Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “catalyst design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Synergistic Catalysis between Pd and Fe in Gas Phase Hydrodeoxygenation of m-Cresol

In this work, a series of Pd/Fe2O3 catalysts were synthesized, characterized, and evaluated for the hydrodeoxygenation (HDO) of m-cresol. It was found that the addition of Pd remarkably promotes the catalytic activity of Fe while the product distributions resemble that of monometallic Fe catalyst, showing high selectivity towards the production of toluene (C-O cleavage without saturation of aromatic ring and C-C cleavage). Reduced catalysts featured with Pd patches on the top of reduced Fe nanoparticle surface, and the interaction between Pd and Fe was further confirmed using X-ray photoelectron spectroscopy (XPS), scanning transmission electron microscopy (STEM) and X-ray absorption near edge fine structure (XANES). A possible mechanism, including Pd assisted H2 dissociation and Pd facilitated stabilization of metallic Fe surface as well as Pd enhanced product desorption, is proposed to be responsible for the high activity and HDO selectivity in Pd-Fe catalysts. The synergic catalysis derived from Pd-Fe interaction found in this work was proved to be applicable to other precious metal promoted Fe catalysts, providing a promising strategy for future design of highly active and selective HDO catalysts.

09 BIOMASS FUELS↗

Theory Aided Design of Active and Durable Nanoscale Cathode Catalysts (Final Report)

One of the greatest technological hurdles to deployment of fuel cells relates to the sluggish activity, low durability and the high cost of the catalysts that are currently employed. For automotive PEM fuel cells to become commercially viable, the Pt-specific power density would need to be reduced to less than 0.2gPt/kW (at cell voltages >0.65 V). This would require the Pt loadings to be less than 0.15 mg Pt /cm 2 MEA within the membrane electrode assembly. This could be achieved by enhancing the catalytic activity at the cathode, thus lowering its overpotential. Various different Pt-alloys have shown 2-4 times enhanced activities over Pt alone but still suffer some of the same durability issues as that of the pure Pt. There is a general loss of active Pt due to dissolution and sintering. While there have been a number of elegant fundamental experimental and theoretical studies on ideal single crystal Pt and Pt alloy surfaces which have helped to elucidate the factors that control the activity, there have been very few fundamental studies focused on the stability, reactivity and durability of well-defined Pt nanoparticles. We carried out ab initio density functional theory together with a novel double reference method that we developed to simulate constant potential electrochemical systems in order to model the electrocatalytic reduction of oxygen over model Pt alloy surfaces and nanoparticles. These simulations were used to probe the factors that control the electrocatalytic activity, guide the potential selection of new materials and test their stability under reaction conditions. Ab initio calculations were used to determine the reaction energies and activation barriers for a comprehensive array of different elementary adsorption, desorption, surface reaction and diffusion steps over Pt and Pt alloys involved in the electroreduction of oxygen as a function of surface coverage, the electrochemical potential and temperature. The calculations were used to simulate the potential dependent adsorption and surface reaction energies along with activation barriers in order to determine the kinetics for different surface structures and structural features (step edge and corner sites) to provide the necessary input for kinetic Monte Carlo simulations to follow the rates of reaction. More coarse-grained simulated annealing methods were used to help establish the lowest energy structures and morphologies for different Pt and Pt-alloy nanoparticles that form. The results from the DFT calculations were used to establish an ab initio-derived kinetic database that was used in both 2D and 3D kinetic Monte Carlo simulations that were used to follow the electrocatalytic performance over different particle sizes, shapes and compositions. The ab initio calculations together with the kinetic Monte Carlo simulations were used to complete the following objectives: 1) Determine the controlling elementary reaction pathways and intrinsic kinetics involved in ORR and their potential dependent behavior; 2) Establish the influence of the extrinsic reaction environment including surface structure, alloy composition and spatial arrangement and the humidity on ORR kinetics; 3) Elucidate the effects of particle size and morphology as well as the atomic structure and composition of nanoparticles of Pt, Pt 3 Co, Pt 3 Ni, Pt 3 Fe and other Pt-alloys on the electrocatalytic activity and reaction selectivity; 5) Construct surface Pourbaix phase diagrams for different Pt and Pt-alloys in order to map out the most stable surface phases for different material compositions and reaction conditions; 6) Elucidate the mechanisms that control dissolution and re-deposition of Pt.

08 HYDROGEN↗

Supported Molecular Catalysts: Synthesis, in-situ Characterization and Performance

The technological advantages of solid catalysts (robustness for operation at high temperatures, lack of corrosion, and ease of separation of products) can be combined with the advantages of soluble catalysts (e.g., selectivity) by synthesis of structurally discrete, nearly uniform catalysts on supports. Our goal is to synthesize, characterize, test, and model such catalysts and their reactions, thereby opening a door to unprecedented fundamental understanding of the properties of such materials. We employ molecular chemistry in nano-scale cages of zeolites and on surfaces of tailored porous solids for the precise synthesis of catalysts with discrete, uniform, well-defined sites, primarily mononuclear metal complexes, characterizing them (sometimes in the functioning state) with a broad range of complementary experimental techniques and using computational chemistry to interpret the results, map out reaction paths, provide bases for the design of new catalysts, improve methods of data analysis, and identify key experiments. The effort is directly in support of DOE's energy, environmental, and national security missions as well as the support of DOE's basic science mission to develop the tools and understanding needed for the success of the applied mission areas. The research is demonstrating progress in understanding, modeling, and controlling chemical reactivity at interfaces to develop a fundamental understanding of how to control catalytic reactions for a broad range of applications.

36 MATERIALS SCIENCE↗

A general mechanism for stabilizing the small sizes of precious metal nanoparticles on oxide supports

We recently discovered that MgAl2O4 spinel {111} nano-facets optimally stabilize the small sizes of platinum nanoparticles even after severe high temperature aging treatments. Here we report the thermal stabilities of other precious metals with various physical and chemical properties on the MgAl2O4 spinel {111} facets, providing important new insights into the stabilization mechanisms. Besides Pt, Rh and Ir can also be successfully stabilized as small (1-3 nm) nanoparticles and even as single atomic species after extremely severe (800 °C, 1 week) oxidative aging. However, other metals either aggregate (Ru, Pd, Ag, and Au) or sublimate (Os) even during initial catalyst synthesis. On the basis of ab initio theoretical calculations and experimental observations, we rationalize that the exceptional stabilization originates from lattice matching, and the correspondingly strong attractive interactions at interfaces between the spinel {111} surface oxygens and epitaxial metals\metal oxides. On this basis, design principles for catalyst support oxide materials that are capable in stabilizing precious metals are proposed.

anti-sintering↗

Trend in the Catalytic Activity of Transition Metals for the Oxygen Reduction Reaction by Lithium

Periodic density functional theory (DFT) calculations indicate that the intrinsic activity of Au, Ag, Pt, Pd, Ir, and Ru for the oxygen reduction reaction by Li (Li-ORR) forms a volcano-like trend with respect to the adsorption energy of oxygen, with Pt and Pd being the most active. The trend is based on two mechanisms: the reduction of molecular O{sub 2} on Au and Ag and of atomic O on the remaining metals. Step edges are found to be more active for catalyzing the Li-ORR than close-packed surfaces. Our findings identify important considerations in the design of catalyst-promoted air cathodes for nonaqueous Li-air batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Design and synthesis of bimetallic electrocatalyst with multilayered Pt-skin surfaces.

Advancement in heterogeneous catalysis relies on the capability of altering material structures at the nanoscale, and that is particularly important for the development of highly active electrocatalysts with uncompromised durability. Here, we report the design and synthesis of a Pt-bimetallic catalyst with multilayered Pt-skin surface, which shows superior electrocatalytic performance for the oxygen reduction reaction (ORR). This novel structure was first established on thin film extended surfaces with tailored composition profiles and then implemented in nanocatalysts by organic solution synthesis. Electrochemical studies for the ORR demonstrated that after prolonged exposure to reaction conditions, the Pt-bimetallic catalyst with multilayered Pt-skin surface exhibited an improvement factor of more than 1 order of magnitude in activity versus conventional Pt catalysts. The substantially enhanced catalytic activity and durability indicate great potential for improving the material properties by fine-tuning of the nanoscale architecture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Novel inverse oxide/metal catalysts for methanol synthesis: impact of oxide–metal interactions and reversible morphological changes

Inverse oxide/metal catalysts have proved to be excellent systems for the generation of methanol by CO 2 hydrogenation or the partial oxidation of methane. These systems can exhibit unique structural and chemical properties due to the nano size of the oxide component and strong oxide–metal interactions. Recent studies for ZnO/Cu, CeO 2 /Cu, TiO 2/ Cu, MgO/Cu, In 2 O 3 /Cu, and In 2 O 3 /Au catalysts have shown large variations in the composition and morphology of the oxide overlayer as a function of temperature and chemical environment. These oxide–metal interfaces are able to react with CO 2 and CH 4 at room temperature, and both reactants have a strong influence on the physical and chemical properties of the catalysts. Under reaction conditions, switches between oxide–metal and metal–metal interfaces can take in the catalyst surface. A dynamic behavior that can be linked to a high selectivity for methanol production over systems such as ZnO/Cu, CeO 2 /Cu and In 2 O 3 /Au. Finally, this type of correlation deserves additional systematic studies since it could be a powerful tool for designing highly efficient catalysts for methanol synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Origin of Regioselectivity in 2-butanol Dehydration on Solid Acid Catalysts

The origin in the variations of trans-/cis-2-butene product selectivity ratios in 2-butanol dehydration over solid acid catalysts were investigated using a combined experimental-theory approach. Reactivity measurements over γ-Al2O3, AlOx/SBA-15, and H-form zeolites with widely varying Si/Al ratios and pore structures showed over two orders of magnitude change in the trans-/cis-2-butene product ratio. Activation energy barriers calculated for the concerted C-O and β-C-H bond breakings of adsorbed butoxy intermediates by dispersion-corrected DFT calculations correctly predicted the trans-/cis-2-butene product ratio observed on γ-Al2O3. The very low trans-2-butene selectivity on γ-Al2O3 can now be understood by the formation of a late transition state with high energy barrier caused by the strong van der Waals interaction between the γ-H atoms and the flat catalyst surface. Decreasing the dispersive attractive force between the adsorbed butoxide and the surface (e.g., by moving it further away from the support surface in AlOx/SBA-15) leads to almost equimolar formation of the trans- and cis-2-butene isomers. Trans-/cis-2-butene selectivity ratios much higher than that dictated by thermodynamic equilibrium can be achieved by introducing additional geometric constraints around the active catalytic site (e.g., varying the 3D environment around the active center in zeolites). We propose a model to explain the widely varying trans-/cis-2-butene selectivity in 2-butanol dehydration over solid acid catalysts that is consistent with the experimental results in this study. A key outcome of the study is the realization that van der Waals interactions between the reactant and the active catalyst surface must be included in the theoretic models in order to be able to accurately predict product selectivities. This information, in turn, significantly advances our ability to develop catalyst materials with designed active centers in order to achieve desired regioselectivities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Improving intrinsic oxygen reduction activity and stability: Atomic layer deposition preparation of platinum-titanium alloy catalysts

Improved activity and stability Pt-based catalysts for the oxygen reduction reaction (ORR) are needed to perpetuate the deployment of polymer electrolyte fuel cells (PEFCs) in the transportation sector. In this study, we use atomic layer deposition of TiO 2 and Pt coupled with thermal reductive annealing to prepare Pt 3 Ti electrocatalysts. The atomic level synthetic control resulted in Pt 3 Ti nanoparticles with high ORR performance, including a mass activity of 1.84 A/mg Pt and excellent electrochemical stability. The Pt 3 Ti nanoparticles show excellent specific activity — 5.3-fold higher than commercial Pt/C and 3-fold higher than polycrystalline Pt, exceeding the performance of any PtTi catalysts reported to date. Combined experimental and computational efforts indicate that Pt enrichment on the Pt 3 Ti enhances the activity, and the intrinsic stability of the Pt 3 Ti phase provides durability. Subsequently, this knowledge, along with the facile fabrication of alloys by atomic layer deposition, can be leveraged to designed improved performance catalysts.

25 ENERGY STORAGE↗

A single-atom library for guided monometallic and concentration-complex multimetallic designs

Atomically dispersed single-atom catalysts have the potential to bridge heterogeneous and homogeneous catalysis. Dozens of single-atom catalysts have been developed, and they exhibit notable catalytic activity and selectivity that are not achievable on metal surfaces. Although promising, there is limited knowledge about the boundaries for the monometallic single-atom phase space, not to mention multimetallic phase spaces. Here, single-atom catalysts based on 37 monometallic elements are synthesized using a dissolution-and-carbonization method, characterized and analyzed to build the largest reported library of single-atom catalysts. In conjunction with in situ studies, we uncover unified principles on the oxidation state, coordination number, bond length, coordination element and metal loading of single atoms to guide the design of single-atom catalysts with atomically dispersed atoms anchored on N-doped carbon. We utilize the library to open up complex multimetallic phase spaces for single-atom catalysts and demonstrate that there is no fundamental limit on using single-atom anchor sites as structural units to assemble concentration-complex single-atom catalyst materials with up to 12 different elements. Furthermore, our work offers a single-atom library spanning from monometallic to concentration-complex multimetallic materials for the rational design of single-atom catalysts.

36 MATERIALS SCIENCE↗

Insights into Heterogeneous Catalysts under Reaction Conditions by In Situ/Operando Electron Microscopy

The advancement of clean energy and environment depends strongly on the development of efficient catalysts in a wide range of heterogeneous catalytic reactions, which has benefited from transmission electron microscopic techniques in determining the atomic-scale morphologies and structures. However, it is the morphology and structure under the catalytic reaction conditions that determine the performance of the catalyst, which has captured a surge of interest in developing and applying in situ/operando transmission electron microscopic techniques in heterogeneous catalysis. The major theme of this review is to highlight some of the most recent insights into heterogeneous catalysts under the relevant reaction conditions using in situ/operando transmission electron microscopic techniques. Rather than a comprehensive overview of the basic principles of in situ/operando techniques, this review focuses on the insights into the atomic-scale/nanoscale details of various catalysts ranging from single-component to multicomponent catalysts under heterogeneous catalytic, electrocatalytic, and photocatalytic reaction conditions involving both gas–solid and liquid–solid interfaces. Here, this focus is coupled with discussions of the correlation of the atomic, molecular, and nanoscale morphology, composition, and structure with the catalytic properties under the reaction conditions, shining light on the challenges and opportunities in design of nanostructured catalysts for clean and sustainable energy applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Role of Co 2 C in ZnO-promoted Co Catalysts for Alcohol Synthesis from Syngas

Controlling selectivity is a key goal in the design of a heterogeneous catalyst. Herein, we present detailed characterization and activity of silica–supported cobalt catalysts modified by atomic layer deposition of ZnO. After reduction, the resulting catalysts exhibit substantial selectivity towards alcohol production during CO hydrogenation compared to catalysts containing only cobalt. The prepared catalysts have up to 46 % selectivity toward alcohols with 39 % of the alcohols corresponding to ethanol and other higher alcohols, albeit with reduced activity. In situ characterization of the catalyst by X–ray diffraction and X–ray absorption spectroscopy reveals details on the structural evolution in syngas, CO+H 2 , and shows that ZnO promotion of Co results in the formation of Co 2 C under catalytic conditions. A mechanism is proposed, supported by density functional theory calculations, which explains Co 2 C formation by the blocking of Co step sites by Zn species. The ZnO acts a dual promoter both by facilitating Co 2 C formation and by modifying the resulting Co 2 C. In conclusion, the Co 2 C formed from the ZnOpromoted Co catalysts displays improved thermal stability and selectivity compared with similar Co 2 C catalysts without Zn.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bio-Inspired Molecular Catalysts for Hydrogen Oxidation and Hydrogen Production

Recent advances in Ni-based bio-inspired catalysts obtained in the Center for Molecular Electrocatalysis, an Energy Frontier Research Center (EFRC) at the Pacific Northwest National Laboratory, demonstrated the possibility of cleaving H2 or generating H2 heterolytically with turnover frequencies comparable or superior to those of hydrogenase enzymes. In these catalysts the transformation between H2 and protons proceeds via an interplay between proton, hydride and electron transfer steps and involves the interaction of a dihydrogen molecule with both a Ni(II) center and with pendant amine bases incorporated in a six-membered ring, which act as proton relays. These catalytic platforms are well designed in that when protons are correctly positioned (endo) toward the Raugei-ACS-Books.docxPrinted 12/18/12 2 metal center, catalysis proceeds at very high rates. We will show that the proton removal (for H2 oxidation) and proton delivery (for H2 production) are often the rate determining steps. Furthermore, the presence of multiple protonation sites gives rise to reaction intermediates with protons not correctly positioned (exo relative to the metal center). These isomers are easily accessible kinetically and are detrimental to catalysis because of the slow isomerization processes necessary to convert them to the catalytically competent endo isomers. In this chapter we will review the major findings of our computational investigation on the role of proton relays for H2 chemistry and provide guidelines for the design of new catalysts. This research was carried out in the Center for Molecular Electrocatalysis, an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science. Pacific Northwest National Laboratory is operated for the U.S. Department of Energy by Battelle. Computational resources were provided at W. R. Wiley Environmental Molecular Science Laboratory (EMSL), a Raugei-Bio-Inspired Molecular-Catalysts-for-Hydrogen- Oxidation-and-Hydrogen-Production.doc Printed 12/18/2012 23 national scientific user facility sponsored by the Department of Energy’s Office of Biological and Environmental Research located at Pacific Northwest National Laboratory, the National Energy Research Scientific Computing Center (NERSC) at Lawrence Berkeley National Laboratory, and the Jaguar supercomputer at Oak Ridge National Laboratory (INCITE 2008-2011 award supported by the Office of Science of the U.S. DOE under Contract No. DE-AC0500OR22725).

Environmental Molecular Sciences Laboratory↗

Fuel Processors for PEM Fuel Cells

Fuel cells are being developed to power cleaner, more fuel efficient automobiles. The fuel cell technology favored by many automobile manufacturers is PEM fuel cells operating with H 2 from liquid fuels like gasoline and diesel. A key challenge to the commercialization of PEM fuel cell based powertrains is the lack of sufficiently small and inexpensive fuel processors. Improving the performance and cost of the fuel processor will require the development of better performing catalysts, new reactor designs and better integration of the various fuel processing components. These components and systems could also find use in natural gas fuel processing for stationary, distributed generation applications. Prototype fuel processors were produced, and evaluated against the Department of Energy technical targets. Significant advances were made by integrating low-cost microreactor systems, high activity catalysts, π-complexation adsorbents, and high efficiency microcombustor/microvaporizers developed at the University of Michigan. The microreactor system allowed (1) more efficient thermal coupling of the fuel processor operations thereby minimizing heat exchanger requirements, (2) improved catalyst performance due to optimal reactor temperature profiles and increased heat and mass transport rates, and (3) better cold-start and transient responses.

08 HYDROGEN↗

Hydrogenation of Diesters on Copper Catalyst Anchored on Ordered Hierarchical Porous Silica: Pore size effect

An ordered hierarchically porous silica (HPS) with the coexistence of both mesopores and abundant micropores was fabricated and used as support for the preparation of copper-based catalysts (Cu/HPS). The ordered mesoporous structure of the Cu/HPS catalysts was retained. In addition, both Cu0 and Cu+ species are found to be highly dispersed. It might be attributed to the anchoring effect of micropores and the formation of Cu-O-Si species derived from the strong interaction between surface silica and copper precursor. The Cu/HPS catalysts showed excellent performances in the hydrogenation of dimethyl adipate. The catalytic activity in dimethyl oxalate hydrogenation depended on the surface reaction, while the activity in dimethyl adipate hydrogenation will be readily controlled by pore diffusion, which can be improved by tailoring the pore size of HPS. These findings could be meaningful instruction for the rational design of industrial catalysts for the hydrogenation of various diesters.

ester, hydrogenation, higherarchical, copper, diff↗

Guidelines to Achieving High Selectivity for the Hydrogenation of α,β-Unsaturated Aldehydes with Bimetallic and Dilute Alloy Catalysts: A Review

Selective hydrogenation of unsaturated aldehydes to unsaturated alcohols is a challenging class of reactions, yielding valuable intermediates for the production of pharmaceuticals, perfumes, and flavorings. On monometallic heterogeneous catalysts, the formation of the unsaturated alcohols is thermodynamically disfavored over the saturated aldehydes. Hence, new catalysts are required to achieve the desired selectivity. In this work, the literature of three major research areas in catalysis is integrated as a step toward establishing the guidelines for enhancing the selectivity: reactor studies of complex catalyst materials at operating temperature and pressure, surface science studies of crystalline surfaces in ultrahigh vacuum, and first-principles modeling using density functional theory calculations. Aggregate analysis shows that bimetallic and dilute alloy catalysts significantly enhance the selectivity to the unsaturated alcohols compared to monometallic catalysts. This comprehensive review focuses primarily on the role of different metal surfaces as well as the factors that promote the adsorption of the unsaturated aldehyde via its C=O bond, most notably by electronic modification of the surface and formation of the electrophilic sites. Furthermore, challenges, gaps, and opportunities are identified to advance the rational design of efficient catalysts for this class of reactions, including the need for systematic studies of catalytic processes, theoretical modeling of complex materials, and model studies under ambient pressure and temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗