Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “beam loading”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

The effect of low velocity impact on the strength characteristics of composite materials laminates

The nonlinear and dynamic response of composite structures to impact loading conditions was investigated. The convergence of both finite element and finite difference solution procedures was investigated with this configuration. The response of composite beams and plates to impact were examined. Fundamental data on the indentation and flexural response of both plate and beam geometry were collected. Numerical analyses were extended to the study of circular plates subjected to impact loading. Further work was done in modeling the response to simulated impact loading through careful modeling of the momentum transfer from impactor to target. The modeling methodology and solution procedures were well tested and verified. A computer program for the solution of circular plate problems was developed and is under testing.

Liebowitz, H.↗

Compensation of beamlet repulsion in a large negative ion source with a multi aperture accelerator

Excess heat loads to accelerator grids limit extension of pulse length in operation of the large negative ion sources with multi aperture accelerator. Part of the heat loads is caused by interception of deflected beamlets due to their space charge repulsion. In this paper, a beamlet steering technique using aperture offset was examined for compensation of the beamlet deflections utilizing a three dimensional beam analysis simulating the D{sup -} negative ion source of JT-60 U. The beamlet deflection was analyzed in detail using fifty beamlets, which were extracted from apertures arranged in a lattice pattern of 10x5. The simulation showed successful compensation of the beamlet deflection by aperture offsets defined according to the thin lens theory. Even if the beam energy was changed, the necessary aperture offset would not be changed maintaining the perveance and a ratio of extraction and acceleration voltage. In JT-60 U, it was shown that the aperture offset of less than 1.0 mm would be enough to compensate the repulsion of all beamlets. When the magnetic field was applied for suppression of co-extracted electrons, necessary aperture offset was estimated to be {+-}0.5 mm for 500 keV D{sup -} ion beam in JT-60 U, in addition to the offset for the space charge repulsion. This result showed good agreements with the previous experimental results and design study of the JT-60 U N-NBI.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Status of Coherent Cherenkov Wakefield Experiment at UCLA

Coherent Cherenkov radiation (CCR) wakefields are produced when a compressed electron beam travels along the axis of a hollow cylindrical dielectric tube. In a dielectric wakefield accelerator (DWA) these wakefields accelerate either a trailing electron bunch or the tail of the driving bunch, depending on the modal structure of the radiation. For an appropriate choice of dielectric structure geometry and beam parameters the device operates in a single-mode regime, producing sinusoidal wakefields with wavelengths in the THz range. We report on preliminary results of an experiment at UCLA studying the potential of a DWA structure to produce high-power, narrow-band THz radiation. First measurements include observation of 1 MW peak-power pulses of coherent broadband radiation from a compact dipole beam dump magnet.

43 PARTICLE ACCELERATORS↗

Super-radiant backward-wave oscillators with enhanced power conversion

We propose a method for a very significant increase of the peak power of a backward-wave electron oscillator operating in the non-stationary regime of the super-radiation of short rf pulses. This method is based on sectioning: a regular self-oscillator section is supported with a section providing amplification of the super-radiant pulse. Profiling of a resonant parameter in the amplifying section is used to avoid the parasitic self-excitation and to increase the efficiency of the electron-wave interaction. In such systems, the conversion factor (the ratio between the rf pulse power and the electron beam power) can achieve a few hundred percent.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Preliminary design and optimization of a G-band extended interaction oscillator based on a pseudospark-sourced electron beam

The design and simulation of a G-band extended interaction oscillator (EIO) driven by a pseudospark-sourced electron beam is presented. The characteristic of the EIO and the pseudospark-based electron beam were studied to enhance the performance of the newly proposed device. The beam-wave interaction of the EIO can be optimized by choosing a suitable pseudospark discharging voltage and by widening the operating voltage region of the EIO circuit. Simulation results show that a peak power of over 240 W can be achieved at G-band using a pseudospark discharge voltage of 41 kV.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Preliminary experimental investigation of a complex dual-band high power microwave source

In order to promote the power conversion efficiency of a magnetically insulated transmission line oscillator (MILO) and obtain microwaves in dual bands, an axially extracted C-band virtual cathode oscillator (VCO) with multiple resonant cavities is introduced to partially utilize the load current of an S-band MILO. The formed novel dual-band high power microwave source called MILO and VCO is investigated with simulation and experimentally. A dual-band radiation antenna is designed to effectively radiate microwaves generated by the MILO and the VCO, respectively, while avoiding them being influenced by the microwave reflection and diffraction. The preliminary experimental results measured by the dual-band diagnostic system show that both the MILO and the VCO operate normally under repeated shots. A microwave of 2.1 GHz, 1.70 GW is generated from the MILO and a 0.37 GW microwave at frequencies of 4.1 GHz and 3.8 GHz is generated from the VCO under the condition of about 440 kV and 35 kA. Compared with a single MILO (10.6%), a MILO and VCO achieves higher total power and efficiency (13.4%) in both S and C bands, indicating that the load current of the MILO partially couples into the beam-wave interaction in the VCO and then contributes to the output microwaves. However, more works are needed regarding the spectrum purification of the VCO and promotion of the output power of both the MILO and the VCO.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Generating Intense Attosecond X-Ray Pulses Using Ultraviolet-Laser-Induced Microbunching in Electron Beams

We propose a scheme that combines the echo-enabled harmonic generation technique with the bunch compression and allows to generate harmonic numbers of a few hundred in a microbunched beam through up-conversion of the frequency of an ultraviolet seed laser. Sending this beam through a short undulator results in an isolated sub-100 attoseconds pulse of x-ray radiation. Using a representative realistic set of parameters, we show that 1 nm x-ray pulse with peak power exceeding 100 MW and duration as short as 34 attoseconds (FWHM) can be generated from a 200 nm ultraviolet seed laser.

43 PARTICLE ACCELERATORS↗

A Compact Soft X-Ray Free-Electron Laser Facility Based on a Dielectric Wakefield Accelerator

X-ray free-electron lasers (FELs) are expensive instruments with the accelerator holding the largest portion of the cost of the entire facility. Using a high-energy gain dielectric wakefield accelerator (DWA) instead of the conventional accelerator may reduce the facility size and, significantly, its cost. We show that a collinear dielectric wakefield accelerator can, in principle, accelerate low charge and high peak current electron bunches to a few GeV energy with up to 100-kHz bunch repetition rate. Several such accelerators can share the same tunnel and cw superconducting linac (operating with a few-MHz bunch repetition rate), whose sole purpose is feeding the DWAs with wake producing low-energy, high-charge electron bunches with the desired periodicity. Then, ten or more x-ray FELs can operate independently, each using its own linac. In this paper, we present an initial case study of a single-stage 850-GHz DWA based on a quartz tube with a ~100-MV/m loaded gradient sufficient to accelerate a 50-pC main electron beam to 2.4 GeV at a 100-kHz bunch repetition rate in just under 30 meters. While the accelerated electron beam has a large energy chirp, we show that FEL gain can be maintained by appropriately tapering the undulator, although other schemes may also be possible.

43 PARTICLE ACCELERATORS↗

Development and Testing of Advanced Accelerator Structures and Technologies at 11.424 GHz (Final Report)

The areas of activity are grouped by Task. Task 1 involved a study of the key physics issues associated with the use of high gradient dielectric-loaded accelerating (DLA) structures in rf linear accelerators, and was carried out in collaboration with Argonne National Laboratory (ANL) and Euclid Techlabs LLC; Task 2 involved a study of high-gain active microwave pulse compressors, and was carried out in collaboration with Omega-P, Inc. and the Institute of Applied Physics of the Russian Academy of Sciences. The experiments were carried out in the X-band Magnicon Laboratory at the Naval Research Laboratory (NRL). The studies under Task 1 were focused on multipactor and breakdown in externally driven DLA structures at the 200-ns timescale. Suppression of multipactor and breakdown are essential to the practical application of dielectric structures in rf linear accelerators. During the first year of this program, we carried out a study of a doubly tapered clamped quartz traveling-wave (TW) structure that operated at up to 15 MV/m without breakdown by eliminating dielectric joints, thus avoiding the joint breakdown that had characterized many earlier experiments. However, strong multipactor loading was observed in the structure. In the second year, we carried out a successful test of a TW DLA structure with a sputtered copper exterior coating that eliminated the need for a clamped metal enclosure to form the outer metallic boundary, thus simplifying the fabrication of the structure. In the second year, we also carried out the first test of a dielectric-loaded standing-wave (SW) accelerating structure. Multipactor loading limited the achievable accelerating gradient in the structure to 9 MV/m, but the SW structure proved to be a useful configuration for studying multipactor physics. To continue this study, a new standing-wave structure is in preparation that will permit direct measurements of the energy stored in the structure for new studies of multipactor physics. Finally, in the third year of the program, we focused on the suppression of multipactor loading using an applied axial magnetic field, as proposed by Chang et al. [C. Chang et al., J. Appl. Phys. 110, 063304 (2011).]. Chang used an analytic model and PIC simulations to show that an axial magnetic field can reduce the period of the secondary electron trajectories on the dielectric surface, and thus spoil the multipactor resonance condition. The optimum effect occurs when the ratio of the gyrofrequency to the rf frequency is in the range of ~ 0.7 to 1. For an X-band structure, this is equivalent to a solenoidal field of 2.8–4 kG. This approach to multipactor suppression is attractive because it maintains the advantages of a DLA structure and is independent of other accelerator parameters.

43 PARTICLE ACCELERATORS↗

The space revolution NASA News Release

Comparison of ultimate load carrying capacity of laterally restrained/unrestrained, reinforced/unreinforced cement mortar model beams and two-way panels

INDUSTRY↗

BUCLASP 2: A computer program for instability analysis of biaxially loaded composite stiffened panels and other structures

The use of the computer program BUCLASP2 is described. The program is intended for linear instability analyses of structures such as unidirectionally stiffened panels. Any structure that has a constant cross section in one direction, that may be idealized as an assemblage of beam elements and laminated flat and curved plant strip elements can be analyzed. The loadings considered are combinations of axial compressive loads and in-plane transverse loads. The two parallel ends of the panel must be simply supported and arbitrary elastic boundary conditions may be imposed along any one or both external longitudinal side. This manual consists of instructions for use of the program with sample problems, including input and output information. The theoretical basis of BUCLASP2 and correlations of calculated results with known solutions, are presented.

Tripp, L. L.↗

Microwave power tubes for space applications

Feasibility evaluations of klystron amplifiers for conversion of solar power in synchronous orbit into microwave power at 2.4 GHz and transmission to earth were carried out. It was found that amplitrons and klystrons, using a depressed collector augmentation, can achieve efficiencies in excess of 80% if the power output is kept higher than 50 kW. Body wound selenoid provides the needed beam-focusing field. Narrow bandwidth requirements permit a low cathode loading density of 0.5 A/sq cm produced at approximately 850 centigrades. Emission tests indicate a potential life expectancy of 20 to 40 years.

Kosmahl, H.↗

An investigation of the vibration characteristics of shrouded-bladed-disk rotor stages

Coupled differential equations of motion are given for application to a rotating, pretwisted and heated beam under the effects of thermal stresses and gas bending loads. The circumferential modes of the multi-blade vibration of a bladed-disk rotor stage were studied. A finite element method was developed for the dynamic and static deformation analysis of the blade. The deformations of a bladed disk and a shrouded-bladed disk were studied by introducing a special bladed-disk element and a special shrouded-blade element. Some features of the vibration of part-span-shrouded, bladed-disk rotor stages are discussed. The static deformation, thermal stress and gas bending effects on the blade vibration were presented previously.

Chen, L.-T.↗

Stress intensity factors and COD in an orthotropic strip

The elasticity problem for an orthotropic strip or a beam with an internal or an edge crack under general loading conditions is considered. The numerical results are given for four basic loading conditions, namely, uniform tension, pure bending, three point bending, and concentrated surface shear loading. For the strip with an edge crack additional results regarding the crack opening displacements are obtained by using the plastic strip model. A critical quantity which is tabulated is the maximum compressive stress in the plane of the crack. It is shown that this stress may easily exceed the yield limit in compression and hence may severely limit the range of application of the plasticity results.

Kaya, A. C.↗

Experience on the use of MOSTAB-HFW computer code for horizontal-axis wind turbines

Three topics are covered dealing with the frequencies of a rotating beam, the use of the fundamental mode of a uniform cantilever beam, and the analysis of resonance dwell. Immensely high peak loads were generated by the code for resonance dwell indicating further need for including structural damping and for transient analysis capability. The effect of structural damping, newly incorporated in the code, is described.

Yu, Y. Y.↗

Simultaneous analysis and design for eigenvalue maximization

A simultaneous analysis and design approach to the maximization of buckling or vibration eigenvalues is presented. Both unimodal and bimodal optimum solutions are considered. A discretization of the structure and response is used to obtain sets of nonlinear algebraic equations which are solved numerically. The formulation is applied to the solution of the optimum design of a beam-column supported by an elastic foundation for maximum buckling load. Two cases are considered: the optimum design of the column for a given foundation and the optimum design of the foundation for a given column. Results are compared to published solutions when possible.

Plaut, Raymond H.↗

The Effect of the Angle of Afterbody Keel on the Water Performance of a Flying-Boat Hull Model

NACA model 11-C was tested according to the general method with the angle of afterbody keel set at five different angles from 2-1/2 degrees to 9 degrees, but without changing other features of the hull. The results of the tests are expressed in curves of test data and of non-dimensional coefficients. At the depth of step used in the tests, 3.3 percent beam, the smaller angles of afterbody keel give greater load-resistance ratios at the hump speed and smaller at high speed than the larger angles of afterbody keel. Comparisons are made of the load-resistance ratios at several other points in the speed range. The effect of variation of the angle of afterbody keel upon the take-off performance of a hypothetical flying boat of 15,000 pounds gross weight having a hull of model 11-C lines is calculated, and the calculations show that the craft with the largest of the angles of afterbody keel tested, 9 degrees, takes off in the least time and distance.

Allison, John M.↗