Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “coaxial”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

DSN research and technology support

The activities of the Venus Station (DSS 13) and the Microwave Test Facility (MTF) during the period April 19 through June 13, 1976, are discussed and progress noted. Continuing reliability testing and computer program refinement of the remote controlled, unattended automated pulsar observing station is noted, along with routine observations of 17 pulsars. Radar observations of a geostationary satellite are reported, along with the routine automatic testing of the stability of the DSS 13 maser-receiving system. Additional testing of thermal characteristics of semiflexible coaxial cables is reported, along with phase stabilization measurements thereon. Routine support of the planetary radio astronomy experiment, with 43.25 hours of observations of Jupiter and various radio calibration sources, is reported, along with 18.75 hours of differential VLBI observations in conjunction with Australia, DSS 43. Modifications of the clock synchronization winterization system are reported, along with a discussion of the activities of the DSN High-Power Transmitter Maintenance Facility.

Jackson, E. B.↗
NASA NTRS1975

New two-stage accelerator for hypervelocity impact simulation

The present knowledge of the micrometeoroid environment and the simulation requirements for laboratory devices show that the simulated mass-velocity range must be extended to higher values in both mass and velocity. This is accomplished with the new two-stage accelerator, which consists of a light gas gun as the first stage and a coaxial accelerator with a compressor coil as the second stage. The operation of the new device is described together with a theoretical investigation of the timing of the first and the second stage, which leads to an appropriate adjustment of the two stages. The theoretical and experimental results agree well and show that 600-micron diameter glass beads have been accelerated to velocities near 20 km/sec.

Igenbergs, E. B.↗
NASA NTRS1976

Lip noise generated by flow separation from nozzle surfaces

Flow separation from nozzle surfaces can be a source of significant noise in addition to the jet noise. When no flow separation region exists only jet noise is observed at every angle, for velocities down to 120 m/sec, with both low and high levels of initial turbulence. Intense nearly periodic turbulence and noise is caused by flow separation from the thin core nozzle lip of a coaxial nozzle. This can be described by a combination of aeolian tone and trailing edge noise theory. Noise caused by flow separation from the surfaces of other nozzle geometries has somewhat different characteristics.

Olsen, W.↗
NASA NTRS1976

Reduction of losses in low-frequency /2 MHz/ surface-wave delay line by outgassing

Surface waves are attenuated by a fluid or gas surrounding the surface of propagation, an effect caused by frictional losses determined by the fluid or gas viscosity and by the emission of compression waves into the environment. The paper reports a large reversible reduction in attenuation of surface waves at frequencies as low as 2 MHz by outgassing treatments of some materials, suggesting that at such frequencies vacuum encapsulation is a desirable procedure. Outgassing experiments were performed on a delay line constructed from high-density p.z.t.-8 (lead-zirconate-titanate). The delay line configuration was a slab waxed onto a metal base with coaxial connectors mounted near and connected by gold-wire leads to the interdigital finger sets. Output signal enhancements by as much as 8 dB were achieved after overnight evacuation at 10 to the -2 torr at room temperature.

Tittmann, B. R.↗
NASA NTRS1976

Some effects of combustion on turbulent mixing

Ceramic-heated tunnel experiments were performed to study mixing and combustion of near-sonic central hydrogen jets and coaxial supersonic air or nitrogen streams. Results of concentration measurements in these flows are presented. Larger concentrations of hydrogen were observed near the axis in the presence of combustion. Results of flowfield calculations and of low-speed free jet experiments reported by Chigier and Strokin (1974) suggest that this behavior is caused primarily by lower density in the burning case producing lower turbulent mass transport coefficients.

Bangert, L. H.↗
NASA NTRS1975

Analysis and testing of two-dimensional slot nozzle ejectors with variable area mixing sections

Finite difference computer techniques have been used to calculate the detailed performance of air-to-air two-dimensional ejectors with symmetric variable area mixing sections and coaxial converging primary nozzles. The analysis of the primary nozzle assumed correct expansion of the flow and is suitable for subsonic and slightly supersonic velocity levels. The variation of the mixing section channel walls is assumed to be gradual so that the static pressure can be assumed uniform on planes perpendicular to the axis. A test program was run to provide two-dimensional ejector test data for verification of the computer analysis. A primary converging nozzle with a discharge geometry of 3.18 mm x 203 mm was supplied with 0.340 kg/sec of air at about 2.43 bar and 356 K. This nozzle was combined with two mixing section geometries with throat sizes of 31.8 mm x 203 mm and 47.6 mm x 203 mm and was tested at a total of 11 operating points.

Gilbert, G. B.↗
NASA NTRS1976

Vortex shedding from a blunt trailing edge with equal and unequal external mean velocities

A flow-visualization study has shown that strong Karman vortices develop behind the blunt trailing edge of a plate when the free-stream velocities over both surfaces are equal and that the vortices tend to disappear when the surface velocities are unequal. This observation provides an explanation for the occurence and disappearance of certain discrete tones often found to be present in the noise spectra of coaxial jets. Both the vortex formation and the tones occur at a Strouhal number based on the lip thickness and the average of the external steady-state velocities of about 0.2. Results from theoretical calculations of the vortex formation, based on an inviscid incompressible analysis of the motion of point vortices, were in good agreement with the experimental observations.

Boldman, D. R.↗
NASA NTRS1975

Comments on unmixedness

Unmixedness in flames refers to the condition in which eddies of fuel and oxidant have engulfed each other but where the molecular mixing necessary for complete reaction has not taken place. This phenomenon is studied experimentally using a flow geometry consisting of a coaxial Mach 2 hydrogen jet surrounded by a parallel cold Mach 2 air stream. Gas sample measurements taken downstream in the region near the flame revealed the presence of unreacted hydrogen and oxygen in the same sample. The data were analyzed by means of the CHARNAL program which uses a step function variation with time for instantaneous concentration.

Eggers, J. M.↗
NASA NTRS1976

Measurements of acoustic responses of gaseous propellant injectors

Results are presented for an investigation intended to provide experimental data that can quantitatively describe the way in which various coaxial injector designs affect the stability of gaseous propellant rocket motors. The response factors of configurations that simulate the flow conditions in a gaseous-fuel injector element and a gaseous-oxidizer injector element are measured by using a modified impedance-tube technique and under cold-flow conditions simulating those observed in rocket motors with axial instability. The measured injector response factor data are presented and discussed. It is shown that there is reasonable agreement between the measured injector response factors and those predicted by the Feiler and Heidmann model (1967), and that the orifice length can be varied to shift the resonant frequency of the injector without any change in the magnitude of the response factor at resonance. A change in the injector open-area ratio is found to have a significant effect on the characteristics of the injector response factor.

Janardan, B. A.↗
NASA NTRS1977

Twisted shield-pair transmission line

Lightweight cable forms balanced transmission line and replaces costlier coaxial cables for multiplex-signal transmission. Cable is fabricated with carefully-controlled electrical characteristics and functions without tuning networks at frequencies up to 10 MHz.

Lind, W. N.↗
NASA NTRS1976

Reel safety brake

A braking apparatus is described for a tape transport device having two stacked coaxial reels and feelers mounted in proximity to the reels for sensing the tape being wound on each reel. A device is mounted in proximity to adjacent central hubs of the reels to a simultaneously, frictionally engage both hubs and brake both reels. A mechanical actuator is coupled to both feelers and to the brake device. The brake means comprises a pair of rubber shoulders that extend in opposite directions relative to a common axis, and turns about the axis in response to either of the feelers.

Carle, C. E.↗
NASA NTRS1977

An experimental study of reactive turbulent mixing

An experimental study of two coaxial gas streams, which react very rapidly, was performed to investigate the mixing characteristics of turbulent flow fields. The center stream consisted of a CO-N2 mixture and the outer annular stream consisted of air vitiated by H2 combustion. The streams were at equal velocity (50 m/sec) and temperature (1280 K). Turbulence measurements were obtained using hot film anemometry. A sampling probe was used to obtain time averaged gas compositions. Six different turbulence generators were placed in the annular passage to alter the flow field mixing characteristics. The turbulence generators affected the bulk mixing of the streams and the extent of CO conversion to different degrees. The effects can be related to the average eddy size (integral scale) and the bulk mixing. Higher extents of conversion of CO to CO2 were found be increasing the bulk mixing and decreasing the average eddy size.

Cooper, L. P.↗
NASA NTRS1977

Jet engine air intake system

An axisymmetric air intake system for a jet aircraft engine comprising a fixed cowl extending outwardly from the face of the engine, a centerbody coaxially disposed within the cowl, and an actuator for axially displacing the centerbody within the cowl was developed. The cowl and centerbody define a main airflow passageway therebetween, the configuration of which is changed by displacement of the centerbody. The centerbody includes a forwardly-located closeable air inlet which communicates with a centerbody auxiliary airflow passageway to provide auxiliary airflow to the engine. In one embodiment, a system for opening and closing the centerbody air inlet is provided by a dual-member centerbody, the forward member of which may be displaced axially with respect to the aft member.

Sorensen, N. E.↗
NASA NTRS1977

Analysis of rocket engine injection combustion processes

Mixing methodology improvement for the JANNAF DER and CICM injection/combustion analysis computer programs was accomplished. ZOM plane prediction model development was improved for installation into the new standardized DER computer program. An intra-element mixing model developing approach was recommended for gas/liquid coaxial injection elements for possible future incorporation into the CICM computer program.

Salmon, J. W.↗
NASA NTRS1977

Device for tensioning test specimens within an hermetically sealed chamber

The device is characterized by a support column adapted to be received within an insulated, hermetically sealable chamber. A plurality of anchor pins are mounted on the column for releasibly connecting thereto a plurality of test specimens. A plurality of axially displaceable pull rods are received by the column in coaxial alignment with the anchor pins. One end of each pull rod is provided with a coupling for connecting the pull rod to a test specimen. The opposite end of the pull rod is entended through a cover plate and adapted to be connected with a remotely related linear actuator through a connecting link including a load cell for measuring stress as the pull rod is placed in tension by the actuator.

Evans, P. K.↗
NASA NTRS1977

Investigation of possible lower hybrid emission from the NASA Lewis bumpy torus plasma

Radio frequency emission has been detected near the power hybrid frequency of a bumpy torus plasma by using a responsive detection system that consists of a spectrum analyzer and a 50 ohm miniature coaxial antenna concentrically located in a re-entrant quartz tube. The frequency shift of a broad emission peak was monitored as a function of background pressure, electrode voltage, and the strength of the dc magnetic field. Simultaneous measurements of the average plasma density were made with a polarization diplexing microwave interferometer. The information derived from the experiment is discussed with particular reference to the following: (1) whether the emissions are dominated by atomic or molecular species of deuterium; (2) the strength of the dc magnetic field in the emitting region; (3) the geometric location of the emitting region of the plasma; (4) comparison of the lower hybrid plasma density with the average plasma density; and (5) relation of ion spoke geometry to lower hybrid emission.

Mallavarpu, R.↗
NASA NTRS1977

Circuit Methods for VLF Antenna Couplers

The limitations of different E-field antenna coupler or preamplifier circuits are presented. All circuits were evaluated using actual Loran or Omega signals. Electric field whip or wire antennas are the simplest types which can be used for reception of VLF signals in the 10 to 100 kHz range. JFET or MOSFET transistors provide impedance transformation and some voltage gain in simple circuits where the power for operating the preamplifier uses the same coaxial cable that feeds the signal back to the receiver. The circuit techniques provide useful alternative methods for Loran-Omega receiver system designers.

Burhans, R. W.↗