Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “consistent filtering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

A DEEP CHANDRA ACIS STUDY OF NGC 4151. III. THE LINE EMISSION AND SPECTRAL ANALYSIS OF THE IONIZATION CONE

This paper is the third in a series in which we present deep Chandra ACIS-S imaging spectroscopy of the Seyfert 1 galaxy NGC 4151, devoted to study its complex circumnuclear X-ray emission. Emission features in the soft X-ray spectrum of the bright extended emission (L{sub 0.3-2{sub keV}} {approx} 10{sup 40} erg s{sup -1}) at r > 130 pc (2'') are consistent with blended brighter O VII, O VIII, and Ne IX lines seen in the Chandra HETGS and XMM-Newton RGS spectra below 2 keV. We construct emission line images of these features and find good morphological correlations with the narrow-line region clouds mapped in [O III] {lambda}5007. Self-consistent photoionization models provide good descriptions of the spectra of the large-scale emission, as well as resolved structures, supporting the dominant role of nuclear photoionization, although displacement of optical and X-ray features implies a more complex medium. Collisionally ionized emission is estimated to be {approx}<12% of the extended emission. Presence of both low- and high-ionization spectral components and extended emission in the X-ray image perpendicular to the bicone indicates leakage of nuclear ionization, likely filtered through warm absorbers, instead of being blocked by a continuous obscuring torus. The ratios of [O III]/soft X-ray flux are approximately constant ({approx}15) for the 1.5 kpc radius spanned by these measurements, indicating similar relative contributions from the low- and high-ionization gas phases at different radial distances from the nucleus. If the [O III] and X-ray emission arise from a single photoionized medium, this further implies an outflow with a wind-like density profile. Using spatially resolved X-ray features, we estimate that the mass outflow rate in NGC 4151 is {approx}2 M{sub Sun} yr{sup -1} at 130 pc and the kinematic power of the ionized outflow is 1.7 Multiplication-Sign 10{sup 41} erg s{sup -1}, approximately 0.3% of the bolometric luminosity of the active nucleus in NGC 4151.

79 ASTRONOMY AND ASTROPHYSICS↗

The distances to open clusters from main-sequence fitting. V. Extension of color calibration and test using cool and metal-rich stars in NGC 6791

We extend our effort to calibrate stellar isochrones in the Johnson–Cousins (BVI{sub C}) and the 2MASS (JHK{sub s}) filter systems based on observations of well-studied open clusters. Using cool main-sequence (MS) stars in Praesepe, we define empirical corrections to the Lejeune et al. color–effective temperature (T{sub eff}) relations down to T{sub eff}∼3600 K, complementing our previous work based on the Hyades and the Pleiades. We apply empirically corrected isochrones to existing optical and near-infrared photometry of cool (T{sub eff}≲5500 K) and metal-rich ([Fe/H]= +0.37) MS stars in NGC 6791. The current methodology relies on an assumption that color–T{sub eff} corrections are independent of metallicity, but we find that estimates of color excess and distance from color–magnitude diagrams with different color indices converge on each other at the precisely known metallicity of the cluster. Along with a satisfactory agreement with eclipsing binary data in the cluster, we view the improved internal consistency as a validation of our calibrated isochrones at super-solar metallicities. For very cool stars (T{sub eff}≲4800 K), however, we find that B − V colors of our models are systematically redder than the cluster photometry by ∼0.02 mag. We use color–T{sub eff} transformations from the infrared flux method and alternative photometry to examine a potential color-scale error in the input cluster photometry. After excluding B − V photometry of these cool MS stars, we derive E(B − V)=0.105±0.014, [M/H] = +0.42±0.07, (m − M){sub 0}=13.04±0.08, and the age of 9.5 ± 0.3 Gyr for NGC 6791.

79 ASTRONOMY AND ASTROPHYSICS↗

Planck 2013 results. XIX. The integrated Sachs-Wolfe effect

Based on cosmic microwave background (CMB) maps from the 2013 Planck Mission data release, this paper presents the detection of the integrated Sachs-Wolfe (ISW) effect, that is, the correlation between the CMB and large-scale evolving gravitational potentials. The significance of detection ranges from 2 to 4σ, depending on which method is used. We investigated three separate approaches, which essentially cover all previous studies, and also break new ground. (i) We correlated the CMB with the Planck reconstructed gravitational lensing potential (for the first time). This detection was made using the lensing-induced bispectrum between the low-&ell; and high-&ell; temperature anisotropies; the correlation between lensing and the ISW effect has a significance close to 2.5σ. (ii) We cross-correlated with tracers of large-scale structure, which yielded a significance of about 3σ, based on a combination of radio (NVSS) and optical (SDSS) data. (iii) We used aperture photometry on stacked CMB fields at the locations of known large-scale structures, which yielded and confirms a 4σ signal, over a broader spectral range, when using a previously explored catalogue, but shows strong discrepancies in amplitude and scale when compared with expectations. More recent catalogues give more moderate results that range from negligible to 2.5σ at most, but have a more consistent scale and amplitude, the latter being still slightly higher than what is expected from numerical simulations within ΛCMD. Where they can be compared, these measurements are compatible with previous work using data from WMAP, where these scales have been mapped to the limits of cosmic variance. Planck's broader frequency coverage allows for better foreground cleaning and confirms that the signal is achromatic, which makes it preferable for ISW detection. As a final step we used tracers of large-scale structure to filter the CMB data, from which we present maps of the ISW temperature perturbation. Lastly, these results provide complementary and independent evidence for the existence of a dark energy component that governs the currently accelerated expansion of the Universe.

79 ASTRONOMY AND ASTROPHYSICS↗

LARGE PARTICLES IN ACTIVE ASTEROID P/2010 A2

The previously unknown asteroid P/2010 A2 rose to prominence in 2010 by forming a transient, comet-like tail consisting of ejected dust. The observed dust production was interpreted as the result of either a hypervelocity impact with a smaller body or a rotational disruption. We have re-observed this object, finding that large particles remain a full orbital period after the initial outburst. In the intervening years, particles smaller than {approx}3 mm in radius have been dispersed by radiation pressure, leaving only larger particles in the trail. Since the total mass is dominated by the largest particles, the radiation pressure filtering allows us to obtain a more reliable estimate of the debris mass than was previously possible. We find that the mass contained in the debris is {approx}5 Multiplication-Sign 10{sup 8} kg (assumed density 3000 kg m{sup -3}), the ratio of the total debris mass to the nucleus mass is {approx}0.1, and that events like P/2010 A2 contribute <3% to the Zodiacal dust production rate. Physical properties of the nucleus and debris are also determined.

79 ASTRONOMY AND ASTROPHYSICS↗

Dark and bright modes, and their coherent control in dipolar metasurface bilayers

Several plasmonic nanoparticles supporting dipolar resonances can couple to form normal modes. Here, we develop an analytical model to explain the formation of nonradiative “dark” and radiative “bright” modes through radiative coupling in bilayers consisting of dipolar nanoantenna arrays that are separated by a subwavelength distance. We also include near-field contributions in our model and show that the absorption and reflectance spectra obtained from our model agree reasonably well with the respective finite-difference time-domain simulation results for both perfectly aligned and misaligned bilayers. Here, the ability to vary the reflection and absorption spectra of these bilayers by changing the material and geometrical parameters has potential applications in the design of efficient spectral filters. We also show that we can selectively excite these modes by adjusting the phase between two counterpropagating normally incident fields, which has applications in all-optical modulators and switches based on purely linear interferometric effects.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

SU-F-T-502: FFF Beams, Jaw-Tracking and Treatment Techniques: Out of Field Dose Considerations for Pediatric Radiation Therapy Delivery

Purpose: To compare the extended dose profile delivered by 3DCRT and VMAT techniques for flattened and flattening-filter-free(FFF) photon beams (6X, 6XFFF,10XFFF), with and without jaw-tracking (JT) on Varian TrueBeam linac. The goal is to determine which treatment technique/modality will minimize the peripheral photon dose exposure (and ultimately minimize the risk of second malignant neoplasms (SMN)) in pediatric patients. Methods: 3DCRT, VMAT, and jaw tracking VMAT (JTVMAT) plans with 6X, 6XFFF and 10XFFF x-ray beams were created on a 30×60×22.5cm solid water phantom with a 551 cc PTV. The 3DCRT plans consisted of a 4FLD arrangement. The optimization objectives for the single-arc VMAT plans was V95%Rx=98% to PTV and minimize dose to a 5cm diameter organ at risk (OAR). The OAR to PTV distance varied from 0–30cm along the long axis at 7.5cm depth. The dose to the center of the OAR was measured using a 0.6cc ion chamber. Results: Relative to the 6X flattened beam, the 10XFFF photon beam had the lowest dose in the penumbra and peripheral region (>15 cm) region by up to 20% and 40%, respectively for all modalities (3DCRT, VMAT, JTVMAT). The 6XFFF beams only showed a dose reduction in the peripheral region (by up to 20%). JT did not significantly affect the peripheral dose for all modalities and energies. Conclusion: Treating pediatric patients with a 10XFFF beam is the most effective way to reduce photon scatter dose in both the penumbra and peripheral regions. However, the neutron dose contribution resulting from the 10MV beam still needs to be considered. For all modalities, 6XFFF was the next effective method to reduce peripheral photon doses. 3DCRT beams had the lowest peripheral doses for all energies compared to VMAT and JTVMAT, however previous publications have shown that this comes at the expense of PTV conformity and OAR sparing.

60 APPLIED LIFE SCIENCES↗

Exploring the determinants of organic matter bioavailability through substrate-explicit thermodynamic modeling

Microbial decomposition of organic matter (OM) in river corridors is a major driver of nutrient and energy cycles in natural ecosystems. Recent advances in omics technologies enabled high-throughput generation of molecular data that could be used to inform biogeochemical models. With ultrahigh-resolution OM data becoming more readily available, in particular, the substrate-explicit thermodynamic modeling (SXTM) has emerged as a promising approach due to its ability to predict OM degradation and respiration rates from chemical formulae of compounds. This model implicitly assumes that all detected organic compounds are bioavailable, and that aerobic respiration is driven solely by thermodynamics. Despite promising demonstrations in previous studies, these assumptions may not be universally valid because OM degradation is a complex process governed by multiple factors. To identify key drivers of OM respiration, we performed a comprehensive analysis of diverse river systems using Fourier-transform ion cyclotron resonance mass spectrometry OM data and associated respiration measurements collected by the Worldwide Hydrobiogeochemistry Observation Network for Dynamic River Systems (WHONDRS) consortium. In support of our argument, we found that the incorporation of all compounds detected in the samples into the SXTM resulted in a poor correlation between the predicted and measured respiration rates. The data-model consistency was significantly improved by the selective use of a small subset (i.e., only about 5%) of organic compounds identified using an optimization method. Through a subsequent comparative analysis of the subset of compounds (which we presume as bioavailable) against the full set of compounds, we identified three major traits that potentially determine OM bioavailability, including: (1) thermodynamic favorability of aerobic respiration, (2) the number of C atoms contained in compounds, and (2) carbon/nitrogen (C/N) ratio. We found that all three factors serve as “filters” in that the compounds with undesirable properties in any of these traits are strictly excluded from the bioavailable fraction. This work highlights the importance of accounting for the complex interplay among multiple key traits to increase the predictive power of biogeochemical and ecosystem models.

59 BASIC BIOLOGICAL SCIENCES↗

Extending I/O through High Performance Data Services

The complexity of HPC systems has increased the burden on the developer as applications scale to hundreds of thousands of processing cores. Moreover, additional efforts are required to achieve acceptable I/O performance, where it is important how I/O is performed, which resources are used, and where I/O functionality is deployed. Specifically, by scheduling I/O data movement and by effectively placing operators affecting data volumes or information about the data, tremendous gains can be achieved both in the performance of simulation output and in the usability of output data. Previous studies have shown the value of using asynchronous I/O, of employing a staging area, and of performing select operations on data before it is written to disk. Leveraging such insights, this paper develops and experiments with higher level I/O abstractions, termed 'data services', that manage output data from 'source to sink': where/when it is captured, transported towards storage, and filtered or manipulated by service functions to improve its information content. Useful services include data reduction, data indexing, and those that manage how I/O is performed, i.e., the control aspects of data movement. Our data services implementation distinguishes control aspects - the control plane - from data movement - the data plane, so that both may be changed separably. This results in runtime flexibility not only in which services to employ, but also in where to deploy them and how they use I/O resources. The outcome is consistently high levels of I/O performance at large scale, without requiring application change.

97 MATHEMATICS AND COMPUTING↗

Synthesis of TiO{sub 2} by electrochemical method from TiCl{sub 4} solution as anode material for lithium-ion batteries

Metal oxide combined with graphite becomes interesting composition. TiO{sub 2} is a good candidate for Li ion battery anode because of cost, availability of sufficient materials, and environmentally friendly. TiO{sub 2} gravimetric capacity varied within a fairly wide range. TiO{sub 2} crystals form highly depends on the synthesis method used. The electrochemical method is beginning to emerge as a valuable option for preparing TiO{sub 2} powders. Using the electrochemical method, the particle can easily be controlled by simply adjusting the imposed current or potential to the system. In this work, the effects of some key parameters of the electrosynthesis on the formation of TiO{sub 2} have been investigated. The combination of graphite and TiO{sub 2} particle has also been studied for lithium-ion batteries. The homogeneous solution for the electrosynthesis of TiO{sub 2} powders was TiCl{sub 4} in ethanol solution. The electrolysis was carried out in an electrochemical cell consisting of two carbon electrodes with dimensions of (5 × 2) cm. The electrodes were set parallel with a distance of 2.6 cm between the electrodes and immersed in the electrolytic solution at a depth of 2 cm. The electrodes were connected to the positive and negative terminals of a DC power supply. The electrosynthesis was performed galvanostatically at 0.5 to 2.5 hours and voltages were varied from 8 to 12 V under constant stirring at room temperature. The resulted suspension was aged at 48 hrs, filtered, dried directly in an oven at 150°C for 2 hrs, washed 2 times, and dried again 60 °C for 6 hrs. The particle product has been used to lithium-ion battery as anode. Synthesis of TiO{sub 2} particle by electrochemical method at 10 V for 1 to 2.5 hrs resulted anatase and rutile phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

SPATIAL AND TEMPORAL DISTRIBUTIONS OF TRANSIENT HORIZONTAL MAGNETIC FIELDS WITH DEEP EXPOSURE

We obtained a long-exposure vector magnetogram of the quiet Sun photosphere at the disk center with a wide field of view of 51'' x 82''. The observation was performed at Fe I 525.0 nm with the shutterless mode of the Narrow Band Filter Imager of the Solar Optical Telescope (SOT) on board the Hinode satellite. We summed the linear polarization (LP) maps taken with a time cadence of 60 s for 2 hr to obtain a map with as long of an exposure as possible. The polarization sensitivity would be more than 4.6 (21.2 in exposure time) times the standard observation with the SOT Spectropolarimeter. The LP map shows a cellular structure with a typical scale of 5''-10''. We find that the enhanced LP signals essentially consist of the isolated sporadic transient horizontal magnetic fields (THMFs) with a lifetime of 1-10 minutes and are not contributed by long-duration weak horizontal magnetic fields. The cellular structure coincides in position with the negative divergence of the horizontal flow field, i.e., mesogranular boundaries with downflows. Azimuth distribution appears to be random for the scale size of the mesogranules. Some pixels have two separate appearances of THMFs, and the measured time intervals are consistent with the random appearance. THMFs tend to appear at the mesogranular boundaries, but appear randomly in time. We discuss the origin of THMFs based on these observations.

79 ASTRONOMY AND ASTROPHYSICS↗

Installation of a solid state neutral particle analyzer array on mega ampere spherical tokamak upgrade

A compact solid state neutral particle analyzer (SSNPA) diagnostic, previously installed at NSTX-U, has been moved to MAST-U and successfully operated in the first physics campaign (MU01). The SSNPA operates by detecting the flux of fast neutral particles produced by charge exchange (CX) reactions to diagnose the fast ion distribution. The diagnostic consists of three 16-channel sensors, which provide a radial view of the plasma and have a sightline intersection with the South–South neutral beam line. From this radial geometry, active CX signals from mostly trapped particles are observed. Each channel has a spatial resolution of 3–4 cm, a temporal resolution of 200 kHz, and an average pitch angle resolution of a few degrees. The three-sensor configuration allows for coarse energy resolution of the CX signals; each sensor sees similar sightlines but different filter thicknesses alter the energy cutoffs by known amounts. Experimental data show that all channels are collecting data as intended. The signal to noise ratio is typically around 15. Preliminary data analysis shows a correlation between the SSNPA signal and magnetohydrodynamic activity in the plasma as expected.

Instruments & Instrumentation↗

Improved microscopic-macroscopic approach incorporating the effects of continuum states

The Woods-Saxon-Strutinsky method (the microscopic-macroscopic method) combined with the Kruppa prescription for positive-energy levels, which is necessary to treat neutron-rich nuclei, is studied to clarify the reason for its success and to propose improvements for its shortcomings. The reason why the plateau condition is met for the Nilsson model but not for the Woods-Saxon model is understood in a new interpretation of the Strutinsky smoothing procedure as a low-pass filter. Essential features of the Kruppa level density is extracted in terms of the Thomas-Fermi approximation modified to describe spectra obtained from diagonalization in truncated oscillator bases. A method is proposed, which weakens the dependence on the smoothing width by applying the Strutinsky smoothing only to the deviations from a reference level density. The BCS equations are modified for the Kruppa spectrum, which is necessary to treat the pairing correlation properly in the presence of a continuum. The potential depth is adjusted for the consistency between the microscopic and macroscopic Fermi energies. It is shown, with these improvements, that the microscopic-macroscopic method is now capable to reliably calculate binding energies of nuclei far from stability.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Collaborative project. Ocean-atmosphere interaction from meso-to planetary-scale. Mechanisms, parameterization, and variability

This project aims to improve long term global climate simulations by resolving ocean mesoscale activity and the corresponding response in the atmosphere. The main computational objectives are; i) to perform and assess Community Earth System Model (CESM) simulations with the new Community Atmospheric Model (CAM) spectral element dynamical core; ii) use static mesh refinement to focus on oceanic fronts; iii) develop a new Earth System Modeling tool to investigate the atmospheric response to fronts by selectively filtering surface flux fields in the CESM coupler. The climate research objectives are 1) to improve the coupling of ocean fronts and the atmospheric boundary layer via investigations of dependency on model resolution and stability functions: 2) to understand and simulate the ensuing tropospheric response that has recently been documented in observations: and 3) to investigate the relationship of ocean frontal variability to low frequency climate variability and the accompanying storm tracks and extremes in high resolution simulations. This is a collaborative multi-institution project consisting of computational scientists, climate scientists and climate model developers. It specifically aims at DOE objectives of advancing simulation and predictive capability of climate models through improvements in resolution and physical process representation.

54 ENVIRONMENTAL SCIENCES↗

Effect of Temperature and pH on Microbial Communities Fermenting a Dairy Coproduct Mixture

Organic-rich industrial residues can serve as renewable feedstocks for the generation of useful products by microbial fermentation. We investigated fermenting communities enriched in a mixture of ultra-filtered milk permeate (UFMP) and acid whey from cottage cheese (CAW), two dairy coproducts rich in lactose. To evaluate how operational pH and temperature affect microbial communities and fermentation products, we operated 12 bioreactors for 140 days, each fed a 1:1 mixture of UFMP and CAW at either 35 °C or 50 °C and at either a pH of 4.8 or 5.5. The bioreactors operated at a pH of 4.8 resulted in the incomplete conversion of lactose, while those operated at a pH of 5.5 consistently fermented lactose, primarily into lactic, acetic, and hexanoic acids. The metagenomic analyses revealed that microbial communities obtained at a pH of 5.5 were dominated by lactic acid-producing organisms. Additionally, an inverse relationship was found between the abundance of chain elongating organisms and lactic acid accumulation, with 50 °C reducing the abundance of these organisms and enhancing lactic acid yields. We conclude that the pH and temperature are important determinants of the fermentation of dairy coproducts with a pH of 5.5 and 50 °C yielding the most promising results for lactic acid production. Additional research is required to better understand the factors affecting functional consistency of the process.

Biotechnology & Applied Microbiology↗

Superheterodyne configuration for two-wavelength interferometry applied to absolute distance measurement

We present a new superheterodyne technique for long-distance measurements by two-wavelength interferometry (TWI). While conventional systems use two acousto-optic modulators to generate two different heterodyne frequencies, here the two frequencies result from synchronized sweeps of optical and radio frequencies. A distributed feedback laser source is injected in an intensity modulator that is driven at the half-wave voltage mode. A radio-frequency signal is applied to this intensity modulator to generate two optical sidebands around the optical carrier. This applied radio frequency consists of a digital ramp between 13 and 15 GHz, with 1 ms duration and with an accuracy of better than 1 ppm. Simultaneously, the laser source is frequency modulated by a current modulation that is synchronized on the radio-frequency ramp as well as on a triangle waveform. These two frequency-swept optical signals at the output of the modulator illuminate a Michelson interferometer and create two distinct distance-dependent heterodyne frequencies on the photodetector. The superheterodyne signal is then detected and bandpass filtered to retrieve the absolute distance measurement. Experiments between 1 and 15 m confirm the validity of this new concept, leading to a distance accuracy of {+-} 50 {mu}m for a 1 ms acquisition time.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Fish scale deformation analysis using scanning electron microscope: New potential biomarker in aquatic environmental monitoring of aluminum and iron contamination

Fish scale has the potential to be a rapid biomarker due to its structure and high possibility to come into contact with any pollutant in the aquatic environment. The scale structure consists of osteoblastic cells and other bone materials such as collagen where it is possible to form a molecular complex with heavy metals such as aluminum and iron. Hence, aluminum and iron in water could possibly destroy the scale material and marked as a scale deformation that quantitatively could be analyzed by comparing it to the normal scale structure. Water sampling and fish cage experiment were performed between June and July 2011 in Porong river which represented the water body that has high aluminum and iron contamination. The filtered water samples were preserved and extracted using the acid-mixture procedure prior to measurement of the aluminum and iron concentrations using Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES), while samples for total suspended solid (TSS) analysis were kept at 4 °C in cool-boxes. The scales were cleaned with sterile water, then dehydrated in 30, 50, 70, and 90% ethanol and dried on filter papers. They were then mounted on an aluminum stub and coated with gold in a sputter coater prior to Scanning Electron Microscope (SEM) observation. According to the SEM analysis, it was found that there were several deformations on the scale samples taken from sites that have high concentrations of aluminum and iron i.e. the increasing number of pits, deformation and decreasing number of spherules and ridges while the control scale exhibited the normal features. However, the site with higher TSS and pH indicated lower aluminum effect. A moderate correlation was found between the number of pits with aluminum (r=0.43) and iron (r=0.41) concentrations. Fish scale deformation using SEM analysis can potentially be a rapid biomarker in aquatic monitoring of aluminum and iron contamination. However, the measurement must be accompanied by pH and TSS observations.

36 MATERIALS SCIENCE↗

THE LONG-TERM DECAY IN PRODUCTION RATES FOLLOWING THE EXTREME OUTBURST OF COMET 17P/HOLMES

Numerous sets of narrowband filter photometry were obtained of Comet 17P/Holmes from Lowell Observatory during the interval of 2007 November 1 to 2008 March 5. Observations began 8 days following its extreme outburst, at which time the derived water production rate, based on OH measurements, was 5 x 10{sup 29} molecule s{sup -1} and the derived proxy of dust production, A({theta})f{rho}, was about 5 x 10{sup 5} cm. Relative production rates for the other gas species, CN, C{sub 2}, C{sub 3}, and NH, are consistent with 'typical' composition (based on our update to the classifications by A'Hearn et al.). An exponential decay in the logarithm of measured production rates as a function of time was observed for all species, with each species dropping by factors of about 200-500 after 125 days. All gas species exhibited clear trends with aperture size, and these trends are consistent with larger apertures having a greater proportion of older material that was released when production rates were higher. Much larger aperture trends were measured for the dust, most likely because the dust grains have smaller outflow velocities and longer lifetimes than the gas species; therefore, a greater proportion of older, i.e., higher production dust is contained within a given aperture. By extrapolating to a sufficiently small aperture size, we derive near-instantaneous water and dust production rates throughout the interval of observation, and also estimate values immediately following the outburst. The finite lifetime of the gas species requires that much higher ice vaporization rates were taking place throughout the observation interval than occurred prior to the outburst, likely due to the continued release of icy grains from the nucleus. The relatively small aperture trends for the gas species also imply that the bulk of fresh, excess volatiles are confined to the nucleus and near-nucleus regime, rather than being associated with the outburst ejecta cloud. A minimum of about 0.1% of the total nucleus volume was vaporized water ice, while a dust volume corresponding to at least 1%-2% was likely to have been released from the nucleus.

79 ASTRONOMY AND ASTROPHYSICS↗

THE PHOTOMETRIC PROPERTIES OF A VAST STELLAR SUBSTRUCTURE IN THE OUTSKIRTS OF M33

We have surveyed approximately 40 deg{sup 2} surrounding M33 with Canada-France-Hawaii Telescope MegaCam/MegaPrime in the g and i filters out to a maximum projected radius from this galaxy of 50 kpc, as part of the Pan-Andromeda Archaeological Survey (PAndAS). Our observations are deep enough to resolve the top {approx}4 mag of the red giant branch population in this galaxy. We have previously shown that the disk of M33 is surrounded by a large, irregular, low surface brightness substructure. Here, we quantify the stellar populations and structure of this feature using the PAndAS data. We show that the stellar populations of this feature are consistent with an old population with ([Fe/H]) {approx} -1.6 dex and an interquartile range in metallicity of {approx}0.5 dex. We construct a surface brightness map of M33 that traces this feature to {mu}{sub V} {approx_equal} 33 mag arcsec{sup -2}. At these low surface brightness levels, the structure extends to projected radii of {approx}40 kpc from the center of M33 in both the northwest and southeast quadrants of the galaxy. Overall, the structure has an 'S-shaped' appearance that broadly aligns with the orientation of the H I disk warp. We calculate a lower limit to the integrated luminosity of the structure of -12.7 {+-} 0.5 mag, comparable to a bright dwarf galaxy such as Fornax or Andromeda II and slightly less than 1% of the total luminosity of M33. Further, we show that there is tentative evidence for a distortion in the distribution of young stars near the edge of the H I disk that occurs at similar azimuth to the warp in H I. The data also hint at a low-level, extended stellar component at larger radius that may be an M33 halo component. We revisit studies of M33 and its stellar populations in light of these new results and discuss possible formation scenarios for the vast stellar structure. Our favored model is that of the tidal disruption of M33 in its orbit around M31.

79 ASTRONOMY AND ASTROPHYSICS↗