SEARCH · Engineering Papers

Results for “change”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Geospatial Diffusion for Land Cover Imperviousness Change Forecasting

Land-use and land-cover (LULC) has a significant effect on several Earth system processes. For example, impervious surfaces reduce infiltration and speed water flow, impacting regional hydrology and flood risk. While Earth System models have improved forecasting hydrologic and atmospheric processes at higher resolutions, the ability to forecast LULC change has lagged behind. In this paper, we propose a new paradigm exploiting Generative AI (GenAI) for land cover change forecasting by framing it as a data synthesis problem conditioned on historical and auxiliary data-sources. To demonstrate the feasibility of our methodology, we perform experiments where a diffusion model is trained for decadal forecasting of imperviousness change across the entire United States. We find that our model yields MAE lower than a no-change baseline for resolutions ≥ 0.7 X 0.7km2 on average, demonstrating its ability to capture and project accurate spatiotemporal patterns. Finally, we discuss future research to incorporate Earth's physical properties and enabling scenario simulations via driver variables.

Varshney, Debvrat [ORNL] (ORCID:0000000188981736)↗

DOE OSTI2022

Changes in Aerosols, Meteorology, and Radiation in the Southeastern U.S. Warming Hole Region during 2000 to 2019

Abstract Surface air temperatures in the southeastern United States that did not change from the climatological mean from 1900 to 2000 have increased since the year 2000. Analyzed herein are factors modulating the surface air temperatures in the region for a 20-yr period (2000–19) using space- and surface-based observations, and output from a reanalysis model. The 20-yr period is segregated into two decades, 2000–09 and 2010–19, corresponding to different tropospheric chemical regimes. Changes in seasonal and decadal averages are examined. The later decade experienced higher average surface air temperatures with significant warming during summer and fall seasons. Decadal and seasonal averages of cloud properties, column water vapor, rain rates, and top-of-atmosphere outgoing longwave radiation did not exhibit statistically significant differences between the two decades. The region experienced strong warm and moist advection during the winter months and very weak advection during the summer months. The later decade exhibited higher low-level moisture advection during the winter months than the earlier decade with insignificant changes in the temperature advection between the two decades. The later decade had significantly lower aerosol dry and liquid water mass during all seasons, along with lower aerosol optical depth, higher single scattering albedo, and lower top-of-the-atmosphere outgoing shortwave radiation during cloud-free conditions in the summer season. Collectively, these results suggest that changes in the aerosol direct radiative forcing are responsible for warming during summer months that experience weak advection and highlight seasonal differences in the temperature controlling mechanisms in the region.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

End-of-Century Changes in Orographic Precipitation with the Intermediate Complexity Atmospheric Research Model over the Western United States

Abstract Downscaled precipitation projections were created using the Intermediate Complexity Atmospheric Research (ICAR) model over the western United States to increase the physical realism in orographic precipitation changes. End-of-century simulations from eight models in phase 5 of the Coupled Model Intercomparison Project (CMIP5) were downscaled with ICAR and compared to the widely utilized statistically downscaled dataset, localized constructed analogs (LOCAs), to understand where and why projections of cool-season (September–May) precipitation differed. ICAR and LOCA precipitation projections were similar, but their sign differed in hydrologically relevant regions likely due to ICAR’s simulation of microphysics and mesoscale dynamics with high-resolution topography (6 km). In the Pacific Northwest, cool-season precipitation projections from ICAR showed an increase on the windward side of the Cascades and no significant change within the lee. This difference between the windward and leeward side was attributed to reduced zonal wind speeds, allowing more time for microphysical processes within ICAR. This contrast is enhanced by rain’s faster fall speed compared to snow, limiting transport into the lee. Meanwhile, LOCA projected an increase in precipitation across the Cascades. In the Upper Colorado River basin, LOCA projected an increase in precipitation in high elevation regions (>3000 m), but ICAR projected no significant change or a decrease in precipitation. High elevation differences were most evident in the spring and fall and were also attributed to a snow-to-rain transition and dynamical processes that impacted orographic enhancement within ICAR. Idealized, controlled studies are needed to better isolate individual processes, but these results underscore the importance of including microphysics and mesoscale dynamics within regional-scale precipitation projections. Significance Statement A set of global climate model simulations was downscaled using an atmospheric model that contains key physical equations, referred to as Intermediate Complexity Atmospheric Research (ICAR). ICAR was used to examine projected changes in end-of-century cool-season precipitation over mountains in the western United States. Precipitation projections from ICAR were similar to projections that used statistical relationships to downscale climate projections. However, projections differed between ICAR and statistically downscaled datasets in whether they increased, decreased, or stayed the same in specific, hydrologically relevant regions such as the eastern Cascades and high elevation areas of the Upper Colorado River basin. These differences were attributed to the simulation of physical processes in ICAR. The results highlight the importance of kilometer-scale atmospheric processes in regional climate projections.

Currier, William Ryan [NOAA/Physical Sciences Labo↗

DOE OSTI2020

Economic Valuation of Coccidioidomycosis (Valley Fever) Projections in the United States in Response to Climate Change

Coccidioidomycosis, or valley fever, is an infectious fungal disease currently endemic to the southwestern United States. Symptoms of valley fever range in severity from flu-like illness to severe morbidity and mortality. Warming temperatures and changes in precipitation patterns may cause the area of endemicity to expand northward throughout the western United States, putting more people at risk for contracting valley fever. This may increase the health and economic burdens from this disease. We developed an approach to describe the relationship between climate conditions and valley fever incidence using historical data and generated projections of future incidence in response to both climate change and population trends using the Climate Change Impacts and Risk Analysis (CIRA) framework developed by the U.S. Environmental Protection Agency. We also developed a method to estimate economic impacts of valley fever that is based on case counts. For our 2000–15 baseline time period, we estimated annual medical costs, lost income, and economic welfare losses for valley fever in the United States were 400,000 USD per case, and the annual average total cost was 3.9 billion USD per year. For a high greenhouse gas emission scenario and accounting for population growth, we found that total annual costs for valley fever may increase up to 164% by year 2050 and up to 380% by 2090. By the end of the twenty-first century, valley fever may cost 620,000 USD per case and the annual average total cost may reach $18.5 billion per year. This work contributes to the broader effort to monetize climate change–attributable damages in the United States.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Infrared phase-change chiral metasurfaces with tunable circular dichroism

Integrating phase-change materials in metasurfaces has emerged as a powerful strategy to realize optical devices with tunable electromagnetic responses. Here, phase-change chiral metasurfaces based on GST-225 material with the designed trapezoid-shaped resonators are demonstrated to achieve tunable circular dichroism (CD) responses in the infrared regime. The asymmetric trapezoid-shaped resonators are designed to support two chiral plasmonic resonances with opposite CD responses for realizing switchable CD between negative and positive values using the GST phase change from amorphous to crystalline. The electromagnetic field distributions of the chiral plasmonic resonant modes are analyzed to understand the chiroptical responses of the metasurface. Furthermore, the variations in the absorption spectrum and CD value for the metasurface as a function of the baking time during the GST phase transition are analyzed to reveal the underlying thermal tuning process of the metasurface. The demonstrated phase-change metasurfaces with tunable CD responses hold significant promise in enabling many applications in the infrared regime such as chiral sensing, encrypted communication, and thermal imaging.

42 ENGINEERING↗

DOE OSTI2023

Changing temperature profiles and the risk of dengue outbreaks

As temperatures change worldwide, the pattern and competency of disease vectors will change, altering the global distribution of both the burden of infectious disease and the risk of the emergence of those diseases into new regions. To evaluate the risk of potential summer dengue outbreaks triggered by infected travelers under various climate scenarios, we develop an SEIR-type model, run numerical simulations, and conduct sensitivity analyses under a range of temperature profiles. Our model extends existing theoretical frameworks for studying dengue dynamics by introducing temperature dependence of two key parameters: the mosquito extrinsic incubation period and the lifespan of mosquitoes, which empirical data suggests are both highly temperature dependent. We find that changing temperature significantly alters dengue risk in an inverted U-shape, with temperatures in the range 27-31°C producing the highest risk. As temperatures increase beyond 31°C, the determinants of dengue risk begin to shift from mosquito biting rate and carrying capacity to the duration of the human infectious period, suggesting that changing temperatures not only alter dengue risk but also the potential efficacy of control measures. To illustrate the role of spatial and temporal temperature heterogeneity, we select five US cities where the primary dengue vector, the mosquito Aedes aegypti , has been observed, and which have had dengue cases in the past: Los Angeles, Houston, Miami, Brownsville, and Phoenix. Our analysis suggests that an increase of 3°C leads to an approximate doubling of the risk of dengue in Los Angeles and Houston, but a reduction of risk in Miami, Brownsville, and Phoenix due to extreme heat.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Identifying ecological and evolutionary research targets and risks in climate change studies to break barriers to broad inference

Understanding the responses of plants, microbes, and their interactions to long-term climate change is essential to identifying the traits, genes, and functions of organisms that maintain ecosystem stability and function of the biosphere. However, many studies investigating organismal responses to climate change are limited in their scope along several key ecological, evolutionary, and environmental axes, creating barriers to broader inference. Broad inference, or the ability to apply and validate findings across these axes, is a vital component of achieving climate preparedness in the future. Breaking barriers to broad inference requires accurate cross-ecosystem interpretability and the identification of reliable frameworks for how these responses will manifest. Current approaches have generated a valuable, yet sometimes contradictory or context dependent, understanding of responses to climate change factors from the organismal- to ecosystem-level. In this synthesis, we use plants, soil microbial communities, and their interactions as examples to identify five major barriers to broad inference and resultant target research areas. We also explain risks associated with disregarding these barriers to broad inference and potential approaches to overcoming them. Developing and funding experimental frameworks that integrate basic ecological and evolutionary principles and are designed to capture broad inference across levels of organization is necessary to further our understanding of climate change on large scales.

Love, Sarah J. (ORCID:0000000180787373)↗

DOE OSTI2022

Microbial extracellular enzyme activity with simulated climate change

It is critical to understand the consequences of environmental change for the microbial regulation of carbon and nutrient cycling. Specifically, understanding microbial community traits, such as extracellular enzyme activity, can help inform nutrient cycling models and address knowledge gaps. We analyzed data on extracellular enzyme activities and litter decomposition from an 18-month experiment in which microbial communities were reciprocally transplanted along a climate gradient in Southern California. Communities were from desert, scrubland, grassland, pine–oak, and subalpine ecosystems. We aimed to test how enzyme activities responded to climate change following transplantation and how those responses related to decomposition rates. We hypothesized that microbial communities would specialize on their native climate conditions, resulting in higher enzyme activities when transplanted back into their native climate. We investigated the relationship between extracellular enzyme Vmax values, substrate mass loss, and microbial biomass as well as variation in these variables across the climate gradient. We found little evidence for climate specialization, and there was rarely a reduction in enzyme functioning after microbial communities were transplanted into new climate conditions. Moreover, observed differences in decomposition were not related to changes in extracellular enzyme potential, although there were significant differences in enzyme activities and decomposition rates across sites. These results suggest that direct, physiological impacts of climate are likely to be important for enzyme-mediated decomposition, but climate specialization will not constrain the microbial response to climate change in our system.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

Heat Pumps with Phase Change Thermal Storage: Flexible, Efficient, and Electrification Friendly

As we continue to electrify space- and water-heating, the electricity demand profile of many buildings will change significantly, and periods of high electricity demand will likely not align with renewable energy generation. We expect electricity demands will increase substantially in the winter, annual maximum electricity demands will increase, and more regions will experience annual peak electrical demands – and higher wholesale electricity prices – in the winter. This is especially important for cold climates where 60% of site energy use in buildings is for heating, and where heat pumps perform least efficiently. This paper focuses on one promising solution among the many paths to electrification: the use of phase change materials (PCM) for compact low-cost thermal energy storage (TES). We present the design and simulation of a combi heat pump and phase change thermal storage system used for space- and water-heating in a multifamily residence in a cold climate. To assess the benefits of this technology, we compare its annual performance to that of a current state-of-the-art air-to-air heat pump and separate heat pump water heater. Simulation results for IECC Climate Zone 6A reveal that the combi heat pump with phase change thermal storage can reduce the design size for heat pumps by 40-60%, reduce maximum electric demand by 30-50%, reduce electricity use during 4-12-hour load shed periods by 50%, and avoid the need for auxiliary electric resistance for both space- and water-heating. Tariff structures are highly varied between different utilities and currently reflect higher wholesale market prices for electricity during summer days. Consequently, although this system design provides large electric demand reductions during hypothetical 4-12-hour load shed periods, it does not provide energy cost reductions with current winter residential time-of-use tariffs.

Helmns, Dre↗

DOE OSTI2020

Potential Impacts of Accelerated Climate Change (4th Annual Report)

Pacific Northwest National Laboratory (PNNL) has completed the fourth year draft Annual Letter Report that summarizes i) NRC needs for climate and hydrologic information, ii) recent research into climate and hydrologic changes that may affect nuclear power plants; iii) recent reports by federal agencies, as well as national and international organizations tasked with climate change research and developing policy with respect to climate change and mitigation; and iv) trends and advances in accommodating required climate change estimates in site specific evaluations. The Northeast U.S., a region defined by the Forth National Climate Assessment is the focus of this report. The NRC COR will review and provide comments on this draft within four weeks.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

Microstructural Changes to Thermally Sprayed Materials Subjected to Dynamic Compression

Dynamic compression of materials can induce a variety of microstructural changes. As thermally-sprayed materials have highly complex microstructures, the expected pressure at which changes occur cannot be predicted a priori. In addition, typical in-situ measurements such as velocimetry are unable to adequately diagnose microstructural changes such as failure or pore collapse. Quasi-isentropic compression experiments with sample recovery were conducted to examine microstructural changes in thermally sprayed tantalum and tantalum-niobium blends up to 8 GPa pressure. Spall fracture was observed in all tests, and post-shot pore volume decreased relative to the initial state. The blended material exhibited larger spall planes with fracture occurring at interphase boundaries. An estimate of the pressure at which pore collapse is complete was determined to be ~26 GPa for pure tantalum and ~19 GPa for the tantalumniobium blend under these loading conditions.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Predicting Future Disease Burden in a Rapidly Changing Climate

The interplay of a rapidly changing climate and infectious disease occurrence is emerging as a critical topic, requiring investigation of possible direct, as well as indirect, connections between disease processes and climate-related variation and phenomena. First, we introduce and overview three infectious disease exemplars (dengue, influenza, valley fever) representing different transmission classes (insect-vectored, human-to-human, environmentally-transmitted) to illuminate the complex and significant interplay between climate disease processes, as well as to motivate discussion of how Sandia can transform the field, and change our understanding of climate-driven infectious disease spread. We also review state-of-the-art epidemiological and climate modeling approaches, together with data analytics and machine learning methods, potentially relevant to climate and infectious disease studies. We synthesize the modeling and disease exemplars information, suggesting initial avenues for research and development (R&D) in this area, and propose potential sponsors for this work. Whether directly or indirectly, it is certain that a rapidly changing climate will alter global disease burden. The trajectory of climate change is an important control on this burden, from local, to regional and global scales. The efforts proposed herein respond to the National Research Councils call for the creation of a multidisciplinary institute that would address critical aspects of these interlocking, cascading crises.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

The Study of Environmental Arctic Change (SEARCH) Arctic Futures 2050 Conference. Final Report

The Arctic Futures 2050 Conference was designed as a novel convening of Arctic scientists, Indigenous people, and decision makers, including policy makers at all levels of government. The conference was held 4–6 September 2019 in Washington, D.C. and gathered nearly 400 participants to explore six questions: What do we know, and what do we need to know about the Arctic—and why does it matter? What challenges confront policy makers in the rapidly changing Arctic? What basic research is needed to inform responses to Arctic change? What applied research is needed to inform responses to change? What tools can facilitate informing policy making with science and Indigenous knowledge? What opportunities exist for partnerships between policy makers and scientists? A conference report (see: https://www.searcharcticscience.org/arctic-2050/conference-2019/products) detailed all conference discussions. The main conference conclusion was that holistic understanding and useful adaptation to rapid Arctic change requires bringing together scientists, Indigenous Knowledge holders, and policy makers in all phases of defining the problems, conducting research, and sharing knowledge.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

Paleo-Megadroughts and Abrupt Climate Changes in the Speleothem Records. Final report

This project is motivated by the speleothem isotope records in Asia, which show regional responses in the hydrologic cycle to different climate forcings. Speleothem isotopic records are typically interpreted in terms of local precipitation variations or monsoon intensity. Our study demonstrates that non-local processes also play an important role. We started this project to understand the regional difference in speleothem isotopic composition between the Last Glacial Maximum (LGM) and the present-day. The record in Southwest China showed greater depletion during the LGM compared to those in East China. Our modeling and analysis showed that speleothems record, in addition, large scale changes in atmospheric circulation and moisture transport and their subsequent impact on precipitation. We developed an algorithm to partition total precipitation according to their formation dynamics, namely into frontal and non-frontal precipitation, and showed that the two have different trends and hence different causal mechanism. We then focused our subsequent attention on circulation impacts on precipitation changes. We applied a machine learning algorithm to detect rainbands in the ERA-Interim reanalysis product, and showed that the seasonal migrations of the rainbands are tied to the seasonal migrations of the jet stream, in particular the northerlies of the jet meanders. These northerlies, in turn, are partly topographic Rossby waves excited as the upstream westerlies impinge on the Tibetan Plateau. The seasonal variations of these upstream westerlies thus contribute to the seasonal movements of the rainbands and regional precipitation changes. Our analysis of the modern precipitation isotope record further confirms the importance of jet stream changes in the isotopic variations and shows that isotope-enriched years have reduced summer seasonality, with less pronounced northward migration of the jet.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

Land Surface Modeling 2.0 for agricultural climate change impact assessments

Focus Area: This white paper addresses DOE AI4ESP focus area #2 by providing a sketch blueprint for a next generation, hybrid AI/process-based global Land Surface Modeling (LSM) framework to improve projections of climate change impacts on the land surface system including agriculture and the hydrological cycle. Science Challenge: Climate change impacts on agriculture are highly uncertain: -50% to +150% global production changes for major grains under high-end climate change, for example. The core challenge in land surface system predictability is the large gap between the scale at which the relevant biological processes act and the scale at which the risks need to be assessed. Conventional empirical and process-based modeling approaches are insufficient. A new multi-scale modeling paradigm which employs AI/ML to learn from new streams of remote sensing data and targeted ’gene-to-global’ simulations is needed.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

Calculated Roughness Changes due to Clear-Cutting At Savannah River Site

At the Savannah River Site (SRS), multiple facilities are routinely producing and working with radiological constituents which require safety basis modeling by the National Nuclear Safety Administration. The models used to determine the safety basis employ roughness length as an input parameter which describes the roughness of the ground surface which influences momentum exchange near the surface and the subsequent generation of mechanical turbulence. Because roughness length is dependent on surface characteristics, including vegetation, any changes to the surface would have a subsequent impact on the roughness length and require a new safety basis analysis to be performed. An analysis of measurements prior to and after the dear-cuts and thinning was performed and roughness lengths were calculated for each of sixteen wind sectors. Not all sectors contained dear-cuts, so this provides comparison of natural variations in roughness. Based on the results of the estimated changes, consideration will be given to how these changes may affect atmospheric dispersion modeling. It was found that clear-cutting activities generally led to a reduction in roughness. Reductions in roughness length also occurred in some of the wind sectors containing only undisturbed forest, but those in sectors with dear-cuts were found to be slightly greater in magnitude than natural variation. Only in one instance was the change in roughness length found to exceed a decrease of 10%, indicating that there is no significant safety basis to the site as a whole based on previous clear-cutting activities.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

Impact of Changes in ENDF/B-VII.1 and ENDF/B-VIII.0 235U Nuclear Data Indicated by NDSE Studies on LLNL Pulsed Sphere Simulations

A recent journal article by J.A. Gomez et al. measured gamma-ray die-off curves of three subcritical static highly-enriched uranium (HEU) assemblies driven by an external neutron source with a new detector system. This new detector system was developed for being used in dynamically driven subcritical assemblies as part of the Neutron Diagnosed Subcritical Experiments (NDSE) program. Simulations of these die-off curves with various nuclear data and comparison to experimental data indicated that a decrease of the ENDF/B-VII.1 235 U(n,inl) cross section by a factor 0.8 and 0.85 for ENDF/B-VIII.0 would lead to better predictions of experimental data. Here, we test the proposed changes with another type of measurement response, namely neutron-leakage spectra emitted in LLNL pulsed sphere measurements. These spheres were pulsed by 14-MeV neutrons produced via the D+T reaction in their center. The proposed changes in nuclear data have a distinctly smaller impact on predicting pulsed-sphere neutron-leakage spectra than for the die-off curves; they lead to a worsened prediction of the inelastic valley of LLNL pulsed-sphere neutron spectra indicating that the proposed change could constitute a compensating error. Changes in the inelastic angular distributions along with the cross section might be worthwhile to study

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2022

Weighted Average Percentage Change of Quantifiable Parameters for Wireless and Wired Manufacturing Networks

In industry, companies are constantly trying to boost - the efficiency of their industrial production, and several of these companies have implemented Wireless Fidelity (WiFi) to increase their efficiency. This research concentrates on looking at different referring papers in an attempt to quantify the amount of efficiency or change in values of different parameters to measure the overall impact produced by implementing wireless service in the manufacturing plant. The results found were that implementing wireless connections, and in most cases, Wi-Fi, might produce efficiencies normally ranging from 17%-34% depending on what each industry weighted or prioritized. These percentage changes could be used to decide if implementing wireless manufacturing is soluble, or if it might not be necessary at this moment. The amount of percentage change differs from place to place, yet a general way of averaging the changes brought by wireless is discussed and calculated.

97 MATHEMATICS AND COMPUTING↗