constant flow rate. The pore fluid was water in equilibrium with CO 2 , which, because of its lowered pH, is chemically reactive with the limestone. Flow rates were between 0.03 and 0.1 mL/min. The difference between up and downstream pore pressures dropped to final values <<1 MPa over periods of 3–18 h. Scanning electron microscope and microtomography imaging of the starting material showed that the limestone is mostly calcite and lacks connected macroporosity and that the prevailing pores are few microns large. During each experiment, a wormhole formed by localized dissolution, an observation consistent with the decreases in pressure head between the up and downstream reservoirs. Moreover, we numerically modeled the changes in permeability during the experiments. We devised a network approach that separated the pore space into competing subnetworks of pipes. Thus, the problem was framed as a competition of flow of the reactive fluid among the adversary subnetworks. The precondition for localization within certain time is that the leading subnetwork rapidly becomes more transmissible than its competitors. This novel model successfully simulated features of the shape of the wormhole as it grew from few to about 100 µm, matched the pressure history patterns, and yielded the correct order of magnitude of the breakthrough time. Finally, we systematically studied the impact of changing the statistical parameters of the subnetworks. Larger mean radius and spatial correlation of the leading subnetwork led to faster localization.

58 GEOSCIENCES↗

An Exceptional Synergy of High Strength, Ductility and Toughness in a Gradient-Structured Low-Carbon Steel

Generally, the improvement in the strength comes at the cost of the ductility and toughness for most metallic materials. Here, an exceptional synergy of high strength (σ{sub y} ~ 453.8 MPa), ductility (ε{sub f} ~ 24.5%) and static toughness (U{sub r} ~ 115.0 MJ/m{sup 3}) is achieved in a low-carbon steel subjected to torsion deformation and annealing treatments, compared with that (σ{sub y} ~ 282.4 MPa, ε{sub f} ~ 27.3% and U{sub r} ~ 102.9 MJ/m{sup 3}) of its coarse-grained counterpart. The enhancement of mechanical properties is attributed to the formation of a specific gradient structure with a thickness of ~ 3 mm, that is, the ferrite size increases while the volume fraction of the pearlite decreases continuously with the depth from the sample surface to the core. The strengthening and toughening mechanisms of the gradient-structured low-carbon steel are also discussed.

36 MATERIALS SCIENCE↗

Rare earth elements and radiogenic strontium isotopes in carbonate minerals reveal diagenetic influence in shales and limestones in the Appalachian Basin

Rare earth element (REE) signatures are often applied to interpret paleoenvironmental conditions in sedimentary basins, however the complicated diagenetic histories in dynamic depositional environments can affect interpretation of measured REE signatures. Prior studies on REE content in shales and limestones indicated that REE in specific mineral phases may provide unique information concerning diagenetic reactions occurring in sedimentary rocks during burial and compaction. Application of sequential extraction techniques to target REE signatures in specific mineral fractions may provide greater insight into the complex processes that occurred during diagenesis and catagenesis. Thus, using this technique, this study provides a detailed account for REE, 87 Sr/ 86 Sr, and δ 13 C in the carbonate fraction of the Marcellus Shale and adjacent formations in the Appalachian Basin. A suite of 49 rock samples collected from two cores recovered from Monongalia County, West Virginia, USA was analyzed. The results showed that the carbonate concretions in calcareous shales and carbonate cements in black shales were very distinct. The REE plus yttrium (REY) were more concentrated in the carbonate concretions than in the carbonate cements. The carbonate concretions displayed REY patterns that are closely similar to modern seawater, while MREE-enrichment was observed in the carbonate cements. Likewise, the 87 Sr/ 86 Sr values in the carbonate concretions were similar to those measured for unaltered Middle Devonian carbonates, while the 87 Sr/ 86 Sr in the carbonate cements were much more radiogenic. This observation indicates that the carbonate cement could have been inherited radiogenic 87 Sr expulsed from clays during illite-smectite transition. Overall, this study demonstrated two distinct processes involved with controlling the carbonate geochemistry within Appalachian Basin shales and limestones: one fraction displaying minimal diagenetic alteration relative to depositional conditions (carbonate concretions in calcareous shales and limestone carbonate in limestones), and another fraction displaying the evidence for extensive chemical alteration during illite-smectite transition and catagenesis (carbonate cements in black shales). Here, in addition, highly variable and significant enrichments of U and Mo demonstrate that the Union Spring member and the Lower Oatka Creek member of the Marcellus Shale in the southwestern Appalachian Basin (MSEEL site) were deposited under mainly anoxic environment whereas intermitted episodes of dysoxic to perhaps oxic conditions occurred during the deposition of the Upper Oatka Creek member.

58 GEOSCIENCES↗

Effect of gamma radiation on the photocatalytic properties of Cu doped titania nanoparticles

Highlights: • Defective Cu doped TiO{sub 2} powders were prepared by sol-gel route and gamma treatment. • Nanoscale analysis show evidence of internal doping by Cu{sup 2+} in the TiO{sub 2} sublattice. • Catalyst surfaces defect sites improve significantly the photocatalytic efficiency. • (Cu{sup 2+}, V{sub O}{sup -}) cooperative effects promote the photoelectrochemical properties of TiO{sub 2}. - Abstract: The aim of this paper is to study the effect of gamma-rays on structural, physicochemical, optical and photocatalytic performance of TiO{sub 2} nanoparticles doped with different concentrations of copper ranging from 0 to 6 at.%. The powders have been prepared by sol-gel technique and annealed at 400 °C. They were irradiated by gamma-rays with doses varying from 14 to 60 KGy. These investigations confirm the formation of anatase TiO{sub 2} nanoparticles and Cu{sup 2+} ion substitution for Ti{sup 4+} sites within the TiO{sub 2} structure. This study also shows that, once the TiO{sub 2} structure is saturated with copper, a metallic copper segregation is formed at the crystallite surfaces. After gamma irradiation, samples present a crystalline core and a disordered shell structure as a result of the formation of oxygen vacancies. Such oxygen vacancies at the TiO{sub 2} nanocrystal surface lead to a remarkable enhancement of the photocatalytic activity of Cu-doped TiO{sub 2} catalysts.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

CHARACTERIZING THE CONTAMINATING DISTANCE DISTRIBUTION FOR BAYESIAN SUPERNOVA COSMOLOGY

Measurements of the equation of state of dark energy from surveys of thousands of Type Ia Supernovae will be limited by spectroscopic follow-up and must therefore rely on photometric identification, increasing the chance that the sample is contaminated by core collapse supernovae (CC SNe). Bayesian methods for SN cosmology can remove contamination bias while maintaining high statistical precision but are sensitive to the choice of parameterization of the contaminating distance distribution. We use simulations to investigate the form of the contaminating distribution and its dependence on the absolute magnitudes, light curve shapes, colors, extinction, and redshifts of CC SNe. We find that the CC luminosity function (LF) dominates the distance distribution function, but its shape is increasingly distorted as the redshift increases and more CC SNe fall below the survey magnitude limit. The shapes and colors of the CC light curves generally shift the distance distribution, and their effect on the CC distances is correlated. We compare the simulated distances to the first year results of the SDSS-II SN survey and find that the SDSS distance distributions can be reproduced with simulated CC SNe that are {approx}1 mag fainter than the standard Richardson et al. LFs, which do not produce a good fit. To exploit the full power of the Bayesian parameter estimation method, parameterization of the contaminating distribution should be guided by the current knowledge of the CC LFs, coupled with the effects of the survey selection and magnitude limit, and allow for systematic shifts caused by the parameters of the distance fit.

79 ASTRONOMY AND ASTROPHYSICS↗

CALTECH CORE-COLLAPSE PROJECT (CCCP) OBSERVATIONS OF TYPE IIn SUPERNOVAE: TYPICAL PROPERTIES AND IMPLICATIONS FOR THEIR PROGENITOR STARS

Type IIn supernovae (SNe IIn) are rare events, constituting only a few percent of all core-collapse SNe, and the current sample of well-observed SNe IIn is small. Here, we study the four SNe IIn observed by the Caltech Core-Collapse Project (CCCP). The CCCP SN sample is unbiased to the extent that object selection was not influenced by target SN properties. Therefore, these events are representative of the observed population of SNe IIn. We find that a narrow P-Cygni profile in the hydrogen Balmer lines appears to be a ubiquitous feature of SNe IIn. Our light curves show a relatively long rise time (>20 days) followed by a slow decline stage (0.01-0.15 mag day{sup -1}), and a typical V-band peak magnitude of M{sub V} = -18.4 {+-} 1.0 mag. We measure the progenitor star wind velocities (600-1400 km s{sup -1}) for the SNe in our sample and derive pre-explosion mass-loss rates (0.026-0.12 M{sub Sun} yr{sup -1}). We compile similar data for SNe IIn from the literature and discuss our results in the context of this larger sample. Our results indicate that typical SNe IIn arise from progenitor stars that undergo luminous-blue-variable-like mass loss shortly before they explode.

79 ASTRONOMY AND ASTROPHYSICS↗

THE RADIO PROPERTIES OF RADIO-LOUD NARROW-LINE SEYFERT 1 GALAXIES ON PARSEC SCALES

We present the detection of the compact radio structures of 14 radio-loud narrow-line Seyfert 1 (NLS1) galaxies from Very Long Baseline Array (VLBA) observations at 5 GHz performed in 2013. While 50% of the sources of our sample show a compact core only, the remaining 50% exhibit a core-jet structure. The measured brightness temperatures of the cores range from 10{sup 8.4} to 10{sup 11.4} K with a median value of 10{sup 10.1} K, indicating that the radio emission is from non-thermal jets, and that, likely, most sources are not strongly beamed, thus implying a low jet speed in these radio-loud NLS1 galaxies. In combination with archival data taken at multiple frequencies, we find that seven sources show flat or even inverted radio spectra, while steep spectra are revealed in the remaining seven objects. Although all of these sources are very radio-loud with R > 100, their jet properties are diverse in terms of their milliarcsecond (mas) scale (parsec scale) morphology and their overall radio spectral shape. The evidence for slow jet speeds (i.e., less relativistic jets), in combination with the low kinetic/radio power, may offer an explanation for the compact VLBA radio structure in most sources. The mildly relativistic jets in these high accretion rate systems are consistent with a scenario where jets are accelerated from the hot corona above the disk by the magnetic field and the radiation force of the accretion disk. Alternatively, a low jet bulk velocity can be explained by low spin in the Blandford–Znajek mechanism.

79 ASTRONOMY AND ASTROPHYSICS↗

Core-collapse supernovae in the Dark Energy Survey: luminosity functions and host galaxy demographics

ABSTRACT We present the luminosity functions and host galaxy properties of the Dark Energy Survey (DES) core-collapse supernova (CCSN) sample, consisting of 69 Type II and 50 Type Ibc spectroscopically and photometrically confirmed supernovae over a redshift range 0.045 < z < 0.25. We fit the observed DES griz CCSN light curves and K-correct to produce rest-frame R-band light curves. We compare the sample with lower redshift CCSN samples from Zwicky Transient Facility (ZTF) and Lick Observatory Supernova Search (LOSS). Comparing luminosity functions, the DES and ZTF samples of SNe II are brighter than that of LOSS with significances of 3.0σ and 2.5σ, respectively. While this difference could be caused by redshift evolution in the luminosity function, simpler explanations such as differing levels of host extinction remain a possibility. We find that the host galaxies of SNe II in DES are on average bluer than in ZTF, despite having consistent stellar mass distributions. We consider a number of possibilities to explain this – including galaxy evolution with redshift, selection biases in either the DES or ZTF samples, and systematic differences due to the different photometric bands available – but find that none can easily reconcile the differences in host colour between the two samples and thus its cause remains uncertain.

79 ASTRONOMY AND ASTROPHYSICS↗

A 50 kA Superconducting Transformer for the Upcoming High-Field High-Current Testing Station at the BNL

Brookhaven national laboratory is upgrading its existing user facility to support R&D for High Energy Physics (HEP) and Fusion Energy Sciences (FES). The goal of this upgrade is to host the testing of the superconducting cables, conductors, joints and insert coils under high magnetic field (10 T), with currents up to 50 kA (present limit 20 kA) and at temperatures varying from 4 K to 40 K. To provide a current up to 50 kA to the sample, a superconducting core-less transformer is under construction. The superconducting transformer would additionally reduce the heat loss at the current leads at high currents. The SC transformer consists of two coaxial coils. The primary coil is inside the secondary coil. The primary coil consists of 3048 turns of rectangular wires (1.91 mm x 1.27 mm), wound in 24 layers. The secondary coil consists of 13 turns of the secondary cable (18.35 mm x 5.96 mm), wound in one layer. The parameters of the transformer are chosen to satisfy the space restrictions while using the available conductor. Here this paper presents the design of the 50-kA transformer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Sample-morphology effects on x-ray photoelectron peak intensities. III. Simulated spectra of model core–shell nanoparticles

The National Institute of Standards and Technology database for the simulation of electron spectra for surface analysis has been used to simulate Cu 2p photoelectron spectra for four types of spherical copper–gold nanoparticles (NPs). These simulations were made to extend the work of Tougaard [J. Vac. Sci. Technol. A 14, 1415 (1996)] and of Powell et al. [J. Vac. Sci. Technol. A 31, 021402 (2013)] who performed similar simulations for four types of planar copper–gold films. The Cu 2p spectra for the NPs were compared and contrasted with analogous results for the planar films and the effects of elastic scattering were investigated. The new simulations were made for a monolayer of three types of Cu/Au core–shell NPs on a Si substrate: (1) an Au shell of variable thickness on a Cu core with diameters of 0.5, 1.0, 2.0, 5.0, and 10.0 nm; (2) a Cu shell of variable thickness on an Au core with diameters of 0.5, 1.0, 2.0, 5.0, and 10.0 nm; and (3) an Au shell of variable thickness on a 1 nm Cu shell on an Au core with diameters of 0.5, 1.0, 2.0, 5.0, and 10.0 nm. For these three morphologies, the outer-shell thickness was varied until the Cu 2p{sub 3/2} peak intensity was the same (within 2%) as that found in our previous work with planar Cu/Au morphologies. The authors also performed similar simulations for a monolayer of spherical NPs consisting of a CuAu{sub x} alloy (also on a Si substrate) with diameters of 0.5, 1.0, 2.0, 5.0, and 10.0 nm. In the latter simulations, the relative Au concentration (x) was varied to give the same Cu 2p{sub 3/2} peak intensity (within 2%) as that found previously. For each morphology, the authors performed simulations with elastic scattering switched on and off. The authors found that elastic-scattering effects were generally strong for the Cu-core/Au-shell and weak for the Au-core/Cu-shell NPs; intermediate elastic-scattering effects were found for the Au-core/Cu-shell/Au-shell NPs. The shell thicknesses required to give the selected Cu 2p{sub 3/2} peak intensity for the three types of core–shell NPs were less than the corresponding film thicknesses of planar samples since Cu 2p photoelectrons can be detected from the sides and, for the smaller NPs, bottoms of the NPs. Elastic-scattering effects were also observed on the Au atomic fractions found for the CuAu{sub x} NP alloys with different diameters.

36 MATERIALS SCIENCE↗

Proposal and application of ROM-Lasso method for sensitivity coefficient evaluation

We propose a novel method for evaluating sensitivity coefficients of neutronics parameters to cross sections, so-called the reduced-order modeling technique ROM-Lasso. In this method, cross sections of interest are randomly sampled, and corresponding perturbed core analyses are performed. Then, the sensitivity coefficient vector of the higher-level model is expanded via the active subspace bases obtained with the lower-level model whose dimensional complexity is smaller than that of the higher-level model, and the expansion coefficients are estimated by the Lasso regression. A unique feature of the ROM-Lasso method allows the use of different bases optimized for each neutronics parameter. We conducted a verification calculation for an accelerator-driven system and demonstrated that the ROM-Lasso method can reproduce the sensitivity coefficients with a much smaller number of forward calculations than the direct method. The proposed method can be used to practically evaluate sensitivity coefficients. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Physiochemical Evidence of Faulting Processes and Modeling of Fluid in Evolving Fault Systems in Southern California

Our study targets recent (Plio-Pleistocene) faults and young (Tertiary) petroleum fields in southern California. Faults include the Refugio Fault in the Transverse Ranges, the Ellwood Fault in the Santa Barbara Channel, and most recently the Newport- Inglewood in the Los Angeles Basin. Subsurface core and tubing scale samples, outcrop samples, well logs, reservoir properties, pore pressures, fluid compositions, and published structural-seismic sections have been used to characterize the tectonic/diagenetic history of the faults. As part of the effort to understand the diagenetic processes within these fault zones, we have studied analogous processes of rapid carbonate precipitation (scaling) in petroleum reservoir tubing and manmade tunnels. From this, we have identified geochemical signatures in carbonate that characterize rapid CO 2 degassing. These data provide constraints for finite element models that predict fluid pressures, multiphase flow patterns, rates and patterns of deformation, subsurface temperatures and heat flow, and geochemistry associated with large fault systems.

01 COAL, LIGNITE, AND PEAT↗

Development of advanced strain diagnostic techniques for reactor environments

The following research is operated as a Laboratory Directed Research and Development (LDRD) initiative at Sandia National Laboratories. The long-term goals of the program include sophisticated diagnostics of advanced fuels testing for nuclear reactors for the Department of Energy (DOE) Gen IV program, with the future capability to provide real-time measurement of strain in fuel rod cladding during operation in situ at any research or power reactor in the United States. By quantifying the stress and strain in fuel rods, it is possible to significantly improve fuel rod design, and consequently, to improve the performance and lifetime of the cladding. During the past year of this program, two sets of experiments were performed: small-scale tests to ensure reliability of the gages, and reactor pulse experiments involving the most viable samples in the Annulated Core Research Reactor (ACRR), located onsite at Sandia. Strain measurement techniques that can provide useful data in the extreme environment of a nuclear reactor core are needed to characterize nuclear fuel rods. This report documents the progression of solutions to this issue that were explored for feasibility in FY12 at Sandia National Laboratories, Albuquerque, NM.

Fleming, Darryn D.↗

Iron isotope evidence of an impact origin for main-group pallasites

Despite decades of work, the origin of pallasite meteorites has remained enigmatic. Long thought to be samples of the core-mantle boundary of differentiated asteroids, more recent studies have suggested a range of mechanisms for pallasite formation. These include olivine-metal mixing during a planetesimal collision and the intrusion of over-pressured core liquids into a planetesimal mantle. Establishing if the olivine and metal that comprise pallasites were once equilibrated at high temperature remains key to discriminating between these hypotheses. We determined the iron isotope compositions of olivine and metal in eleven main-group pallasites and found, in all cases, that olivine is isotopically lighter than metal. To interpret these data, we constrained the olivine-metal equilibrium Fe isotope fractionation with ab initio calculations and high temperature experiments. These independent approaches show that olivine preferentially incorporates the heavy isotopes of iron relative to metal. Our results demonstrate that pallasitic olivine and metal never achieved isotopic equilibrium with respect to iron. This precludes extended cooling at high temperature and is best reconciled with an impact origin for the main-group pallasites.

58 GEOSCIENCES↗

The role of macrobiota in structuring microbial communities along rocky shores

Rocky shore microbial diversity presents an excellent system to test for microbial habitat specificity or generality, enabling us to decipher how common macrobiota shape microbial community structure. At two coastal locations in the northeast Pacific Ocean, we show that microbial composition was significantly different between inert surfaces, the biogenic surfaces that included rocky shore animals and an alga, and the water column plankton. While all sampled entities had a core of common OTUs, rare OTUs drove differences among biotic and abiotic substrates. For the mussel Mytilus californianus, the shell surface harbored greater alpha diversity compared to internal tissues of the gill and siphon. Strikingly, a 7-year experimental removal of this mussel from tidepools did not significantly alter the microbial community structure of microbes associated with inert surfaces when compared with unmanipulated tidepools. However, bacterial taxa associated with nitrate reduction had greater relative abundance with mussels present, suggesting an impact of increased animal-derived nitrogen on a subset of microbial metabolism. Because the presence of mussels did not affect the structure and diversity of the microbial community on adjacent inert substrates, microbes in this rocky shore environment may be predominantly affected through direct physical association with macrobiota.

59 BASIC BIOLOGICAL SCIENCES↗

Apollo 12 soil and breccia

Apollo 12 lunar soil and breccia core tube and surface samples optical and electron microscope and microprobe analysis, relating data to geologic processes

Clanton, U. S.↗

Geochemistry of HASP, VLT, and other glasses from double drive tube 79001/2

The Apollo 17 double drive tube 79001/2 (station 9, Van Serg Crater) is distinctive because of its extreme maturity, abundance, and variety of glass clasts. It contains mare glasses of both high Ti and very low Ti (VLT) compositions, and highland glasses of all compositions common in lunar regolith samples: highland basalt (feldspathic; Al2O3 greater than 23 wt percent), KREEP (Al2O3 less than 23 wt percent, K2O greater than 0.25 wt percent), and low-K Fra Mauro (LKFM; Al2O3 less than 23 wt percent, K2O less than 0.25 wt percent). It also contains rare specimens of high-alumina, silica-poor (HASP), and ultra Mg glasses. HASP glasses contain insufficient SiO2 to permit the calculation of a standard norm, and are thought to be the product of volatilization during impact melting. They have been studied by electron microprobe major-element analysis techniques but have not previously been analyzed for trace elements. The samples analyzed for this study were polished grain mounts of the 90-160 micron fraction of four sieved samples from the 79001/2 core (depth range 2.3-11.5 cm). A total of 80 glasses were analyzed by SEM/EDS and electron microprobe, and a subset of 33 of the glasses, representing a wide range of compositional types, was chosen for high-sensitivity INAA. A microdrilling device removed disks (mostly 50-100 micron diameter, weighing approx. 0.1-0.5 micro-g) for INAA. Preliminary data reported here are based only on short counts done within two weeks of irradiation.

Lindstrom, D. J.↗