Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “core optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Chalcogenide Glass Radiation Sensor; Materials Development, Design and Device Testing

For many decades, various radiation detecting material have been extensively researched, to find a better material or mechanism for radiation sensing. Recently, there is a growing need for a smaller and effective material or device that can perform similar functions of bulkier Geiger counters and other measurement options, which fail the requirement for easy, cheap and accurate radiation dose measurement. Here arises the use of thin film chalcogenide glass, which has unique properties of high thermal stability along with high sensitivity towards short wavelength radiation. The unique properties of chalcogenide glasses are attributed to the lone pair p-shell electrons, which provide some distinctive optical properties when compared to crystalline material. These qualities are derived from the energy band diagram and the presence of localized states in the band gap. Chalcogenide glasses have band tail states and localized states, along with the two band states. These extra states are primarily due to the lone pair electrons as well as the amorphous structure of the glasses. The localized states between the conductance band (CB) and valence band (VB) are primarily due to the presence of the lone pair electrons, while the band tail states are attributed to the Van der Waal's forces between layers of atoms. Localized states are trap locations within the band gap where electrons from the valence band can hop into, in their path towards the conduction band. Tail states on the other hand are locations near the band gap edges and are known as Urbach tail states (E u ). These states are occupied with many electrons that can participate in the various transformations due to interaction with photons. According to Y. Utsugi et. al., the electron-phonon interactions are responsible for the generation of the Urbach tails. These states are responsible for setting the absorption edge for these glasses and photons with energy near the band gap affect these states. We have studied the effect of x-rays and γ-rays, on thin film chalcogenide glasses and applied them in conjunction with film incorporating a silver source in a new type of radiation sensor for which we have an US patent application. In this report, we give data about our studies regarding our designed radiation sensor along with the testing and performance at various radiation doses. These studies have been preceded by materials characterization research related to the compositional and structural characteristics of the active materials used in the radiation sensor design. During the work on the project, we collected a large volume of material since every experiment was repeated many times to verify the results. We conducted a comprehensive material research, analysis and discussion with the aim to understand the nature of the occurring effects, design different structures to harness these effects, generated models to aid in the understanding the effects, built different device structures and collected data to quantify device performance. These various aspects of our investigation have been detailed in previous quarterly reports. In this report, we present our main results and emphasize on the results pertaining to the core project goals materials development, sensor design and testing and with an emphasis on classifying the appropriate material and design for the optimal application. The report has three main parts: (i) Presentation of the main data; (ii) Bulleted summary of the most important results; (iii) List of the patent, journal publications, conference proceedings and conferences participation, occurring as a result of working on the project.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

KIVA Software

KIVA is a family of Fortran-based Computational Fluid Dynamics (CFD) software that predicts complex multi-species multi-phase turbulent fuel and air flows. KIVA models all engine combustion processes with models for spray, soot formation, spark ignition, and reactive chemistry (including pollutantformation processes). Employing KIVA software helps to optimize internal combustion engine processes, including diesel engines, for higher efficiency and lower emissions. KIVA engine modeling routines such as spray and core CFD Arbitrary Lagrangian-Eulerian (ALE) algorithms are now ubiquitous in the industry of engine code simulators. In addition, many engineers and researchers have made modifications to or enhanced our routines to address specific problems in engine designs.

20 FOSSIL-FUELED POWER PLANTS↗

Thermomechanical Modeling of Hydride Materials for Tritium Storage Beds (FY18 Report)

Thermomechanical Modeling of Hydride Materials for Tritium Storage Beds This project aims to develop a fundamental modeling capability suitable for the simulation and assessment of various hydride materials and their associated storage vessels and deuterium/tritium delivery methods. If successful, this work will: • Enhance a core competency of SRNL by adding a unique capability to the tritium processing R&D efforts currently performed for NNSA Defense Programs • Optimize the design and operation of future hydrogen storage technologies in anticipation of increased demands and the call for a robust, reliable, resilient, and responsive stockpile • Establish SRNL as a valuable analytic resource for DOE and DoD decision makers and the foreign technology assessment community, which has already shown significant interest in developing such models to assess the likelihood and feasibility of alternative foreign gas (deuterium/tritium) storage and delivery systems that might provide new technical pathways for the U.S. and to determine the performance of alternative foreign systems.

36 MATERIALS SCIENCE↗

ReNew100: Reliable Power System Operation with 100% Renewable Generation

The ReNew100 project has developed and demonstrated an operator support system (OSS) to operate power systems with 100% renewable power generation from inverter-based resources (IBRs) like wind and solar that significantly reduces the risk of widespread power outages in a simulated operational environment at Technology Readiness Level (TRL) 6. The OSS achieves resilient operation for power systems under changing operation modes including varying combinations of conventional and renewable generation, including cases with 100% renewable generation from wind and solar IBRs. The OSS continuously monitors the N-1 security of the power system, which refers to the ability of the power systems to survive single outages of power system elements, like the loss of a generator or a power line, without causing widespread power outages beyond those expected and planned for. If the OSS identifies that the system is not N-1 secure, an automatic Controller Parameter Optimization (CoPO) developed within Renew100 is activated to optimize the N-1 security of the system by tuning controller parameters within different assets like batteries, wind, and solar plants. The core innovation of ReNew100 is the development of this CoPO as well as the demonstration of the OSS for a real-time simulation of the Hawai'i Island power system. Moreover, Renew100 has developed new model calibration techniques for dynamic power system models and demonstrated them for Hawai'i Island.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Nb3Sn cable development for the 11 T dipole demonstation model

Fermilab (FNAL) and CERN have started the development of 11 T 11-m long Nb{sub 3}Sn dipoles to replace a number of LHC NbTi dipoles and free space for cold collimators in the LHC DS areas. An important step in the design of these magnets is the development of the high aspect ratio Nb{sub 3}Sn cable to achieve the nominal field of 11 T at the nominal LHC operating current of 11.85 kA at 1.9 K with 20% margin. Keystoned cables with 40 and 41 strands with and without a stainless steel core were made out of hard Cu wires and Nb{sub 3}Sn RRP strand of 0.7 mm nominal diameter. The cable optimization process was aimed at achieving both mechanical stability and minimal damage to the delicate internal architecture of the Restacked-Rod-Process (RRP) Nb3Sn strands with 127 restack design to be used in the magnet short models. Each cable was characterized electrically for transport properties degradation at high field and for low field stability, and metallographically for internal damage.

43 PARTICLE ACCELERATORS↗

The HEPCloud Facility: elastic computing for High Energy Physics – The NOvA Use Case

The need for computing in the HEP community follows cycles of peaks and valleys mainly driven by conference dates, accelerator shutdown, holiday schedules, and other factors. Because of this, the classical method of provisioning these resources at providing facilities has drawbacks such as potential overprovisioning. As the appetite for computing increases, however, so does the need to maximize cost efficiency by developing a model for dynamically provisioning resources only when needed. To address this issue, the HEPCloud project was launched by the Fermilab Scientific Computing Division in June 2015. Its goal is to develop a facility that provides a common interface to a variety of resources, including local clusters, grids, high performance computers, and community and commercial Clouds. Initially targeted experiments include CMS and NOvA, as well as other Fermilab stakeholders. In its first phase, the project has demonstrated the use of the “elastic” provisioning model offered by commercial clouds, such as Amazon Web Services. In this model, resources are rented and provisioned automatically over the Internet upon request. In January 2016, the project demonstrated the ability to increase the total amount of global CMS resources by 58,000 cores from 150,000 cores - a 25 percent increase - in preparation for the Recontres de Moriond. In March 2016, the NOvA experiment has also demonstrated resource burst capabilities with an additional 7,300 cores, achieving a scale almost four times as large as the local allocated resources and utilizing the local AWS s3 storage to optimize data handling operations and costs. NOvA was using the same familiar services used for local computations, such as data handling and job submission, in preparation for the Neutrino 2016 conference. In both cases, the cost was contained by the use of the Amazon Spot Instance Market and the Decision Engine, a HEPCloud component that aims at minimizing cost and job interruption. This paper describes the Fermilab HEPCloud Facility and the challenges overcome for the CMS and NOvA communities.

Fuess, S.↗

Learning to Branch with Interpretable Machine Learning Models

Machine learning is being increasingly used in improving decisions made within branch-and-bound algorithms for solving mixed-integer programs (MIPs). Branching is a key component in branch-and-bound algorithms, this work presents IDAES-core project update on building simple and interpretable machine learning models for branching and improving decision-making tools applied for the optimization of advanced energy systems.

Bayramoglu, Selin↗

Mixed-precision iterative refinement using tensor cores on GPUs to accelerate solution of linear systems

Double-precision floating-point arithmetic (FP64) has been the de facto standard for engineering and scientific simulations for several decades. Problem complexity and the sheer volume of data coming from various instruments and sensors motivate researchers to mix and match various approaches to optimize compute resources, including different levels of floating-point precision. In recent years, machine learning has motivated hardware support for half-precision floating-point arithmetic. A primary challenge in high-performance computing is to leverage reduced-precision and mixed-precision hardware. We show how the FP16/FP32 Tensor Cores on NVIDIA GPUs can be exploited to accelerate the solution of linear systems of equations Ax = b without sacrificing numerical stability. The techniques we employ include multiprecision LU factorization, the preconditioned generalized minimal residual algorithm (GMRES), and scaling and auto-adaptive rounding to avoid overflow. We also show how to efficiently handle systems with multiple right-hand sides. On the NVIDIA Quadro GV100 (Volta) GPU, we achieve a 4×-5× performance increase and 5× better energy efficiency versus the standard FP64 implementation while maintaining an FP64 level of numerical stability.

GMRES↗

Provably optimal parallel transport sweeps on regular grids

We have found provably optimal algorithms for full-domain discrete-ordinate transport sweeps on regular grids in 3D Cartesian geometry. We describe these algorithms and sketch a 'proof that they always execute the full eight-octant sweep in the minimum possible number of stages for a given P{sub x} x P{sub y} x P{sub z} partitioning. Computational results demonstrate that our optimal scheduling algorithms execute sweeps in the minimum possible stage count. Observed parallel efficiencies agree well with our performance model. An older version of our PDT transport code achieves almost 80% parallel efficiency on 131,072 cores, on a weak-scaling problem with only one energy group, 80 directions, and 4096 cells/core. A newer version is less efficient at present-we are still improving its implementation - but achieves almost 60% parallel efficiency on 393,216 cores. These results conclusively demonstrate that sweeps can perform with high efficiency on core counts approaching 10{sup 6}. (authors)

97 MATHEMATICS AND COMPUTING↗

Surface Engineering of Electrospun Fibers to Optimize Ion and Electron Transport in Li + Battery Cathodes

This report documents research into the fabrication of Lithium Manganese Oxide (Spinel) (LMO) cathode material in the form of fibrous mats, the degradation process of this material in a battery electrolyte, the formation of core-shell coated fibers and the electrochemical properties of the active cathode core fiber. In practice, LMO experiences several degradation mechanisms ranging from capacity fading, the Jahn-Teller distortion phenomenon leading to dissolution in the electrolyte phase, and the formation of surface films by degradation of the electrolyte, and/or phase transitions at the surface to form Mn 2 O 3 . Density Functional Theory (DFT) was applied to model from first principles the interactions between the electrolyte and the surface leading to Mn ion dissolution. Thermodynamic values of solvation energy were calculated and related to the applied potential on the material during electrochemical cycling. Direct in situ observation of the degradation process was conducted on fiber structures using AFM and coin cell measurements, showing the rapid formation of theorized surface films. This provides the first direct evidence of processes occurring at the interface, such as dissolution of the active material, facet development, decomposition of the electrolyte to form a surface electrolyte interface (SEI) layer, or the formation of Li alcoxides/carboxylates. Methods for fabricating fiber structures of LMO were researched using two techniques; electrospinning and forcespinning. Chemical precursors were evaluated and optimized to lead to polycrystalline, hollow fibers of LMO, as well as tetragonal zirconia fiber mats. Sol-gel chemistries for the synthesis of LMO and zirconia have been implemented to generate these fiber morphologies. Core-shell methods were attempted using both techniques, proving partial success and insight into the physics of coherent core-shell fibers. The knowledge developed in this program has increased understanding of the degradation mechanisms of the active energy storage material, and aided development of a protective interface which resists these processes while permitting rapid Li + transport, good e - conductivity, a stable interface, and prevention of the formation of a solid-electrolyte interphase (SEI) layer.

25 ENERGY STORAGE↗

Size effect on electronic transport in nC–Si/SiO{sub x} core/shell quantum dots

Highlights: ► Electrical conductivity (σ) demonstrated to exhibit quantum size effect for Si-QDs. ► High σ ∼ 4 × 10{sup −2} S cm{sup −1} for Si-QDs of average size ∼3.7 nm, number density ∼4.8 × 10{sup 11} cm{sup −2}. ► Heterojunction-like band-structure at the QD interface controls electronic transport. -- Abstract: Electronic transport in silicon quantum dots (Si-QDs) in core/shell configuration was studied. The nC–Si cores encapsulated by protective SiO{sub x} shells embedded in a-Si matrix were obtained from one-step and spontaneous plasma processing, at low substrate temperature (300 °C) compatible for device fabrication. The size, density and distribution of nC–Si QDs were controlled by optimizing the plasma parameters. Very high electrical conductivity, σ ∼ 4 × 10{sup −2} S cm{sup −1}, was achieved at a total number density of Si-QDs, N ∼ 4.8 × 10{sup 11} cm{sup −2}, corresponding to the lowering in its average core size, d ∼ 3.7 nm, to the order of the bulk Si exciton Bohr radius and the associated quantum confinement effects. The electrical conductivity was demonstrated to exhibit quantum size (3 < d (nm) < 10) effect in zero dimensional quantum dots. The underlying electronic transport was explained using heteroquantum-dot model, the nC–SiO{sub x}:H QDs possess hetero-junction like band structure in the interface regions, due to their different band gaps.

36 MATERIALS SCIENCE↗

Optimized pulses for Raman excitation through the continuum: Verification using the multiconfigurational time-dependent Hartree-Fock method

Here, we have verified a mechanism for Raman excitation of atoms through continuum levels previously obtained by quantum optimal control using the multiconfigurational time-dependent Hartree-Fock (MCTDHF) method. For the optimal control, which requires running multiple propagations to determine the optimal pulse sequence, we used the computationally inexpensive time-dependent configuration interaction singles (TDCIS) method. TDCIS captures all of the necessary correlation of the desired processes but assumes that ionization pathways reached via double excitations are not present. MCTDHF includes these pathways and all multiparticle correlations in a set of time-dependent orbitals. The mechanism that was determined to be optimal in the Raman excitation of the Ne 1s 2 2s 2 2p 5 3p 1 valence state via the metastable 1s 2 2s 1 2p 6 3p 1 resonance state involves a sequential resonance-valence excitation. First, a long pump pulse excites the core-hole state, and then a shorter Stokes pulse transfers the population to the valence state. This process represents the first step in a multidimensional x-ray spectroscopy scheme that will provide a local probe of valence electronic correlations. Although at the optimal pulse intensities at the TDCIS level of theory the MCTDHF method predicts multiple ionization or excitation ionization of the atom, at slightly lower intensities (reduced by a factor of about 4) the TDCIS mechanism is shown to hold qualitatively. Quantitatively, the MCTDHF populations are reduced from the TDCIS calculations by a factor of 4.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Exploiting Geometric Partitioning in Task Mapping for Parallel Computes

We present a new method for mapping applications' MPI tasks to cores of a parallel computer such that applications' communication time is reduced. We address the case of sparse node allocation, where the nodes assigned to a job are not necessarily located in a contiguous block nor within close proximity to each other in the network, although our methods generalize to contiguous allocations as well. The goal is to assign tasks to cores so that interdependent tasks are performed by "nearby' cores, thus lowering the distance messages must travel, the amount of congestion in the network, and the overall cost of communication. Our new method applies a geometric partitioning algorithm to both the tasks and the processors, and assigns task parts to the corresponding processor parts. We also present a number of algorithmic optimizations that exploit specific features of the network or application. We show that, for the structured finite difference mini-application MiniGhost, our mapping methods reduced communication time up to 75% relative to MiniGhost's default mapping on 128K cores of a Cray XK7 with sparse allocation. For the atmospheric modeling code E3SM/HOMME, our methods reduced communication time up to 31% on 32K cores of an IBM BlueGene/Q with contiguous allocation.

97 MATHEMATICS AND COMPUTING↗

SymProp: Scaling Sparse Symmetric Tucker Decomposition via Symmetry Propagation

Sparse symmetric tensors are an important class of tensors, and their decompositions serve as powerful tools for revealing low-rank structures. This paper introduces SymProp, a novel approach for scaling sparse symmetric Tucker decomposition by propagating symmetry through intermediate computations. SymProp optimizes two key computational kernels: Sparse Symmetric Tensor Times Same Matrix chain (S3 TTMc) for Higher-Order Orthogonal Iteration (HOOI) and Sparse Symmetric Tensor Times Same Matrix chain Times Core (S3 TTMcTC) for Higher-Order QR Iteration (HOQRI). Our method employs a metaprogramming-based index iteration approach to efficiently handle the upper triangular parts of intermediate dense symmetric tensors. SymProp achieves up to 50.9× speedup over SPLATT and up to 360.8× over Compressed Sparse Symmetric (CSS) format on the S3 TTMc operation. Moreover, our S3 TTMc and S3 TTMcTC implementations support tensor orders four levels higher than state-of-the-art methods. Our HOQRI demonstrates superior scalability and up to a 33.6× speedup over optimized HOOI. By enabling more scalable Tucker decompositions for higher orders, decomposition ranks, and dimension sizes, SymProp opens new possibilities for analyzing complex hypergraph structures in fields such as network science, data mining, and machine learning.

Li, Zecheng [North Carolina State University]↗

Multispecies density peaking in gyrokinetic turbulence simulations of low collisionality Alcator C-Mod plasmas

Peaked density profiles in low-collisionality AUG and JET H-mode plasmas are probably caused by a turbulently driven particle pinch, and Alcator C-Mod experiments confirmed that collisionality is a critical parameter. Density peaking in reactors could produce a number of important effects, some beneficial, such as enhanced fusion power and transport of fuel ions from the edge to the core, while others are undesirable, such as lower beta limits, reduced radiation from the plasma edge, and consequently higher divertor heat loads. Fundamental understanding of the pinch will enable planning to optimize these impacts. We show that density peaking is predicted by nonlinear gyrokinetic turbulence simulations based on measured profile data from low collisionality H-mode plasma in Alcator C-Mod. Multiple ion species are included to determine whether hydrogenic density peaking has an isotope dependence or is influenced by typical levels of low-Z impurities, and whether impurity density peaking depends on the species. We find that the deuterium density profile is slightly more peaked than that of hydrogen, and that experimentally relevant levels of boron have no appreciable effect on hydrogenic density peaking. The ratio of density at r/a = 0.44 to that at r/a = 0.74 is 1.2 for the majority D and minority H ions (and for electrons), and increases with impurity Z: 1.1 for helium, 1.15 for boron, 1.3 for neon, 1.4 for argon, and 1.5 for molybdenum. The ion temperature profile is varied to match better the predicted heat flux with the experimental transport analysis, but the resulting factor of two change in heat transport has only a weak effect on the predicted density peaking.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Performance Refactoring of Instrumentation, Measurement, and Analysis Technologies for Petascale Computing. The PRIMA Project

The growing number of cores provided by today’s high-­end computing systems present substantial challenges to application developers in their pursuit of parallel efficiency. To find the most effective optimization strategy, application developers need insight into the runtime behavior of their code. The University of Oregon (UO) and the Juelich Supercomputing Centre of Forschungszentrum Juelich (FZJ) develop the performance analysis tools TAU and Scalasca, respectively, which allow high-­performance computing (HPC) users to collect and analyze relevant performance data – even at very large scales. TAU and Scalasca are considered among the most advanced parallel performance systems available, and are used extensively across HPC centers in the U.S., Germany, and around the world. The TAU and Scalasca groups share a heritage of parallel performance tool research and partnership throughout the past fifteen years. Indeed, the close interactions of the two groups resulted in a cross-­fertilization of tool ideas and technologies that pushed TAU and Scalasca to what they are today. It also produced two performance systems with an increasing degree of functional overlap. While each tool has its specific analysis focus, the tools were implementing measurement infrastructures that were substantially similar. Because each tool provides complementary performance analysis, sharing of measurement results is valuable to provide the user with more facets to understand performance behavior. However, each measurement system was producing performance data in different formats, requiring data interoperability tools to be created. A common measurement and instrumentation system was needed to more closely integrate TAU and Scalasca and to avoid the duplication of development and maintenance effort. The PRIMA (Performance Refactoring of Instrumentation, Measurement, and Analysis) project was proposed over three years ago as a joint international effort between UO and FZJ to accomplish these objectives: (1) refactor TAU and Scalasca performance system components for core code sharing and (2) integrate TAU and Scalasca functionality through data interfaces, formats, and utilities. As presented in this report, the project has completed these goals. In addition to shared technical advances, the groups have worked to engage with users through application performance engineering and tools training. In this regard, the project benefits from the close interactions the teams have with national laboratories in the United States and Germany. We have also sought to enhance our interactions through joint tutorials and outreach. UO has become a member of the Virtual Institute of High-­Productivity Supercomputing (VI-­HPS) established by the Helmholtz Association of German Research Centres as a center of excellence, focusing on HPC tools for diagnosing programming errors and optimizing performance. UO and FZJ have conducted several VI-­HPS training activities together within the past three years.

97 MATHEMATICS AND COMPUTING↗

Transformational Challenge Reactor – On the Application of Design for Additive Manufacturing (DfAM) Techniques to the Conception of Nuclear Core

Additive manufacturing (AM) technologies are radically changing the way objects are designed and manufactured. They allow building by deposition and solidification of material layer by layer, enabling the possibility to create simple and complex features alike, almost seamlessly. Generally, the design optimization process requires to define objectives, design variables and constraints. Additive manufacturing does not challenge this process per se but does allow designers to completely redefine the constraints space as the ones originating from fabrication can be considerably relaxed compared to more “traditional” manufacturing. Thus, design optimization becomes naturally far more responsive to the actual physics being solved and considerably less influenced by fabrication limitations, leading to dramatically different designs. To take advantage of these new opportunities, so-called Designing for Additive Manufacturing (DfAM) techniques are emerging. Development of design techniques specifically tailored for additive manufacturing is warranted because, considering AM, the design space is typically considerably larger than with traditional manufacturing. The ability to explore the design space efficiently is of paramount importance for designers. This study proposes to investigate and apply some of these DfAM techniques to the conception of nuclear core. The goal being to assess if these new methods can be applied to core design and if core design could benefits from additive manufacturing technologies. After a brief investigation on the pertinence of some DfAM techniques for core design, algorithms are proposed and a workflow is established to carry neutronics and steady-state thermal-hydraulics analyses. To diminish the work load, the workflow has been automated using python modules. These modules allow the rapid creation of input files, post-treatment of output files and visualization. To test the pertinence of the proposed workflow, three test cases have been investigated: a research and test reactor, a micro-reactor and a space propulsion reactor. These test cases offered a variety of objectives, constraints and operating conditions. It is observed that the proposed workflow is capable of converging quickly and efficiently to valid design solutions. It is then concluded that DfAM techniques can be applied to core design.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

The Science and Engineering of Durable Ultralow PGM Catalysts (2012 DOE-EERE-FCT Annual Progress Report)

Minimizing the quantity of Pt group metals used in polymer membrane fuel cells (PEMFCs) is one of the remaining grand challenges for fuel cell commercialization. Tremendous progress has been achieved over the last two decades in decreasing the Pt loading required for efficient fuel cell performance. Unfortunately, the fluctuations in the price of Pt represent a substantial barrier to the economics of widespread fuel cell use. Durability and impurity tolerance are also challenges that are tightly coupled to fuel cell Pt electrode loading. Traditional approaches to decreasing the amount of Pt required for good performance include: (1) Increasing mass activity by decreasing Pt particle size by supporting on carbon; (2) Alloy formulation Pt-Co, Pt-Cr alloys to improve mass activity; (3) Increasing Pt utilization by optimization of electronic and ionic contact of the Pt particles; (4) Improving conductivity of the electronic and ionic conducting constituents of the membrane electrode assembly; and (5) Improving reactant to and product mass transport away from the electroactive sites. Recent novel approaches include the nanoengineering of core shell catalysts and Pt particles of unusual geometries such as nanowires/whiskers. The success of the aforementioned approaches has been great; however further advances using such approaches have been hampered by a lack of underlining scientific understanding of the catalyst activity, particle growth mechanisms, and optimization strategies for designing composite electrodes The objectives of this report are: (1) Development of durable, high mass activity Platinum Group Metal (PGM) cathode catalysts-enabling lower cost fuel cells; (2) Elucidation of the fundamental relationships between PGM catalyst shape, particle size and activity to help design better catalysts; (3) Optimization of the cathode electrode layer to maximize the performance of PGM catalysts-improving fuel cell performance and lowering cost; (4) Understanding the performance degradation mechanisms of high mass activity cathode catalysts-provide insights to better catalyst design; and (5) Development and testing of fuel cells using ultra-low loading high activity PGM catalysts-validation of advanced concepts.

08 HYDROGEN↗