Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “carbohydrate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Engineering the Novel Extremophile Alga Chlamydomonas pacifica for High Lipid and High Starch Production as a Path to Developing Commercially Relevant Strains

Microalgae offer a compelling platform for the production of commodity products, due to their superior photosynthetic efficiency, adaptability to nonarable lands and nonpotable water, and their capacity to produce a versatile array of bioproducts, including biofuels and biomaterials. However, the scalability of microalgae as a bioresource has been hindered by challenges such as costly biomass production related to vulnerability to pond crashes during large-scale cultivation. This study presents a pipeline for the genetic engineering and pilot-scale production of biodiesel and thermoplastic polyurethane precursors in the extremophile species Chlamydomonas pacifica. This extremophile microalga exhibits exceptional resilience to high pH (>11.5), high salinity (up to 2% NaCl), and elevated temperatures (up to 42 °C). Initially, we evolved this strain to also have a high tolerance to high light intensity (>2000 μE/m 2 /s) through mutagenesis, breeding, and selection. We subsequently genetically engineered C. pacifica to significantly enhance lipid production by 28% and starch accumulation by 27%, all without affecting its growth rate. We demonstrated the scalability of these engineered strains by cultivating them in pilot-scale raceway ponds and converting the resulting biomass into biodiesel and thermoplastic polyurethanes. This study showcases the complete cycle of transforming a newly discovered species into a commercially relevant commodity production strain. This research underscores the potential of extremophile algae, including C. pacifica, as a key species for the burgeoning sustainable bioeconomy, offering a viable path forward in mitigating environmental challenges and supporting global bioproduct demands.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Modeling the Impacts of Hydrogen Extraction on Anaerobic Fermentation Systems Using a Modified ADM1 Model

Here, this paper presents a modified ADM1 (mADM1) model for use in assessing the influence of active dissolved H 2 extraction on biogas production from anaerobic fermentation reactors, specifically in the context of high-strength brewery wastewater as the feed. The modified model adds regulation factors to account for the varying product stoichiometry of glucose degradation reactions as a function of H 2 concentration in anaerobic digestion, and incorporates the use of both lactate and ethanol as intermediates. The changes to the model are expected to better predict the effects of H 2 removal on the production of H 2 in fermentation processes. Both ADM1 and mADM1 were calibrated against experimental data from a fluidized-bed reactor containing encapsulated acidogenic-acetogenic microbial communities treating real brewery wastewater. The calibrated models were validated against another fluidized-bed reactor identical to the calibration reactor, with the addition of a hollow-fiber membrane module that was used to reduce dissolved H 2 concentrations in the validation reactor. It was found that ADM1 over-estimated the H 2 production rates of the validation reactor (117 mL/day simulated vs. 16.48 mL/day experimental), whereas mADM1 was able to successfully predict fermentation, and specifically the H 2 production rate (17 mL/day). The presented model is a first step towards a model that can predict the effects of dissolved H 2 removal on fermentation processes.

Anaerobic Digestion↗
DOE OSTI2024

Targeting Mycobacterium tuberculosis Persistence through Inhibition of the Trehalose Catalytic Shift

Tuberculosis (TB), caused by Mycobacterium tuberculosis (Mtb), is the leading cause of death worldwide by infectious disease. Treatment of Mtb infection requires a six-month course of multiple antibiotics, an extremely challenging regimen necessitated by Mtb’s ability to form drug-tolerant persister cells. Mtb persister formation is dependent on the trehalose catalytic shift, a stress-responsive metabolic remodeling mechanism in which the disaccharide trehalose is liberated from cell surface glycolipids and repurposed as an internal carbon source to meet energy and redox demands. Here, using a biofilm-persister model, metabolomics, and cryo-electron microscopy (EM), we found that azidodeoxy- and aminodeoxy-d-trehalose analogues block the Mtb trehalose catalytic shift through inhibition of trehalose synthase TreS (Rv0126), which catalyzes the isomerization of trehalose to maltose. Out of a focused eight-member compound panel constructed by chemoenzymatic synthesis, the natural product 2-trehalosamine exhibited the highest potency and significantly potentiated first- and second-line TB drugs in broth culture and macrophage infection assays. We also report the first structure of TreS bound to a substrate analogue inhibitor, obtained via cryo-EM, which revealed conformational changes likely essential for catalysis and inhibitor binding that can potentially be exploited for future therapeutic development. Our results demonstrate that inhibition of the trehalose catalytic shift is a viable strategy to target Mtb persisters and advance trehalose analogues as tools and potential adjunctive therapeutics for investigating and targeting mycobacterial persistence.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2026

Rapid Evaluation of Amine-Functionalized Solvents for Biomass Deconstruction Using High-Throughput Screening and One-Pot Enzymatic Saccharification

Efficient and sustainable pretreatment of lignocellulosic biomass is critical for biofuel and biochemical production, yet its optimization is often hindered by slow, labor-intensive experimental methods. Here, we report the first demonstration of a custom-built, miniaturized, high-throughput screening platform integrated with one-pot enzymatic saccharification, enabling parallel evaluation of solvent type, feedstock, and temperature with minimal material use and high reproducibility. As a proof-of-concept, the HTX platform was used to screen five amine-functionalized solvents, including isopropanolamine, butylamine, N-methylbutylamine, ethanolamine, and ethanolamine acetate across three bioenergy crops (sorghum, poplar, and switchgrass) and pretreatment temperatures ranging from 80 to 140 °C. Vacuum drying successfully removed more than 99% of the solvents from the pretreated biomass, eliminating the need for water washing prior to saccharification. Isopropanolamine and N-methylbutylamine yielded the highest glucose (70–80%) and xylose (58–67%) release, with trends reflecting feedstock recalcitrance. The produced hydrolysates supported robust growth of an engineered strain of the yeast Rhodosporidium toruloides, confirming biocompatibility. This high-throughput platform provides a scalable, feedstock-agnostic framework for rapid pretreatment screening, accelerating solvent–feedstock pairing and process optimization. Its ability to integrate pretreatment, solvent removal, saccharification, and microbial conversion in a miniaturized format offers significant advantages for cost-competitive biorefinery development.

Biomass↗
DOE OSTI2021

Effective Biomass Fractionation through Oxygen-Enhanced Alkaline–Oxidative Pretreatment

The high recalcitrance of plant cell walls is an obstacle for effective chemical or biological conversion into renewable chemicals and transportation fuels. Here, we investigated the utilization of both oxygen (O 2 ) and hydrogen peroxide (H 2 O 2 ) as co-oxidants during alkaline-oxidative pretreatment to improve biomass fractionation and increase enzymatic digestibility. The oxidative pretreatment of hybrid poplar was studied over a variety of conditions. Employing O 2 in addition to H 2 O 2 as a co-oxidant during the two-stage alkaline pre-extraction/copper-catalyzed alkaline hydrogen peroxide (Cu-AHP) pretreatment process resulted in a substantial improvement in delignification relative to using H 2 O 2 alone during the second-stage Cu-AHP pretreatment, leading to high overall sugar yields even at H 2 O 2 loadings as low as 2% (w/w of original biomass). The presence of H 2 O 2 , however, was both critical and synergistic. Performing analogous reactions in the absence of H 2 O 2 resulted in approximately 25% less delignification and a 30% decrease in sugar yields. Here, the lignin isolated from this dual oxidant second stage had high aliphatic hydroxyl group content and reactivity to isocyanate, indicating that it is a promising substrate for the production of polyurethanes. To test the suitability of the isolated lignin as a source of aromatic monomers, the lignin was subjected to a sequential Bobbitt’s salt oxidation followed by formic-acid catalyzed depolymerization process. Monomer yields of approximately 17% (w/w) were obtained, and the difference in yields was not significant between lignin isolated from our Cu-AHP process with and without O 2 as a co-oxidant. Thus, the addition of O 2 did not lead to significant lignin crosslinking, a result consistent with the two-dimensional heteronuclear single-quantum coherence (2D HSQC) NMR spectra of the isolated lignin.

09 BIOMASS FUELS↗
DOE OSTI2021

Innovative and Economically Beneficial Use of Corn and Corn Products in Electrochemical Energy Storage Applications

The United States is by far the largest corn producer worldwide, with corn yields steadily increasing for the past decades. In many midwestern U.S. states such as Iowa, Illinois, and Nebraska, corn farmers currently grow more corn than consumers can utilize as human food or animal feed. To sustain the economic viability of corn farmers, it is critical that new uses and markets for corn, corn byproducts from harvesting, corn industrial products, and corn byproducts from industrial processing should be discovered, giving the highest return to corn producers. With the increasing popularity of electric vehicles and grid-level energy storage systems for renewable energy, there has been an ever-growing interest in improving existing energy storage technologies as well as developing new ones. During this development, a great amount of effort has been focused on exploiting cost-effective solutions utilizing sustainable materials derived from renewable biomass. Here, innovative and economically beneficial uses of corn and corn products in various energy storage applications, such as lithium-ion batteries, solid-state batteries, and redox flow batteries, are looked at comprehensively, which may shed light on how to establish an environmentally sustainable, technically feasible, and economically beneficial solution to support the corn industry.

25 ENERGY STORAGE↗
DOE OSTI2021

Generation of Pseudomonas putida KT2440 Strains with Efficient Utilization of Xylose and Galactose via Adaptive Laboratory Evolution

While Pseudomonas putida KT2440 has great potential for biomass-converting processes, its inability to utilize the biomass abundant sugars xylose and galactose has limited its applications. Here, in this study, we utilized Adaptive Laboratory Evolution (ALE) to optimize engineered KT2440 with heterologous expression of xylD encoding xylonate dehydratase from Caulobacter crescentus and galETKM encoding UDP-glucose 4-epimerase, galactose-1-phosphate uridylyltransferase, galactokinase, and galactose-1-epimerase from Escherichia coli K-12 MG1655. Poor starting strain growth (<0.1 h –1 or none) was evolutionarily optimized to rates of up to 0.25 h –1 on xylose and 0.52 h –1 on galactose. Whole-genome sequencing, transcriptomic analysis, and growth screens revealed significant roles of kguT encoding a 2-ketogluconate operon repressor and 2-ketogluconate transporter, and gtsABCD encoding an ATP-binding cassette (ABC) sugar transporting system in xylose and galactose growth conditions, respectively. Finally, we expressed the heterologous indigoidine production pathway in the evolved and unevolved engineered strains and successfully produced 3.2 g/L and 2.2 g/L from 10 g/L of either xylose or galactose in the evolved strains whereas the unevolved strains did not produce any detectable product. Thus, the generated KT2440 strains have the potential for broad application as optimized platform chassis to develop efficient microorganism-based biomass-utilizing bioprocesses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Ultrasound-Assisted Nonthermal, Nonequilibrium Separation of Organic Molecules from Their Binary Aqueous Solutions: Effect of Solute Properties on Separation

The separation of organic molecules in downstream processes, such as distillation, plays a vital role in biobased chemical production. A comprehensive study was performed here using ultrasonic energy to separate 11 organic molecules from their binary aqueous solutions under nonthermal, nonequilibrium, and phase-change free conditions. A batch sonoseparator with a three-stage mist collection unit allowed direct analysis of ultrasound-generated mist with an HPLC/GC and differentiation and quantification of the vapor and mist. The results showed that the alcohols (1-butanol, ethanol, 1-propanol, and methanol) and acetone were enriched in the ultrasound-generated mist with enrichment ratios of 3.2–5. On the other hand, ethylene glycol, glycerol, γ-valerolactone (GVL), glucose, and sucrose were diluted with dilution ratios in the range of 2.04–15.7 in the mist and vapor generated by ultrasound (or concentrated in the bulk solution). No enrichment nor dilution of acetic acid was observed. The role of various physicochemical parameters such as dynamic viscosity, surface tension, Henry’s law of solubility constant, vapor pressure, and octanol–water partition coefficient in the enrichment was examined. Furthermore, the hydrophobicity of the organic molecules represented by the octanol–water partition coefficient was found to play a crucial role in determining the separation characteristics of the molecules in ultrasound-generated mist and vapor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Production of a δ-Lactam from Glucose through Integrating Biological and Chemical Catalysis

We present a new strategy for the production of a δ-lactam from glucose that integrates biological production of triacetic acid lactone (TAL, 4-hydroxy-6-methyl-2H-2-one) with catalytic transformation of TAL into 6-methylpiperidin-2-one (MPO) through metabolic engineering, isomerization, amination, and catalytic hydrogenation/hydrogenolysis. We developed a sustainable and antibiotic-free fed-batch fermentation using genetically modified Rhodotorula toruloides IFO0880. This process achieved a yield of 2-hydroxy-6-methyl-4H-pyran-4-one (2H4P) at 0.05 g/g of glucose, corresponding to a 9.9 g/L titer. By adjusting the pH of the fermentation broth to 2, 2H4P was quantitatively converted into TAL. The TAL in the fermentation broth was directly converted by aminolysis into 4-hydroxy-6-methylpyridin-2(1H)-one (HMPO), which achieved an 18.5% yield with 94.3% purity. The HMPO yield was lower in the fermentation broth than in a clean feedstock (32.2%), suggesting that the biological impurities are inhibitors in this reaction. Further investigation revealed that lower pH levels and reduced TAL concentrations in the fermentation broth significantly decreased HMPO yields. Subsequently, the precipitated HMPO was filtered and dried and then subjected to the final catalytic conversion in H2O solvent, achieving a MPO yield of 91.8%. Furthermore, this integrated approach demonstrated the direct use of TAL in the filtered aqueous fermentation broth without the need to isolate TAL.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗